Dogfood {exclusive,half-open} ranges in compiler (nfc)
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
Iterate over the smaller list
If there are two lists of different sizes,
iterating over the smaller list and then
looking up in the larger list is cheaper
than vice versa, because lookups scale
sublinearly.
Move "mutable thing in const" check from interning to validity
This moves the check for mutable things (such as `UnsafeCell` or `&mut`) in a`const` from interning to validity. That means we can give more targeted error messages (pointing out *where* the problem lies), and we can simplify interning a bit.
Also fix the interning mode used for promoteds in statics.
r? @oli-obk
Suggest that expressions that look like const generic arguments should be enclosed in brackets
I pulled out the changes for const expressions from https://github.com/rust-lang/rust/pull/71592 (without the trait object diagnostic changes) and made some small changes; the implementation is `@estebank's.`
We're also going to want to make some changes separately to account for trait objects (they result in poor diagnostics, as is evident from one of the test cases here), such as an adaption of https://github.com/rust-lang/rust/pull/72273.
Fixes https://github.com/rust-lang/rust/issues/70753.
r? `@petrochenkov`
rustc_mir: track inlined callees in SourceScopeData.
We now record which MIR scopes are the roots of *other* (inlined) functions's scope trees, which allows us to generate the correct debuginfo in codegen, similar to what LLVM inlining generates.
This PR makes the `ui` test `backtrace-debuginfo` pass, if the MIR inliner is turned on by default.
Also, `#[track_caller]` is now correct in the face of MIR inlining (cc `@anp).`
Fixes#76997.
r? `@rust-lang/wg-mir-opt`
Tweak match arm semicolon removal suggestion to account for futures
* Tweak and extend "use `.await`" suggestions
* Suggest removal of semicolon on prior match arm
* Account for `impl Future` when suggesting semicolon removal
* Silence some errors when encountering `await foo()?` as can't be certain what the intent was
*Thanks to https://twitter.com/a_hoverbear/status/1318960787105353728 for pointing this out!*
Split out statement attributes changes from #78306
This is the same as PR https://github.com/rust-lang/rust/pull/78306, but `unused_doc_comments` is modified to explicitly ignore statement items (which preserves the current behavior).
This shouldn't have any user-visible effects, so it can be landed without lang team discussion.
---------
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
Compute proper module parent during resolution
Fixes#75982
The direct parent of a module may not be a module
(e.g. `const _: () = { #[path = "foo.rs"] mod foo; };`).
To find the parent of a module for purposes of resolution, we need to
walk up the tree until we hit a module or a crate root.
fix def collector for impl trait
fixes#77329
We now consistently make `impl Trait` a hir owner, requiring some special casing for synthetic generic params.
r? `@eddyb`
Rollup of 12 pull requests
Successful merges:
- #75115 (`#[deny(unsafe_op_in_unsafe_fn)]` in sys/cloudabi)
- #76614 (change the order of type arguments on ControlFlow)
- #77610 (revise Hermit's mutex interface to support the behaviour of StaticMutex)
- #77830 (Simplify query proc-macros)
- #77930 (Do not ICE with TraitPredicates containing [type error])
- #78069 (Fix const core::panic!(non_literal_str).)
- #78072 (Cleanup constant matching in exhaustiveness checking)
- #78119 (Throw core::panic!("message") as &str instead of String.)
- #78191 (Introduce a temporary for discriminant value in MatchBranchSimplification)
- #78272 (const_evaluatable_checked: deal with unused nodes + div)
- #78318 (TyCtxt: generate single impl block with `slice_interners` macro)
- #78327 (resolve: Relax macro resolution consistency check to account for any errors)
Failed merges:
r? `@ghost`
Simplify query proc-macros
The query code generation is split between proc-macros and regular macros in `rustc_middle::ty::query`.
This PR removes unused capabilities of the proc-macros, and tend to use regular macros for the logic.
Unconditionally capture tokens for attributes.
This allows us to avoid synthesizing tokens in `prepend_attr`, since we
have the original tokens available.
