MIPS64 targets under OpenWrt require soft-float fpu support.
Rust-lang requires soft-float defined in tuple definition and
isn't over-ridden by toolchain compile-time CFLAGS/LDFLAGS
Set explicit soft-float for tuple.
Signed-off-by: Donald Hoskins <grommish@gmail.com>
Currently, we are thinking to use *-unknown-none targets instead
to define for every platform our own one (see hermitcore/rusty-hermit#197).
However, the current target aarch64-unknown-none-softfloat doesn't support
dynamic relocation. Our kernel uses this feature and consequently
we define a new target aarch64-unknown-hermitkernel to support it.
Add more *-unwind ABI variants
The following *-unwind ABIs are now supported:
- "C-unwind"
- "cdecl-unwind"
- "stdcall-unwind"
- "fastcall-unwind"
- "vectorcall-unwind"
- "thiscall-unwind"
- "aapcs-unwind"
- "win64-unwind"
- "sysv64-unwind"
- "system-unwind"
cc `@rust-lang/wg-ffi-unwind`
Add new target armv7-unknown-linux-uclibceabi (softfloat)
This adds the new target `armv7-unknown-linux-uclibceabi (softfloat)`. It is of course similar to `armv7-unknown-linux-uclibceabihf (hardfloat)` which was just recently added to rust except that it is `softfloat`.
My interest lies in the Broadcom BCM4707/4708/BCM4709 family, notably found in some Netgear and Asus consumer routers. The armv7 Cortex-A9 cpus found in these devices do not have an fpu or NEON support.
With this patch I've been able to bootstrap rustc, std and host tools `(extended = true)` to run on the target device for native compilation, allowing the target to be used as a development platform.
With the recent addition of `armv7-unknown-linux-uclibceabihf (hardfloat)` it looks like many of the edge cases of using the uclibc c-library are getting worked out nicely. I've been able to compile some complex projects. Some patching still needed in some crates, but getting there for sure. I think `armv7-unknown-linux-uclibceabi` is ready to be a tier 3 target.
I use a cross-toolchain from my project to bootstrap rust.
https://github.com/lancethepants/tomatoware
The goal of this project is to create a native development environment with support for various languages.
mips64-openwrt-linux-musl: Add Tier 3 target
Tier 3 tuple for Mips64 OpenWrt toolchain.
This add first-time support for OpenWrt. Future Tier3 targets will be added as I test them.
Signed-off-by: Donald Hoskins <grommish@gmail.com>
This doesn't handle `char` because it's a bit awkward to distinguish it
from u32 at this point in codegen.
Note that for some types (like `&Struct` and `&mut Struct`),
we already apply `dereferenceable`, which implies `noundef`,
so the IR does not change.
Enable combining `+crt-static` and `relocation-model=pic` on `x86_64-unknown-linux-gnu`
Modern `gcc` versions support `-static-pie`, and `rustc` will already fall-back to `-static` if the local `gcc` is too old (and hence this change is optimistic rather than absolute). This brings the `-musl` and `-gnu` targets to feature compatibility (albeit with different default settings).
Of note a `-static` or `-static-pie` binary based on glibc that uses NSS-backed functions (`gethostbyname` or `getpwuid` etc.) need to have access to the `libnss_X.so.2` libraries and any of their dynamic dependencies.
I wasn't sure about the `# only`/`# ignore` changes (I've not got a `gnux32` toolchain to test with hence not also enabling `-static-pie` there).
- Fix style errors.
- L4-bender does not yet support dynamic linking.
- Stack unwinding is not yet supported for x86_64-unknown-l4re-uclibc.
For now, just abort on panics.
- Use GNU-style linker options where possible. As suggested by review:
- Use standard GNU-style ld syntax for relro flags.
- Use standard GNU-style optimization flags and logic.
- Use standard GNU-style ld syntax for --subsystem.
- Don't read environment variables in L4Bender linker. Thanks to
CARGO_ENCODED_RUSTFLAGS introduced in #9601, l4-bender's arguments can
now be passed from the L4Re build system without resorting to custom
parsing of environment variables.
