Add MVP LLVM based mingw-w64 targets
Fixes https://github.com/rust-lang/rust/issues/72241
Those are `rustc` side changes to create working x86_64 and AArch64 Rustc hosts and targets.
Apart from this PR changes to various crates are required which I'll do once this is accepted.
I'm expecting more changes on `rustc` side later on as I cannot even run full testsuite at this moment because passing JSON spec breaks paths in various tests.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I pledge to do my best maintaining it, MSYS2 is one of interested consumers so it should have enough testing (after the releases).
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
This triple name was discussed at [`t-compiler/LLVM+mingw-w64 Windows targets`](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/LLVM.2Bmingw-w64.20Windows.20targets)
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
I think the explanation in platform support doc is enough to make this aspect clear.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
It's using open source tools only.
> The target must not introduce license incompatibilities.
It's even more liberal than already existing `*-pc-windows-gnu`.
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Understood.
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
There are no new dependencies/features required.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
As previously said it's using open source tools only.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
There are no such terms present/
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, running tests doesn't work right now (without hacks) because Rust's build system doesn't seem to support testing targets built from `.json`.
Docs will be updated once this lands in beta allowing master branch to build and run tests without `.json` files.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
Use default alloc_error_handler for hermit
Hermit now properly separates kernel from userspace.
Applications for hermit can now use Rust's default `alloc_error_handler` instead of calling the kernel's `__rg_oom`.
CC: ``@stlankes``
This reduces synchronization between threads when
debugging the atomic types.
Reducing the synchronization means that executions with and
without the debug calls will be more consistent,
making it easier to debug.
ExitCode::exit_process() method
cc `@yaahc` / #93840
(eeek, hit ctrl-enter before I meant to and right after realizing the branch name was wrong. oh, well)
I feel like it makes sense to have the `exit(ExitCode)` function as a method or at least associated function on ExitCode, but maybe that would hurt discoverability? Probably not as much if it's at the top of the `process::exit()` documentation or something, but idk. Also very unsure about the name, I'd like something that communicates that you are exiting with *this* ExitCode, but with a method name being postfix it doesn't seem to flow. `code.exit_process_with()` ? `.exit_process_with_self()` ? Blech. Maybe it doesn't matter, since ideally just `code.exit()` or something would be clear simply by the name and single parameter but 🤷
Also I'd like to touch up the `ExitCode` docs (which I did a bit here), but that would probably be good in a separate PR, right? Since I think the beta deadline is coming up.
Fixes https://github.com/rust-lang/rust/issues/93959
This change was accepted in https://rust-lang.github.io/rfcs/2580-ptr-meta.html
Note that this changes the signature of **stable** functions.
The change should be backward-compatible, but it is **insta-stable**
since it cannot (easily, at all?) be made available only
through a `#![feature(…)]` opt-in.
The RFC also proposed the same change for `NonNull::dangling`,
which makes sense it terms of its signature but not in terms of its implementation.
`dangling` uses `align_of()` as an address. But what `align_of()` should be for
extern types or whether it should be allowed at all remains an open question.
This commit depends on https://github.com/rust-lang/rust/pull/93977, which is not yet
part of the bootstrap compiler. So `#[cfg]` is used to only apply the change in
stage 1+. As far a I know bounds cannot be made conditional with `#[cfg]`, so the
entire functions are duplicated. This is unfortunate but temporary.
Since this duplication makes it less obvious in the diff,
the new definitions differ in:
* More permissive bounds (`Thin` instead of implied `Sized`)
* Different implementation
* Having `rustc_allow_const_fn_unstable(ptr_metadata)`
Expand core::hint::unreachable_unchecked() docs
Rework the docs for `unreachable_unchecked`, encouraging deliberate use, and providing a better example for action at a distance.
Fixes#95865
Clarify what values `BorrowedHandle`, `OwnedHandle` etc. can hold.
Reword the documentation to clarify that when `BorrowedHandle`, `OwnedHandle`, or `HandleOrNull` hold the value `-1`, it always means the current process handle, and not `INVALID_HANDLE_VALUE`.
`-1` should only mean `INVALID_HANDLE_VALUE` after a call to a function documented to return that to report errors, which should lead I/O functions to produce errors rather than succeeding and producing `OwnedHandle` or `BorrowedHandle` values. So if a consumer of an `OwnedHandle` or `BorrowedHandle` ever sees them holding a `-1`, it should always mean the current process handle.
openbsd: convert futex timeout managment to Timespec usage
unbreak openbsd build after #96657
r? cuviper
please note I made `Timespec::zero()` public to be able to use it. OpenBSD is using relative timeout for `futex(2)` and I don't find simple way to use `Timespec` this way.
Apparently LLVM is unable to understand that if count_ones() == 1 then self != 0.
Adding `assume(align != 0)` helps generating better asm:
https://rust.godbolt.org/z/ja18YKq91
Since they work on byte pointers (by `.cast::<u8>()`ing them), there is
no need to know the size of `T` and so there is no need for `T: Sized`.
The `is_aligned_to` is similar, though it doesn't need the _alignment_
of `T`.
Add `sub_ptr` on pointers (the `usize` version of `offset_from`)
We have `add`/`sub` which are the `usize` versions of `offset`, this adds the `usize` equivalent of `offset_from`. Like how `.add(d)` replaced a whole bunch of `.offset(d as isize)`, you can see from the changes here that it's fairly common that code actually knows the order between the pointers and *wants* a `usize`, not an `isize`.
