These aren't really used for anything any more, so there doesn't seem to be much
reason to leave them around in the `rt` directory. There was some limiting of
threads spawned or tests when run under valgrind, but very little is run under
valgrind nowadays so there's also no real use keeping these around.
This commit is an implementation of [RFC 1193][rfc] which adds the ability to
the compiler to cap the lint level for the entire compilation session. This flag
will ensure that no lints will go above this level, and Cargo will primarily use
this flag passing `--cap-lints allow` to all upstream dependencies.
[rfc]: https://github.com/rust-lang/rfcs/pull/1193Closes#27259
This commit is an implementation of [RFC 1193][rfc] which adds the ability to
the compiler to cap the lint level for the entire compilation session. This flag
will ensure that no lints will go above this level, and Cargo will primarily use
this flag passing `--cap-lints allow` to all upstream dependencies.
[rfc]: https://github.com/rust-lang/rfcs/pull/1193Closes#27259
`EmitterWriter::print_maybe_styled` was basically always used with `format!`, so this macro makes some code cleaner. It should also remove some unnecessary allocations (most `print_maybe_styled` invocations allocated a `String` previously, whereas the new macro uses `write_fmt` to write the formatted string directly to the terminal).
This probably could have been part of #26838, but it’s too late now. It’s also rebased on #26838’s branch because otherwise pretty much all of the changes in this PR would conflict with the other PR’s changes.
Add dropflag hints (stack-local booleans) for unfragmented paths in trans. Part of #5016.
Added code to maintain these hints at runtime, and to conditionalize drop-filling and calls to destructors.
In this early stage of my incremental implementation strategy, we are using hints, so we are always free to leave out a flag for a path -- then we just pass `None` as the dropflag hint in the corresponding schedule cleanup call. But, once a path has a hint, we must at least maintain it: i.e. if the hint exists, we must ensure it is never set to "moved" if the data in question might actually have been initialized. It remains sound to conservatively set the hint to "initialized" as long as the true drop-flag embedded in the value itself is up-to-date.
I hope the commit series has been broken up to be readable; most of the commits in the series should build (though I did not always check this).
----
Oh, I think this technically qualifies as a:
[breaking-change]
because it removes drop-filling in some cases where one could previously observe it. That should only affect `unsafe` code; no safe code should be able to inspect whether the drop-fill was present or not. For an example of code that needed to change to account for this, see commit a81c24ae0216ab47df59acd724f8a33124fb6d97 (a unit test of the `move_val_init` intrinsic). I have not encountered actual code that needed to be updated to account for the change, since this should only be skipping the drop-filling on *moved* values, not on dropped one, and so even types that use `unsafe_no_drop_flag` should be unchanged by this particular PR. (Their time will come later.)
Updated all call sites that used the other contructors to uniformly
call `Lvalue::new_with_hint`, passing along the appropriate kind
of hint for each context.
Placated tidy in a few other places in datum.rs.
Added code to maintain these hints at runtime, and to conditionalize
drop-filling and calls to destructors.
In this early stage, we are using hints, so we are always free to
leave out a flag for a path -- then we just pass `None` as the
dropflag hint in the corresponding schedule cleanup call. But, once a
path has a hint, we must at least maintain it: i.e. if the hint
exists, we must ensure it is never set to "moved" if the data in
question might actually have been initialized. It remains sound to
conservatively set the hint to "initialized" as long as the true
drop-flag embedded in the value itself is up-to-date.
----
Here are some high-level details I want to point out:
* We maintain the hint in Lvalue::post_store, marking the lvalue as
moved. (But also continue drop-filling if necessary.)
* We update the hint on ExprAssign.
* We pass along the hint in once closures that capture-by-move.
* You only call `drop_ty` for state that does not have an associated hint.
If you have a hint, you must call `drop_ty_core` instead.
(Originally I passed the hint into `drop_ty` as well, to make the
connection to a hint more apparent, but the vast majority of
current calls to `drop_ty` are in contexts where no hint is
available, so it just seemed like noise in the resulting diff.)
Instrumented calls sites that construct Lvalues to ease tracking down
cases that we might need to change whether or not they carry a hint.
