Allow specifying an deployment target version for all iOS llvm targets
Closes: https://github.com/rust-lang/rust/issues/79408
This pull requests adds the same procedure to define the iOS-version for the LLVM-target as was used for the simulator target and the desktop target.
This then closes the original problem mentioned in the above issue. The problem with incompatible bitcode remains, but is probably not easy fixable.
I realised that something is still not right. Try to fix that.
r? `@petrochenkov`
Generate an iOS LLVM target with a specific version
This commit adds the `LC_VERSION_MIN_IPHONEOS` load command to the Mach-O header generated for `aarch64-apple-ios` binaries. The operating system will look for this load command to determine the minimum supported operating system version and will not allow the binary to run if it's absent. This logic already exists for the simulator toolchain.
I've been using `otool` from a [cctools](https://github.com/tpoechtrager/cctools-port) toolchain to parse the header and validate that this change adds the required load command.
This change appears to be enough to build Rust binaries that can run on a jailbroken iPhone.
Upgrade to LLVM 13
Work in progress update to LLVM 13. Main changes:
* InlineAsm diagnostics reported using SrcMgr diagnostic kind are now handled. Previously these used a separate diag handler.
* Codegen tests are updated for additional attributes.
* Some data layouts have changed.
* Switch `#[used]` attribute from `llvm.used` to `llvm.compiler.used` to avoid SHF_GNU_RETAIN flag introduced in https://reviews.llvm.org/D97448, which appears to trigger a bug in older versions of gold.
* Set `LLVM_INCLUDE_TESTS=OFF` to avoid Python 3.6 requirement.
Upstream issues:
* ~~https://bugs.llvm.org/show_bug.cgi?id=51210 (InlineAsm diagnostic reporting for module asm)~~ Fixed by 1558bb80c0.
* ~~https://bugs.llvm.org/show_bug.cgi?id=51476 (Miscompile on AArch64 due to incorrect comparison elimination)~~ Fixed by 81b106584f.
* https://bugs.llvm.org/show_bug.cgi?id=51207 (Can't set custom section flags anymore). Problematic change reverted in our fork, https://reviews.llvm.org/D107216 posted for upstream revert.
* https://bugs.llvm.org/show_bug.cgi?id=51211 (Regression in codegen for #83623). This is an optimization regression that we may likely have to eat for this release. The fix for #83623 was based on an incorrect premise, and this needs to be properly addressed in the MergeICmps pass.
The [compile-time impact](https://perf.rust-lang.org/compare.html?start=ef9549b6c0efb7525c9b012148689c8d070f9bc0&end=0983094463497eec22d550dad25576a894687002) is mixed, but quite positive as LLVM upgrades go.
The LLVM 13 final release is scheduled for Sep 21st. The current nightly is scheduled for stable release on Oct 21st.
r? `@ghost`
Without the specific version, the mach-o header will be missing the
minimum supported operating system version. This is mandatory for
running Rust binaries on iOS devices.
Add support for clobber_abi to asm!
This PR adds the `clobber_abi` feature that was proposed in #81092.
Fixes#81092
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
Add c_enum_min_bits target spec field, use for arm-none and thumb-none targets
Fixes https://github.com/rust-lang/rust/issues/87917
<s>Haven't tested this yet, still playing around.</s>
This seems to fix the issue.
* This commit adds the aarch64-unknown-uefi target and also adds it into
the supported targets list under the tier-3 target table.
* Uses the small code model by default
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Use small code model for UEFI targets
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
Do not allow JSON targets to set is-builtin: true
Note that this will affect (and make builds fail for) all of the projects out there that have target files invalid in this way. Crater, however, does not really cover these kinds of the codebases, so it is quite difficult to measure the impact. That said, the target files invalid in this way can start causing build failures each time LLVM is upgraded, anyway, so it is probably a good opportunity to disallow this property, entirely.
Another approach considered was to simply not parse this field anymore, which would avoid making the builds explicitly fail, but it wasn't clear to me if `is-builtin` was always set unintentionally… In case this was the case, I'd expect people to file a feature request stating specifically for what purpose they were using `is-builtin`.
Fixes#86017
* Since the code model only applies to the code and not the data and the code model
only applies to functions you call through using `call`, `jmp` and data with `lea`, etc…
If you are calling functions using the function pointers from the UEFI structures the code
model does not apply in that case. It’s just related to the address space size of your own binary.
Since UEFI (uefi is all relocatable) uses relocatable PEs (relocatable code does not care about the
code model) so, we use the small code model here.
* Since applications don't usually take gigabytes of memory, setting the
target to use the small code model should result in better codegen (comparable
with majority of other targets).
