Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
1c1c8e442a (diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80)
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
`IntoFuture::into_future` is no longer unstable
We don't need to gate the `IntoFuture::into_future` call in `.await` lowering anymore.
``@bors`` rollup
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Remove the size of locals heuristic in MIR inlining
This heuristic doesn't necessarily correlate to complexity of the MIR Body. In particular, a lot of straight-line code in MIR tends to never reuse a local, even though any optimizer would effectively reuse the storage or just put everything in registers. So it doesn't even necessarily make sense that this would be a stack size heuristic.
So... what happens if we just delete the heuristic? The benchmark suite improves significantly. Less heuristics better?
r? `@cjgillot`
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Deduplicate unreachable blocks, for real this time
In https://github.com/rust-lang/rust/pull/106428 (in particular 41eda69516) we noticed that inlining `unreachable_unchecked` can produce duplicate unreachable blocks. So we improved two MIR optimizations: `SimplifyCfg` was given a simplify to deduplicate unreachable blocks, then `InstCombine` was given a combiner to deduplicate switch targets that point at the same block. The problem is that change doesn't actually work.
Our current pass order is
```
SimplifyCfg (does nothing relevant to this situation)
Inline (produces multiple unreachable blocks)
InstCombine (doesn't do anything here, oops)
SimplifyCfg (produces the duplicate SwitchTargets that InstCombine is looking for)
```
So in here, I have factored out the specific function from `InstCombine` and placed it inside the simplify that produces the case it is looking for. This should ensure that it runs in the scenario it was designed for.
Fixes https://github.com/rust-lang/rust/issues/110551
r? `@cjgillot`
Refactor unwind in MIR
This makes unwinding from current `Option<BasicBlock>` into
```rust
enum UnwindAction {
Continue,
Cleanup(BasicBlock),
Unreachable,
Terminate,
}
```
cc `@JakobDegen` `@RalfJung` `@Amanieu`
Check pattern refutability on THIR
The current `check_match` query is based on HIR, but partially re-lowers HIR into THIR.
This PR proposed to use the results of the `thir_body` query to check matches, instead of re-building THIR.
Most of the diagnostic changes are spans getting shorter, or commas/semicolons not getting removed.
This PR degrades the diagnostic for confusing constants in patterns (`let A = foo()` where `A` resolves to a `const A` somewhere): it does not point ot the definition of `const A` any more.
Insert alignment checks for pointer dereferences when debug assertions are enabled
Closes https://github.com/rust-lang/rust/issues/54915
- [x] Jake tells me this sounds like a place to use `MirPatch`, but I can't figure out how to insert a new basic block with a new terminator in the middle of an existing basic block, using `MirPatch`. (if nobody else backs up this point I'm checking this as "not actually a good idea" because the code looks pretty clean to me after rearranging it a bit)
- [x] Using `CastKind::PointerExposeAddress` is definitely wrong, we don't want to expose. Calling a function to get the pointer address seems quite excessive. ~I'll see if I can add a new `CastKind`.~ `CastKind::Transmute` to the rescue!
- [x] Implement a more helpful panic message like slice bounds checking.
r? `@oli-obk`
Use span of placeholders in format_args!() expansion.
`format_args!("{}", x)` expands to something that contains `Argument::new_display(&x)`. That entire expression was generated with the span of `x`.
After this PR, `&x` uses the span of `x`, but the `new_display` call uses the span of the `{}` placeholder within the format string. If an implicitly captured argument was used like in `format_args!("{x}")`, both use the span of the `{x}` placeholder.
This fixes https://github.com/rust-lang/rust/issues/109576, and also allows for more improvements to similar diagnostics in the future, since the usage of `x` can now be traced to the exact `{}` placeholder that required it to be `Display` (or `Debug` etc.)
Thanks to the combination of #108246 and #108442 it could already remove identity transmutes.
With this PR, it can also simplify them to `IntToInt` casts, `Discriminant` reads, or `Field` projections.
Permit the MIR inliner to inline diverging functions
This heuristic prevents inlining of `hint::unreachable_unchecked`, which in turn makes `Option/Result::unwrap_unchecked` a bad inlining candidate. I looked through the changes to `core`, `alloc`, `std`, and `hashbrown` by hand and they all seem reasonable. Let's see how this looks in perf...
