type is too big -> values of the type are too big
strictly speaking, `[u8; usize::MAX]` or even `[[[u128; usize::MAX]; usize::MAX]; usize::MAX]` are absolutely fine types as long as you don't try to deal with any values of it.
This error message seems to cause some confusion imo, for example in https://github.com/rust-lang/rust/pull/79135#issuecomment-729361380 so I would prefer us to be more precise here.
See the added test case which uses one of these types without causing an error.
r? ``@oli-obk``
Introduce `TypeVisitor::BreakTy`
Implements MCP rust-lang/compiler-team#383.
r? `@ghost`
cc `@lcnr` `@oli-obk`
~~Blocked on FCP in rust-lang/compiler-team#383.~~
RFC-2229: Implement Precise Capture Analysis
### This PR introduces
- Feature gate for RFC-2229 (incomplete) `capture_disjoint_field`
- Rustc Attribute to print out the capture analysis `rustc_capture_analysis`
- Precise capture analysis
### Description of the analysis
1. If the feature gate is not set then all variables that are not local to the closure will be added to the list of captures. (This is for backcompat)
2. The rest of the analysis is based entirely on how the captured `Place`s are used within the closure. Precise information (i.e. projections) about the `Place` is maintained throughout.
3. To reduce the amount of information we need to keep track of, we do a minimization step. In this step, we determine a list such that no Place within this list represents an ancestor path to another entry in the list. Check rust-lang/project-rfc-2229#9 for more detailed examples.
4. To keep the compiler functional as before we implement a Bridge between the results of this new analysis to existing data structures used for closure captures. Note the new capture analysis results are only part of MaybeTypeckTables that is the information is only available during typeck-ing.
### Known issues
- Statements like `let _ = x` will make the compiler ICE when used within a closure with the feature enabled. More generally speaking the issue is caused by `let` statements that create no bindings and are init'ed using a Place expression.
### Testing
We removed the code that would handle the case where the feature gate is not set, to enable the feature as default and did a bors try and perf run. More information here: #78762
### Thanks
This has been slowly in the works for a while now.
I want to call out `@Azhng` `@ChrisPardy` `@null-sleep` `@jenniferwills` `@logmosier` `@roxelo` for working on this and the previous PRs that led up to this, `@nikomatsakis` for guiding us.
Closesrust-lang/project-rfc-2229#7Closesrust-lang/project-rfc-2229#9Closesrust-lang/project-rfc-2229#6Closesrust-lang/project-rfc-2229#19
r? `@nikomatsakis`
add error_occured field to ConstQualifs,
fix#76064
I wasn't sure what `in_return_place` actually did and not sure why it returns `ConstQualifs` while it's sibling functions return `bool`. So I tried to make as minimal changes to the structure as possible. Please point out whether I have to refactor it or not.
r? `@oli-obk`
cc `@RalfJung`
Add type to `ConstKind::Placeholder`
I simply threaded `<'tcx>` through everything that required it. I'm not sure whether this is the correct thing to do, but it seems to work.
r? `@nikomatsakis`
Do not collect tokens for doc comments
Doc comment is a single token and AST has all the information to re-create it precisely.
Doc comments are also responsible for majority of calls to `collect_tokens` (with `num_calls == 1` and `num_calls == 0`, cc https://github.com/rust-lang/rust/pull/78736).
(I also moved token collection into `fn parse_attribute` to deduplicate code a bit.)
r? `@Aaron1011`
rustc_target: Further cleanup use of target options
Follow up to https://github.com/rust-lang/rust/pull/77729.
Implements items 2 and 4 from the list in https://github.com/rust-lang/rust/pull/77729#issue-500228243.
The first commit collapses uses of `target.options.foo` into `target.foo`.
The second commit renames some target options to avoid tautology:
`target.target_endian` -> `target.endian`
`target.target_c_int_width` -> `target.c_int_width`
`target.target_os` -> `target.os`
`target.target_env` -> `target.env`
`target.target_vendor` -> `target.vendor`
`target.target_family` -> `target.os_family`
`target.target_mcount` -> `target.mcount`
r? `@Mark-Simulacrum`
inliner: Use substs_for_mir_body
Changes from 68965 extended the kind of instances that are being
inlined. For some of those, the `instance_mir` returns a MIR body that
is already expressed in terms of the types found in substitution array,
and doesn't need further substitution.