As a bonus, this can do `sub nuw`+`udiv exact`, rather than `sub`+`sdiv exact`, which can be optimized slightly better because it doesn't have to worry about negatives. That's why the slice iterators weren't using `offset_from`, though I haven't updated that code in this PR because slices are so perf-critical that I'll do it as its own change.
This is an intrinsic, like `offset_from`, so that it can eventually be allowed in CTFE. It also allows checking the extra safety condition -- see the test confirming that CTFE catches it if you pass the pointers in the wrong order.
Like we have `add`/`sub` which are the `usize` version of `offset`, this adds the `usize` equivalent of `offset_from`. Like how `.add(d)` replaced a whole bunch of `.offset(d as isize)`, you can see from the changes here that it's fairly common that code actually knows the order between the pointers and *wants* a `usize`, not an `isize`.
As a bonus, this can do `sub nuw`+`udiv exact`, rather than `sub`+`sdiv exact`, which can be optimized slightly better because it doesn't have to worry about negatives. That's why the slice iterators weren't using `offset_from`, though I haven't updated that code in this PR because slices are so perf-critical that I'll do it as its own change.
This is an intrinsic, like `offset_from`, so that it can eventually be allowed in CTFE. It also allows checking the extra safety condition -- see the test confirming that CTFE catches it if you pass the pointers in the wrong order.
Implement a lint to warn about unused macro rules
This implements a new lint to warn about unused macro rules (arms/matchers), similar to the `unused_macros` lint added by #41907 that warns about entire macros.
```rust
macro_rules! unused_empty {
(hello) => { println!("Hello, world!") };
() => { println!("empty") }; //~ ERROR: 1st rule of macro `unused_empty` is never used
}
fn main() {
unused_empty!(hello);
}
```
Builds upon #96149 and #96156.
Fixes#73576
PR #94586 added support for using
`rustc_nonnull_optimization_guaranteed` on values where the "null" value
is the all-ones bitpattern.
Now that #94586 has made it to the stage0 compiler, add
`rustc_nonnull_optimization_guaranteed` to `OwnedFd`, `BorrowedFd`,
`OwnedSocket`, and `BorrowedSocket`, since these types all exclude
all-ones bitpatterns.
This allows `Option<OwnedFd>`, `Option<BorrowedFd>`, `Option<OwnedSocket>`,
and `Option<BorrowedSocket>` to be used in FFI declarations, as described
in the [I/O safety RFC].
[I/O safety RFC]: https://github.com/rust-lang/rfcs/blob/master/text/3128-io-safety.md#ownedfd-and-borrowedfdfd-1
Clarify that when `BorrowedHandle`, `OwnedHandle`, or `HandleOrNull`
hold the value `-1`, it always means the current process handle, and not
`INVALID_HANDLE_VALUE`.
Make `BorrowedFd::borrow_raw` a const fn.
Making `BorrowedFd::borrow_raw` a const fn allows it to be used to
create a constant `BorrowedFd<'static>` holding constants such as
`AT_FDCWD`. This will allow [`rustix::fs::cwd`] to become a const fn.
For consistency, make similar changes to `BorrowedHandle::borrow_raw`
and `BorrowedSocket::borrow_raw`.
[`rustix::fs::cwd`]: https://docs.rs/rustix/latest/rustix/fs/fn.cwd.html
r? `@joshtriplett`
CC #27709 (tracking issue for the `ip` feature which contains more
functions)
The function `Ipv6Addr::to_ipv4` is bad because it also returns an IPv4
address for the IPv6 loopback address `::1`. Stabilize
`Ipv6Addr::to_ipv4_mapped` so we can recommend that function instead.
Issue #84096 changed the hashmap RNG to use BCryptGenRandom instead of
RtlGenRandom on Windows.
Mozilla Firefox started experiencing random failures in
env_logger::Builder::new() (Issue #94098) during initialization of their
unsandboxed main process with an "Access Denied" error message from
BCryptGenRandom(), which is used by the HashMap contained in
env_logger::Builder
The root cause appears to be a virus scanner or other software interfering
with BCrypt DLLs loading.
This change adds a fallback option if BCryptGenRandom is unusable for
whatever reason. It will fallback to RtlGenRandom in this case.
Fixes#94098
Expose process windows_process_extensions_main_thread_handle on Windows
~~I did not find any tests in 7d3e03666a/library/std/src/sys/windows/process/tests.rs that actually launch processes, so I haven't added tests for this.~~ I ran the following locally, to check that it works as expected:
```rs
#![feature(windows_process_extensions_main_thread_handle)]
fn main() {
use std::os::windows::process::{ChildExt, CommandExt};
const CREATE_SUSPENDED: u32 = 0x00000004;
let proc = std::process::Command::new("cmd")
.args(["/C", "echo hello"])
.creation_flags(CREATE_SUSPENDED)
.spawn()
.unwrap();
extern "system" {
fn ResumeThread(_: *mut std::ffi::c_void) -> u32;
}
unsafe {
ResumeThread(proc.main_thread_handle());
}
let output = proc.wait_with_output().unwrap();
let str_output = std::str::from_utf8(&output.stdout[..]).unwrap();
println!("{}", str_output);
}
```
Without the feature attribute it wouldn't compile, and commenting the `ResumeThread` line makes it hang forever, showing that it works.
Trakcing issue https://github.com/rust-lang/rust/issues/96723
Revert "Implement [OsStr]::join", which was merged without FCP.