We still need to synthesize tokens when expanding `cfg_attr`,
but this is an unavoidable consequence of the syntax of `cfg_attr` -
the user does not supply the `#` and `[]` tokens that a `cfg_attr`
expands to.
This is based on PR https://github.com/rust-lang/rust/pull/77250 - this PR exposes a bug in the current `collect_tokens` implementation, which is fixed by the rewrite.
Fixes#75982
The direct parent of a module may not be a module
(e.g. `const _: () = { #[path = "foo.rs"] mod foo; };`).
To find the parent of a module for purposes of resolution, we need to
walk up the tree until we hit a module or a crate root.
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
If there are two lists of different sizes,
iterating over the smaller list and then
looking up in the larger list is cheaper
than vice versa, because lookups scale
sublinearly.
move `visit_predicate` into `TypeVisitor`
Seems easier than dealing with `PredicateVisitor` for me which I needed for object safety checks for `PredicateAtom::ConstEvaluatable`. Is there a reason I am missing for this split?
r? @matthewjasper
improve const infer error
For type inference we probably have to be careful about subtyping and stuff but considering that subtyping shouldn't be relevant for constants I don't really see a reason why we may not want to reuse the const origin here.
r? `@varkor`
Clean up and improve some docs
* compiler docs
* Don't format list as part of a code block
* Clean up some other formatting
* rustdoc book
* Update CommonMark spec version to latest (0.28 -> 0.29)
* Clean up some various wording and formatting
Fix trait solving ICEs
- Selection candidates that are known to be applicable are preferred
over candidates that are not.
- Don't ICE if a projection/object candidate is no longer applicable
(this can happen due to cycles in normalization)
- Normalize supertraits when finding trait object candidates
Closes#77653Closes#77656
r? `@nikomatsakis`
Make fewer types generic over QueryContext
While trying to refactor `rustc_query_system::query::QueryContext` to make it dyn-safe, I noticed some smaller things:
* QueryConfig doesn't need to be generic over QueryContext
* ~~The `kind` field on QueryJobId is unused~~
* Some unnecessary where clauses
* Many types in `job.rs` where generic over `QueryContext` but only needed `QueryContext::Query`.
If handle_cycle_error() could be refactored to not take `error: CycleError<CTX::Query>`, all those bounds could be removed as well.
Changing `find_cycle_in_stack()` in job.rs to not take a `tcx` argument is the only functional change here. Everything else is just updating type signatures. (aka compile-error driven development ^^)
~~Currently there is a weird bug where memory usage suddenly skyrockets when running UI tests. I'll investigate that tomorrow.
A perf run probably won't make sense before that is fixed.~~
EDIT: `kind` actually is used by `Eq`, and re-adding it fixed the memory issue.
* compiler docs
* Don't format list as part of a code block
* Clean up some other formatting
* rustdoc book
* Update CommonMark spec version to latest (0.28 -> 0.29)
* Clean up some various wording and formatting
This allows us to avoid synthesizing tokens in `prepend_attr`, since we
have the original tokens available.
We still need to synthesize tokens when expanding `cfg_attr`,
but this is an unavoidable consequence of the syntax of `cfg_attr` -
the user does not supply the `#` and `[]` tokens that a `cfg_attr`
expands to.
Calculate visibilities once in resolve
Then use them through a query based on resolver outputs.
Item visibilities were previously calculated in three places - initially in `rustc_resolve`, then in `rustc_privacy` during type privacy checkin, and then in `rustc_metadata` during metadata encoding.
The visibility logic is not entirely trivial, especially for things like constructors or enum variants, and all of it was duplicated.
This PR deduplicates all the visibility calculations, visibilities are determined once during early name resolution and then stored in `ResolverOutputs` and are later available through `tcx` as a query `tcx.visibility(def_id)`.
(This query existed previously, but only worked for other crates.)
Some special cases (e.g. visibilities for closure types, which are needed for type privacy checking) are not processed in resolve, but deferred and performed directly in the query instead.