In #79570, `-Z split-dwarf-kind={none,single,split}` was replaced by `-C
split-debuginfo={off,packed,unpacked}`. `-C split-debuginfo`'s packed
and unpacked aren't exact parallels to single and split, respectively.
On Unix, `-C split-debuginfo=packed` will put debuginfo into object
files and package debuginfo into a DWARF package file (`.dwp`) and
`-C split-debuginfo=unpacked` will put debuginfo into dwarf object files
and won't package it.
In the initial implementation of Split DWARF, split mode wrote sections
which did not require relocation into a DWARF object (`.dwo`) file which
was ignored by the linker and then packaged those DWARF objects into
DWARF packages (`.dwp`). In single mode, sections which did not require
relocation were written into object files but ignored by the linker and
were not packaged. However, both split and single modes could be
packaged or not, the primary difference in behaviour was where the
debuginfo sections that did not require link-time relocation were
written (in a DWARF object or the object file).
This commit re-introduces a `-Z split-dwarf-kind` flag, which can be
used to pick between split and single modes when `-C split-debuginfo` is
used to enable Split DWARF (either packed or unpacked).
Signed-off-by: David Wood <david.wood@huawei.com>
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
This reverts commit b376f5621b, which is
the main part of #90499, because it turns out that this causes a good
amount of breakage in crates relying on the old behavior.
Fixes#91372.
Support AVR for inline asm!
A first pass at support for the AVR platform in inline `asm!`. Passes the initial compiler tests, have not yet done more complete verification.
In particular, the register classes could use a lot more fleshing out, this draft PR so far only includes the most basic.
cc `@Amanieu` `@dylanmckay`
Add support for riscv64gc-unknown-freebsd
For https://doc.rust-lang.org/nightly/rustc/target-tier-policy.html#tier-3-target-policy:
* A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
For all Rust targets on FreeBSD, it's [rust@FreeBSD.org](mailto:rust@FreeBSD.org).
* Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Done.
* Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
Done
* Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Done.
* The target must not introduce license incompatibilities.
Done.
* Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Fine with me.
* The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Done.
* If the target supports building host tools (such as rustc or cargo), those host tools must not depend on proprietary (non-FOSS) libraries, other than ordinary runtime libraries supplied by the platform and commonly used by other binaries built for the target. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
Done.
* Targets should not require proprietary (non-FOSS) components to link a functional binary or library.
Done.
* "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Fine with me.
* Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
Ok.
* This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Ok.
* Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
std is implemented.
* The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running tests (even if they do not pass), the documentation must explain how to run tests for the target, using emulation if possible or dedicated hardware if necessary.
Building is possible the same way as other Rust on FreeBSD targets.
* Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Ok.
* Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Ok.
* Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
Ok.
* In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
Ok.
compiler/rustc_target: make m68k-unknown-linux-gnu use the gnu base
This makes the m68k arch match the other GNU/Linux based targets by setting the environment to gnu.
Link with default MACOSX_DEPLOYMENT_TARGET if not otherwise specified.
This PR sets the MACOSX_DEPLOYMENT_TARGET environment variable during the linking stage to our default, if it is not specified. This way it matches the deployment target we pass to llvm. If not set the the linker uses Xcode or Xcode commandline tools default which varies by version.
Fixes#90342, #91082.
Drive-by fixes to make Rust behave more like clang:
* Default to 11.0 deployment target for ARM64 which is the earliest version that had support for it.
* Set the llvm target to `arm64-apple-macosx<deployment target>` instead of `aarch64-apple-macosx<deployment target>`.
Restrict aarch64 outline atomics to glibc for now.
The introduced dependency on `getauxval` causes linking problems with musl, making compiling any binaries for `aarch64-unknown-linux-musl` impossible without workarounds such as using lld or adding liblibc.rlib again to the linker invocation, see #89626.
This is a workaround until libc>0.2.108 is merged.
