Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
Commits for details.
This shouldn't change the generated code at all (except for switching to `LitBinary` from an explicit ExprVec of individual ExprLit bytes for `prefix_bytes`).
Pre-step towards issue #12624 and others: Introduce ExprUseVisitor, remove the
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
r? @alexcrichton
Hi rust enthusiasts,
With this patch I propose to add a "streaming" API to the existing json parser in libserialize.
By "streaming" I mean a parser that let you act on JsonEvents that are generated as while parsing happens, as opposed to parsing the entire source, generating a big data structure and working with this data structure. I think both approaches have their pros and cons so this pull request adds the streaming API, preserving the existing one.
The streaming API is simple: It consist into an Iterator<JsonEvent> that consumes an Iterator<char>. JsonEvent is an enum with values such as NumberValue(f64), BeginList, EndList, BeginObject, etc.
The user would ideally use the API as follows:
```
for evt in StreamingParser::new(src) {
match evt {
BeginList => {
// ...
}
// ...
}
}
```
The iterator provides a stack() method returning a slice of StackNodes which represent "where we currently are" in the logical structure of the json stream (for instance at "foo.bar[3].x" you get [ Key("foo"), Key("bar"), Index(3), Key("x") ].)
I wrote "ideally" above because the current way rust expands for loops, you can't call the stack() method because the iterator is already borrowed. So for know you need to manually advance the iterator in the loop. I hope this is something we can cope with, until for loops are better integrated with the compiler.
Streaming parsers are useful when you want to read from a json stream, generate a custom data structure and you know how the json is going to be structured. For example, imagine you have to parse a 3D mesh file represented in the json format. In this case you probably expect to have large arrays of vertices and using the generic parser will be very inefficient because it will create a big list of all these vertices, which you will copy into a contiguous array afterwards (so you end up doing a lot of small allocations, parsing the json once and parsing the data structure afterwards). With a streaming parser, you can add the vertices to a contiguous array as they come in without paying the cost of creating the intermediate Json data structure. You have much fewer allocations since you write directly in the final data structure and you can be smart in how you will pre-allocate it.
I added added this directly into serialize::json rather than in its own library because it turns out I can reuse most of the existing code whereas maintaining a separate library (which I did originally) forces me to duplicate this code.
I wrote this trying to minimize the size of the patch so there may be places where the code could be nicer at the expenses of more changes (let me know what you prefer).
This is my first (potential) contribution to rust, so please let me know if I am doing something wrong (maybe I should have first introduced this proposition in the mailing list, or opened a github issue, etc.?). I work a few meters away from @pknfelix so I am not too hard to find :)
When a syntax extension is loaded by the compiler, the dylib that is opened may
have other dylibs that it depends on. The dynamic linker must be able to find
these libraries on the system or else the library will fail to load.
Currently, unix gets by with the use of rpaths. This relies on the dylib not
moving around too drastically relative to its dependencies. For windows,
however, this is no rpath available, and in theory unix should work without
rpaths as well.
This modifies the compiler to add all -L search directories to the dynamic
linker's set of load paths. This is currently managed through environment
variables for each platform.
Closes#13848
When a syntax extension is loaded by the compiler, the dylib that is opened may
have other dylibs that it depends on. The dynamic linker must be able to find
these libraries on the system or else the library will fail to load.
Currently, unix gets by with the use of rpaths. This relies on the dylib not
moving around too drastically relative to its dependencies. For windows,
however, this is no rpath available, and in theory unix should work without
rpaths as well.
This modifies the compiler to add all -L search directories to the dynamic
linker's set of load paths. This is currently managed through environment
variables for each platform.
Closes#13848
The compiler has previously been producing binaries on the order of 1.8MB for
hello world programs "fn main() {}". This is largely a result of the compilation
model used by compiling entire libraries into a single object file and because
static linking is favored by default.
When linking, linkers will pull in the entire contents of an object file if any
symbol from the object file is used. This means that if any symbol from a rust
library is used, the entire library is pulled in unconditionally, regardless of
whether the library is used or not.
Traditional C/C++ projects do not normally encounter these large executable
problems because their archives (rust's rlibs) are composed of many objects.
Because of this, linkers can eliminate entire objects from being in the final
executable. With rustc, however, the linker does not have the opportunity to
leave out entire object files.