Improve `skip_binder` usage during FlagComputation
It looks like there was previously a bug around `ExistentialPredicate::Projection` here, don't know how to best trigger that one to add a regression test though.
Use rebind instead of Binder::bind when possible
These are really only the easy places. I just searched for `Binder::bind` and replaced where it straightforward.
r? `@lcnr`
cc. `@nikomatsakis`
Permit uninhabited enums to cast into ints
This essentially reverts part of #6204; it is unclear why that [commit](c0f587de34) was introduced, and I suspect no one remembers.
The changed code was only called from casting checks and appears to not affect any callers of that code (other than permitting this one case).
Fixes#75647.
mangling: mangle impl params w/ v0 scheme
This PR modifies v0 symbol mangling to include all generic parameters from impl blocks (not just those used in the self type) - an alternative fix to #75326.
```
original:
_RNCNvXCs4fqI2P2rA04_19impl_param_manglingINtB4_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4next0B4_
// |------------ B4_ ----------------|
// _R (N C (N v (X (C ((s 4fqI2p2rA04_) 19impl_param_mangling)) (I (N t B4_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) 0) B4_
modified:
_RNvXINICs4fqI2P2rA04_11issue_753260pppEINtB5_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4nextB5_
// _R (N v (X (I (N I (C ((s 4fqI2P2rA04_) 11issue_75326)) 0) ppp E) (I (N t B5_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) B5_
// | ^ |
// | | |
// | new impl namespace |
```
~~Submitted as a draft as after some discussion w/ @eddyb, I'm going to do some investigation into (yet more alternative) changes to polymorphization that might remove the necessity for this.~~
r? @eddyb
This commit adjust `#[rustc_symbol_name]` so that it can be applied to
non-monomorphic functions without producing an ICE.
Signed-off-by: David Wood <david@davidtw.co>
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
Replace tuple of infer vars for upvar_tys with single infer var
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
closes https://github.com/rust-lang/project-rfc-2229/issues/4
r? `@nikomatsakis`
Replace absolute paths with relative ones
Modern compilers allow reaching external crates
like std or core via relative paths in modules
outside of lib.rs and main.rs.
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Jenny Wills <wills.jenniferg@gmail.com>
Allow generic parameters in intra-doc links
Fixes#62834.
---
The contents of the generics will be mostly ignored (except for warning
if fully-qualified syntax is used, which is currently unsupported in
intra-doc links - see issue #74563).
* Allow links like `Vec<T>`, `Result<T, E>`, and `Option<Box<T>>`
* Allow links like `Vec::<T>::new()`
* Warn on
* Unbalanced angle brackets (e.g. `Vec<T` or `Vec<T>>`)
* Missing type to apply generics to (`<T>` or `<Box<T>>`)
* Use of fully-qualified syntax (`<Vec as IntoIterator>::into_iter`)
* Invalid path separator (`Vec:<T>:new`)
* Too many angle brackets (`Vec<<T>>`)
* Empty angle brackets (`Vec<>`)
Note that this implementation *does* allow some constructs that aren't
valid in the actual Rust syntax, for example `Box::<T>new()`. That may
not be supported in rustdoc in the future; it is an implementation
detail.
They were not formatted correctly, so rustdoc was interpreting some
parts as code. Also cleaned up some other query docs that weren't
causing issues, but were formatted incorrectly.
Add TraitDef::find_map_relevant_impl
This PR adds a method to `TraitDef`. While `for_each_relevant_impl` covers the general use case, sometimes it's not necessary to scan through all the relevant implementations, so this PR introduces a new method, `find_map_relevant_impl`. I've also replaced the `for_each_relevant_impl` calls where possible.
I'm hoping for a tiny bit of efficiency gain here and there.
Implementation of RFC2867
https://github.com/rust-lang/rust/issues/74727
So I've started work on this, I think my next steps are to make use of the `instruction_set` value in the llvm codegen but this is the point where I begin to get a bit lost. I'm looking at the code but it would be nice to have some guidance on what I've currently done and what I'm doing next 😄
Bounds of the form `type Future: Future<Result=Self::Result>` exist in
some ecosystem crates. To validate these bounds for trait objects we
need to normalize `Self::Result` in a way that doesn't cause a cycle.