---
Based on rustc-perf it looks like this regresses ctfe-stress, and the cachegrind diff indicates that this regression is in `InterpCx::statement`. I don't know how to do any deeper analysis because that function is _enormous_ in the try toolchain, which has no debuginfo in it. And a local build produces significantly different codegen for that function, even with LTO.
Simpler checked shifts in MIR building
Doing masking to check unsigned shift amounts is overcomplicated; just comparing the shift directly saves a statement and a temporary, as well as is much easier to read as a human. And shifting by unsigned is the canonical case -- notably, all the library shifting methods (that don't support every type) take shift RHSs as `u32` -- so we might as well make that simpler since it's easy to do so.
This PR also changes *signed* shift amounts to `IntToInt` casts and then uses the same check as for unsigned. The bit-masking is a nice trick, but for example LLVM actually canonicalizes it to an unsigned comparison anyway <https://rust.godbolt.org/z/8h59fMGT4> so I don't think it's worth the effort and the extra `Constant`. (If MIR's `assert` was `assert_nz` then the masking might make sense, but when the `!=` uses another statement I think the comparison is better.)
To review, I suggest looking at 2ee0468c49 first -- that's the interesting code change and has a MIR diff.
My favourite part of the diff:
```diff
- _20 = BitAnd(_19, const 340282366920938463463374607431768211448_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
- _21 = Ne(move _20, const 0_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
- assert(!move _21, "attempt to shift right by `{}`, which would overflow", _19) -> [success: bb3, unwind: bb7]; // scope 0 at $DIR/shifts.rs:+2:34: +2:44
+ _18 = Lt(_17, const 8_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
+ assert(move _18, "attempt to shift right by `{}`, which would overflow", _17) -> [success: bb3, unwind: bb7]; // scope 0 at $DIR/shifts.rs:+2:34: +2:44
```
Updates `interpret`, `codegen_ssa`, and `codegen_cranelift` to consume the new cast instead of the intrinsic.
Includes `CastTransmute` for custom MIR building, to be able to test the extra UB.
Custom MIR: Allow optional RET type annotation
This currently doesn't compile because the type of `RET` is inferred, which fails if RET is a composite type and fields are initialised separately.
```rust
#![feature(custom_mir, core_intrinsics)]
extern crate core;
use core::intrinsics::mir::*;
#[custom_mir(dialect = "runtime", phase = "optimized")]
fn fn0() -> (i32, bool) {
mir! ({
RET.0 = 0;
RET.1 = true;
Return()
})
}
```
```
error[E0282]: type annotations needed
--> src/lib.rs:8:9
|
8 | RET.0 = 0;
| ^^^ cannot infer type
For more information about this error, try `rustc --explain E0282`.
```
This PR allows the user to manually specify the return type with `type RET = ...;` if required:
```rust
#[custom_mir(dialect = "runtime", phase = "optimized")]
fn fn0() -> (i32, bool) {
mir! (
type RET = (i32, bool);
{
RET.0 = 0;
RET.1 = true;
Return()
}
)
}
```
The syntax is not optimal, I'm happy to see other suggestions. Ideally I wanted it to be a normal type annotation like `let RET: ...;`, but this runs into the multiple parsing options error during macro expansion, as it can be parsed as a normal `let` declaration as well.
r? ```@oli-obk``` or ```@tmiasko``` or ```@JakobDegen```
move Option::as_slice to intrinsic
````@scottmcm```` suggested on #109095 I use a direct approach of unpacking the operation in MIR lowering, so here's the implementation.
cc ````@nikic```` as this should hopefully unblock #107224 (though perhaps other changes to the prior implementation, which I left for bootstrapping, are needed).
Use index based drop loop for slices and arrays
Instead of building two kinds of drop pair loops, of which only one will be eventually used at runtime in a given monomorphization, always use index based loop.
Wrap the whole LocalInfo in ClearCrossCrate.
MIR contains a lot of information about locals. The primary purpose of this information is the quality of borrowck diagnostics.
This PR aims to drop this information after MIR analyses are finished, ie. starting from post-cleanup runtime MIR.
Implement checked Shl/Shr at MIR building.
This does not require any special handling by codegen backends,
as the overflow behaviour is entirely determined by the rhs (shift amount).
This allows MIR ConstProp to remove the overflow check for constant shifts.