This reverts commit 4fcbc53820, see https://github.com/rust-lang/rust/pull/96744. (I'm terribly sorry, and truly don't remember r+ing it, or even having seen it before yesterday, which is... genuinely very worrisome for me).
r? `@m-ou-se`
Warn on unused `#[doc(hidden)]` attributes on trait impl items
[Zulip conversation](https://rust-lang.zulipchat.com/#narrow/stream/266220-rustdoc/topic/.E2.9C.94.20Validy.20checks.20for.20.60.23.5Bdoc.28hidden.29.5D.60).
Whether an associated item in a trait impl is shown or hidden in the documentation entirely depends on the corresponding item in the trait declaration. Rustdoc completely ignores `#[doc(hidden)]` attributes on impl items. No error or warning is emitted:
```rust
pub trait Tr { fn f(); }
pub struct Ty;
impl Tr for Ty { #[doc(hidden)] fn f() {} }
// ^^^^^^^^^^^^^^ ignored by rustdoc and currently
// no error or warning issued
```
This may lead users to the wrong belief that the attribute has an effect. In fact, several such cases are found in the standard library (I've removed all of them in this PR).
There does not seem to exist any incentive to allow this in the future either: Impl'ing a trait for a type means the type *fully* conforms to its API. Users can add `#[doc(hidden)]` to the whole impl if they want to hide the implementation or add the attribute to the corresponding associated item in the trait declaration to hide the specific item. Hiding an implementation of an associated item does not make much sense: The associated item can still be found on the trait page.
This PR emits the warn-by-default lint `unused_attribute` for this case with a future-incompat warning.
`@rustbot` label T-compiler T-rustdoc A-lint
Improve floating point documentation
This is my attempt to improve/solve https://github.com/rust-lang/rust/issues/95468 and https://github.com/rust-lang/rust/issues/73328 .
Added/refined explanations:
- Refine the "NaN as a special value" top level explanation of f32
- Refine `const NAN` docstring: add an explanation about there being multitude of NaN bitpatterns and disclaimer about the portability/stability guarantees.
- Refine `fn is_sign_positive` and `fn is_sign_negative` docstrings: add disclaimer about the sign bit of NaNs.
- Refine `fn min` and `fn max` docstrings: explain the semantics and their relationship to the standard and libm better.
- Refine `fn trunc` docstrings: explain the semantics slightly more.
- Refine `fn powi` docstrings: add disclaimer that the rounding behaviour might be different from `powf`.
- Refine `fn copysign` docstrings: add disclaimer about payloads of NaNs.
- Refine `minimum` and `maximum`: add disclaimer that "propagating NaN" doesn't mean that propagating the NaN bit patterns is guaranteed.
- Refine `max` and `min` docstrings: add "ignoring NaN" to bring the one-row explanation to parity with `minimum` and `maximum`.
Cosmetic changes:
- Reword `NaN` and `NAN` as plain "NaN", unless they refer to the specific `const NAN`.
- Reword "a number" to `self` in function docstrings to clarify.
- Remove "Returns NAN if the number is NAN" from `abs`, as this is told to be the default behavior in the top explanation.
Remove `#[rustc_deprecated]`
This removes `#[rustc_deprecated]` and introduces diagnostics to help users to the right direction (that being `#[deprecated]`). All uses of `#[rustc_deprecated]` have been converted. CI is expected to fail initially; this requires #95958, which includes converting `stdarch`.
I plan on following up in a short while (maybe a bootstrap cycle?) removing the diagnostics, as they're only intended to be short-term.
Further elaborate the lack of guarantees from `Hasher`
I realized that I got too excited in #94598 by adding new methods, and forgot to do the documentation to really answer the core question in #94026.
This PR just has that doc update.
r? `@Amanieu`
Add more diagnostic items
This just adds a handful diagnostic items I noticed were missing.
Would it be worth doing this for all of the remaining types? I'm willing to do it if it'd be helpful.
Create clippy lint against unexpectedly late drop for temporaries in match scrutinee expressions
A new clippy lint for issue 93883 (https://github.com/rust-lang/rust/issues/93883). Relies on a new trait in `marker` (called `SignificantDrop` to enable linting), which is why this PR is for the rust-lang repo and not the clippy repo.
changelog: new lint [`significant_drop_in_scrutinee`]
Remove hard links from `env::current_exe` security example
The security example shows that `env::current_exe` will return the path used when the program was started. This is not really surprising considering how hard links work: after `ln foo bar`, the two files are _equivalent_. It is _not_ the case that `bar` is a “link” to `foo`, nor is `foo` a link to `bar`. They are simply two names for the same underlying data.
The security vulnerability linked to seems to be different: there an attacker would start a SUID binary from a directory under the control of the attacker. The binary would respawn itself by executing the program found at `/proc/self/exe` (which the attacker can control). This is a real problem. In my opinion, the example given here doesn’t really show the same problem, it just shows a misunderstanding of what hard links are.
I looked through the history a bit and found that the example was introduced in https://github.com/rust-lang/rust/pull/33526. That PR actually has two commits, and the first (8478d48dad) explains the race condition at the root of the linked security vulnerability. The second commit proceeds to replace the explanation with the example we have today.
This commit reverts most of the second commit from https://github.com/rust-lang/rust/pull/33526.
Add aliases for std::fs::canonicalize
The aliases are `realpath` and `GetFinalPathNameByHandle` which are explicitly mentioned in `canonicalize`'s documentation.
Link to correct `as_mut` in docs for `pointer::as_ref`
It previously linked to the unstable const-mut-cast method instead of
the `mut` counterpart for `as_ref`.