Large code models are also known for generating horrible code, for
example 16 bytes of code to load a single 8-byte value.
* Use the LLVM default code model for the architecture for the
x86_64-unknown-uefi targets. For reference small is the default
code model on x86 in LLVM: <7de2173c2a/llvm/lib/Target/X86/X86TargetMachine.cpp (L204)>
* Remove the comments too as they are not UEFI-specific and applies
to pretty much any target. I added them before as I was explicitily
setting the code model to small.
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
All eabi targets have target_abi = "eabi".
All eabihf targets have target_abi = "eabihf".
armv6_unknown_freebsd and armv7_unknown_freebsd have target_abi = "eabihf".
All abi64 targets have target_abi = "abi64".
All ilp32 targets have target_abi = "ilp32".
All softfloat targets have target_abi = "softfloat".
All *-uwp-windows-* targets have target_abi = "uwp".
All spe targets have target_abi = "spe".
All macabi targets have target_abi = "macabi".
aarch64-apple-ios-sim has target_abi = "sim".
x86_64-fortanix-unknown-sgx has target_abi = "fortanix".
x86_64-unknown-linux-gnux32 has target_abi = "x32".
Add FIXME entries for targets for which existing values need to change
once cfg_target_abi becomes stable. (All of them are tier 3 targets.)
Add a test for target_abi in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
Fixes#57182
Sponsored by: standard.ai
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Emit warnings for unused fields in custom targets.
Add a warning which lists any fields in a custom target `json` file that aren't used. Currently unrecognized fields are ignored so, for example, a typo in the `json` will silently produce a target which isn't the one intended.
Tweak wasm_base target spec to indicate linker is not GNU and update linker inferring logic for wasm-ld.
Reported via [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/wasi.20linker.20unknown.20argument.3A.20--as-needed): we try passing `--as-needed` to the linker if it's GNU ld which `wasm-ld` is not. Usually this isn't an issue for wasm as we would use the WasmLd linker driver but because the linker in question (`wasm32-unknown-wasi-wasm-ld`) ended with `-ld` our linker inferring [logic](f64503eb55/compiler/rustc_codegen_ssa/src/back/link.rs (L957-L1040)) used the `GccLinker` implementations. (UPD: The linker inferring logic actually didn't apply in this case because the linker is actually invoked through gcc in the reported issue. But it's still worth updating the logic I think.)
This change then has 2 parts:
1. Update wasm_base target spec to indicate `linker_is_gnu: false` plus a few additions of `target.is_like_wasm` to handle flags `wasm-ld` does in fact support.
2. Improve the linker detection logic to properly determine the correct flavor of wasm linker we're using when we can.
We need to add the new `target.is_like_wasm` branches to handle the case where the "linker" used could be something like clang which would then under the hood call wasm-ld.
BPF target support
This adds `bpfel-unknown-none` and `bpfeb-unknown-none`, two new no_std targets that generate little and big endian BPF. The approach taken is very similar to the cuda target, where `TargetOptions::obj_is_bitcode` is enabled and code generation is done by the linker.
I added the targets to `dist-various-2`. There are [some tests](https://github.com/alessandrod/bpf-linker/tree/main/tests/assembly) in bpf-linker and I'm planning to add more. Those are currently not ran as part of rust CI.
wasm: Make simd types passed via indirection again
This commit updates wasm target specs to use `simd_types_indirect: true`
again. Long ago this was added since wasm simd types were always
translated to `v128` under-the-hood in LLVM, meaning that it didn't
matter whether that target feature was enabled or not. Now, however,
`v128` is conditionally used in codegen depending on target features
enabled, meaning that it's possible to get linker errors about different
signatures in code that correctly uses simd types. The fix is the same
as for all other platforms, which is to pass the type indirectly.
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
This commit updates wasm target specs to use `simd_types_indirect: true`
again. Long ago this was added since wasm simd types were always
translated to `v128` under-the-hood in LLVM, meaning that it didn't
matter whether that target feature was enabled or not. Now, however,
`v128` is conditionally used in codegen depending on target features
enabled, meaning that it's possible to get linker errors about different
signatures in code that correctly uses simd types. The fix is the same
as for all other platforms, which is to pass the type indirectly.
Turn off frame pointer elimination on all Apple platforms.
This ends up disabling frame pointer elimination on aarch64_apple_darwin
which matches what clang does by default along with the
aarch64_apple_ios and x86_64_apple_darwin targets.
