Remove hacks in `make_token_stream`.
`make_tokenstream` has three commented hacks, and a comment at the top
referring to #67062. These hacks have no observable effect, at least as judged
by running the test suite. The hacks were added in #82608, with an explanation
[here](https://github.com/rust-lang/rust/pull/82608#issuecomment-812877329). It
appears that one of the following is true: (a) they never did anything useful,
(b) they do something useful but we have no test coverage for them, or (c)
something has changed in the meantime that means they are no longer necessary.
This commit removes the hacks and the comments, in the hope that (b) is not
true.
r? `@Aaron1011`
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Overhaul `MacArgs`
Motivation:
- Clarify some code that I found hard to understand.
- Eliminate one use of three places where `TokenKind::Interpolated` values are created.
r? `@petrochenkov`
The value in `MacArgs::Eq` is currently represented as a `Token`.
Because of `TokenKind::Interpolated`, `Token` can be either a token or
an arbitrary AST fragment. In practice, a `MacArgs::Eq` starts out as a
literal or macro call AST fragment, and then is later lowered to a
literal token. But this is very non-obvious. `Token` is a much more
general type than what is needed.
This commit restricts things, by introducing a new type `MacArgsEqKind`
that is either an AST expression (pre-lowering) or an AST literal
(post-lowering). The downside is that the code is a bit more verbose in
a few places. The benefit is that makes it much clearer what the
possibilities are (though also shorter in some other places). Also, it
removes one use of `TokenKind::Interpolated`, taking us a step closer to
removing that variant, which will let us make `Token` impl `Copy` and
remove many "handle Interpolated" code paths in the parser.
Things to note:
- Error messages have improved. Messages like this:
```
unexpected token: `"bug" + "found"`
```
now say "unexpected expression", which makes more sense. Although
arbitrary expressions can exist within tokens thanks to
`TokenKind::Interpolated`, that's not obvious to anyone who doesn't
know compiler internals.
- In `parse_mac_args_common`, we no longer need to collect tokens for
the value expression.
Using an obviously-placeholder syntax. An RFC would still be needed before this could have any chance at stabilization, and it might be removed at any point.
But I'd really like to have it in nightly at least to ensure it works well with try_trait_v2, especially as we refactor the traits.
`make_tokenstream` has three commented hacks, and a comment at the top
referring to #67062. These hacks have no observable effect, at least as judged
by running the test suite. The hacks were added in #82608, with an explanation
[here](https://github.com/rust-lang/rust/pull/82608#issuecomment-812877329). It
appears that one of the following is true: (a) they never did anything useful,
(b) they do something useful but we have no test coverage for them, or (c)
something has changed in the meantime that means they are no longer necessary.
This commit removes the hacks and the comments, in the hope that (b) is not
true.
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
rustc_ast: Harmonize delimiter naming with `proc_macro::Delimiter`
Compiler cannot reuse `proc_macro::Delimiter` directly due to extra impls, but can at least use the same naming.
After this PR the only difference between these two enums is that `proc_macro::Delimiter::None` is turned into `token::Delimiter::Invisible`.
It's my mistake that the invisible delimiter is called `None` on stable, during the stabilization I audited the naming and wrote the docs, but missed the fact that the `None` naming gives a wrong and confusing impression about what this thing is.
cc https://github.com/rust-lang/rust/pull/96421
r? ``@nnethercote``
Less `NoDelim`
Currently there are several places where `NoDelim` (which really means "implicit delimiter" or "invisible delimiter") is used to mean "no delimiter". The name `NoDelim` is a bit misleading, and may be a cause.
This PR changes these places, e.g. by changing a `DelimToken` to `Option<DelimToken>` and then using `None` to mean "no delimiter". As a result, the *only* place where `NoDelim` values are now produced is within:
- `Delimiter::to_internal()`, when converting from `Delimiter::None`.
- `FlattenNonterminals::process_token()`, when converting `TokenKind::Interpolated`.
r? ````@petrochenkov````
This lets us clone just the parts within a `TokenTree` that need
cloning, rather than the entire thing. This is a surprisingly large
performance win, up to 4% on `async-std-1.10.0`.
This makes `CloseDelim` handling more like `OpenDelim` handling, which
produces `OpenDelim` and pushes the stack at the same time. It requires
some adjustment to `parse_token_tree` now that we don't remain within
the frame after getting the `CloseDelim`.