Use `substs_for_mir_body` to take that into account.
Resolves#78529.
Resolves#78560.
Fix handling of item names for HIR
- Handle variants, fields, macros in `Node::ident()`
- Handle the crate root in `opt_item_name`
- Rewrite `item_name` in terms of `opt_item_name`
I need this for both https://github.com/rust-lang/rust/pull/77820 and https://github.com/rust-lang/rust/pull/78082, so splitting it out into a separate PR so it can land early.
Refactor IntErrorKind to avoid "underflow" terminology
This PR is a continuation of #76455
# Changes
- `Overflow` renamed to `PosOverflow` and `Underflow` renamed to `NegOverflow` after discussion in #76455
- Changed some of the parsing code to return `InvalidDigit` rather than `Empty` for strings "+" and "-". https://users.rust-lang.org/t/misleading-error-in-str-parse-for-int-types/49178
- Carry the problem `char` with the `InvalidDigit` variant.
- Necessary changes were made to the compiler as it depends on `int_error_matching`.
- Redid tests to match on specific errors.
r? ```@KodrAus```
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
This PR allows using `#[repr(simd)]` on ADTs containing a
single array field:
```rust
#[repr(simd)] struct S0([f32; 4]);
#[repr(simd)] struct S1<const N: usize>([f32; N]);
#[repr(simd)] struct S2<T, const N: usize>([T; N]);
```
This should allow experimenting with portable packed SIMD
abstractions on nightly that make use of const generics.
- Handle variants, fields, macros in `Node::ident()`
- Handle the crate root in `opt_item_name`
- Factor out `item_name_from_def_id` to reduce duplication
- Look at HIR before the DefId for `opt_item_name`
This gives accurate spans, which are not available from serialized
metadata.
- Don't panic on the crate root in `opt_item_name`
- Add comments
Working expression optimization, and some improvements to branch-level source coverage
This replaces PR #78040 after reorganizing the original commits (by request) into a more logical sequence of major changes.
Most of the work is in the MIR `transform/coverage/` directory (originally, `transform/instrument_coverage.rs`).
Note this PR includes some significant additional debugging capabilities, to help myself and any future developer working on coverage improvements or issues.
In particular, there's a new Graphviz (.dot file) output for the coverage graph (the `BasicCoverageBlock` control flow graph) that provides ways to get some very good insight into the relationships between the MIR, the coverage graph BCBs, coverage spans, and counters. (There are also some cool debugging options, available via environment variable, to alter how some data in the graph appears.)
And the code for this Graphviz view is actually generic... it can be used by any implementation of the Rust `Graph` traits.
Finally (for now), I also now output information from `llvm-cov` that shows the actual counters and spans it found in the coverage map, and their counts (from the `--debug` flag). I found this to be enormously helpful in debugging some coverage issues, so I kept it in the test results as well for additional context.
`@tmandry` `@wesleywiser`
r? `@tmandry`
Here's an example of the new coverage graph:
* Within each `BasicCoverageBlock` (BCB), you can see each `CoverageSpan` and its contributing statements (MIR `Statement`s and/or `Terminator`s)
* Each `CoverageSpan` has a `Counter` or and `Expression`, and `Expression`s show their Add/Subtract operation with nested operations. (This can be changed to show the Counter and Expression IDs instead, or in addition to, the BCB.)
* The terminators of all MIR `BasicBlock`s in the BCB, including one final `Terminator`
* If an "edge counter" is required (because we need to count an edge between blocks, in some cases) the edge's Counter or Expression is shown next to its label. (Not shown in the example below.) (FYI, Edge Counters are converted into a new MIR `BasicBlock` with `Goto`)
<img width="1116" alt="Screen Shot 2020-10-17 at 12 23 29 AM" src="https://user-images.githubusercontent.com/3827298/96331095-616cb480-100f-11eb-8212-60f2d433e2d8.png">
r? `@tmandry`
FYI: `@wesleywiser`
Changes from 68965 extended the kind of instances that are being
inlined. For some of those, the `instance_mir` returns a MIR body that
is already expressed in terms of the types found in substitution array,
and doesn't need further substitution.