Further, the Apple docs "Writing ARM64 Code for Apple Platforms" has a section
called "Respect the Purpose of Specific CPU Registers" which
specifically calls out the frame pointer register (x29):
The frame pointer register (x29) must always address a valid frame
record. Some functions — such as leaf functions or tail calls — may
opt not to create an entry in this list As a result, stack traces
are always meaningful, even without debug information.
Other platforms are updated to not override the default.
This ends up disabling frame pointer elimination on aarch64_apple_darwin
which matches what clang does by default along with the
aarch64_apple_ios and x86_64_apple_darwin targets.
Further, the Apple docs "Writing ARM64 Code for Apple Platforms" has a section
called "Respect the Purpose of Specific CPU Registers" which
specifically calls out the frame pointer register (x29):
The frame pointer register (x29) must always address a valid frame
record. Some functions — such as leaf functions or tail calls — may
opt not to create an entry in this list As a result, stack traces
are always meaningful, even without debug information.
Other platforms are updated to not override the default.
CTFE core engine allocation & memory API improvemenets
This is a first step towards https://github.com/rust-lang/miri/issues/841.
- make `Allocation` API offset-based (no more making up `Pointer`s just to access an `Allocation`)
- make `Memory` API higher-level (combine checking for access and getting access into one operation)
The Miri-side PR is at https://github.com/rust-lang/miri/pull/1804.
r? `@oli-obk`
Only pass --[no-]gc-sections if linker is GNU ld.
Fixes a regression from #84468 where linking now fails with solaris linkers. LinkerFlavor::Gcc does not always mean GNU ld specifically. And in the case of at least the solaris ld in illumos, that flag is unrecognized and will cause the linking step to fail.
Even though removing the `is_like_solaris` branch from `gc_sections` in #84468 made sense as `-z ignore/record` are more analogous to the `--[no-]-as-needed` flags, it inadvertently caused solaris linkers to be passed the `--gc-sections` flag. So let's just change it to be more explicit about when we pass those flags.
Fix unused attributes on macro_rules.
The `unused_attributes` lint wasn't firing on attributes of `macro_rules` definitions. The consequence is that many attributes are silently ignored on `macro_rules`. The reason is that `unused_attributes` is a late-lint pass, and only has access to the HIR, which does not have macro_rules definitions.
My solution here is to change `non_exported_macro_attrs` to be `macro_attrs` (a list of all attributes used for `macro_rules`, instead of just those for `macro_export`), and then to check this list in the `unused_attributes` lint. There are a number of alternate approaches, but this seemed the most reliable and least invasive. I am open to completely different approaches, though.
One concern is that I don't fully understand the implications of extending `non_exported_macro_attrs` to include non-exported macros. That list was originally added in #62042 to handle stability attributes, so I suspect it was just an optimization since that was all that was needed. It was later extended to be included in SVH in #83901. #80641 also added a use to check for `invalid` attributes, which seems a little odd to me (it didn't validate non-exported macros, and seems highly specific).
Overall, there doesn't seem to be a clear story of when `unused_attributes` should be used versus an error like E0518. I considered alternatively using an "allow list" of built-in attributes that can be used on macro_rules (allow, warn, deny, forbid, cfg, cfg_attr, macro_export, deprecated, doc), but I feel like that could be a pain to maintain.
Some built-in attributes already present hard-errors when used with macro_rules. These are each hard-coded in various places:
- `derive`
- `test` and `bench`
- `proc_macro` and `proc_macro_derive`
- `inline`
- `global_allocator`
The primary motivation is that I sometimes see people use `#[macro_use]` in front of `macro_rules`, which indicates there is some confusion out there (evident that there was even a case of it in rustc).
Add default search path to `Target::search()`
The function `Target::search()` accepts a target triple and returns a `Target` struct defining the requested target.
There is a `// FIXME 16351: add a sane default search path?` comment that indicates it is desirable to include some sort of default. This was raised in https://github.com/rust-lang/rust/issues/16351 which was closed without any resolution.
https://github.com/rust-lang/rust/pull/31117 was proposed, however that has platform-specific logic that is unsuitable for systems without `/etc/`.
This patch implements the suggestion raised in https://github.com/rust-lang/rust/issues/16351#issuecomment-180878193 where a `target.json` file may be placed in `$(rustc --print sysroot)/lib/rustlib/<target-triple>/target.json`. This allows shipping a toolchain distribution as a single file that gets extracted to the sysroot.
rename LLVM target for RustyHermit
- RustyHermit is a library operating system, where the user-
and the kernel-space use the same target
- by a mistake a previous patch changes the target to an incorect value
- this merge request revert the previous changes
RustyHermit ist is a library operating system. In this case, we link a static library as kernel to the application. The final result is a bootable application. The library and the application have to use the same target. Currently, the targets are different (see also https://github.com/rust-lang/rust/blob/master/compiler/rustc_target/src/spec/x86_64_unknown_hermit.rs). Consequently, this commit change the LLVM target to 'hermit'.