~There is an existing different behaviour between cg_llvm and cg_clif (cc `@bjorn3).`
I took cg_llvm's one as reference: overflow if `rhs < 0 || rhs > number_of_bits_in_lhs_ty`.~
EDIT: `cg_llvm` and `cg_clif` implement the overflow check differently. This PR uses `cg_llvm`'s implementation based on a `BitAnd` instead of `cg_clif`'s one based on an unsigned comparison.
Ensure `ptr::read` gets all the same LLVM `load` metadata that dereferencing does
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`. Trying to narrow it down, it seems that was because `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
The root cause is that `ptr::read` is currently implemented via the *untyped* `copy_nonoverlapping`, and thus the `load` doesn't get any type-aware metadata: no `noundef`, no `!range`. This PR solves that by lowering `ptr::read(p)` to `copy *p` in MIR, for which the backends already do the right thing.
Fortuitiously, this also improves the IR we give to LLVM for things like `mem::replace`, and fixes a couple of long-standing bugs where `ptr::read` on `Copy` types was worse than `*`ing them.
Zulip conversation: <https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Move.20array.3A.3AIntoIter.20to.20ManuallyDrop/near/341189936>
cc `@erikdesjardins` `@JakobDegen` `@workingjubilee` `@the8472`
Fixes#106369Fixes#73258
Instead of building two kinds of drop pair loops, of which only one will
be eventually used at runtime in a given monomorphization, always use
index based loop.
Remove `identity_future` indirection
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]`annotation.
Fixes https://github.com/rust-lang/rust/issues/104826.
Remove `box_syntax`
r? `@Nilstrieb`
This removes the feature `box_syntax`, which allows the use of `box <expr>` to create a Box, and finalises removing use of the feature from the compiler. `box_patterns` (allowing the use of `box <pat>` in a pattern) is unaffected.
It also removes `ast::ExprKind::Box` - the only way to create a 'box' expression now is with the rustc-internal `#[rustc_box]` attribute.
As a temporary measure to help users move away, `box <expr>` now parses the inner expression, and emits a `MachineApplicable` lint to replace it with `Box::new`
Closes#49733
Strengthen state tracking in const-prop
Some/many of the changes are replicated between both the const-prop lint and the const-prop optimization.
Behaviour changes:
- const-prop opt does not give a span to propagated values. This was useless as that span's primary purpose is to diagnose evaluation failure in codegen.
- we remove the `OnlyPropagateInto` mode. It was only used for function arguments, which are better modeled by a write before entry.
- the tracking of assignments and discriminants make clearer that we do nothing in `NoPropagation` mode or on indirect places.
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`.
Turned out to be a more general problem as `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
This PR lowers `ptr::read(p)` to `copy *p` in MIR, which fortuitiously also improves the IR we give to LLVM for things like `mem::replace`.
Rollup of 8 pull requests
Successful merges:
- #108754 (Retry `pred_known_to_hold_modulo_regions` with fulfillment if ambiguous)
- #108759 (1.41.1 supported 32-bit Apple targets)
- #108839 (Canonicalize root var when making response from new solver)
- #108856 (Remove DropAndReplace terminator)
- #108882 (Tweak E0740)
- #108898 (Set `LIBC_CHECK_CFG=1` when building Rust code in bootstrap)
- #108911 (Improve rustdoc-gui/tester.js code a bit)
- #108916 (Remove an unused return value in `rustc_hir_typeck`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Do not consider `&mut *x` as mutating `x` in `CopyProp`
This PR removes an unfortunate overly cautious case from the current implementation.
Found by https://github.com/rust-lang/rust/pull/105274 cc `@saethlin`
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]` annotation.
This commit desugars the drop and replace deriving from an
assignment at MIR build, avoiding the construction of the
DropAndReplace terminator (which will be removed in a followign PR)
In order to retain the same error messages for replaces a new
DesugaringKind::Replace variant is introduced.
Stabilize `#![feature(target_feature_11)]`
## Stabilization report
### Summary
Allows for safe functions to be marked with `#[target_feature]` attributes.
Functions marked with `#[target_feature]` are generally considered as unsafe functions: they are unsafe to call, cannot be assigned to safe function pointers, and don't implement the `Fn*` traits.
However, calling them from other `#[target_feature]` functions with a superset of features is safe.
