Implement multidispatch and conditional dispatch. Because we do not attempt to preserve crate concatenation, this is a backwards compatible change. This is not yet fully integrated into method dispatch, so "UFCS"-style wrappers must be used to take advantage of the new features (see the run-pass tests).
cc #17307 (multidispatch)
cc #5527 (trait reform -- conditional dispatch)
Because we no longer preserve crate concatenability, this deviates slightly from what was specified in the RFC. The motivation for this change is described in [this blog post](http://smallcultfollowing.com/babysteps/blog/2014/09/30/multi-and-conditional-dispatch-in-traits/). I will post an amendment to the RFC in due course but do not anticipate great controversy on this point -- particularly as the RFCs more important features (e.g., conditional dispatch) just don't work without the change.
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes#17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
Updates the other_op function shared by the union/intersect/difference/symmetric_difference -with functions to fix an issue where certain elements would not be present in the result. To fix this, when other op is called, we resize self's nbits to account for any new elements that may be added to the set.
Example:
```rust
let mut a = BitvSet::new();
let mut b = BitvSet::new();
a.insert(0);
b.insert(5);
a.union_with(&b);
println!("{}", a); //Prints "{0}" instead of "{0, 5}"
```
parameter list.
This breaks code like:
fn f(a: int, a: int) { ... }
fn g<T,T>(a: T) { ... }
Change this code to not use the same name for a parameter. For example:
fn f(a: int, b: int) { ... }
fn g<T,U>(a: T) { ... }
Code like this is *not* affected, since `_` is not an identifier:
fn f(_: int, _: int) { ... } // OK
Closes#17568.
r? @alexcrichton
[breaking-change]
Instead of returning &'static [u8], an invocation of `bytes!()` now returns
`&'static [u8, ..N]` where `N` is the length of the byte vector. This should
functionally be the same, but there are some cases where an explicit cast may be
needed, so this is a:
[breaking-change]
This commit repurposes most statics as constants in the standard library itself,
with the exception of TLS keys which precisely have their own memory location as
an implementation detail.
This commit also rewrites the bitflags syntax to use `const` instead of
`static`. All invocations will need to replace the word `static` with `const`
when declaring flags.
Due to the modification of the `bitflags!` syntax, this is a:
[breaking-change]
This crate is largely just one giant header file, so there's no need for any of
these values to actually have a memory location, they're all just basically a
regular #define.
The tables in libunicode are far too large to want to be inlined into any other
program, so these tables are all going to remain `static`. For them to be legal,
they cannot reference one another by value, but instead use references now.
This commit also modifies the src/etc/unicode.py script to generate the right
tables.
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
[rfc]: https://github.com/rust-lang/rfcs/pull/246
While booleans are represented as i1 in SSA values, LLVM expects them
to be stored/loaded as i8 values. Using i1 as we do now works, but
kills some optimizations, so we should switch to i8, just like we do
everywhere else.
Fixes#16959.
Using reallocate(old_ptr, old_size, new_size, align) makes a lot more
sense than reallocate(old_ptr, new_size, align, old_size) and matches up
with the order used by existing platform APIs like mremap.
Closes#17837
[breaking-change]
While booleans are represented as i1 in SSA values, LLVM expects them
to be stored/loaded as i8 values. Using i1 as we do now works, but
kills some optimizations, so we should switch to i8, just like we do
everywhere else.
Fixes#16959.
This fixes a soundness problem where `Fn` unboxed closures can mutate free variables in the environment.
The following presently builds:
```rust
#![feature(unboxed_closures, overloaded_calls)]
fn main() {
let mut x = 0u;
let _f = |&:| x = 42;
}
```
However, this is equivalent to writing the following, which borrowck rightly rejects:
```rust
struct F<'a> {
x: &'a mut uint
}
impl<'a> Fn<(),()> for F<'a> {
#[rust_call_abi_hack]
fn call(&self, _: ()) {
*self.x = 42; // error: cannot assign to data in a `&` reference
}
}
fn main() {
let mut x = 0u;
let _f = F { x: &mut x };
}
```
This problem is unique to unboxed closures; boxed closures cannot be invoked through an immutable reference and are not subject to it.
This change marks upvars of `Fn` unboxed closures as freely aliasable in mem_categorization, which causes borrowck to reject attempts to mutate or mutably borrow them.
@zwarich pointed out that even with this change, there are remaining soundness issues related to regionck (issue #17403). This region issue affects boxed closures as well.
Closes issue #17780
parameter list.
This breaks code like:
fn f(a: int, a: int) { ... }
fn g<T,T>(a: T) { ... }
Change this code to not use the same name for a parameter. For example:
fn f(a: int, b: int) { ... }
fn g<T,U>(a: T) { ... }
Code like this is *not* affected, since `_` is not an identifier:
fn f(_: int, _: int) { ... } // OK
Closes#17568.
[breaking-change]
Apart from making the build system determine the LLDB version, this PR also fixes an issue with enums in LLDB pretty printers. In order for GDB's pretty printers to know for sure if a field of some value is an enum discriminant, I had rustc mark discriminant fields with the `artificial` DWARF tag. This worked out nicely for GDB but it turns out that one can't access artificial fields from LLDB. So I changed the debuginfo representation so that enum discriminants are marked by the special field name `RUST$ENUM$DISR` instead, which works in both cases.
The PR does not activate the LLDB test suite yet.
Functions that add bits now ensure that any unused bits are set to 0.
`into_bitv` sanitizes the nbits of the Bitv/BitvSet it returns by setting the nbits to the current capacity.
Fix a bug with `union_with` and `symmetric_difference` with due to not updating nbits properly
Add test cases to the _with functions
Remove `get_mut_ref`
This is a [breaking-change]. The things you will need to fix are:
1. BitvSet's `unwrap()` has been renamed to `into_bitv`
2. BitvSet's `get_mut_ref()` has been removed. Use `into_bitv()` and `from_bitv()` instead.