In order to get similar benefits from dead code stripping at link time, this
commit enables the -ffunction-sections and -fdata-sections flags in LLVM, as
well as passing --gc-sections to the linker *by default*. This means that each
function and each global will be placed into its own section, allowing the
linker to GC all unused functions and data symbols.
By enabling these flags, rust is able to generate much smaller binaries default.
On linux, a hello world binary went from 1.8MB to 597K (a 67% reduction in
size). The output size of dynamic libraries remained constant, but the output
size of rlibs increased, as seen below:
libarena - 2.27% bigger
libcollections - 0.64% bigger
libflate - 0.85% bigger
libfourcc - 14.67% bigger
libgetopts - 4.52% bigger
libglob - 2.74% bigger
libgreen - 9.68% bigger
libhexfloat - 13.68% bigger
liblibc - 10.79% bigger
liblog - 10.95% bigger
libnative - 8.34% bigger
libnum - 2.31% bigger
librand - 1.71% bigger
libregex - 6.43% bigger
librustc - 4.21% bigger
librustdoc - 8.98% bigger
librustuv - 4.11% bigger
libsemver - 2.68% bigger
libserialize - 1.92% bigger
libstd - 3.59% bigger
libsync - 3.96% bigger
libsyntax - 4.96% bigger
libterm - 13.96% bigger
libtest - 6.03% bigger
libtime - 2.86% bigger
liburl - 6.59% bigger
libuuid - 4.70% bigger
libworkcache - 8.44% bigger
This increase in size is a result of encoding many more section names into each
object file (rlib). These increases are moderate enough that this change seems
worthwhile to me, due to the drastic improvements seen in the final artifacts.
The overall increase of the stage2 target folder (not the size of an install)
went from 337MB to 348MB (3% increase).
Additionally, linking is generally slower when executed with all these new
sections plus the --gc-sections flag. The stage0 compiler takes 1.4s to link the
`rustc` binary, where the stage1 compiler takes 1.9s to link the binary. Three
megabytes are shaved off the binary. I found this increase in link time to be
acceptable relative to the benefits of code size gained.
This commit only enables --gc-sections for *executables*, not dynamic libraries.
LLVM does all the heavy lifting when producing an object file for a dynamic
library, so there is little else for the linker to do (remember that we only
have one object file).
I conducted similar experiments by putting a *module's* functions and data
symbols into its own section (granularity moved to a module level instead of a
function/static level). The size benefits of a hello world were seen to be on
the order of 400K rather than 1.2MB. It seemed that enough benefit was gained
using ffunction-sections that this route was less desirable, despite the lesser
increases in binary rlib size.
The compiler has previously been producing binaries on the order of 1.8MB for
hello world programs "fn main() {}". This is largely a result of the compilation
model used by compiling entire libraries into a single object file and because
static linking is favored by default.
When linking, linkers will pull in the entire contents of an object file if any
symbol from the object file is used. This means that if any symbol from a rust
library is used, the entire library is pulled in unconditionally, regardless of
whether the library is used or not.
Traditional C/C++ projects do not normally encounter these large executable
problems because their archives (rust's rlibs) are composed of many objects.
Because of this, linkers can eliminate entire objects from being in the final
executable. With rustc, however, the linker does not have the opportunity to
leave out entire object files.
In order to get similar benefits from dead code stripping at link time, this
commit enables the -ffunction-sections and -fdata-sections flags in LLVM, as
well as passing --gc-sections to the linker *by default*. This means that each
function and each global will be placed into its own section, allowing the
linker to GC all unused functions and data symbols.
By enabling these flags, rust is able to generate much smaller binaries default.