LLVM has built-in heuristics for adding stack canaries to functions. These
heuristics can be selected with LLVM function attributes. This patch adds a
rustc option `-Z stack-protector={none,basic,strong,all}` which controls the use
of these attributes. This gives rustc the same stack smash protection support as
clang offers through options `-fno-stack-protector`, `-fstack-protector`,
`-fstack-protector-strong`, and `-fstack-protector-all`. The protection this can
offer is demonstrated in test/ui/abi/stack-protector.rs. This fills a gap in the
current list of rustc exploit
mitigations (https://doc.rust-lang.org/rustc/exploit-mitigations.html),
originally discussed in #15179.
Stack smash protection adds runtime overhead and is therefore still off by
default, but now users have the option to trade performance for security as they
see fit. An example use case is adding Rust code in an existing C/C++ code base
compiled with stack smash protection. Without the ability to add stack smash
protection to the Rust code, the code base artifacts could be exploitable in
ways not possible if the code base remained pure C/C++.
Stack smash protection support is present in LLVM for almost all the current
tier 1/tier 2 targets: see
test/assembly/stack-protector/stack-protector-target-support.rs. The one
exception is nvptx64-nvidia-cuda. This patch follows clang's example, and adds a
warning message printed if stack smash protection is used with this target (see
test/ui/stack-protector/warn-stack-protector-unsupported.rs). Support for tier 3
targets has not been checked.
Since the heuristics are applied at the LLVM level, the heuristics are expected
to add stack smash protection to a fraction of functions comparable to C/C++.
Some experiments demonstrating how Rust code is affected by the different
heuristics can be found in
test/assembly/stack-protector/stack-protector-heuristics-effect.rs. There is
potential for better heuristics using Rust-specific safety information. For
example it might be reasonable to skip stack smash protection in functions which
transitively only use safe Rust code, or which uses only a subset of functions
the user declares safe (such as anything under `std.*`). Such alternative
heuristics could be added at a later point.
LLVM also offers a "safestack" sanitizer as an alternative way to guard against
stack smashing (see #26612). This could possibly also be included as a
stack-protection heuristic. An alternative is to add it as a sanitizer (#39699).
This is what clang does: safestack is exposed with option
`-fsanitize=safe-stack`.
The options are only supported by the LLVM backend, but as with other codegen
options it is visible in the main codegen option help menu. The heuristic names
"basic", "strong", and "all" are hopefully sufficiently generic to be usable in
other backends as well.
Reviewed-by: Nikita Popov <nikic@php.net>
Extra commits during review:
- [address-review] make the stack-protector option unstable
- [address-review] reduce detail level of stack-protector option help text
- [address-review] correct grammar in comment
- [address-review] use compiler flag to avoid merging functions in test
- [address-review] specify min LLVM version in fortanix stack-protector test
Only for Fortanix test, since this target specifically requests the
`--x86-experimental-lvi-inline-asm-hardening` flag.
- [address-review] specify required LLVM components in stack-protector tests
- move stack protector option enum closer to other similar option enums
- rustc_interface/tests: sort debug option list in tracking hash test
- add an explicit `none` stack-protector option
Revert "set LLVM requirements for all stack protector support test revisions"
This reverts commit a49b74f92a4e7d701d6f6cf63d207a8aff2e0f68.
std: Get the standard library compiling for wasm64
This commit goes through and updates various `#[cfg]` as appropriate to
get the wasm64-unknown-unknown target behaving similarly to the
wasm32-unknown-unknown target. Most of this is just updating various
conditions for `target_arch = "wasm32"` to also account for `target_arch
= "wasm64"` where appropriate. This commit also lists `wasm64` as an
allow-listed architecture to not have the `restricted_std` feature
enabled, enabling experimentation with `-Z build-std` externally.
The main goal of this commit is to enable playing around with
`wasm64-unknown-unknown` externally via `-Z build-std` in a way that's
similar to the `wasm32-unknown-unknown` target. These targets are
effectively the same and only differ in their pointer size, but wasm64
is much newer and has much less ecosystem/library support so it'll still
take time to get wasm64 fully-fledged.