Use `substs_for_mir_body` to take that into account.
Properly handle lint spans after MIR inlining
The first commit shows what happens when we apply mir inlining and then cause lints on the inlined MIR.
The second commit fixes that.
r? `@wesleywiser`
foreign_modules query hash table lookups
When compiling a large monolithic crate we're seeing huge times in the `foreign_modules` query due to repeated iteration over foreign modules (in order to find a module by its id). This implements hash table lookups so that which massively reduces time spent in that query in this particular case. We'll need to see if the overhead of creating the hash table has a negative impact on performance in more normal compilation scenarios.
I'm working with `@wesleywiser` on this.
Fixes#78660
With PR https://github.com/rust-lang/rust/pull/75534 merged, we now run
more lint-related code for future-incompat-report, even when their final
level is Allow. Some lint-related code was not expecting `Level::Allow`,
and had an explicit panic.
This PR explicitly tracks the lint level set on the command line before
`--cap-lints` is applied. This is used to emit a more precise error
note (e.g. we don't say that `-W lint-name` was specified on the
command line just because a lint was capped to Warn). As a result, we
can now correctly emit a note that `-A` was used if we got
`Level::Allow` from the command line (before the cap is applied).
Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
Dogfood {exclusive,half-open} ranges in compiler (nfc)
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
Iterate over the smaller list
If there are two lists of different sizes,
iterating over the smaller list and then
looking up in the larger list is cheaper
than vice versa, because lookups scale
sublinearly.
Move "mutable thing in const" check from interning to validity
This moves the check for mutable things (such as `UnsafeCell` or `&mut`) in a`const` from interning to validity. That means we can give more targeted error messages (pointing out *where* the problem lies), and we can simplify interning a bit.
Also fix the interning mode used for promoteds in statics.
r? @oli-obk
Suggest that expressions that look like const generic arguments should be enclosed in brackets
I pulled out the changes for const expressions from https://github.com/rust-lang/rust/pull/71592 (without the trait object diagnostic changes) and made some small changes; the implementation is `@estebank's.`
We're also going to want to make some changes separately to account for trait objects (they result in poor diagnostics, as is evident from one of the test cases here), such as an adaption of https://github.com/rust-lang/rust/pull/72273.
Fixes https://github.com/rust-lang/rust/issues/70753.
r? `@petrochenkov`
rustc_mir: track inlined callees in SourceScopeData.
We now record which MIR scopes are the roots of *other* (inlined) functions's scope trees, which allows us to generate the correct debuginfo in codegen, similar to what LLVM inlining generates.
This PR makes the `ui` test `backtrace-debuginfo` pass, if the MIR inliner is turned on by default.
Also, `#[track_caller]` is now correct in the face of MIR inlining (cc `@anp).`
Fixes#76997.
r? `@rust-lang/wg-mir-opt`
Tweak match arm semicolon removal suggestion to account for futures
* Tweak and extend "use `.await`" suggestions
* Suggest removal of semicolon on prior match arm
* Account for `impl Future` when suggesting semicolon removal
* Silence some errors when encountering `await foo()?` as can't be certain what the intent was
*Thanks to https://twitter.com/a_hoverbear/status/1318960787105353728 for pointing this out!*
Split out statement attributes changes from #78306
This is the same as PR https://github.com/rust-lang/rust/pull/78306, but `unused_doc_comments` is modified to explicitly ignore statement items (which preserves the current behavior).
This shouldn't have any user-visible effects, so it can be landed without lang team discussion.
---------
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
Compute proper module parent during resolution
Fixes#75982
The direct parent of a module may not be a module
(e.g. `const _: () = { #[path = "foo.rs"] mod foo; };`).