Closes#96327
Use 64-bit time on 32-bit linux-gnu
The standard library suffered the [Year 2038 problem][Y2038] in two main places on targets with 32-bit `time_t`:
- In `std::time::SystemTime`, we stored a `timespec` that has `time_t` seconds. This is now changed to directly store 64-bit seconds and nanoseconds, and on 32-bit linux-gnu we try to use `__clock_gettime64` (glibc 2.34+) to get the larger timestamp.
- In `std::fs::Metadata`, we store a `stat64`, which has 64-bit `off_t` but still 32-bit `time_t`, and unfortunately that is baked in the API by the (deprecated) `MetadataExt::as_raw_stat()`. However, we can use `statx` for 64-bit `statx_timestamp` to store in addition to the `stat64`, as we already do to support creation time, and the rest of the `MetadataExt` methods can return those full values. Note that some filesystems may still be limited in their actual timestamp support, but that's not something Rust can change.
There remain a few places that need `timespec` for system call timeouts -- I leave that to future work.
[Y2038]: https://en.wikipedia.org/wiki/Year_2038_problem
Add a dedicated length-prefixing method to `Hasher`
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
Fixes#94026
r? rust-lang/libs
---
The core of this change is the following two new methods on `Hasher`:
```rust
pub trait Hasher {
/// Writes a length prefix into this hasher, as part of being prefix-free.
///
/// If you're implementing [`Hash`] for a custom collection, call this before
/// writing its contents to this `Hasher`. That way
/// `(collection![1, 2, 3], collection![4, 5])` and
/// `(collection![1, 2], collection![3, 4, 5])` will provide different
/// sequences of values to the `Hasher`
///
/// The `impl<T> Hash for [T]` includes a call to this method, so if you're
/// hashing a slice (or array or vector) via its `Hash::hash` method,
/// you should **not** call this yourself.
///
/// This method is only for providing domain separation. If you want to
/// hash a `usize` that represents part of the *data*, then it's important
/// that you pass it to [`Hasher::write_usize`] instead of to this method.
///
/// # Examples
///
/// ```
/// #![feature(hasher_prefixfree_extras)]
/// # // Stubs to make the `impl` below pass the compiler
/// # struct MyCollection<T>(Option<T>);
/// # impl<T> MyCollection<T> {
/// # fn len(&self) -> usize { todo!() }
/// # }
/// # impl<'a, T> IntoIterator for &'a MyCollection<T> {
/// # type Item = T;
/// # type IntoIter = std::iter::Empty<T>;
/// # fn into_iter(self) -> Self::IntoIter { todo!() }
/// # }
///
/// use std:#️⃣:{Hash, Hasher};
/// impl<T: Hash> Hash for MyCollection<T> {
/// fn hash<H: Hasher>(&self, state: &mut H) {
/// state.write_length_prefix(self.len());
/// for elt in self {
/// elt.hash(state);
/// }
/// }
/// }
/// ```
///
/// # Note to Implementers
///
/// If you've decided that your `Hasher` is willing to be susceptible to
/// Hash-DoS attacks, then you might consider skipping hashing some or all
/// of the `len` provided in the name of increased performance.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_length_prefix(&mut self, len: usize) {
self.write_usize(len);
}
/// Writes a single `str` into this hasher.
///
/// If you're implementing [`Hash`], you generally do not need to call this,
/// as the `impl Hash for str` does, so you can just use that.
///
/// This includes the domain separator for prefix-freedom, so you should
/// **not** call `Self::write_length_prefix` before calling this.
///
/// # Note to Implementers
///
/// The default implementation of this method includes a call to
/// [`Self::write_length_prefix`], so if your implementation of `Hasher`
/// doesn't care about prefix-freedom and you've thus overridden
/// that method to do nothing, there's no need to override this one.
///
/// This method is available to be overridden separately from the others
/// as `str` being UTF-8 means that it never contains `0xFF` bytes, which
/// can be used to provide prefix-freedom cheaper than hashing a length.
///
/// For example, if your `Hasher` works byte-by-byte (perhaps by accumulating
/// them into a buffer), then you can hash the bytes of the `str` followed
/// by a single `0xFF` byte.
///
/// If your `Hasher` works in chunks, you can also do this by being careful
/// about how you pad partial chunks. If the chunks are padded with `0x00`
/// bytes then just hashing an extra `0xFF` byte doesn't necessarily
/// provide prefix-freedom, as `"ab"` and `"ab\u{0}"` would likely hash
/// the same sequence of chunks. But if you pad with `0xFF` bytes instead,
/// ensuring at least one padding byte, then it can often provide
/// prefix-freedom cheaper than hashing the length would.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_str(&mut self, s: &str) {
self.write_length_prefix(s.len());
self.write(s.as_bytes());
}
}
```
With updates to the `Hash` implementations for slices and containers to call `write_length_prefix` instead of `write_usize`.
`write_str` defaults to using `write_length_prefix` since, as was pointed out in the issue, the `write_u8(0xFF)` approach is insufficient for hashers that work in chunks, as those would hash `"a\u{0}"` and `"a"` to the same thing. But since `SipHash` works byte-wise (there's an internal buffer to accumulate bytes until a full chunk is available) it overrides `write_str` to continue to use the add-non-UTF-8-byte approach.
---
Compatibility:
Because the default implementation of `write_length_prefix` calls `write_usize`, the changed hash implementation for slices will do the same thing the old one did on existing `Hasher`s.
Use futex-based locks and thread parker on {Free, Open, DragonFly}BSD.
This switches *BSD to our futex-based locks and thread parker.