* Add wasm64 variants for inline assembly along the same lines as wasm32
* Update a few directives in libtest to check for `target_family`
instead of `target_arch`
* Update some rustc codegen and typechecks specialized for wasm32 to
also work for wasm64.
This commit goes through and updates various `#[cfg]` as appropriate to
get the wasm64-unknown-unknown target behaving similarly to the
wasm32-unknown-unknown target. Most of this is just updating various
conditions for `target_arch = "wasm32"` to also account for `target_arch
= "wasm64"` where appropriate. This commit also lists `wasm64` as an
allow-listed architecture to not have the `restricted_std` feature
enabled, enabling experimentation with `-Z build-std` externally.
The main goal of this commit is to enable playing around with
`wasm64-unknown-unknown` externally via `-Z build-std` in a way that's
similar to the `wasm32-unknown-unknown` target. These targets are
effectively the same and only differ in their pointer size, but wasm64
is much newer and has much less ecosystem/library support so it'll still
take time to get wasm64 fully-fledged.
After updating the minimum required LLVM version to 12 we can use
apple-a14 as that is closer in features to the Apple M1 than the A12.
Once the minimum required LLVM version is updated to 13 we can use
apple-m1.
Add new tier 3 target: `x86_64-unknown-none`
Adds support for compiling OS kernels or other bare-metal applications for the x86-64 architecture.
Below are details on how this target meets the requirements for tier 3:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I would be willing to be a target maintainer, though I would appreciate if others volunteered to help with that as well.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Uses the same naming as the LLVM target, and the same convention as many other bare-metal targets.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
I don't believe there is any ambiguity here.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
I don't see any legal issues here.
> The target must not introduce license incompatibilities.
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
>If the target supports building host tools (such as rustc or cargo), those host tools must not depend on proprietary (non-FOSS) libraries, other than ordinary runtime libraries supplied by the platform and commonly used by other binaries built for the target. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> Targets should not require proprietary (non-FOSS) components to link a functional binary or library.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
I see no issues with any of the above.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Only relevant to those making approval decisions.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
`core` and `alloc` can be used. `std` cannot be used as this is a bare-metal target.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running tests (even if they do not pass), the documentation must explain how to run tests for the target, using emulation if possible or dedicated hardware if necessary.
Use `--target=x86_64-unknown-none-elf` option to cross compile, just like any target. The target does not support running tests.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
I don't foresee this being a problem.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No other targets should be affected by the pull request.
For our kernel targets, we should not set OS, as the kernel runs bare
metal without a circular dependency on std.
This also prepares us for unifying with
https://github.com/rust-lang/rust/pull/89062. This patch requires
libhermit-rs to change a `cfg`s from `target_os = "hermit"` to `target_os
= "none"`.
I tested this patch locally.
Add LLVM CFI support to the Rust compiler
This PR adds LLVM Control Flow Integrity (CFI) support to the Rust compiler. It initially provides forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by defining and using compatible type identifiers (see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you, `@eddyb` and `@pcc,` for all the help!
This commit adds LLVM Control Flow Integrity (CFI) support to the Rust
compiler. It initially provides forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by defining and using compatible type identifiers
(see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Fix wrong niche calculation when 2+ niches are placed at the start
When the niche is at the start, existing code incorrectly uses 1 instead of count for subtraction.
Fix#90038
`@rustbot` label: T-compiler
HermitCore's kernel itself doesn't support TLS.
Consequently, the entries in x86_64-unknown-none-hermitkernel should be removed.
This commit should help to finalize #89062.
Specify the `cpu` and the `max_atomic_width` (64).
Set `stack_probes` similarly to other targets to work around known
issues, and copy the corresponding comment from those targets.
Build position-independent code that doesn't require relocations.
(Work on this target sponsored by Profian.)
Most Rust freestanding/bare-metal targets use just `-unknown-none` here,
including aarch64-unknown-none, mipsel-unknown-none, and the BPF
targets. The *only* target using `-unknown-none-elf` is RISC-V.
