Verify copies of mutable pointers in 2 stages in ReferencePropagation
Fixes#111422
In the first stage, we mark the copies as reborrows, to be checked later.
In the second stage, we walk the reborrow chains to verify that all stages are fully replacable.
The replacement itself mirrors the check, and iterates through the reborrow chain.
r? ``````@RalfJung``````
cc ``````@JakobDegen``````
Implement builtin # syntax and use it for offset_of!(...)
Add `builtin #` syntax to the parser, as well as a generic infrastructure to support both item and expression position builtin syntaxes. The PR also uses this infrastructure for the implementation of the `offset_of!` macro, added by #106934.
cc `@petrochenkov` `@DrMeepster`
cc #110680 `builtin #` tracking issue
cc #106655 `offset_of!` tracking issue
Disable nrvo mir opt
See #111005 and #110902 . The ICE can definitely be hit on stable, the miscompilation I'm not sure about. The pass makes some pretty sketchy assumptions though, and we should not have it on while that's the case.
I'm not going to work on actually fixing this, it's probably not excessively difficult though.
r? rust-lang/mir-opt
ConstProp into PlaceElem::Index.
Noticed this while looking at keccak output MIR.
This pass aims to replace `ProjectionElem::Index` with `ProjectionElem::ConstantIndex` during ConstProp.
r? `@ghost`
Rename InstCombine to InstSimplify
```
╭ ➜ ben@archlinux:~/rust
╰ ➤ rg -i instcombine
src/doc/rustc-dev-guide/src/mir/optimizations.md
134:may have been misapplied. Examples of this are `InstCombine` and `ConstantPropagation`.
src/ci/docker/host-x86_64/disabled/dist-x86_64-haiku/llvm-config.sh
38: instcombine instrumentation interpreter ipo irreader lanai \
tests/codegen/slice_as_from_ptr_range.rs
4:// min-llvm-version: 15.0 (because this is a relatively new instcombine)
```
r? `@scottmcm`
Reduce MIR dump file count for MIR-opt tests
As referenced in issue #109502 , mir-opt tests previously used the -Zdump-mir=all flag, which generates very large output. This PR only dumps the passes under test, greatly reducing dump output.
Don't validate constants in const propagation
Validation is neither necessary nor desirable.
The constant validation is already omitted at mir-opt-level >= 3, so there there are not changes in MIR test output (the propagation of invalid constants is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
Make `mem::replace` simpler in codegen
Since they'd mentioned more intrinsics for simplifying stuff recently,
r? `@WaffleLapkin`
This is a continuation of me looking at foundational stuff that ends up with more instructions than it really needs. Specifically I noticed this one because `Range::next` isn't MIR-inlining, and one of the largest parts of it is a `replace::<usize>` that's a good dozen instructions instead of the two it could be.
So this means that `ptr::write` with a `Copy` type no longer generates worse IR than manually dereferencing (well, at least in LLVM -- MIR still has bonus pointer casts), and in doing so means that we're finally down to just the two essential `memcpy`s when emitting `mem::replace` for a large type, rather than the bonus-`alloca` and three `memcpy`s we emitted before this ([or the 6 we currently emit in 1.69 stable](https://rust.godbolt.org/z/67W8on6nP)). That said, LLVM does _usually_ manage to optimize the extra code away. But it's still nice for it not to have to do as much, thanks to (for example) not going through an `alloca` when `replace`ing a primitive like a `usize`.
(This is a new intrinsic, but one that's immediately lowered to existing MIR constructs, so not anything that MIRI or the codegen backends or MIR semantics needs to do work to handle.)
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
1c1c8e442a (diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80)
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
`IntoFuture::into_future` is no longer unstable
We don't need to gate the `IntoFuture::into_future` call in `.await` lowering anymore.
``@bors`` rollup
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Remove the size of locals heuristic in MIR inlining
This heuristic doesn't necessarily correlate to complexity of the MIR Body. In particular, a lot of straight-line code in MIR tends to never reuse a local, even though any optimizer would effectively reuse the storage or just put everything in registers. So it doesn't even necessarily make sense that this would be a stack size heuristic.
So... what happens if we just delete the heuristic? The benchmark suite improves significantly. Less heuristics better?
r? `@cjgillot`
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Deduplicate unreachable blocks, for real this time
In https://github.com/rust-lang/rust/pull/106428 (in particular 41eda69516) we noticed that inlining `unreachable_unchecked` can produce duplicate unreachable blocks. So we improved two MIR optimizations: `SimplifyCfg` was given a simplify to deduplicate unreachable blocks, then `InstCombine` was given a combiner to deduplicate switch targets that point at the same block. The problem is that change doesn't actually work.
Our current pass order is
```
SimplifyCfg (does nothing relevant to this situation)
Inline (produces multiple unreachable blocks)
InstCombine (doesn't do anything here, oops)
SimplifyCfg (produces the duplicate SwitchTargets that InstCombine is looking for)
```
So in here, I have factored out the specific function from `InstCombine` and placed it inside the simplify that produces the case it is looking for. This should ensure that it runs in the scenario it was designed for.