This kernel spec is needed to disable the usage of FPU registers, which are not allowed in kernel space. In contrast to Linux, everything is running in ring 0 and also in the same address space.
Signed-off-by: Stefan Lankes <slankes@eonerc.rwth-aachen.de>
Under some conditions, the toolchain will produce a sequence of linker
arguments that result in a NEEDED list that puts libc before libgcc_s;
e.g.,
[0] NEEDED 0x2046ba libc.so.1
[1] NEEDED 0x204723 libm.so.2
[2] NEEDED 0x204736 libsocket.so.1
[3] NEEDED 0x20478b libumem.so.1
[4] NEEDED 0x204763 libgcc_s.so.1
Both libc and libgcc_s provide an unwinder implementation, but libgcc_s
provides some extra symbols upon which Rust directly depends. If libc
is first in the NEEDED list we will find some of those symbols in libc
but others in libgcc_s, resulting in undefined behaviour as the two
implementations do not use compatible interior data structures.
This solution is not perfect, but is the simplest way to produce correct
binaries on illumos for now.
Be stricter about rejecting LLVM reserved registers in asm!
LLVM will silently produce incorrect code if these registers are used as operands.
cc `@rust-lang/wg-inline-asm`
We had already reverted the change on stable back in PR #83412.
Since then, we've had some movement on issue #83139, but not a 100% fix.
But also since then, we had bug reported, issue #84667, that looks like outright
codegen breakage, rather than problems confined to debuginfo issues.
So we are reverting PR #77885 on stable and beta. We'll reland PR #77885 (or some
variant) switching back to an LLVM-dependent selection of out-of-line call vs
inline-asm, after these other issues have been resolved.
further split up const_fn feature flag
This continues the work on splitting up `const_fn` into separate feature flags:
* `const_fn_trait_bound` for `const fn` with trait bounds
* `const_fn_unsize` for unsizing coercions in `const fn` (looks like only `dyn` unsizing is still guarded here)
I don't know if there are even any things left that `const_fn` guards... at least libcore and liballoc do not need it any more.
`@oli-obk` are you currently able to do reviews?
This enables us to set more generic labels shared between targets. For
example `target_family="wasm"` across all targets that are conceptually
"wasm".
See https://github.com/rust-lang/reference/pull/1006
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
This commit adds an additional target property – `supported_sanitizers`,
and replaces the hardcoded allowlists in argument parsing to use this
new property.
Fixes#81802
rustc_target: Avoid unwraps when adding linker flags
These `unwrap`s assume that some linker flags were already added by `*_base::opts()` methods, but that's doesn't necessarily remain the case when we are reducing the number of flags hardcoded in targets, as https://github.com/rust-lang/rust/pull/83587 shows.
r? `@nagisa`
The frontend shouldn't be deciding whether or not to use mutable
noalias attributes, as this is a pure LLVM concern. Only provide
the necessary information and do the actual decision in
codegen_llvm.
Rollup of 9 pull requests
Successful merges:
- #81309 (always eagerly eval consts in Relate)
- #82217 (Edition-specific preludes)
- #82807 (rustdoc: Remove redundant enableSearchInput function)
- #82924 (WASI: Switch to crt1-command.o to enable support for new-style commands)
- #82949 (Do not attempt to unlock envlock in child process after a fork.)
- #82955 (fix: wrong word)
- #82962 (Treat header as first paragraph for shortened markdown descriptions)
- #82976 (fix error message for copy(_nonoverlapping) overflow)
- #82977 (Rename `Option::get_or_default` to `get_or_insert_default`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
WASI: Switch to crt1-command.o to enable support for new-style commands
This switches Rust's WASI target to use crt1-command.o instead of
crt1.o, which enables support for new-style commands. By default,
new-style commands work the same way as old-style commands, so nothing
immediately changes here, but this will be needed by later changes to
enable support for typed arguments.
See here for more information on new-style commands:
- https://github.com/WebAssembly/wasi-libc/pull/203
- https://reviews.llvm.org/D81689
r? ```@alexcrichton```
Implement RFC 2945: "C-unwind" ABI
## Implement RFC 2945: "C-unwind" ABI
This branch implements [RFC 2945]. The tracking issue for this RFC is #74990.
The feature gate for the issue is `#![feature(c_unwind)]`.
This RFC was created as part of the ffi-unwind project group tracked at rust-lang/lang-team#19.