On linux, a hello world binary went from 1.8MB to 597K (a 67% reduction in
size). The output size of dynamic libraries remained constant, but the output
size of rlibs increased, as seen below:
libarena - 2.27% bigger ( 292872 => 299508)
libcollections - 0.64% bigger ( 6765884 => 6809076)
libflate - 0.83% bigger ( 186516 => 188060)
libfourcc - 14.71% bigger ( 307290 => 352498)
libgetopts - 4.42% bigger ( 761468 => 795102)
libglob - 2.73% bigger ( 899932 => 924542)
libgreen - 9.63% bigger ( 1281718 => 1405124)
libhexfloat - 13.88% bigger ( 333738 => 380060)
liblibc - 10.79% bigger ( 551280 => 610736)
liblog - 10.93% bigger ( 218208 => 242060)
libnative - 8.26% bigger ( 1362096 => 1474658)
libnum - 2.34% bigger ( 2583400 => 2643916)
librand - 1.72% bigger ( 1608684 => 1636394)
libregex - 6.50% bigger ( 1747768 => 1861398)
librustc - 4.21% bigger (151820192 => 158218924)
librustdoc - 8.96% bigger ( 13142604 => 14320544)
librustuv - 4.13% bigger ( 4366896 => 4547304)
libsemver - 2.66% bigger ( 396166 => 406686)
libserialize - 1.91% bigger ( 6878396 => 7009822)
libstd - 3.59% bigger ( 39485286 => 40902218)
libsync - 3.95% bigger ( 1386390 => 1441204)
libsyntax - 4.96% bigger ( 35757202 => 37530798)
libterm - 13.99% bigger ( 924580 => 1053902)
libtest - 6.04% bigger ( 2455720 => 2604092)
libtime - 2.84% bigger ( 1075708 => 1106242)
liburl - 6.53% bigger ( 590458 => 629004)
libuuid - 4.63% bigger ( 326350 => 341466)
libworkcache - 8.45% bigger ( 1230702 => 1334750)
This increase in size is a result of encoding many more section names into each
object file (rlib). These increases are moderate enough that this change seems
worthwhile to me, due to the drastic improvements seen in the final artifacts.
The overall increase of the stage2 target folder (not the size of an install)
went from 337MB to 348MB (3% increase).
Additionally, linking is generally slower when executed with all these new
sections plus the --gc-sections flag. The stage0 compiler takes 1.4s to link the
`rustc` binary, where the stage1 compiler takes 1.9s to link the binary. Three
megabytes are shaved off the binary. I found this increase in link time to be
acceptable relative to the benefits of code size gained.
This commit only enables --gc-sections for *executables*, not dynamic libraries.
LLVM does all the heavy lifting when producing an object file for a dynamic
library, so there is little else for the linker to do (remember that we only
have one object file).
I conducted similar experiments by putting a *module's* functions and data
symbols into its own section (granularity moved to a module level instead of a
function/static level). The size benefits of a hello world were seen to be on
the order of 400K rather than 1.2MB. It seemed that enough benefit was gained
using ffunction-sections that this route was less desirable, despite the lesser
increases in binary rlib size.
Compile-fail tests for syntax extensions belong in this suite which has correct
dependencies on all artifacts rather than just the target artifacts.
Closes#13818
Similar to my recent changes to ~[T]/&[T], these changes remove the vstore abstraction and represent str types as ~(str) and &(str). The Option<uint> in ty_str is the length of the string, None if the string is dynamically sized.
This addresses the ICE from #13763, but it does not allow the test to compile,
due to #13768. An alternate test was checked in in the meantime.
Closes#13763
This addresses the ICE from #13763, but it does not allow the test to compile,
due to #13768. An alternate test was checked in in the meantime.
Closes#13763
It didn't work because it tried to call itself but symbols are not
exported as default in executables.
Note that `fun5` is not internal anymore since it is in library.
Second commit removes/updates some old tests.
It didn't work because it tried to call itself but symbols are not
exported as default in executables.
Note that `fun5` is not internal anymore since it is in library.
Implements [RFC 7](https://github.com/rust-lang/rfcs/blob/master/active/0007-regexps.md) and will hopefully resolve#3591. The crate is marked as experimental. It includes a syntax extension for compiling regexps to native Rust code.
Embeds and passes the `basic`, `nullsubexpr` and `repetition` tests from [Glenn Fowler's (slightly modified by Russ Cox for leftmost-first semantics) testregex test suite](http://www2.research.att.com/~astopen/testregex/testregex.html). I've also hand written a plethora of other tests that exercise Unicode support, the parser, public API, etc. Also includes a `regex-dna` benchmark for the shootout.
I know the addition looks huge at first, but consider these things:
1. More than half the number of lines is dedicated to Unicode character classes.
2. Of the ~4,500 lines remaining, 1,225 of them are comments.
3. Another ~800 are tests.
4. That leaves 2500 lines for the meat. The parser is ~850 of them. The public API, compiler, dynamic VM and code generator (for `regexp!`) make up the rest.
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
Specifically, the method parameter cardinality mismatch or missing
method error message span now gets method itself exactly. It was the
whole expression.