Note that this commit does not do anything to actually *construct*
the `lldropflag_hints` map, nor does it change anything about codegen
itself. Those parts are in follow-on commits.
(already thumbs-upped pre-rebase by nikomatsakis)
The refactoring here is trivial because `trans::datum::Lvalue`
currently carries no payload. However, future commits will start
adding a payload to `Lvalue`, and thus will force us either
1. to thread the payload through the `_match` code (a long term goal), or
2. to ensure the payload has some reasonable default value.
I had to modify some tests : since `wtf8buf_show` and `wtf8_show` were doing the exact same thing, I repurposed `wtf8_show` to `wtf8buf_show_str` which ensures `Wtf8Buf` `Debug`-formats the same as `str`.
`write_str_escaped` might also be shared amongst other `fmt` but I just left it there within `Wtf8::fmt` for review.
Improve siphash performance for longer data
Use `ptr::copy_nonoverlapping` (aka memcpy) to load an u64 from the
byte stream. This is correct for any alignment, and the compiler will
use the appropriate instruction to load the data.
Also contains small tweaks that should benefit hashing short data too,
both the commit that removes a variable and the autovectorization of
the hash state initialization (in SipHash::reset).
Benchmarks show that hashing longer data benefits for the improved word loading.
Before (using benchmarks from the first commit in the PR):
The before benchmark is a bit noisy.
```
test hash::sip::bench_bytes_4 ... bench: 41 ns/iter (+/- 0) = 97 MB/s
test hash::sip::bench_bytes_7 ... bench: 49 ns/iter (+/- 2) = 142 MB/s
test hash::sip::bench_bytes_8 ... bench: 42 ns/iter (+/- 4) = 190 MB/s
test hash::sip::bench_bytes_a_16 ... bench: 57 ns/iter (+/- 14) = 280 MB/s
test hash::sip::bench_bytes_b_32 ... bench: 85 ns/iter (+/- 74) = 376 MB/s
test hash::sip::bench_bytes_c_128 ... bench: 278 ns/iter (+/- 33) = 460 MB/s
test hash::sip::bench_long_str ... bench: 825 ns/iter (+/- 103)
test hash::sip::bench_str_of_8_bytes ... bench: 151 ns/iter (+/- 66)
test hash::sip::bench_str_over_8_bytes ... bench: 59 ns/iter (+/- 3)
test hash::sip::bench_str_under_8_bytes ... bench: 47 ns/iter (+/- 56)
test hash::sip::bench_u32 ... bench: 39 ns/iter (+/- 93) = 205 MB/s
test hash::sip::bench_u32_keyed ... bench: 40 ns/iter (+/- 88) = 200 MB/s
test hash::sip::bench_u64 ... bench: 54 ns/iter (+/- 96) = 148 MB/s
```
After:
```
test hash::sip::bench_bytes_4 ... bench: 41 ns/iter (+/- 3) = 97 MB/s
test hash::sip::bench_bytes_7 ... bench: 48 ns/iter (+/- 0) = 145 MB/s
test hash::sip::bench_bytes_8 ... bench: 35 ns/iter (+/- 1) = 228 MB/s
test hash::sip::bench_bytes_a_16 ... bench: 45 ns/iter (+/- 1) = 355 MB/s
test hash::sip::bench_bytes_b_32 ... bench: 60 ns/iter (+/- 0) = 533 MB/s
test hash::sip::bench_bytes_c_128 ... bench: 161 ns/iter (+/- 5) = 795 MB/s
test hash::sip::bench_long_str ... bench: 514 ns/iter (+/- 5)
test hash::sip::bench_str_of_8_bytes ... bench: 44 ns/iter (+/- 0)
test hash::sip::bench_str_over_8_bytes ... bench: 51 ns/iter (+/- 0)
test hash::sip::bench_str_under_8_bytes ... bench: 52 ns/iter (+/- 6)
test hash::sip::bench_u32 ... bench: 40 ns/iter (+/- 2) = 200 MB/s
test hash::sip::bench_u32_keyed ... bench: 39 ns/iter (+/- 1) = 205 MB/s
test hash::sip::bench_u64 ... bench: 36 ns/iter (+/- 1) = 222 MB/s
```
Many of these have long since reached their stage of being obsolete, so this
commit starts the removal process for all of them. The unstable features that
were deprecated are:
* box_heap
* cmp_partial
* fs_time
* hash_default
* int_slice
* iter_min_max
* iter_reset_fuse
* iter_to_vec
* map_in_place
* move_from
* owned_ascii_ext
* page_size
* read_and_zero
* scan_state
* slice_chars
* slice_position_elem
* subslice_offset
Many of these have long since reached their stage of being obsolete, so this