### Changes
Further details will be provided in commit messages, but a high-level overview
of the changes follows:
* A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI boundaries is
acceptable. The cases where each of these variants' `unwind` member is true
correspond with the `C-unwind`, `system-unwind`, `stdcall-unwind`, and
`thiscall-unwind` ABI strings introduced in RFC 2945 [3].
* This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`, which
ensure that this feature gate works correctly for each of the new ABIs.
A new language features entry in the unstable book is added as well.
* We adjust the `rustc_middle::ty::layout::fn_can_unwind` function,
used to compute whether or not a `FnAbi` object represents a function that
should be able to unwind when `panic=unwind` is in use.
* Changes are also made to
`rustc_mir_build::build::should_abort_on_panic` so that the function ABI is
used to determind whether it should abort, assuming that the `panic=unwind`
strategy is being used, and no explicit unwind attribute was provided.
[RFC 2945]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
### Add debug assertion to check `AbiDatas` ordering
This makes a small alteration to `Abi::index`, so that we include a
debug assertion to check that the index we are returning corresponds
with the same abi in our data array.
This will help prevent ordering bugs in the future, which can
manifest in rather strange errors.
### Using exhaustive ABI matches
This slightly modifies the changes from our previous commits,
favoring exhaustive matches in place of `_ => ...` fall-through
arms.
This should help with maintenance in the future, when additional
ABI's are added, or when existing ABI's are modified.
### List all `-unwind` ABI's in unstable book
This updates the `c-unwind` page in the unstable book to list _all_
of the other ABI strings that are introduced by this feature gate.
Now, all of the ABI's specified by RFC 2945 are shown.
Co-authored-by: Amanieu d'Antras <amanieu@gmail.com>
Co-authored-by: Niko Matsakis <niko@alum.mit.edu>
### Overview
This commit begins the implementation work for RFC 2945. For more
information, see the rendered RFC [1] and tracking issue [2].
A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI
boundaries is acceptable. The cases where each of these variants'
`unwind` member is true correspond with the `C-unwind`,
`system-unwind`, `stdcall-unwind`, and `thiscall-unwind` ABI strings
introduced in RFC 2945 [3].
### Feature Gate and Unstable Book
This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`,
which ensure that this feature gate works correctly for each of the
new ABIs.
A new language features entry in the unstable book is added as well.
### Further Work To Be Done
This commit does not proceed to implement the new unwinding ABIs,
and is intentionally scoped specifically to *defining* the ABIs and
their feature flag.
### One Note on Test Churn
This will lead to some test churn, in re-blessing hash tests, as the
deleted comment in `src/librustc_target/spec/abi.rs` mentioned,
because we can no longer guarantee the ordering of the `Abi`
variants.
While this is a downside, this decision was made bearing in mind
that RFC 2945 states the following, in the "Other `unwind` Strings"
section [3]:
> More unwind variants of existing ABI strings may be introduced,
> with the same semantics, without an additional RFC.
Adding a new variant for each of these cases, rather than specifying
a payload for a given ABI, would quickly become untenable, and make
working with the `Abi` enum prone to mistakes.
This approach encodes the unwinding information *into* a given ABI,
to account for the future possibility of other `-unwind` ABI
strings.
### Ignore Directives
`ignore-*` directives are used in two of our `*-unwind` ABI test
cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and
`thiscall`, respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
This would otherwise fail on some targets, see:
fcf697f902
### Footnotes
[1]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
[2]: https://github.com/rust-lang/rust/issues/74990
[3]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md#other-unwind-abi-strings
This switches Rust's WASI target to use crt1-command.o instead of
crt1.o, which enables support for new-style commands. By default,
new-style commands work the same way as old-style commands, so nothing
immediately changes here, but this will be needed by later changes to
enable support for typed arguments.
See here for more information on new-style commands:
- https://github.com/WebAssembly/wasi-libc/pull/203
- https://reviews.llvm.org/D81689
Change built-in kernel targets to be os = none throughout
Whether for Rust's own `target_os`, LLVM's triples, or GNU config's, the
OS-related have fields have been for code running *on* that OS, not code
hat is *part* of the OS.
The difference is huge, as syscall interfaces are nothing like
freestanding interfaces. Kernels are (hypervisors and other more exotic
situations aside) freestanding programs that use the interfaces provided
by the hardware. It's *those* interfaces, the ones external to the
program being built and its software dependencies, that are the content
of the target.
For the Linux Kernel in particular, `target_env: "gnu"` is removed for
the same reason: that `-gnu` refers to glibc or GNU/linux, neither of
which applies to the kernel itself.