Fixes https://github.com/rust-lang/rust/issues/110551
r? `@cjgillot`
Refactor unwind in MIR
This makes unwinding from current `Option<BasicBlock>` into
```rust
enum UnwindAction {
Continue,
Cleanup(BasicBlock),
Unreachable,
Terminate,
}
```
cc `@JakobDegen` `@RalfJung` `@Amanieu`
Check pattern refutability on THIR
The current `check_match` query is based on HIR, but partially re-lowers HIR into THIR.
This PR proposed to use the results of the `thir_body` query to check matches, instead of re-building THIR.
Most of the diagnostic changes are spans getting shorter, or commas/semicolons not getting removed.
This PR degrades the diagnostic for confusing constants in patterns (`let A = foo()` where `A` resolves to a `const A` somewhere): it does not point ot the definition of `const A` any more.
Insert alignment checks for pointer dereferences when debug assertions are enabled
Closes https://github.com/rust-lang/rust/issues/54915
- [x] Jake tells me this sounds like a place to use `MirPatch`, but I can't figure out how to insert a new basic block with a new terminator in the middle of an existing basic block, using `MirPatch`. (if nobody else backs up this point I'm checking this as "not actually a good idea" because the code looks pretty clean to me after rearranging it a bit)
- [x] Using `CastKind::PointerExposeAddress` is definitely wrong, we don't want to expose. Calling a function to get the pointer address seems quite excessive. ~I'll see if I can add a new `CastKind`.~ `CastKind::Transmute` to the rescue!
- [x] Implement a more helpful panic message like slice bounds checking.
r? `@oli-obk`
Use span of placeholders in format_args!() expansion.
`format_args!("{}", x)` expands to something that contains `Argument::new_display(&x)`. That entire expression was generated with the span of `x`.
After this PR, `&x` uses the span of `x`, but the `new_display` call uses the span of the `{}` placeholder within the format string. If an implicitly captured argument was used like in `format_args!("{x}")`, both use the span of the `{x}` placeholder.
This fixes https://github.com/rust-lang/rust/issues/109576, and also allows for more improvements to similar diagnostics in the future, since the usage of `x` can now be traced to the exact `{}` placeholder that required it to be `Display` (or `Debug` etc.)
Thanks to the combination of #108246 and #108442 it could already remove identity transmutes.
With this PR, it can also simplify them to `IntToInt` casts, `Discriminant` reads, or `Field` projections.
Permit the MIR inliner to inline diverging functions
This heuristic prevents inlining of `hint::unreachable_unchecked`, which in turn makes `Option/Result::unwrap_unchecked` a bad inlining candidate. I looked through the changes to `core`, `alloc`, `std`, and `hashbrown` by hand and they all seem reasonable. Let's see how this looks in perf...
---
Based on rustc-perf it looks like this regresses ctfe-stress, and the cachegrind diff indicates that this regression is in `InterpCx::statement`. I don't know how to do any deeper analysis because that function is _enormous_ in the try toolchain, which has no debuginfo in it. And a local build produces significantly different codegen for that function, even with LTO.
Simpler checked shifts in MIR building
Doing masking to check unsigned shift amounts is overcomplicated; just comparing the shift directly saves a statement and a temporary, as well as is much easier to read as a human. And shifting by unsigned is the canonical case -- notably, all the library shifting methods (that don't support every type) take shift RHSs as `u32` -- so we might as well make that simpler since it's easy to do so.
This PR also changes *signed* shift amounts to `IntToInt` casts and then uses the same check as for unsigned. The bit-masking is a nice trick, but for example LLVM actually canonicalizes it to an unsigned comparison anyway <https://rust.godbolt.org/z/8h59fMGT4> so I don't think it's worth the effort and the extra `Constant`. (If MIR's `assert` was `assert_nz` then the masking might make sense, but when the `!=` uses another statement I think the comparison is better.)
To review, I suggest looking at 2ee0468c49 first -- that's the interesting code change and has a MIR diff.
My favourite part of the diff:
```diff
- _20 = BitAnd(_19, const 340282366920938463463374607431768211448_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
- _21 = Ne(move _20, const 0_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
- assert(!move _21, "attempt to shift right by `{}`, which would overflow", _19) -> [success: bb3, unwind: bb7]; // scope 0 at $DIR/shifts.rs:+2:34: +2:44
+ _18 = Lt(_17, const 8_u128); // scope 0 at $DIR/shifts.rs:+2:34: +2:44
+ assert(move _18, "attempt to shift right by `{}`, which would overflow", _17) -> [success: bb3, unwind: bb7]; // scope 0 at $DIR/shifts.rs:+2:34: +2:44
```
Updates `interpret`, `codegen_ssa`, and `codegen_cranelift` to consume the new cast instead of the intrinsic.
Includes `CastTransmute` for custom MIR building, to be able to test the extra UB.