The underlying toolchain doesn't care; LLVM accepts both `x86_64-unknown-none`
and `x86_64-unknown-none-elf`.
In addition, there's a long history of embedded x86 targets with varying
definitions for the `elf` suffix; on some of those embedded targets,
`elf` implied the inclusion of a C library based on newlib or similar.
Using `x86_64-unknown-none` avoids any potential ambiguity there.
(Work on this target sponsored by Profian.)
SOLID[1] is an embedded development platform provided by Kyoto
Microcomputer Co., Ltd. This commit introduces a basic Tier 3 support
for SOLID.
# New Targets
The following targets are added:
- `aarch64-kmc-solid_asp3`
- `armv7a-kmc-solid_asp3-eabi`
- `armv7a-kmc-solid_asp3-eabihf`
SOLID's target software system can be divided into two parts: an
RTOS kernel, which is responsible for threading and synchronization,
and Core Services, which provides filesystems, networking, and other
things. The RTOS kernel is a μITRON4.0[2][3]-derived kernel based on
the open-source TOPPERS RTOS kernels[4]. For uniprocessor systems
(more precisely, systems where only one processor core is allocated for
SOLID), this will be the TOPPERS/ASP3 kernel. As μITRON is
traditionally only specified at the source-code level, the ABI is
unique to each implementation, which is why `asp3` is included in the
target names.
More targets could be added later, as we support other base kernels
(there are at least three at the point of writing) and are interested
in supporting other processor architectures in the future.
# C Compiler
Although SOLID provides its own supported C/C++ build toolchain, GNU Arm
Embedded Toolchain seems to work for the purpose of building Rust.
# Unresolved Questions
A μITRON4 kernel can support `Thread::unpark` natively, but it's not
used by this commit's implementation because the underlying kernel
feature is also used to implement `Condvar`, and it's unclear whether
`std` should guarantee that parking tokens are not clobbered by other
synchronization primitives.
# Unsupported or Unimplemented Features
Most features are implemented. The following features are not
implemented due to the lack of native support:
- `fs::File::{file_attr, truncate, duplicate, set_permissions}`
- `fs::{symlink, link, canonicalize}`
- Process creation
- Command-line arguments
Backtrace generation is not really a good fit for embedded targets, so
it's intentionally left unimplemented. Unwinding is functional, however.
## Dynamic Linking
Dynamic linking is not supported. The target platform supports dynamic
linking, but enabling this in Rust causes several problems.
- The linker invocation used to build the shared object of `std` is
too long for the platform-provided linker to handle.
- A linker script with specific requirements is required for the
compiled shared object to be actually loadable.
As such, we decided to disable dynamic linking for now. Regardless, the
users can try to create shared objects by manually invoking the linker.
## Executable
Building an executable is not supported as the notion of "executable
files" isn't well-defined for these targets.
[1] https://solid.kmckk.com/SOLID/
[2] http://ertl.jp/ITRON/SPEC/mitron4-e.html
[3] https://en.wikipedia.org/wiki/ITRON_project
[4] https://toppers.jp/
Add initial support for m68k
This patch series adds initial support for m68k making use of the new M68k
backend introduced with LLVM-13. Additional changes will be needed to be
able to actually use the backend for this target.
Enum should prefer discriminant zero for niche
Given an enum with unassigned zero-discriminant, rust should prefer it for niche selection.
Zero as discriminant for `Option<Enum>` makes it possible for LLVM to optimize resulting asm.
- Eliminate branch when expected value coincides.
- Use smaller instruction `test eax, eax` instead of `cmp eax, ?`
- Possible interaction with zeroed memory?
Example:
```rust
pub enum Size {
One = 1,
Two = 2,
Three = 3,
}
pub fn handle(x: Option<Size>) -> u8 {
match x {
None => {0}
Some(size) => {size as u8}
}
}
```
In this case discriminant zero is available as a niche.