Relates to #74247
Upgrade to LLVM 12
This implements the necessary adjustments to make rustc work with LLVM 12. I didn't encounter any major issues so far.
r? `@cuviper`
Whether for Rust's own `target_os`, LLVM's triples, or GNU config's, the
OS-related have fields have been for code running *on* that OS, not code
that is *part* of the OS.
The difference is huge, as syscall interfaces are nothing like
freestanding interfaces. Kernels are (hypervisors and other more exotic
situations aside) freestanding programs that use the interfaces provided
by the hardware. It's *those* interfaces, the ones external to the
program being built and its software dependencies, that are the content
of the target.
For the Linux Kernel in particular, `target_env: "gnu"` is removed for
the same reason: that `-gnu` refers to glibc or GNU/linux, neither of
which applies to the kernel itself.
Relates to #74247
Thanks @ojeda for catching some things.
Fixed support for macOS Catalyst on ARM64
When I initially added Arm64 Catalyst support in https://github.com/rust-lang/rust/pull/77484 I had access to a DTK. However, while waiting to merge the PR some other changes were merged which caused conflicts in the branch. When fixing those conflicts I had no access to the DTK anymore and didn't try out if the resulting binaries did indeed work on Apple Silicon. I finally have a M1 and I realized that some small changes were necessary to support Apple Silicon. This PR adds the required changes. I've been running binaries generated with this branch for some time now and they work without issues.
The first argument to an x86-interrupt ABI function was implicitly
treated as byval prior to LLVM 12. Since LLVM 12, it has to be
marked as such explicitly: 2e0e03c6a0
Remove the x86_64-rumprun-netbsd target
Herein we remove the target from the compiler and the code from libstd intended to support the now-defunct rumprun project.
Closes#81514
Link crtbegin/crtend on musl to terminate .eh_frame
For some targets, rustc uses a "CRT fallback", where it links CRT
object files it ships instead of letting the host compiler link
them.
On musl, rustc currently links crt1, crti and crtn (provided by
libc), but does not link crtbegin and crtend (provided by libgcc).
In particular, crtend is responsible for terminating the .eh_frame
section. Lack of terminator may result in segfaults during
unwinding, as reported in #47551 and encountered by the LLVM 12
update in #81451.
This patch links crtbegin and crtend for musl as well, following
the table at the top of crt_objects.rs.
r? ``@nagisa``
For some targets, rustc uses a "CRT fallback", where it links CRT
object files it ships instead of letting the host compiler link
them.
On musl, rustc currently links crt1, crti and crtn (provided by
libc), but does not link crtbegin and crtend (provided by libgcc).
In particular, crtend is responsible for terminating the .eh_frame
section. Lack of terminator may result in segfaults during
unwinding, as reported in #47551 and encountered by the LLVM 12
update in #81451.
This patch links crtbegin and crtend for musl as well, following
the table at the top of crt_objects.rs.
add s390x-unknown-linux-musl target
This is the first step in bringup for Rust on s390x.
The libc and std crates need modifications as well, but getting this upstream makes that work easier.
Add new `rustc` target for Arm64 machines that can target the iphonesimulator
This PR lands a new target (`aarch64-apple-ios-sim`) that targets arm64 iphone simulator, previously unreachable from Apple Silicon machines.
resolves#81632
r? `@shepmaster`
LLVM picks the right things to put into the compiled object file based
on the target deployment version.
We need to communicate it through the target triple.
Only with that LLVM will use the right commands in the file to make it
look and behave like code compiled for the arm64 iOS simulator target.
Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
Add AArch64 big-endian and ILP32 targets
This PR adds 3 new AArch64 targets:
- `aarch64_be-unknown-linux-gnu`
- `aarch64-unknown-linux-gnu_ilp32`
- `aarch64_be-unknown-linux-gnu_ilp32`
It also fixes some ABI issues on big-endian ARM and AArch64.
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Don't link with --export-dynamic on wasm32-wasi
Remove --export-dynamic from the link arguments on the wasm32-wasi
target, as it emits spurious exports and increases code size.
Leave it in place for wasm32-unknown-unknown and
wasm32-unknown-emscripten. Even though it isn't a great solution
there, users are likely depending on its behavior there.
This seems right, given that conceptually bools are unsigned, but the
implications of this change may have more action at distance that I'm
not sure how to exhaustively consider.
For instance there are a number of cases where code attaches range
metadata if `scalar.is_bool()` holds. Supposedly it would no longer be
attached to the `repr(i8)` enums? Though I'm not sure why booleans are
being special-cased here in the first place...