Closes#9390Closes#13684Closes#13709
This patch removes the special auto-rooting for `@` from the borrow checker. With `@` moving into a library, it doesn't make sense to keep this code around anymore. It also simplifies `trans` by removing root checking from there
@nikomatsakis
Closes: #11586
This is really only useful for #[cfg()]. For example:
```rust
enum Foo {
Bar,
Baz,
#[cfg(blob)]
Blob
}
fn match_foos(f: &Foo) {
match *f {
Bar => {}
Baz => {}
#[cfg(blob)]
Blob => {}
}
}
```
This is a kind of weird place to allow attributes, so it should probably
be discussed before merging.
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes#13666
[breaking-change]
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes#13666
[breaking-change]
Specifically, the method parameter cardinality mismatch or missing
method error message span now gets method itself exactly. It was the
whole expression.
Closes#9390Closes#13684Closes#13709
This allows the use of syntax extensions when cross-compiling (fixing #12102). It does this by encoding the target triple in the crate metadata and checking it when searching for files. Currently the crate triple must match the host triple when there is a macro_registrar_fn, it must match the target triple when linking, and can match either when only macro_rules! macros are used.
due to carelessness, this is pretty much a duplicate of https://github.com/mozilla/rust/pull/13450.
This adds the target triple to the crate metadata.
When searching for a crate the phase (link, syntax) is taken into account.
During link phase only crates matching the target triple are considered.
During syntax phase, either the target or host triple will be accepted, unless
the crate defines a macro_registrar, in which case only the host triple will
match.
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes#12224
The filestem of the desired output isn't necessarily a valid crate id, and
calling unwrap() will trigger an ICE in rustc. This tries a little harder to
infer a "valid crate id" from a crate, with an eventual fallback to a generic
crate id if alll else fails.
Closes#11107
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes#12224
[breaking-change]
The BSD builders are failing with a different error that is not a timeout error
(Connection reset by peer), so this test isn't really all that useful on
freebsd. Due to a lack of a better idea of how to test a connect timeout, this
test is going to just be ignored for now.
The BSD builders are failing with a different error that is not a timeout error
(Connection reset by peer), so this test isn't really all that useful on
freebsd. Due to a lack of a better idea of how to test a connect timeout, this
test is going to just be ignored for now.
Now with proper checking of enums and allows unsized fields as the last field in a struct or variant. This PR only checks passing of unsized types and distinguishing them from sized ones. To be safe we also need to control storage.
Closes issues #12969 and #13121, supersedes #13375 (all the discussion there is valid here too).
This currently requires linking against a library like libquadmath (or
libgcc), because compiler-rt barely has any support for this and most
hardware does not yet have 128-bit precision floating point. For this
reason, it's currently hidden behind a feature gate.
When compiler-rt is updated to trunk, some tests can be added for
constant evaluation since there will be support for the comparison
operators.
Closes#13381
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
This gives a better NOTE error message when a privacy error is encountered with
a static method. Previously no note was emitted (due to lack of support), but
now a note is emitted indicating that the struct/enum itself is private.
Closes#13641
This gives a better NOTE error message when a privacy error is encountered with
a static method. Previously no note was emitted (due to lack of support), but
now a note is emitted indicating that the struct/enum itself is private.
Closes#13641
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
Syntax-only crates are no longer registered with the cstore, so there's no need
to allocate crate numbers to them. This ends up leaving gaps in the crate
numbering scheme which is not expected in the rest of the compiler.
Closes#13560
Fix#12856.
I wanted to put this up first because I wanted to get feedback about the second commit in the series, commit 8599236. Its the more invasive part of the patch and is largely just belt-and-suspenders assertion checking; in the commit message I mentioned at least one other approach we could take here. Or we could drop the belt-and-suspenders and just rely on the guard added in the first patch, commit 8d6a005 (which is really quite trivial on its own).
So any feedback on what would be better is appreciated.
r? @nikomatsakis
When instantiating trait default methods for certain implementation,
`typeck` correctly combined type parameters from trait bound with those
from method bound, but didn't do so for lifetime parameters. Applies
the same logic to lifetime parameters.