```rust
// Demonstration function
#[target_feature(enable = "avx2")]
fn avx2() {}
fn foo() {
// Calling `avx2` here is unsafe, as we must ensure
// that AVX is available first.
unsafe {
avx2();
}
}
#[target_feature(enable = "avx2")]
fn bar() {
// Calling `avx2` here is safe.
avx2();
}
```
### Test cases
Tests for this feature can be found in [`src/test/ui/rfcs/rfc-2396-target_feature-11/`](b67ba9ba20/src/test/ui/rfcs/rfc-2396-target_feature-11/).
### Edge cases
- https://github.com/rust-lang/rust/issues/73631
Closures defined inside functions marked with `#[target_feature]` inherit the target features of their parent function. They can still be assigned to safe function pointers and implement the appropriate `Fn*` traits.
```rust
#[target_feature(enable = "avx2")]
fn qux() {
let my_closure = || avx2(); // this call to `avx2` is safe
let f: fn() = my_closure;
}
```
This means that in order to call a function with `#[target_feature]`, you must show that the target-feature is available while the function executes *and* for as long as whatever may escape from that function lives.
### Documentation
- Reference: https://github.com/rust-lang/reference/pull/1181
---
cc tracking issue #69098
r? `@ghost`
Correctly handle aggregates in DataflowConstProp
The previous implementation from https://github.com/rust-lang/rust/pull/107411 flooded target of an aggregate assignment with `Bottom`, corresponding to the `deinit` that the interpreter does.
As a consequence, when assigning `target = Enum::Variant#i(...)` all the `(target as Variant#j)` were at `Bottom` while they should have been `Top`.
This PR replaces that flooding with `Top`.
Aside, it corrects a second bug where the wrong place would be used to assign to enum variant fields, resulting to nothing happening.
Fixes https://github.com/rust-lang/rust/issues/108166
Don't ICE in `might_permit_raw_init` if reference is polymorphic
Emitting optimized MIR for a polymorphic function may require computing layout of a type that isn't (yet) known. This happens in the instcombine pass, for example. Let's fail gracefully in that condition.
cc `@saethlin`
fixes#107999
Handle discriminant in DataflowConstProp
cc ``@jachris``
r? ``@JakobDegen``
This PR attempts to extend the DataflowConstProp pass to handle propagation of discriminants. We handle this by adding 2 new variants to `TrackElem`: `TrackElem::Variant` for enum variants and `TrackElem::Discriminant` for the enum discriminant pseudo-place.
The difficulty is that the enum discriminant and enum variants may alias each another. This is the issue of the `Option<NonZeroUsize>` test, which is the equivalent of https://github.com/rust-lang/unsafe-code-guidelines/issues/84 with a direct write.
To handle that, we generalize the flood process to flood all the potentially aliasing places. In particular:
- any write to `(PLACE as Variant)`, either direct or through a projection, floods `(PLACE as OtherVariant)` for all other variants and `discriminant(PLACE)`;
- `SetDiscriminant(PLACE)` floods `(PLACE as Variant)` for each variant.
This implies that flooding is not hierarchical any more, and that an assignment to a non-tracked place may need to flood a tracked place. This is handled by `for_each_aliasing_place` which generalizes `preorder_invoke`.
As we deaggregate enums by putting `SetDiscriminant` last, this allows to propagate the value of the discriminant.
This refactor will allow to make https://github.com/rust-lang/rust/pull/107009 able to handle discriminants too.
Clearly document intentional UB in mir-opt tests
All of the changed mir-opt test input files did not pass Miri. Now they do.
r? `@cjgillot` because there's a CopyProp test in here that I do not fully understand
Mir-Opt for copying enums with large discrepancies
I have been meaning to make this for quite a while, based off of this [hackmd](https://hackmd.io/`@ft4bxUsFT5CEUBmRKYHr7w/rJM8BBPzD).`
I'm not sure where to put this opt now that I've made it, so I'd appreciate suggestions on that!
It's also one long chain of statements, not sure if there's a more friendly format to make it.
r? `@tmiasko`
I would `r` oli but he's on leave so he suggested I `r` tmiasko or wesleywiser.
Turn projections into copies in CopyProp.
The current implementation can leave behind projections that are moved out several times.
This PR widens the check to turn such moves into copies: a move out of a projection of a copy is equivalent to a copy of the original projection.
There is a distinction between running this on wasm and i686, even though they should be
identical. This technically is not _incorrect_, it's just an unexpected difference, which is
worth investigating, but not for correctness.