Above example on nightly:
```asm
mov eax, edi
cmp al, 4
jne .LBB0_2
xor eax, eax
.LBB0_2:
ret
```
PR:
```asm
mov eax, edi
ret
```
I created this PR because I had a performance regression when I tried to use an enum to represent legal grapheme byte-length for utf8.
Using an enum instead of `NonZeroU8` [here](d683304f5d/src/internal/decoder_incomplete.rs (L90))
resulted in a performance regression of about 5%.
I consider this to be a somewhat realistic benchmark.
Thanks to `@ogoffart` for pointing me in the right direction!
Edit: Updated description
ARMv6K Nintendo 3DS Tier 3 target added
Addition of the target specifications to build .elf files for Nintendo 3DS (ARMv6K, Horizon). Requires devkitARM 3DS toolkit for system libraries and arm-none-eabi-gcc linker.
Move *_max methods back to util
change to inline instead of inline(always)
Remove valid_range_exclusive from scalar
Use WrappingRange instead
implement always_valid_for in a safer way
Fix accidental edit
Provide `layout_of` automatically (given tcx + param_env + error handling).
After #88337, there's no longer any uses of `LayoutOf` within `rustc_target` itself, so I realized I could move the trait to `rustc_middle::ty::layout` and redesign it a bit.
This is similar to #88338 (and supersedes it), but at no ergonomic loss, since there's no funky `C: LayoutOf<Ty = Ty>` -> `Ty: TyAbiInterface<C>` generic `impl` chain, and each `LayoutOf` still corresponds to one `impl` (of `LayoutOfHelpers`) for the specific context.
After this PR, this is what's needed to get `trait LayoutOf` (with the `layout_of` method) implemented on some context type:
* `TyCtxt`, via `HasTyCtxt`
* `ParamEnv`, via `HasParamEnv`
* a way to transform `LayoutError`s into the desired error type
* an error type of `!` can be paired with having `cx.layout_of(...)` return `TyAndLayout` *without* `Result<...>` around it, such as used by codegen
* this is done through a new `LayoutOfHelpers` trait (and so is specifying the type of `cx.layout_of(...)`)
When going through this path (and not bypassing it with a manual `impl` of `LayoutOf`), the end result is that only the error case can be customized, the query itself and the success paths are guaranteed to be uniform.
(**EDIT**: just noticed that because of the supertrait relationship, you cannot actually implement `LayoutOf` yourself, the blanket `impl` fully covers all possible context types that could ever implement it)
Part of the motivation for this shape of API is that I've been working on querifying `FnAbi::of_*`, and what I want/need to introduce for that looks a lot like the setup in this PR - in particular, it's harder to express the `FnAbi` methods in `rustc_target`, since they're much more tied to `rustc` concepts.
r? `@nagisa` cc `@oli-obk` `@bjorn3`
rustc_target: `TyAndLayout::field` should never error.
This refactor (making `TyAndLayout::field` return `TyAndLayout` without any `Result` around it) is based on a simple observation, regarding `TyAndLayout::field`:
If `cx.layout_of(ty)` succeeds (for some `cx` and `ty`), then `.field(cx, i)` on the resulting `TyAndLayout` should *always* succeed in computing `cx.layout_of(field_ty)` (where `field_ty` is the type of the `i`th field of `ty`).
The reason for this is that no matter which field is chosen, `cx.layout_of(field_ty)` *will have already been computed*, as part of computing `cx.layout_of(ty)`, as we cannot determine the layout of *any* type without considering the layouts of *all* of its fields.
And so it should be fine to turn any errors into ICEs, since they likely indicate a `cx` mismatch, or some other edge case that is due to a compiler bug (as opposed to ever being an user-facing error).