Closes#13204
This commit changes the way move errors are reported when some value is
captured by a PatIdent. First, we collect all of the "cannot move out
of" errors before reporting them, and those errors with the same "move
source" are reported together. If the move is caused by a PatIdent (that
binds by value), we add a note indicating where it is and suggest the
user to put `ref` if they don't want the value to move. This makes the
"cannot move out of" error in match expression nicer (though the extra
note may not feel that helpful in other places :P). For example, with
the following code snippet,
```rust
enum Foo {
Foo1(~u32, ~u32),
Foo2(~u32),
Foo3,
}
fn main() {
let f = &Foo1(~1u32, ~2u32);
match *f {
Foo1(num1, num2) => (),
Foo2(num) => (),
Foo3 => ()
}
}
```
Errors before the change:
```rust
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:11:9: 11:18 error: cannot move out of dereference of `&`-pointer
test.rs:11 Foo2(num) => (),
^~~~~~~~~
```
After:
```rust
test.rs:9:11: 9:13 error: cannot move out of dereference of `&`-pointer
test.rs:9 match *f {
^~
test.rs:10:14: 10:18 note: attempting to move value to here (to prevent the move, use `ref num1` or `ref mut num1` to capture value by reference)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:10:20: 10:24 note: and here (use `ref num2` or `ref mut num2`)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:11:14: 11:17 note: and here (use `ref num` or `ref mut num`)
test.rs:11 Foo2(num) => (),
^~~
```
Close#8064
Syntax-only crates are no longer registered with the cstore, so there's no need
to allocate crate numbers to them. This ends up leaving gaps in the crate
numbering scheme which is not expected in the rest of the compiler.
Closes#13560
When instantiating trait default methods for certain implementation,
`typeck` correctly combined type parameters from trait bound with those
from method bound, but didn't do so for lifetime parameters. Applies
the same logic to lifetime parameters.
Closes#13204
This removes the `priv` keyword from the language and removes private enum
variants as a result. The remaining use cases of private enum variants were all
updated to be a struct with one private field that is a private enum.
RFC: 0006-remove-priv
Closes#13535
There's now one unified way to return things from a macro, instead of
being able to choose the `AnyMacro` trait or the `MRItem`/`MRExpr`
variants of the `MacResult` enum. This does simplify the logic handling
the expansions, but the biggest value of this is it makes macros in (for
example) type position easier to implement, as there's this single thing
to modify.
By my measurements (using `-Z time-passes` on libstd and librustc etc.),
this appears to have little-to-no impact on expansion speed. There are
presumably larger costs than the small number of extra allocations and
virtual calls this adds (notably, all `macro_rules!`-defined macros have
not changed in behaviour, since they had to use the `AnyMacro` trait
anyway).
---
Summary of changes for dynamic syntax extension maintainers:
- `MacResult` is now a trait, and is returned as `~MacResult`
- `MRExpr` & `MRItem` are now `MacExpr::new` and `MacItem:new` respectively (which return `~MacResult`s)
- `MacResult::dummy_...` is `DummyResult::any` or `DummyResult::expr`
There's now one unified way to return things from a macro, instead of
being able to choose the `AnyMacro` trait or the `MRItem`/`MRExpr`
variants of the `MacResult` enum. This does simplify the logic handling
the expansions, but the biggest value of this is it makes macros in (for
example) type position easier to implement, as there's this single thing
to modify.
By my measurements (using `-Z time-passes` on libstd and librustc etc.),
this appears to have little-to-no impact on expansion speed. There are
presumably larger costs than the small number of extra allocations and
virtual calls this adds (notably, all `macro_rules!`-defined macros have
not changed in behaviour, since they had to use the `AnyMacro` trait
anyway).
Closes#13546 (workcache: Don't assume gcc exists on all platforms)
Closes#13545 (std: Remove pub use globs)
Closes#13530 (test: Un-ignore smallest-hello-world.rs)
Closes#13529 (std: Un-ignore some float tests on windows)
Closes#13528 (green: Add a helper macro for booting libgreen)
Closes#13526 (Remove RUST_LOG="::help" from the docs)
Closes#13524 (dist: Make Windows installer uninstall first. Closes#9563)
Closes#13521 (Change AUTHORS section in the man pages)
Closes#13519 (Update GitHub's Rust projects page.)
Closes#13518 (mk: Change windows to install from stage2)
Closes#13516 (liburl doc: insert missing hyphen)
Closes#13514 (rustdoc: Better sorting criteria for searching.)