To find the parent of a module for purposes of resolution, we need to
walk up the tree until we hit a module or a crate root.
fix def collector for impl trait
fixes#77329
We now consistently make `impl Trait` a hir owner, requiring some special casing for synthetic generic params.
r? `@eddyb`
Rollup of 12 pull requests
Successful merges:
- #75115 (`#[deny(unsafe_op_in_unsafe_fn)]` in sys/cloudabi)
- #76614 (change the order of type arguments on ControlFlow)
- #77610 (revise Hermit's mutex interface to support the behaviour of StaticMutex)
- #77830 (Simplify query proc-macros)
- #77930 (Do not ICE with TraitPredicates containing [type error])
- #78069 (Fix const core::panic!(non_literal_str).)
- #78072 (Cleanup constant matching in exhaustiveness checking)
- #78119 (Throw core::panic!("message") as &str instead of String.)
- #78191 (Introduce a temporary for discriminant value in MatchBranchSimplification)
- #78272 (const_evaluatable_checked: deal with unused nodes + div)
- #78318 (TyCtxt: generate single impl block with `slice_interners` macro)
- #78327 (resolve: Relax macro resolution consistency check to account for any errors)
Failed merges:
r? `@ghost`
Simplify query proc-macros
The query code generation is split between proc-macros and regular macros in `rustc_middle::ty::query`.
This PR removes unused capabilities of the proc-macros, and tend to use regular macros for the logic.
Unconditionally capture tokens for attributes.
This allows us to avoid synthesizing tokens in `prepend_attr`, since we
have the original tokens available.
We still need to synthesize tokens when expanding `cfg_attr`,
but this is an unavoidable consequence of the syntax of `cfg_attr` -
the user does not supply the `#` and `[]` tokens that a `cfg_attr`
expands to.
This is based on PR https://github.com/rust-lang/rust/pull/77250 - this PR exposes a bug in the current `collect_tokens` implementation, which is fixed by the rewrite.
Fixes#75982
The direct parent of a module may not be a module
(e.g. `const _: () = { #[path = "foo.rs"] mod foo; };`).
To find the parent of a module for purposes of resolution, we need to
walk up the tree until we hit a module or a crate root.
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
If there are two lists of different sizes,
iterating over the smaller list and then
looking up in the larger list is cheaper
than vice versa, because lookups scale
sublinearly.
move `visit_predicate` into `TypeVisitor`
Seems easier than dealing with `PredicateVisitor` for me which I needed for object safety checks for `PredicateAtom::ConstEvaluatable`. Is there a reason I am missing for this split?
r? @matthewjasper
improve const infer error
For type inference we probably have to be careful about subtyping and stuff but considering that subtyping shouldn't be relevant for constants I don't really see a reason why we may not want to reuse the const origin here.
r? `@varkor`
Clean up and improve some docs
* compiler docs
* Don't format list as part of a code block
* Clean up some other formatting
* rustdoc book
* Update CommonMark spec version to latest (0.28 -> 0.29)
* Clean up some various wording and formatting
Fix trait solving ICEs
- Selection candidates that are known to be applicable are preferred
over candidates that are not.
- Don't ICE if a projection/object candidate is no longer applicable
(this can happen due to cycles in normalization)
- Normalize supertraits when finding trait object candidates
Closes#77653Closes#77656
r? `@nikomatsakis`
Make fewer types generic over QueryContext
While trying to refactor `rustc_query_system::query::QueryContext` to make it dyn-safe, I noticed some smaller things:
* QueryConfig doesn't need to be generic over QueryContext
* ~~The `kind` field on QueryJobId is unused~~
* Some unnecessary where clauses
* Many types in `job.rs` where generic over `QueryContext` but only needed `QueryContext::Query`.
If handle_cycle_error() could be refactored to not take `error: CycleError<CTX::Query>`, all those bounds could be removed as well.
Changing `find_cycle_in_stack()` in job.rs to not take a `tcx` argument is the only functional change here. Everything else is just updating type signatures. (aka compile-error driven development ^^)
~~Currently there is a weird bug where memory usage suddenly skyrockets when running UI tests. I'll investigate that tomorrow.
A perf run probably won't make sense before that is fixed.~~
EDIT: `kind` actually is used by `Eq`, and re-adding it fixed the memory issue.