Tracking issue: https://github.com/rust-lang/rust/issues/93740
This is a draft, because this still needs a new version of the `libc` crate to be published that includes https://github.com/rust-lang/libc/pull/2770.
r? `@Amanieu`
We might want to change the default before stabilizing (or maybe even after), but for getting in the new unstable methods, leave it as-is for now. That way it won't break cargo and such.
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
Implement [OsStr]::join
Implements join for `OsStr` and `OsString` slices:
```Rust
let strings = [OsStr::new("hello"), OsStr::new("dear"), OsStr::new("world")];
assert_eq!("hello dear world", strings.join(OsStr::new(" ")));
````
This saves one from converting to strings and back, or from implementing it manually.
Fix typo in `offset_from` documentation
Small fix for what I think is a typo in the `offset_from` documentation.
Someone reading this may understand that the distance in bytes is obtained by dividing the distance by `mem::size_of::<T>()`, but here we just want to define "units of T" in terms of bytes (i.e., units of T == bytes / `mem::size_of::<T>()`).
Update `int_roundings` methods from feedback
This updates `#![feature(int_roundings)]` (#88581) from feedback. All methods now take `NonZeroX`. The documentation makes clear that they panic in debug mode and wrap in release mode.
r? `@joshtriplett`
`@rustbot` label +T-libs +T-libs-api +S-waiting-on-review
Include nonexported macro_rules! macros in the doctest target
Fixes#88038
This PR aims to include nonexported `macro_rules!` macros in the doctest target. For more details, please see the above issue.
Avoid using `rand::thread_rng` in the stdlib benchmarks.
This is kind of an anti-pattern because it introduces extra nondeterminism for no real reason. In thread_rng's case this comes both from the random seed and also from the reseeding operations it does, which occasionally does syscalls (which adds additional nondeterminism). The impact of this would be pretty small in most cases, but it's a good practice to avoid (particularly because avoiding it was not hard).
Anyway, several of our benchmarks already did the right thing here anyway, so the change was pretty easy and mostly just applying it more universally. That said, the stdlib benchmarks aren't particularly stable (nor is our benchmark framework particularly great), so arguably this doesn't matter that much in practice.
~~Anyway, this also bumps the `rand` dev-dependency to 0.8, since it had fallen somewhat out of date.~~ Nevermind, too much of a headache.
Relax memory ordering used in SameMutexCheck
`SameMutexCheck` only requires atomicity for `self.addr`, but does not need ordering of other memory accesses in either the success or failure case. Using `Relaxed`, the code still correctly handles the case when two threads race to store an address.
Relax memory ordering used in `min_stack`
`min_stack` does not provide any synchronization guarantees to its callers, and only requires atomicity for `MIN` itself, so relaxed memory ordering is sufficient.
library/core: Fixes implement of c_uint, c_long, c_ulong
Fixes: aa67016624 ("make memcmp return a value of c_int_width instead of i32")
Introduce c_num_definition to getting the cfg_if logic easier to maintain
Add newlines for easier code reading
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
The security example shows that `env::current_exe` will return the
path used when the program was started. This is not really surprising
considering how hard links work: after `ln foo bar`, the two files are
_equivalent_. It is _not_ the case that `bar` is a “link” to `foo`,
nor is `foo` a link to `bar`. They are simply two names for the same
underlying data.
The security vulnerability linked to seems to be different: there an
attacker would start a SUID binary from a directory under the control
of the attacker. The binary would respawn itself by executing the
program found at `/proc/self/exe` (which the attacker can control).
This is a real problem. In my opinion, the example given here doesn’t
really show the same problem, it just shows a misunderstanding of what
hard links are.
I looked through the history a bit and found that the example was
introduced in #33526. That PR actually has two commits, and the
first (8478d48dad) explains the race
condition at the root of the linked security vulnerability. The second
commit proceeds to replace the explanation with the example we have
today.
This commit reverts most of the second commit from #33526.
It improves the performance of iterators using unchecked access when building in incremental mode
(due to the larger CGU count?). It might negatively affect incremental compile times for better runtime results,
but considering that the equivalent `next()` implementations also are `#[inline]` and usually are more complex this
should be ok.
```
./x.py bench library/core -i --stage 0 --test-args bench_trusted_random_access
OLD: 119,172 ns/iter
NEW: 17,714 ns/iter
```
Tweak the vec-calloc runtime check to only apply to shortish-arrays
r? `@Mark-Simulacrum`
`@nbdd0121` pointed out in https://github.com/rust-lang/rust/pull/95362#issuecomment-1114085395 that LLVM currently doesn't constant-fold the `IsZero` check for long arrays, so that seems like a reasonable justification for limiting it.
It appears that it's based on length, not byte size, (https://godbolt.org/z/4s48Y81dP), so that's what I used in the PR. Maybe it's a ["the number of inlining shall be three"](https://youtu.be/s4wnuiCwTGU?t=320) sort of situation.
Certainly there's more that could be done here -- that generated code that checks long arrays byte-by-byte is highly suboptimal, for example -- but this is an easy, low-risk tweak.
std::fmt: Various fixes and improvements to documentation
This PR contains the following changes:
- **Added argument index comments to examples for specifying precision**
The examples for specifying the precision have comments explaining which
argument the specifier is referring to. However, for implicit positional
arguments, the examples simply refer to "next arg". To simplify following the
comments, "next arg" was supplemented with the actual resulting argument index.