Closes#13512 (native: Fix a race in select())
Closes#13506 (Use the unsigned integer types for bitwise intrinsics.)
Closes#13502 (Add a default impl for Set::is_superset)
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
Exposing ctpop, ctlz, cttz and bswap as taking signed i8/i16/... is just
exposing the internal LLVM names pointlessly (LLVM doesn't have "signed
integers" or "unsigned integers", it just has sized integer types
with (un)signed *operations*).
These operations are semantically working with raw bytes, which the
unsigned types model better.
During selection, libnative would erroneously re-acquire ownership of a task
when a separate thread still had ownership of the task. The loop in select()
was rewritten to acknowledge this race and instead block waiting to re-acquire
ownership rather than plowing through.
Closes#13494
Fixes#13507.
I haven't familiarized myself with this part of the rust compiler, so hopefully there are no mistakes (despite the simplicity of the commit). It is also 5am.
This includes a change to the way lifetime names are generated. Say we
figure that `[#0, 'a, 'b]` have to be the same lifetimes, then instead
of just generating a new lifetime `'c` like before to replace them, we
would reuse `'a`. This is done so that when the lifetime name comes
from an impl, we don't give something that's completely off, and we
don't have to do much work to figure out where the name came from. For
example, for the following code snippet:
```rust
struct Baz<'x> {
bar: &'x int
}
impl<'x> Baz<'x> {
fn baz1(&self) -> &int {
self.bar
}
}
```
`[#1, 'x]` (where `#1` is BrAnon(1) and refers to lifetime of `&int`)
have to be marked the same lifetime. With the old method, we would
generate a new lifetime `'a` and suggest `fn baz1(&self) -> &'a int`
or `fn baz1<'a>(&self) -> &'a int`, both of which are wrong.
Before, the `--crate-file-name` flag only checked crate attributes for
possible crate types. Now, if any type is specified by one or more
`--crate-type` flags, only the filenames for those types will be
emitted, and any types specified by crate attributes will be ignored.
Before, normal compilation and the --crate-file-name flag would
generate output based on both #![crate_type] attributes and
--crate-type flags. Now, if one or more flag is specified by command
line, only those will be used.
Closes#11573.
This bug was introduced in #13384 by accident, and this commit continues the
work of #13384 by finishing support for loading a syntax extension crate without
registering it with the local cstore.
Closes#13495
A mismatched type with more type parameters than the expected one causes
`typeck` looking up out of the bound of type parameter vector, which
leads to ICE.
Closes#13466
This bug was introduced in #13384 by accident, and this commit continues the
work of #13384 by finishing support for loading a syntax extension crate without
registering it with the local cstore.
Closes#13495
Previously, upstream C libraries were linked in a nondeterministic fashion
because they were collected through iter_crate_data() which is a nodeterministic
traversal of a hash map. When upstream rlibs had interdependencies among their
native libraries (such as libfoo depending on libc), then the ordering would
occasionally be wrong, causing linkage to fail.
This uses the topologically sorted list of libraries to collect native
libraries, so if a native library depends on libc it just needs to make sure
that the rust crate depends on liblibc.
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
* `Sender::try_send(t: T) -> bool`
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
* `SyncSender::try_send(t: T) -> TrySendResult<T>`
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
* `SyncSender::send_opt(t: T) -> Option<T>`
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
* `Receiver::try_recv(t: T) -> TryRecvResult<T>`
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
This patch fixes issue #13186.
When generating constant expression for enum, it is possible that
alignment of expression may be not equal to alignment of type. In that
case space after last struct field must be padded to match size of value
and size of struct. This commit adds that padding.
See detailed explanation in src/test/run-pass/trans-tag-static-padding.rs
A mismatched type with more type parameters than the expected one causes
`typeck` looking up out of the bound of type parameter vector, which
leads to ICE.
Closes#13466
Previously, upstream C libraries were linked in a nondeterministic fashion
because they were collected through iter_crate_data() which is a nodeterministic
traversal of a hash map. When upstream rlibs had interdependencies among their
native libraries (such as libfoo depending on libc), then the ordering would
occasionally be wrong, causing linkage to fail.
This uses the topologically sorted list of libraries to collect native
libraries, so if a native library depends on libc it just needs to make sure
that the rust crate depends on liblibc.
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
libstd: Implement `StrBuf`, a new string buffer type like `Vec`, and port all code over to use it.