Record `expansion_that_defined` into crate metadata
Fixes#77523
Now that hygiene serialization is implemented, we also need to record
`expansion_that_defined` so that we properly handle a foreign
`SyntaxContext`.
Reduce boilerplate with the matches! macro
Replaces simple bool `match`es of the form
match $expr {
$pattern => true
_ => false
}
and their inverse with invocations of the matches! macro.
Limited to rustc_middle for now to get my feet wet.
Fixes#77523
Now that hygiene serialization is implemented, we also need to record
`expansion_that_defined` so that we properly handle a foreign
`SyntaxContext`.
This is a combination of 18 commits.
Commit #2:
Additional examples and some small improvements.
Commit #3:
fixed mir-opt non-mir extensions and spanview title elements
Corrected a fairly recent assumption in runtest.rs that all MIR dump
files end in .mir. (It was appending .mir to the graphviz .dot and
spanview .html file names when generating blessed output files. That
also left outdated files in the baseline alongside the files with the
incorrect names, which I've now removed.)
Updated spanview HTML title elements to match their content, replacing a
hardcoded and incorrect name that was left in accidentally when
originally submitted.
Commit #4:
added more test examples
also improved Makefiles with support for non-zero exit status and to
force validation of tests unless a specific test overrides it with a
specific comment.
Commit #5:
Fixed rare issues after testing on real-world crate
Commit #6:
Addressed PR feedback, and removed temporary -Zexperimental-coverage
-Zinstrument-coverage once again supports the latest capabilities of
LLVM instrprof coverage instrumentation.
Also fixed a bug in spanview.
Commit #7:
Fix closure handling, add tests for closures and inner items
And cleaned up other tests for consistency, and to make it more clear
where spans start/end by breaking up lines.
Commit #8:
renamed "typical" test results "expected"
Now that the `llvm-cov show` tests are improved to normally expect
matching actuals, and to allow individual tests to override that
expectation.
Commit #9:
test coverage of inline generic struct function
Commit #10:
Addressed review feedback
* Removed unnecessary Unreachable filter.
* Replaced a match wildcard with remining variants.
* Added more comments to help clarify the role of successors() in the
CFG traversal
Commit #11:
refactoring based on feedback
* refactored `fn coverage_spans()`.
* changed the way I expand an empty coverage span to improve performance
* fixed a typo that I had accidently left in, in visit.rs
Commit #12:
Optimized use of SourceMap and SourceFile
Commit #13:
Fixed a regression, and synched with upstream
Some generated test file names changed due to some new change upstream.
Commit #14:
Stripping out crate disambiguators from demangled names
These can vary depending on the test platform.
Commit #15:
Ignore llvm-cov show diff on test with generics, expand IO error message
Tests with generics produce llvm-cov show results with demangled names
that can include an unstable "crate disambiguator" (hex value). The
value changes when run in the Rust CI Windows environment. I added a sed
filter to strip them out (in a prior commit), but sed also appears to
fail in the same environment. Until I can figure out a workaround, I'm
just going to ignore this specific test result. I added a FIXME to
follow up later, but it's not that critical.
I also saw an error with Windows GNU, but the IO error did not
specify a path for the directory or file that triggered the error. I
updated the error messages to provide more info for next, time but also
noticed some other tests with similar steps did not fail. Looks
spurious.
Commit #16:
Modify rust-demangler to strip disambiguators by default
Commit #17:
Remove std::process::exit from coverage tests
Due to Issue #77553, programs that call std::process::exit() do not
generate coverage results on Windows MSVC.
Commit #18:
fix: test file paths exceeding Windows max path len
Overhaul const-checking diagnostics
The primary purpose of this PR was to remove `NonConstOp::STOPS_CONST_CHECKING`, which causes any additional errors found by the const-checker to be silenced. I used this flag to preserve diagnostic parity with `qualify_min_const_fn.rs`, which has since been removed.