- **Fixed documentation for specifying precision via `.*`**
The documentation stated that in case of the syntax `{<arg>:<spec>.*}`, "the
`<arg>` part refers to the value to print, and the precision must come in the
input preceding `<arg>`". This is not correct: the <arg> part does indeed refer
to the value to print, but the precision does not come in the input preciding
arg, but in the next implicit input (as if specified with {}).
Fixes#96413.
- **Fix the grammar documentation**
According to the grammar documented, the format specifier `{: }` should not be
legal because of the whitespace it contains. However, in reality, this is
perfectly fine because the actual implementation allows spaces before the
closing brace. Fixes#71088.
Also, the exact meaning of most of the terminal symbols was not specified, for
example the meaning of `identifier`.
- **Removed reference to Formatter::buf and other private fields**
Formatter::buf is not a public field and therefore isn't very helpful in user-
facing documentation. Also, the other public fields of Formatter were removed
during stabilization of std::fmt (4af3494bb0) and can only be accessed via
getters.
- **Improved list of formatting macros**
Two improvements:
1. write! can not only receive a `io::Write`, but also a `fmt::Write` as first argument.
2. The description texts now contain links to the actual macros for easier
navigation.
Clarify docs for `from_raw_parts` on `Vec` and `String`
Closes#95427
Original safety explanation for `from_raw_parts` was unclear on safety for consuming a C string. This clarifies when doing so is safe.
Classify BinaryHeap & LinkedList unit tests as such
All but one of these so-called integration test case are unit tests, just like btree's were (#75531). In addition, reunite the unit tests of linked_list that were split off during #23104 because they needed to remain unit tests (they were later moved to the separate file they are in during #63207). The two sets could remain separate files, but I opted to merge them back together, more or less in the order they used to be, apart from one duplicate name `test_split_off` and one duplicate tiny function `list_from`.
`SameMutexCheck` only requires atomicity for `self.addr`, but does not need ordering of other memory accesses in either the success or failure case. Using `Relaxed`, the code still correctly handles the case when two threads race to store an address.
`min_stack` does not provide any synchronization guarantees to its callers, and only requires atomicity for `MIN` itself, so relaxed memory ordering is sufficient.
rustdoc: Resolve doc links referring to `macro_rules` items
cc https://github.com/rust-lang/rust/issues/81633
UPD: the fallback to considering *all* `macro_rules` in the crate for unresolved names is not removed in this PR, it will be removed separately and will be run through crater.
Using unwrap_unchecked helps the optimizer to not generate panicking
path, that will never be taken for valid UTF-8 like string.
Using encode_utf8 saves us a call to a memcpy, as the optimizer is
unable to realize that ch_len <= 4 and so can generate much better
assembly code.
https://rust.godbolt.org/z/z73ohenfc
Two improvements:
1. write! can not only receive a `io::Write`, but also a `fmt::Write` as first argument.
2. The description texts now contain links to the actual macros for easier
navigation.
Formatter::buf is not a public field and therefore isn't very helpful in user-
facing documentation. Also, the other public fields of Formatter were made
private during stabilization of std::fmt (4af3494bb0) and can now only be read
via accessor methods.
According to the grammar documented, the format specifier `{: }` should not be
legal because of the whitespace it contains. However, in reality, this is
perfectly fine because the actual implementation allows spaces before the
closing brace. Fixes#71088.
Also, the exact meaning of most of the terminal symbols was not specified, for
example the meaning of `identifier`.
The examples for specifying the precision have comments explaining which
argument the specifier is referring to. However, for implicit positional
arguments, the examples simply talk about "next arg". To make it easier for
readers to follow the comments, "next arg" was supplemented with the actual
resulting argument index.
The documentation stated that in case of the syntax `{<arg>:<spec>.*}`, "the
`<arg>` part refers to the value to print, and the precision must come in the
input preceding `<arg>`". This is not correct: the <arg> part does indeed refer
to the value to print, but the precision does not come in the input preciding
arg, but in the next implicit input (as if specified with {}).
Fixes#96413.
Implement str to [u8] conversion for refcounted containers
This seems motivated to complete the APIs for shared containers since we already have similar allocation-free conversions for strings like `From<Box<[u8]>> for Box<str>`.
Insta-stable since it's a new trait impl?
Make [e]println macros eagerly drop temporaries (for backport)
This PR extracts the subset of #96455 which is only the parts necessary for fixing the 1.61-beta regressions in #96434.
My larger PR #96455 contains a few other changes relative to the pre-#94868 behavior; those are not necessary to backport into 1.61.
argument position | before #94868 | after #94868 | after this PR
--- |:---:|:---:|:---:
`write!($tmp, "…", …)` | 😡 | 😡 | 😡
`write!(…, "…", $tmp)` | 😡 | 😡 | 😡
`writeln!($tmp, "…", …)` | 😡 | 😡 | 😡
`writeln!(…, "…", $tmp)` | 😡 | 😡 | 😡
`print!("…", $tmp)` | 😡 | 😡 | 😡
`println!("…", $tmp)` | 😺 | 😡 | 😺
`eprint!("…", $tmp)` | 😡 | 😡 | 😡
`eprintln!("…", $tmp)` | 😺 | 😡 | 😺
`panic!("…", $tmp)` | 😺 | 😺 | 😺
Using an obviously-placeholder syntax. An RFC would still be needed before this could have any chance at stabilization, and it might be removed at any point.
But I'd really like to have it in nightly at least to ensure it works well with try_trait_v2, especially as we refactor the traits.
Revert "Re-export core::ffi types from std::ffi"
This reverts commit 9aed829fe6.