commit starts the removal process for all of them. The unstable features that
were deprecated are:
* cmp_partial
* fs_time
* hash_default
* int_slice
* iter_min_max
* iter_reset_fuse
* iter_to_vec
* map_in_place
* move_from
* owned_ascii_ext
* page_size
* read_and_zero
* scan_state
* slice_chars
* slice_position_elem
* subslice_offset
Visual Studio 2015, recently released, includes the Universal CRT, a different
flavor than was provided before. The binaries and header files for this library
are included in new locations not previously known about by gcc-rs, and this
commit adds support for the necessary probing to find these.
Unfortunately there are no prior examples of this probing to be found in
frameworks like CMake or clang, so this is done is a bit of a sketchy method
today. It assumes that the installation is in a relatively standard format and
then blindly looks for the location of the UCRT. I'd love to switch this over to
using registry keys for probing, but I was currently unable to find such keys.
This should enable the compiler to work outside VS 2015 dev tools prompts.
These aren't really used for anything any more, so there doesn't seem to be much
reason to leave them around in the `rt` directory. There was some limiting of
threads spawned or tests when run under valgrind, but very little is run under
valgrind nowadays so there's also no real use keeping these around.
So I have tried to improve the rustbook engine:
- The sidebar now looks a lot more like gitbook (I thinks it cleaner)
- Added the Open Sans font, in my opinion more readable for prolonged periods of time
- Changed the style for code blocks a little
I encountered 1 problem. In `build.rs` I added this google font url (I commented out the non-relevant parts for clarity)
```rust
let rustdoc_args: &[String] = &[
//"".to_string(),
//preprocessed_path.display().to_string(),
//format!("-o{}", out_path.display()),
//format!("--html-before-content={}", prelude.display()),
//format!("--html-after-content={}", postlude.display()),
//format!("--markdown-playground-url=http://play.rust-lang.org"),
//format!("--markdown-css={}", item.path_to_root.join("rust-book.css").display()),
format!("--markdown-css=http://fonts.googleapis.com/css?family=Open+Sans:400italic,700italic,400,700"),
//"--markdown-no-toc".to_string(),
];
```
As you can see, I had to escape `=` with `=` because the string would get truncated if I didn't. Is that normal behaviour? Is that for security measures? If it is, isn't it a little weak if you can circumvent it by escaped characters? I don't know the reason behind, but I thought it was at least worth mentioning :)
Take your time for this PR, I still want to add multiple improvements:
- Like gitbook, possibility to change font by user
- Put `css` and `js` in their respective files (not hardcoded in rust)
- button to hide sidebar
- ...
So I'm not in a hurry to get this merged ;) But if you think it's good enough to be merged, go ahead. I will make another PR when I have other improvements.
In the image below is a screen of the improvements
This reverts commit a0efd3a3d9.
This commit caused a lot of unintended breakage for many Cargo builds. The problem is that Cargo compiles build scripts with `-C prefer-dynamic`, so the standard library is always dynamically linked and hence any imports need to be marked with `dllimport`. Dependencies of build scripts, however, were compiled as rlibs and did not have their imports tagged with `dllimport`, so build scripts would fail to link.
While known that this situation would break, it was unknown that it was a common scenario in the wild. As a result I'm just reverting these heuristics for now.
Instead of bar/baz, use valid/invalid as default methods. This
illustrates why you might want default methods, and shows that you can
call other trait methods from a default method.
r? @steveklabnik