However, simply removing the flag caused a deluge of errors in some cases, since an error would be emitted any time a local or temporary had a wrong type. To remedy this, I added an alternative system (`DiagnosticImportance`) to silence additional error messages that were likely to distract the user from the underlying issue. When an error of the highest importance occurs, all less important errors are silenced. When no error of the highest importance occurs, all less important errors are emitted after checking is complete. Following the suggestions from the important error is usually enough to fix the less important errors, so this should lead to better UX most of the time.
There's also some unrelated diagnostics improvements in this PR isolated in their own commits. Splitting them out would be possible, but a bit of a pain. This isn't as tidy as some of my other PRs, but it should *only* affect diagnostics, never whether or not something passes const-checking. Note that there are a few trivial exceptions to this, like banning `Yield` in all const-contexts, not just `const fn`.
As always, meant to be reviewed commit-by-commit.
r? `@oli-obk`
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Optimize `IntRange::from_pat`, then shrink `ParamEnv`
Resolves#77058.
r? `@Mark-Simulacrum`
cc `@vandenheuvel`
Looking at the output of `perf report` for #76244, the hot instructions seemed to be around the call to `pat_constructor` in `IntRange::from_pat`. I carried out an obvious optimization, but it actually made the instruction count higher (see #77075). However, it seems to have mitigated whatever was causing the pipeline stalls, so when combined with #76244, it's a net win.
As you can see below, the regression in #76244 seems to have originated from something measured by `stalled-cycles-backend`. I'll try to collect some finer-grained stats to see if I can isolate it. I wish I had a better idea of what was going on here. I'd like to prevent the regression from reappearing in the future due to small changes in unrelated code.
<details>
<summary>Current `master`:</summary>
```
Performance counter stats for 'cargo +baseline-stage1 check':
2,275.67 msec task-clock:u # 0.998 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,826 page-faults:u # 0.022 M/sec
5,117,221,678 cycles:u # 2.249 GHz
299,655,943 stalled-cycles-frontend:u # 5.86% frontend cycles idle
2,284,213,395 stalled-cycles-backend:u # 44.64% backend cycles idle
8,051,871,959 instructions:u # 1.57 insn per cycle
# 0.28 stalled cycles per insn
1,359,589,402 branches:u # 597.447 M/sec
7,359,347 branch-misses:u # 0.54% of all branches
2.281030026 seconds time elapsed
2.108197000 seconds user
0.164183000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` without changing `IntRange::from_pat`:</summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,751.79 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
50,103 page-faults:u # 0.018 M/sec
6,260,590,019 cycles:u # 2.275 GHz
317,355,920 stalled-cycles-frontend:u # 5.07% frontend cycles idle
3,397,743,582 stalled-cycles-backend:u # 54.27% backend cycles idle
8,276,224,367 instructions:u # 1.32 insn per cycle
# 0.41 stalled cycles per insn
1,370,453,386 branches:u # 498.023 M/sec
7,281,031 branch-misses:u # 0.53% of all branches
2.763265838 seconds time elapsed
2.544578000 seconds user
0.204548000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` and change `IntRange::from_pat`: </summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,295.57 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,959 page-faults:u # 0.022 M/sec
5,151,407,066 cycles:u # 2.244 GHz
324,517,829 stalled-cycles-frontend:u # 6.30% frontend cycles idle
2,301,671,001 stalled-cycles-backend:u # 44.68% backend cycles idle
8,130,868,329 instructions:u # 1.58 insn per cycle
# 0.28 stalled cycles per insn
1,356,618,512 branches:u # 590.972 M/sec
7,323,800 branch-misses:u # 0.54% of all branches
2.304509653 seconds time elapsed
2.128090000 seconds user
0.163909000 seconds sys
```
</details>
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
diag: improve closure/generic parameter mismatch
Fixes#51154.