Fixes https://github.com/rust-lang/rust/issues/96435 , a regression
in crates doing `use std::ffi::*;` and `use std::os::raw::*;`.
We can re-add this re-export once the `core::ffi` types
are stable, and thus the `std::os::raw` types can become re-exports as
well, which will avoid the conflict. (Type aliases to the same type
still conflict, but re-exports of the same type don't.)
Windows: Make stdin pipes synchronous
Stdin pipes do not need to be used asynchronously within the standard library. This is a first step in making pipes mostly synchronous.
r? `@m-ou-se`
std: directly use pthread in UNIX parker implementation
`Mutex` and `Condvar` are being replaced by more efficient implementations, which need thread parking themselves (see #93740). Therefore we should use the `pthread` synchronization primitives directly. Also, we can avoid allocating the mutex and condition variable because the `Parker` struct is being placed in an `Arc` anyways.
This basically is just a copy of the current `Mutex` and `Condvar` code, which will however be removed (again, see #93740). An alternative implementation could be to use dedicated private `OsMutex` and `OsCondvar` types, but all the other platforms supported by std actually have their own thread parking primitives.
I used `Pin` to guarantee a stable address for the `Parker` struct, while the current implementation does not, rather using extra unsafe declaration. Since the thread struct is shared anyways, I assumed this would not add too much clutter while being clearer.
rustc_ast: Harmonize delimiter naming with `proc_macro::Delimiter`
Compiler cannot reuse `proc_macro::Delimiter` directly due to extra impls, but can at least use the same naming.
After this PR the only difference between these two enums is that `proc_macro::Delimiter::None` is turned into `token::Delimiter::Invisible`.
It's my mistake that the invisible delimiter is called `None` on stable, during the stabilization I audited the naming and wrote the docs, but missed the fact that the `None` naming gives a wrong and confusing impression about what this thing is.
cc https://github.com/rust-lang/rust/pull/96421
r? ``@nnethercote``
Add VecDeque::extend from vec::IntoIter and slice::Iter specializations
Inspired from the [`Vec` `SpecExtend` implementation](027a232755/library/alloc/src/vec/spec_extend.rs), but without the specialization for `TrustedLen` which I'll look into in the future.
Should help #95632 and https://github.com/KillingSpark/zstd-rs/pull/17
## Benchmarks
Before
```
test vec_deque::bench_extend_bytes ... bench: 862 ns/iter (+/- 10)
test vec_deque::bench_extend_vec ... bench: 883 ns/iter (+/- 19)
```
After
```
test vec_deque::bench_extend_bytes ... bench: 8 ns/iter (+/- 0)
test vec_deque::bench_extend_vec ... bench: 24 ns/iter (+/- 1)
```
Make EncodeWide implement FusedIterator
[`EncodeUtf16`](https://doc.rust-lang.org/std/str/struct.EncodeUtf16.html) and [`EncodeWide`](https://doc.rust-lang.org/std/os/windows/ffi/struct.EncodeWide.html) currently serve similar purposes: They convert from UTF-8 to UTF-16 and WTF-8 to WTF-16, respectively. `EncodeUtf16` wraps a &str, whereas `EncodeWide` wraps an &OsStr.
When Iteration has concluded, these iterators wrap an empty slice, which will forever yield `None` values. Hence, `EncodeUtf16` rightfully implements `FusedIterator`. However, `EncodeWide` in contrast does not, even though it serves an almost identical purpose.
This PR attempts to fix that issue. I consider this change minor and non-controversial, hence why I have not added a RFC/FCP. Please let me know if the stability attribute is wrong or contains a wrong version number. Thanks in advance.
Fixes https://github.com/rust-lang/rust/issues/96368
This reverts commit 9aed829fe6.
Fixes https://github.com/rust-lang/rust/issues/96435 , a regression
in crates doing `use std::ffi::*;` and `use std::os::raw::*;`.
We can re-add this re-export once the `core::ffi` types
are stable, and thus the `std::os::raw` types can become re-exports as
well, which will avoid the conflict. (Type aliases to the same type
still conflict, but re-exports of the same type don't.)
Define a dedicated error type for `HandleOrNull` and `HandleOrInvalid`.
Define `NullHandleError` and `InvalidHandleError` types, that implement std::error::Error, and use them as the error types in `HandleOrNull` and `HandleOrInvalid`,
This addresses [this concern](https://github.com/rust-lang/rust/issues/87074#issuecomment-1080031167).
This is the same as #95387.
r? `@joshtriplett`
Clarify that `Cow::into_owned` returns owned data
Two sections of the `Cow::into_owned` docs imply that `into_owned` returns a `Cow`. Clarify that it returns the underlying owned object, either cloned or extracted from the `Cow`.
Fix some confusing wording and improve slice-search-related docs
This adds more links between `contains` and `binary_search` because I do think they have some relevant connections. If your (big) slice happens to be sorted and you know it, surely you should be using `[3; 100].binary_search(&5).is_ok()` over `[3; 100].contains(&5)`?
This also fixes the confusing "searches this sorted X" wording which just sounds really weird because it doesn't know whether it's actually sorted. It should be but it may not be. The new wording should make it clearer that you will probably want to sort it and in the same sentence it also mentions the related function `contains`.
Similarly, this mentions `binary_search` on `contains`' docs.
This also fixes some other minor stuff and inconsistencies.
Mutex and Condvar are being replaced by more efficient implementations, which need thread parking themselves (see #93740). Therefore use the pthread synchronization primitives directly. Also, avoid allocating because the Parker struct is being placed in an Arc anyways.