Rebased & tests-fixed version of https://github.com/mozilla/rust/pull/13269
Previously, a private use statement would shadow a public use statement, all of
a sudden publicly exporting the privately used item. The correct behavior here
is to only shadow the use for the module in question, but for now it just
reverts the entire name to private so the pub use doesn't have much effect.
The behavior isn't exactly what we want, but this no longer has backwards
compatibility hazards.
Previously resolve was checking the "import resolution" for whether an import
had succeeded or not, but this was the same structure filled in by a previous
import if a name is shadowed. Instead, this alters resolve to consult the local
resolve state (as opposed to the shared one) to test whether an import succeeded
or not.
Closes#13404
Resolve is currently erroneously allowing imports through private `use`
statements in some circumstances, even across module boundaries. For example,
this code compiles successfully today:
use std::c_str;
mod test {
use c_str::CString;
}
This should not be allowed because it was explicitly decided that private `use`
statements are purely bringing local names into scope, they are not
participating further in name resolution.
As a consequence of this patch, this code, while valid today, is now invalid:
mod test {
use std::c_str;
unsafe fn foo() {
::test::c_str::CString::new(0 as *u8, false);
}
}
While plausibly acceptable, I found it to be more consistent if private imports
were only considered candidates to resolve the first component in a path, and no
others.
Closes#12612
I think that the test case from this issue has become out of date with resolve
changes in the past 9 months, and it's not entirely clear to me what the
original bug was.
Regardless, it seems like tricky resolve behavior, so tests were added to make
sure things resolved correctly and warnings were correctly reported.
Closes#7663
This fixes the categorization of the upvars of procs (represented internally
as once fns) to consider usage to require a loan. In doing so, upvars are no
longer allowed to be moved out of repeatedly in loops and such.
Closes#10398Closes#12041Closes#12127
This commit changes the way move errors are reported when some value is
captured by a PatIdent. First, we collect all of the "cannot move out
of" errors before reporting them, and those errors with the same "move
source" are reported together. If the move is caused by a PatIdent (that
binds by value), we add a note indicating where it is and suggest the
user to put `ref` if they don't want the value to move. This makes the
"cannot move out of" error in match expression nicer (though the extra
note may not feel that helpful in other places :P). For example, with
the following code snippet,
```rust
enum Foo {
Foo1(~u32, ~u32),
Foo2(~u32),
Foo3,
}
fn main() {
let f = &Foo1(~1u32, ~2u32);
match *f {
Foo1(num1, num2) => (),
Foo2(num) => (),
Foo3 => ()
}
}
```
Errors before the change:
```rust
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:11:9: 11:18 error: cannot move out of dereference of `&`-pointer
test.rs:11 Foo2(num) => (),
^~~~~~~~~
```
After:
```rust
test.rs:9:11: 9:13 error: cannot move out of dereference of `&`-pointer
test.rs:9 match *f {
^~
test.rs:10:14: 10:18 note: attempting to move value to here (to prevent the move, you can use `ref num1` to capture value by reference)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:10:20: 10:24 note: and here (use `ref num2`)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:11:14: 11:17 note: and here (use `ref num`)
test.rs:11 Foo2(num) => (),
^~~
```
Close#8064
This fixes the categorization of the upvars of procs (represented internally
as once fns) to consider usage to require a loan. In doing so, upvars are no
longer allowed to be moved out of repeatedly in loops and such.
Closes#10398Closes#12041Closes#12127
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
Apparently windows doesn't like reading from stdin with a large buffer size, and
it also apparently is ok with a smaller buffer size. This changes the reader
returned by stdin() to return an 8k buffered reader for stdin rather than a 64k
buffered reader.
Apparently libuv has run into this before, taking a peek at their code, with a
specific comment in their console code saying that "ReadConsole can't handle big
buffers", which I presume is related to invoking ReadFile as if it were a file
descriptor.
Closes#13304
Few places where previous version of tidy script cannot find XXX:
* inside one-line comment preceding by a few spaces;
* inside multiline comments (now it finds it if multiline comment starts
on the same line with XXX).
Change occurences of XXX found by new tidy script.
... also don't read the whole directory if the glob for that path
component doesn't contain any metacharacters.
Patterns like `../*.jpg` will work now, and `.*` will match both `.` and
`..` to be consistent with shell expansion.