Fixes#80556
Rollup of 10 pull requests
Successful merges:
- #79570 (rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`)
- #79819 (Add `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint)
- #79991 (rustdoc: Render HRTB correctly for bare functions)
- #80215 (Use -target when linking binaries for Mac Catalyst)
- #81158 (Point to span of upvar making closure FnMut)
- #81176 (Improve safety of `LateContext::qpath_res`)
- #81287 (Split rustdoc JSON types into separately versioned crate)
- #81306 (Fuse inner iterator in FlattenCompat and improve related tests)
- #81333 (clean up some const error reporting around promoteds)
- #81459 (Fix rustdoc text selection for page titles)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Target stack-probe support configurable finely
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version.
Note that this removes the ability to turn off the generation of the
stack-probe attribute. This is valid to replace it with inline-asm for all targets because
`probe-stack="inline-asm"` will not generate any machine code on targets
that do not currently support stack probes. This makes support for stack
probes on targets that don't have any right now automatic with LLVM
upgrades in the future.
(This is valid to do based on the fact that clang unconditionally sets
this attribute when `-fstack-clash-protection` is used, AFAICT)
cc #77885
r? `@cuviper`
Abi::ScalarPair is only ever used for types that don't have a stable
layout anyway so this doesn't break any FFI. It does however reduce the
amount of special casing on the abi outside of the code responsible for
abi specific adjustments to the pass mode.
Remove --export-dynamic from the link arguments on the wasm32-wasi
target, as it emits spurious exports and increases code size.
Leave it in place for wasm32-unknown-unknown and
wasm32-unknown-emscripten. Even though it isn't a great solution
there, users are likely depending on its behavior there.
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version on a per-target basis.
Added support for i386-unknown-linux-gnu and i486-unknown-linux-gnu
Support for both can be useful when creating new firmware, boot loaders,
or embedded operating systems.
Split a func into cold/hot parts, reducing binary size
I noticed that the Size::bits function is called in many places,
and is inlined into them. On x86_64-pc-windows-msvc, this function
is inlined 527 times, and compiled separately (non-inlined) 3 times.
Each of those inlined calls contains code that panics. This commit
moves the `panic!` call into a separate function and marks that
function with `#[cold]`.
This reduces binary size by 24 KB. Not much, but it's something.
Changes like this often reduce pressure on instruction-caches,
since it reduces the amount of code that is inlined into hot code
paths. Or more precisely, it removes cold code from hot cache lines.
Use correct ABI for wasm32 by default
Introduces `wasm32-unknown-bindgen` for those wishing to use the bindgen compat abi. `wasm32-*` now uses the correct abi by default.
Fixes https://github.com/rustwasm/team/issues/291
I noticed that the Size::bits function is called in many places,
and is inlined into them. On x86_64-pc-windows-msvc, this function
is inlined 527 times, and compiled separately (non-inlined) 3 times.
Each of those inlined calls contains code that panics. This commit
moves the `panic!` call into a separate function and marks that
function with `#[cold]`.
This reduces binary size by 24 KB. By itself, that's not a substantial
reduction. However, changes like this often reduce pressure on
instruction-caches, since it reduces the amount of code that is inlined
into hot code paths. Or more precisely, it removes cold code from hot
cache lines. It also removes all conditionals from Size::bits(),
which is called in many places.
Use Symbol for inline asm register class names
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
This is part of work I am doing to improve how Symbol interning works.
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
Add wasm32 support to inline asm
There is some contention around inline asm and wasm, and I really only made this to figure out the process of hacking on rustc, but I figured as long as the code existed, it was worth uploading.
cc `@Amanieu`
It is applied exactly when the return value has an indirect pass mode.
Except for InReg on x86 fastcall, arg attrs are now only used for
optimization purposes and thus are fine to ignore.
rustc_target: Mark UEFI targets as `is_like_windows`/`is_like_msvc`
And document what `is_like_windows` and `is_like_msvc` actually mean in more detail.
Addresses FIXMEs left from https://github.com/rust-lang/rust/pull/71030.
r? `@nagisa`
Add asm register information for SPIR-V
As discussed in [zulip](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Defining.20asm!.20for.20new.20architecture), we at [rust-gpu](https://github.com/EmbarkStudios/rust-gpu) would like to support `asm!` for our SPIR-V backend. However, we cannot do so purely without frontend support: [this match](d4ea0b3e46/compiler/rustc_target/src/asm/mod.rs (L185)) fails and so `asm!` is not supported ([error reported here](d4ea0b3e46/compiler/rustc_ast_lowering/src/expr.rs (L1095))). To resolve this, we need to stub out register information for SPIR-V to support getting the `asm!` content all the way to [`AsmBuilderMethods::codegen_inline_asm`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_codegen_ssa/traits/trait.AsmBuilderMethods.html#tymethod.codegen_inline_asm), at which point the rust-gpu backend can do all the parsing and codegen that is needed.