A Google search of the error message fails to return any relevant
resuts, suggesting this has never occurred in practice. And removeing it
reduces instruction counts by up to 2% on some benchmarks.
The loop is there to handle a `NoDelim` open/close token. This commit
changes `TokenCursor::inlined_next` so it never returns such a token.
This is a performance win because the conditional test in `bump()` is
removed.
If the parser needs changing in the future to handle `NoDelim` tokens,
then `inlined_next()` can easily be changed to return them.
The `DelimToken` here is `NoDelim`, which means the returned delim
tokens will just be ignored by `Parser::bump()`. This commit changes
things so the delim tokens won't be returned.
This will facilitate the change in the next commit.
`boolean` arguments aren't great, but the function is only used in three
places within this one file.
In particular, avoid wrapping a token within `TokenTree::Token` and then
immediately matching it and returning the token within. Just return the
token immediately.
Parse inner attributes on inline const block
According to https://github.com/rust-lang/rust/pull/84414#issuecomment-826150936, inner attributes are intended to be supported *"in all containers for statements (or some subset of statements)"*.
This PR adds inner attribute parsing and pretty-printing for inline const blocks (https://github.com/rust-lang/rust/issues/76001), which contain statements just like an unsafe block or a loop body.
```rust
let _ = const {
#![allow(...)]
let x = ();
x
};
```
Improve diagnostics for unterminated nested block comment
close#95283
(This is my first time try to messing around with rust compiler and might get a lot of things wrong... 🙇 )
By heap allocating the argument within `NtPath`, `NtVis`, and `NtStmt`.
This slightly reduces cumulative and peak allocation amounts, most
notably on `deep-vector`.
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Introduce a `DiagnosticMessage` type that will enable diagnostic
messages to be simple strings or Fluent identifiers.
`DiagnosticMessage` is now used in the implementation of the standard
`DiagnosticBuilder` APIs.
Signed-off-by: David Wood <david.wood@huawei.com>
Suggest `i += 1` when we see `i++` or `++i`
Closes#83502 (for `i++` and `++i`; `--i` should be covered by #82987, and `i--`
is tricky to handle).
This is a continuation of #83536.
r? `@estebank`
Fix multiline attributes handling in doctests
Fixes#55713.
I needed to have access to the `unclosed_delims` field in order to check that the attribute was completely parsed and didn't have missing parts, so I created a getter for it.
r? `@notriddle`
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
Remove `Nonterminal::NtTT`.
It's only needed for macro expansion, not as a general element in the
AST. This commit removes it, adds `NtOrTt` for the parser and macro
expansion cases, and renames the variants in `NamedMatch` to better
match the new type.
r? `@petrochenkov`
It's only needed for macro expansion, not as a general element in the
AST. This commit removes it, adds `NtOrTt` for the parser and macro
expansion cases, and renames the variants in `NamedMatch` to better
match the new type.
Provide suggestion for missing `>` in a type parameter list
When encountering an inproperly terminated type parameter list, provide
a suggestion to close it after the last non-constraint type parameter
that was successfully parsed.
Fix#94058.
When encountering an inproperly terminated type parameter list, provide
a suggestion to close it after the last non-constraint type parameter
that was successfully parsed.
Fix#94058.
Remove `Session::one_time_diagnostic`
This is untracked mutable state, which modified the behaviour of queries.
It was used for 2 things: some full-blown errors, but mostly for lint declaration notes ("the lint level is defined here" notes).
It is replaced by the diagnostic deduplication infra which already exists in the diagnostic emitter.
A new diagnostic level `OnceNote` is introduced specifically for lint notes, to deduplicate subdiagnostics.
As a drive-by, diagnostic emission takes a `&mut` to allow dropping the `SubDiagnostic`s.
`run-rustfix` applies all suggestions regardless of their Applicability.
There's a flag, `rustfix-only-machine-applicable`, that does what it
says, but then the produced `.fixed` file would have invalid code from
the suggestions that weren't applied. So, I moved the cases of postfix
increment, in which case multiple suggestions are given, to the
`-notfixed` test, which does not run rustfix.
I also changed the Applicability to Unspecified since MaybeIncorrect
requires that the code be valid, even if it's incorrect.
Inline some parser functions
Some crates that do a lot of complex declarative macro expansion spend a lot of time parsing (and reparsing) tokens. These commits inline some functions for some minor speed wins.
r? `@ghost`
The call site within `Parser::bump` is hot.