This PR improves the diagnostic when a type parameter is expected and a closure is found, noting that each closure has a distinct type and therefore could not always match the caller-chosen type of the parameter.
r? @estebank
This was a hack to work around the lack of an escape hatch for the "min
`const fn`" checks in const-stable functions. Now that we have co-opted
`allow_internal_unstable` for this purpose, we no longer need the
bespoke attribute.
Return values up to 128 bits in registers
This fixes https://github.com/rust-lang/rust/issues/26494#issuecomment-619506345 by making Rust's default ABI pass return values up to 128 bits in size in registers, just like the System V ABI.
The result is that these methods from the comment linked above now generate the same code, making the Rust ABI as efficient as the `"C"` ABI:
```rust
pub struct Stats { x: u32, y: u32, z: u32, }
pub extern "C" fn sum_c(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
pub fn sum_rust(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
```
```asm
sum_rust:
movl (%rsi), %eax
addl (%rdi), %eax
movl 4(%rsi), %ecx
addl 4(%rdi), %ecx
movl 8(%rsi), %edx
addl 8(%rdi), %edx
shlq $32, %rcx
orq %rcx, %rax
retq
```
Ignore ZST offsets when deciding whether to use Scalar/ScalarPair layout
This is important because Scalar/ScalarPair layout previously would not be used if any ZST had nonzero offset.
For example, before this change, only `((), u128)` would be laid out like `u128`, not `(u128, ())`.
Fixes#63244
emit errors during AbstractConst building
There changes are currently still untested, so I don't expect this to pass CI 😆
It seems to me like this is the direction we want to go in, though we didn't have too much of a discussion about this.
r? @oli-obk
use if let instead of single match arm expressions
use if let instead of single match arm expressions to compact code and reduce nesting (clippy::single_match)
Rollup of 15 pull requests
Successful merges:
- #76722 (Test and fix Send and Sync traits of BTreeMap artefacts)
- #76766 (Extract some intrinsics out of rustc_codegen_llvm)
- #76800 (Don't generate bootstrap usage unless it's needed)
- #76809 (simplfy condition in ItemLowerer::with_trait_impl_ref())
- #76815 (Fix wording in mir doc)
- #76818 (Don't compile regex at every function call.)
- #76821 (Remove redundant nightly features)
- #76823 (black_box: silence unused_mut warning when building with cfg(miri))
- #76825 (use `array_windows` instead of `windows` in the compiler)
- #76827 (fix array_windows docs)
- #76828 (use strip_prefix over starts_with and manual slicing based on pattern length (clippy::manual_strip))
- #76840 (Move to intra doc links in core/src/future)
- #76845 (Use intra docs links in core::{ascii, option, str, pattern, hash::map})
- #76853 (Use intra-doc links in library/core/src/task/wake.rs)
- #76871 (support panic=abort in Miri)
Failed merges:
r? `@ghost`
use `array_windows` instead of `windows` in the compiler
I do think these changes are beautiful, but do have to admit that using type inference for the window length
can easily be confusing. This seems like a general issue with const generics, where inferring constants adds an additional
complexity which users have to learn and keep in mind.
Remove redundant nightly features
Removes a bunch of redundant/outdated nightly features. The first commit removes a `core_intrinsics` use for which a stable wrapper has been provided since. The second commit replaces the `const_generics` feature with `min_const_generics` which might get stabilized this year. The third commit is the result of a trial/error run of removing every single feature and then adding it back if compile failed. A bunch of unused features are the result that the third commit removes.
Validate constants during `const_eval_raw`
This PR implements the groundwork for https://github.com/rust-lang/rust/issues/72396
* constants are now validated during `const_eval_raw`
* to prevent cycle errors, we do not validate references to statics anymore beyond the fact that they are not dangling
* the `const_eval` query ICEs if used on `static` items
* as a side effect promoteds are now evaluated to `ConstValue::Scalar` again (since they are just a reference to the actual promoted allocation in most cases).
shim: monomorphic `FnPtrShim`s during construction
Fixes#69925.
This PR adjusts MIR shim construction so that substitutions are applied to function pointer shims during construction, rather than during codegen (as determined by `substs_for_mir_body`).
r? `@eddyb`