This is a pretty weird PR - adding support for a backend that isn't in-tree feels pretty gross to me, but I don't see an easy way around this. ``@Amanieu`` said I should submit it anyway, so, here we are! Let me know if this needs to go through a more formal process (MCP?) and what I should do to help this along.
I based this off the [wasm asm PR](https://github.com/rust-lang/rust/pull/78684), which unfortunately this PR conflicts with that one quite a bit, sorry for any merge conflict pain :(
---
Some open questions:
- What do we call the register class? Some context, SPIR-V is an SSA-based IR, there are "instructions" that create IDs (referred to as `<id>` in the spec), which can be referenced by other instructions. So, `reg` isn't exactly accurate, they're SSA IDs, not re-assignable registers.
- What happens when a SPIR-V register gets to the LLVM backend? Right now it's a `bug!`, but should that be a `sess.fatal()`? I'm not sure if it's even possible to reach that point, maybe there's a check that prevents the `spirv` target from even reaching that codepath.
Majority of targets use "unknown" vendor and changing it from "unknown" to omitted doesn't make sense.
From the LLVM docs (https://clang.llvm.org/docs/CrossCompilation.html#target-triple):
>Most of the time it can be omitted (and Unknown) will be assumed, which sets the defaults for the specified architecture.
>When a parameter is not important, it can be omitted, or you can choose unknown and the defaults will be used. If you choose a parameter that Clang doesn’t know, like blerg, it’ll ignore and assume unknown
rustc_target: Further cleanup use of target options
Follow up to https://github.com/rust-lang/rust/pull/77729.
Implements items 2 and 4 from the list in https://github.com/rust-lang/rust/pull/77729#issue-500228243.
The first commit collapses uses of `target.options.foo` into `target.foo`.
The second commit renames some target options to avoid tautology:
`target.target_endian` -> `target.endian`
`target.target_c_int_width` -> `target.c_int_width`
`target.target_os` -> `target.os`
`target.target_env` -> `target.env`
`target.target_vendor` -> `target.vendor`
`target.target_family` -> `target.os_family`
`target.target_mcount` -> `target.mcount`
r? `@Mark-Simulacrum`
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
Revert "Allow dynamic linking for iOS/tvOS targets."
This reverts PR #73516.
On macOS I compile static libs for iOS, automated using [cargo-mobile](https://github.com/BrainiumLLC/cargo-mobile), which has worked smoothly for the past 2 years. However, upon updating to Rust 1.46.0, I was no longer able to use Rust on iOS. I've bisected this to the PR referenced above.
For most projects tested, apps now immediately crash with a message like this:
```
dyld: Library not loaded: /Users/francesca/Projects/example/target/aarch64-apple-ios/debug/deps/libexample.dylib
Referenced from: /private/var/containers/Bundle/Application/745912AF-A928-465C-B340-872BD1C9F368/example.app/example
Reason: image not found
dyld: launch, loading dependent libraries
DYLD_LIBRARY_PATH=/usr/lib/system/introspection
DYLD_INSERT_LIBRARIES=/Developer/usr/lib/libBacktraceRecording.dylib:/Developer/usr/lib/libMainThreadChecker.dylib:/Developer/Library/PrivateFrameworks/DTDDISupport.framework/libViewDebuggerSupport.dylib:/Developer/Library/PrivateFrameworks/GPUTools.framework/libglInterpose.dylib:/usr/lib/libMTLCapture.dylib
```
This can be reproduced by using cargo-mobile to generate a winit example project, and then attempting to run it on an iOS device (`cargo mobile init && cargo apple open`).
In our projects that depend on DisplayLink, the build instead fails with a linker error:
```
= note: Undefined symbols for architecture arm64:
"_CACurrentMediaTime", referenced from:
display_link::ios::run_callback_ios10::hda81197ff46aedbd in libapp-4f0abc1d7684103f.rlib(app-4f0abc1d7684103f.40d4iro0yz1iy487.rcgu.o)
display_link::ios::run_callback_pre_ios10::h91f085da19374320 in libapp-4f0abc1d7684103f.rlib(app-4f0abc1d7684103f.40d4iro0yz1iy487.rcgu.o)
ld: symbol(s) not found for architecture arm64
```
After reverting the change to enable dynamic linking on iOS, everything works the same as it did on Rust 1.45.2 for me.
In the future, would it be possible for me to be pinged when iOS-related PRs are made? I work for a company that intends on using Rust on iOS in production, so I'd gladly provide testing.
cc @aspenluxxxy