Also add an inline annotation to `Parser::next_tok`. It was already
being inlined by the compiler; this just makes sure that continues.
suggest removing type ascription in bad parsing position
Not sure how to test this with the non-nightly suggestion. Didn't add a new UI test because it already manifests in an existing UI test.
Fixes#95014
Make ErrorReported impossible to construct outside `rustc_errors`
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
cc #69426 `@varkor` `@eddyb` `@estebank`
I actually didn't see that I was assigned to this issue until now...
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
More robust fallback for `use` suggestion
Our old way to suggest where to add `use`s would first look for pre-existing `use`s in the relevant crate/module, and if there are *no* uses, it would fallback on trying to use another item as the basis for the suggestion.
But this was fragile, as illustrated in issue #87613
This PR instead identifies span of the first token after any inner attributes, and uses *that* as the fallback for the `use` suggestion.
Fix#87613
then we just suggest the first legal position where you could inject a use.
To do this, I added `inject_use_span` field to `ModSpans`, and populate it in
parser (it is the span of the first token found after inner attributes, if any).
Then I rewrote the use-suggestion code to utilize it, and threw out some stuff
that is now unnecessary with this in place. (I think the result is easier to
understand.)
Then I added a test of issue 87613.
* Recover from invalid `'label: ` before block.
* Make suggestion to enclose statements in a block multipart.
* Point at `match`, `while`, `loop` and `unsafe` keywords when failing
to parse their expression.
* Do not suggest `{ ; }`.
* Do not suggest `|` when very unlikely to be what was wanted (in `let`
statements).
Adopt let else in more places
Continuation of #89933, #91018, #91481, #93046, #93590, #94011.
I have extended my clippy lint to also recognize tuple passing and match statements. The diff caused by fixing it is way above 1 thousand lines. Thus, I split it up into multiple pull requests to make reviewing easier. This is the biggest of these PRs and handles the changes outside of rustdoc, rustc_typeck, rustc_const_eval, rustc_trait_selection, which were handled in PRs #94139, #94142, #94143, #94144.
i'd guess about 70% of "bad escape" cases occur when someone meant to
use a raw string literal because they're passing it directly to
Regex::new(). this emits an advisory (Applicability::MaybeIncorrect)
help: suggestion to the user that they use an r"" string,
on top of the normal notes about looking at the
string literal documentation/spec.
fix ICE when parsing lifetime as function argument
I don't really like this, but we basically need to emit an error instead of just delaying an bug, because there are too many places in the AST that aren't covered by my previous PRs...
cc: https://github.com/rust-lang/rust/issues/93282#issuecomment-1028052945
If an integer is entered with an upper-case base prefix (0Xbeef, 0O755, 0B1010), suggest to make it lowercase
The current error for this case isn't really great, it just complains about the whole thing past the `0` being an invalid suffix.
Incorporate distance limit from `find_best_match_for_name` directly into
Levenshtein distance computation.
Use the string size difference as a lower bound on the distance and exit
early when it exceeds the specified limit.
After finding a candidate within a limit, lower the limit further to
restrict the search space.
Let qpath contain NtTy: `<$:ty as $:ty>::…`
Example:
```rust
macro_rules! m {
(<$type:ty as $trait:ty>::$name:ident) => {
<$type as $trait>::$name
};
}
fn main() {
let _: m!(<str as ToOwned>::Owned);
}
```
Previous behavior:
```console
error: expected identifier, found `ToOwned`
--> src/main.rs:3:19
|
3 | <$type as $trait>::$name
| ^^^^^^ expected identifier
...
8 | let _: m!(<str as ToOwned>::Owned);
| ---------------------------
| |
| this macro call doesn't expand to a type
| in this macro invocation
```
The <code>expected identifier, found \`ToOwned\`</code> error is particularly silly. I think it should be fine to accept this code as long as $trait is of the form `TyKind::Path(None, path)`; if it is any other kind of `NtTy`, we'll keep the same behavior as before.
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
Fix suggesting turbofish with lifetime arguments
Now we suggest turbofish correctly given exprs like `foo<'_>`.
Also fix suggestion when we have `let x = foo<bar, baz>;` which was broken.
Parse `Ty?` as `Option<Ty>` and provide structured suggestion
Swift has specific syntax that desugars to `Option<T>` similar to our
`?` operator, which means that people might try to use it in Rust. Parse
it and gracefully recover.
Swift has specific syntax that desugars to `Option<T>` similar to our
`?` operator, which means that people might try to use it in Rust. Parse
it and gracefully recover.