<hr/>
Each commit should probably be reviewed separately, though note that there's some `where` clauses (in `rustc_target::abi::call::*`) that change in most commits.
cc `@nagisa` `@oli-obk`
Make `-Z gcc-ld=lld` work for Apple targets
`-Z gcc-ld=lld` was introduced in #85961. It does not work on Macos because lld needs be either named `ld64` or passed `-flavor darwin` as the first two arguments in order to select the Mach-O flavor. Rust invokes cc (=clang) on Macos for linking which calls `ld` as linker binary and not `ld64`, so just creating an `ld64` binary and modifying the search path with `-B` does not work.
In order to solve this patch does:
* Set the `lld_flavor` for all Apple-derived targets to `LldFlavor::Ld64`. As far as I can see this actually works towards fixing `-Xlinker=rust-lld` as all those targets use the Mach-O object format.
* Copy/hardlink rust-lld to the gcc-ld subdirectory as ld64 next to ld.
* If `-Z gcc-ld=lld` is used and the target lld flavor is Ld64 add `-fuse-ld=/path/to/ld64` to the linker invocation.
Fixes#86945.
S390x inline asm
This adds register definitions and constraint codes for the s390x general and floating point registers necessary for fixing #85931; as well as a few tests.
Further testing is needed, but I am a little unsure of what specific tests should be added to `src/test/assembly/asm/s390x.rs` to address this.
Morph `layout_raw` query into `layout_of`.
Before this PR, `LayoutCx::layout_of` wrapped the `layout_raw` query, to:
* normalize the type, before attempting to compute the layout
* pass the layout to `record_layout_for_printing`, for `-Zprint-type-sizes`
Moving those two responsibilities into the query may reduce overhead (due to cached calls skipping those steps), but I want to do a perf run to know.
One of the changes I had to make was changing the return type of the query, to be able to both get out the type produced by normalizing inside the query *and* to match the signature of the old `TyCtxt::layout_of`. This change may be worse, perf-wise, so that's another reason I want to check.
r? `@nagisa` cc `@oli-obk`
Use custom wrap-around type instead of RangeInclusive
Two reasons:
1. More memory is allocated than necessary for `valid_range` in `Scalar`. The range is not used as an iterator and `exhausted` is never used.
2. `contains`, `count` etc. methods in `RangeInclusive` are doing very unhelpful(and dangerous!) things when used as a wrap-around range. - In general this PR wants to limit potentially confusing methods, that have a low probability of working.
Doing a local perf run, every metric shows improvement except for instructions.
Max-rss seem to have a very consistent improvement.
Sorry - newbie here, probably doing something wrong.
Allow specifying an deployment target version for all iOS llvm targets
Closes: https://github.com/rust-lang/rust/issues/79408
This pull requests adds the same procedure to define the iOS-version for the LLVM-target as was used for the simulator target and the desktop target.
This then closes the original problem mentioned in the above issue. The problem with incompatible bitcode remains, but is probably not easy fixable.
I realised that something is still not right. Try to fix that.
r? `@petrochenkov`
Generate an iOS LLVM target with a specific version
This commit adds the `LC_VERSION_MIN_IPHONEOS` load command to the Mach-O header generated for `aarch64-apple-ios` binaries. The operating system will look for this load command to determine the minimum supported operating system version and will not allow the binary to run if it's absent. This logic already exists for the simulator toolchain.
I've been using `otool` from a [cctools](https://github.com/tpoechtrager/cctools-port) toolchain to parse the header and validate that this change adds the required load command.
This change appears to be enough to build Rust binaries that can run on a jailbroken iPhone.
Upgrade to LLVM 13
Work in progress update to LLVM 13. Main changes:
* InlineAsm diagnostics reported using SrcMgr diagnostic kind are now handled. Previously these used a separate diag handler.
* Codegen tests are updated for additional attributes.
* Some data layouts have changed.
* Switch `#[used]` attribute from `llvm.used` to `llvm.compiler.used` to avoid SHF_GNU_RETAIN flag introduced in https://reviews.llvm.org/D97448, which appears to trigger a bug in older versions of gold.
* Set `LLVM_INCLUDE_TESTS=OFF` to avoid Python 3.6 requirement.