Windows Command: Don't run batch files using verbatim paths
Fixes#95178
Note that the first commit does some minor refactoring (moving command line argument building to args.rs). The actual changes are in the second.
[test] Add test cases for untested functions for VecDeque
Added test cases of the following functions
- get
- get_mut
- swap
- reserve_exact
- try_reserve_exact
- try_reserve
- contains
- rotate_left
- rotate_right
- binary_search
- binary_search_by
- binary_search_by_key
Unstably constify `impl<I: Iterator> IntoIterator for I`
This constifies the default `IntoIterator` implementation under the `const_intoiterator_identity` feature.
Tracking Issue: #90603
No "weird" floats in const fn {from,to}_bits
I suspect this code is subtly incorrect and that we don't even e.g. use x87-style floats in CTFE, so I don't have to guard against that case. A future PR will be hopefully removing them from concern entirely, anyways. But at the moment I wanted to get this rolling because small questions like that one seem best answered by review.
r? `@oli-obk`
cc `@eddyb` `@thomcc`
Reduce allocations for path conversions on Windows
Previously, UTF-8 to UTF-16 Path conversions on Windows unnecessarily allocate twice, as described in #96297. This commit fixes that issue.
Improve Windows path prefix parsing
This PR fixes improves parsing of Windows path prefixes. `parse_prefix` now supports both types of separators on Windows (`/` and `\`).
Fixes: aa67016624 ("make memcmp return a value of c_int_width instead of i32")
Introduce c_num_definition to getting the cfg_if logic easier to maintain
Add newlines for easier code reading
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
[fuchsia] Add implementation for `current_exe`
This implementation returns a best attempt at the current exe path. On
fuchsia, fdio will always use `argv[0]` as the process name and if it is
not set then an error will be returned. Because this is not guaranteed
to be the case, this implementation returns an error if `argv` does not
contain any elements.
remove_dir_all_recursive: treat ELOOP the same as ENOTDIR
On older Linux kernels (I tested on 4.4, corresponding to Ubuntu 16.04), opening a symlink using `O_DIRECTORY | O_NOFOLLOW` returns `ELOOP` instead of `ENOTDIR`. We should handle it the same, since a symlink is still not a directory and needs to be `unlink`ed.
Use sys::unix::locks::futex* on wasm+atomics.
This removes the wasm-specific lock implementations and instead re-uses the implementations from sys::unix.
Tracking issue: https://github.com/rust-lang/rust/issues/93740
cc ``@alexcrichton``
Improve AddrParseError description
The existing description was incorrect for socket addresses, and misleading: users would see “invalid IP address syntax” and suppose they were supposed to provide an IP address rather than a socket address.
I contemplated making it two variants (IP, socket), but realised we can do still better for the IPv4 and IPv6 types, so here it is as six.
I contemplated more precise error descriptions (e.g. “invalid IPv6 socket address syntax: expected a decimal scope ID after %”), but that’s a more invasive change, and probably not worthwhile anyway.
Making `BorrowedFd::borrow_raw` a const fn allows it to be used to
create a constant `BorrowedFd<'static>` holding constants such as
`AT_FDCWD`. This will allow [`rustix::fs::cwd`] to become a const fn.
For consistency, make similar changes to `BorrowedHandle::borrow_raw`
and `BorrowedSocket::borrow_raw`.
[`rustix::fs::cwd`]: https://docs.rs/rustix/latest/rustix/fs/fn.cwd.html
This implementation returns a best attempt at the current exe path. On
fuchsia, fdio will always use `argv[0]` as the process name and if it is
not set then an error will be returned. Because this is not guaranteed
to be the case, this implementation returns an error if `argv` does not
contain any elements.
`alloc`: make `vec!` unavailable under `no_global_oom_handling`
`alloc`: make `vec!` unavailable under `no_global_oom_handling`
The `vec!` macro has 3 rules, but two are not usable under
`no_global_oom_handling` builds of the standard library
(even with a zero size):
```rust
let _ = vec![42]; // Error: requires `exchange_malloc` lang_item.
let _ = vec![42; 0]; // Error: cannot find function `from_elem`.
```
Thus those two rules should not be available to begin with.
The remaining one, with an empty matcher, is just a shorthand for
`new()` and may not make as much sense to have alone, since the
idea behind `vec!` is to enable `Vec`s to be defined with the same
syntax as array expressions. Furthermore, the documentation can be
confusing since it shows the other rules.
Thus perhaps it is better and simpler to disable `vec!` entirely
under `no_global_oom_handling` environments, and let users call
`new()` instead:
```rust
let _: Vec<i32> = vec![];
let _: Vec<i32> = Vec::new();
```
Notwithstanding this, a `try_vec!` macro would be useful, such as
the one introduced in https://github.com/rust-lang/rust/pull/95051.
If the shorthand for `new()` is deemed worth keeping on its own,
then it may be interesting to have a separate `vec!` macro with
a single rule and different, simpler documentation.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The existing description was incorrect for socket addresses, and
misleading: users would see “invalid IP address syntax” and suppose they
were supposed to provide an IP address rather than a socket address.
I contemplated making it two variants (IP, socket), but realised we can
do still better for the IPv4 and IPv6 types, so here it is as six.
I contemplated more precise error descriptions (e.g. “invalid IPv6
socket address syntax: expected a decimal scope ID after %”), but that’s
a more invasive change, and probably not worthwhile anyway.
Add slice::remainder
This adds a remainder function to the Slice iterator, so that a caller can access unused
elements if iteration stops.
Addresses #91733