Upstream issues:
* ~~https://bugs.llvm.org/show_bug.cgi?id=51210 (InlineAsm diagnostic reporting for module asm)~~ Fixed by 1558bb80c0.
* ~~https://bugs.llvm.org/show_bug.cgi?id=51476 (Miscompile on AArch64 due to incorrect comparison elimination)~~ Fixed by 81b106584f.
* https://bugs.llvm.org/show_bug.cgi?id=51207 (Can't set custom section flags anymore). Problematic change reverted in our fork, https://reviews.llvm.org/D107216 posted for upstream revert.
* https://bugs.llvm.org/show_bug.cgi?id=51211 (Regression in codegen for #83623). This is an optimization regression that we may likely have to eat for this release. The fix for #83623 was based on an incorrect premise, and this needs to be properly addressed in the MergeICmps pass.
The [compile-time impact](https://perf.rust-lang.org/compare.html?start=ef9549b6c0efb7525c9b012148689c8d070f9bc0&end=0983094463497eec22d550dad25576a894687002) is mixed, but quite positive as LLVM upgrades go.
The LLVM 13 final release is scheduled for Sep 21st. The current nightly is scheduled for stable release on Oct 21st.
r? `@ghost`
Without the specific version, the mach-o header will be missing the
minimum supported operating system version. This is mandatory for
running Rust binaries on iOS devices.
Add support for clobber_abi to asm!
This PR adds the `clobber_abi` feature that was proposed in #81092.
Fixes#81092
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
Add c_enum_min_bits target spec field, use for arm-none and thumb-none targets
Fixes https://github.com/rust-lang/rust/issues/87917
<s>Haven't tested this yet, still playing around.</s>
This seems to fix the issue.
* This commit adds the aarch64-unknown-uefi target and also adds it into
the supported targets list under the tier-3 target table.
* Uses the small code model by default
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Use small code model for UEFI targets
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Do not allow JSON targets to set is-builtin: true
Note that this will affect (and make builds fail for) all of the projects out there that have target files invalid in this way. Crater, however, does not really cover these kinds of the codebases, so it is quite difficult to measure the impact. That said, the target files invalid in this way can start causing build failures each time LLVM is upgraded, anyway, so it is probably a good opportunity to disallow this property, entirely.
Another approach considered was to simply not parse this field anymore, which would avoid making the builds explicitly fail, but it wasn't clear to me if `is-builtin` was always set unintentionally… In case this was the case, I'd expect people to file a feature request stating specifically for what purpose they were using `is-builtin`.
Fixes#86017
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
* Use the LLVM default code model for the architecture for the
x86_64-unknown-uefi targets. For reference small is the default
code model on x86 in LLVM: <7de2173c2a/llvm/lib/Target/X86/X86TargetMachine.cpp (L204)>
* Remove the comments too as they are not UEFI-specific and applies
to pretty much any target. I added them before as I was explicitily
setting the code model to small.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
All eabi targets have target_abi = "eabi".
All eabihf targets have target_abi = "eabihf".
armv6_unknown_freebsd and armv7_unknown_freebsd have target_abi = "eabihf".
All abi64 targets have target_abi = "abi64".
All ilp32 targets have target_abi = "ilp32".
All softfloat targets have target_abi = "softfloat".
All *-uwp-windows-* targets have target_abi = "uwp".
All spe targets have target_abi = "spe".
All macabi targets have target_abi = "macabi".
aarch64-apple-ios-sim has target_abi = "sim".
x86_64-fortanix-unknown-sgx has target_abi = "fortanix".
x86_64-unknown-linux-gnux32 has target_abi = "x32".
Add FIXME entries for targets for which existing values need to change
once cfg_target_abi becomes stable. (All of them are tier 3 targets.)
Add a test for target_abi in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
Fixes#57182
Sponsored by: standard.ai
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Emit warnings for unused fields in custom targets.
Add a warning which lists any fields in a custom target `json` file that aren't used. Currently unrecognized fields are ignored so, for example, a typo in the `json` will silently produce a target which isn't the one intended.