As before: Just `*` still won't match `.` and `..`, while it will still
match dotfiles like `.git` by default.
`Reader`, `Writer`, `MemReader`, `MemWriter`, and `MultiWriter` now work with `Vec<u8>` instead of `~[u8]`. This does introduce some extra copies since `from_utf8_owned` isn't usable anymore, but I think that can't be helped until `~str`'s representation changes.
In the error message for when a private field is used, include the name of the struct, or if it's a struct-like enum variant, the names of the variant and the enum.
This fixes#13341.
Rust currently defaults to `RelocPIC` regardless. This patch adds a new
codegen option that allows choosing different relocation-model. The
available models are:
- default (Use the target-specific default model)
- static
- pic
- no-pic
For a more detailed information use `llc --help`
Rust currently defaults to `RelocPIC` regardless. This patch adds a new
codegen option that allows choosing different relocation-model. The
available models are:
- default (Use the target-specific default model)
- static
- pic
- no-pic
For a more detailed information use `llc --help`
In summary these are some example transitions this change makes:
'a || => ||: 'a
proc:Send() => proc():Send
The intended syntax for closures is to put the lifetime bound not at the front
but rather in the list of bounds. Currently there is no official support in the
AST for bounds that are not 'static, so this case is currently specially handled
in the parser to desugar to what the AST is expecting. Additionally, this moves
the bounds on procedures to the correct position, which is after the argument
list.
The current grammar for closures and procedures is:
procedure := 'proc' [ '<' lifetime-list '>' ] '(' arg-list ')'
[ ':' bound-list ] [ '->' type ]
closure := [ 'unsafe' ] ['<' lifetime-list '>' ] '|' arg-list '|'
[ ':' bound-list ] [ '->' type ]
lifetime-list := lifetime | lifetime ',' lifetime-list
arg-list := ident ':' type | ident ':' type ',' arg-list
bound-list := bound | bound '+' bound-list
bound := path | lifetime
This does not currently handle the << ambiguity in `Option<<'a>||>`, I am
deferring that to a later patch. Additionally, this removes the support for the
obsolete syntaxes of ~fn and &fn.
Closes#10553Closes#10767Closes#11209Closes#11210Closes#11211
This can be a frustrating error message, ideally we should print the signature mismatch, but hinting that it's a trait incompatibility helps tracking root cause. Also beefed up the testcases for this.
Ideally we would print the signature mismatch in the error helper?
rustc: move the check_loop pass earlier.
This pass is purely AST based, and by running it earlier we emit more
useful error messages, e.g. type inference fails in the case of
`let r = break;` with few constraints on `r`, but it's more useful to be told that
the `break` is outside the loop (rather than a type error) when it is.
Closes#13292.
Fix#13266.
There is a little bit of acrobatics in the definition of `crate_paths`
to avoid calling `clone()` on the dylib/rlib unless we actually are
going to need them.
The other oddity is that I have replaced the `root_ident: Option<&str>`
parameter with a `root: &Option<CratePaths>`, which may surprise one
who was expecting to see something like: `root: Option<&CratePaths>`.
I went with the approach here because I could not come up with code for
the alternative that was acceptable to the borrow checker.
All it checks, unfortunately, is that you actually printed at least
two lines for crateA paths and at least one line for crateB paths.
But that's enough to capture the spirit of the bug, I think. I did
not bother trying to verify that the paths themselves reflected where
the crates end up.
This pass is purely AST based, and by running it earlier we emit more
useful error messages, e.g. type inference fails in the case of `let r =
break;` with few constraints on `r`, but its more useful to be told that
the `break` is outside a loop (rather than a type error) when it is.
Closes#13292.
`RefCell::get` can be a bit surprising, because it actually clones the wrapped value. This removes `RefCell::get` and replaces all the users with `RefCell::borrow()` when it can, and `RefCell::borrow().clone()` when it can't. It removes `RefCell::set` for consistency. This closes#13182.
It also fixes an infinite loop in a test when debugging is on.
rustc: feature-gate `concat_idents!`.
concat_idents! is not as useful as it could be, due to macros only being
allowed in limited places, and hygiene, so lets feature gate it until we
make a decision about it.
cc #13294
This was missed when dropping the null-termination from our string
types. An explicit null byte can still be placed anywhere in a string if
desired, but there's no reason to stick one at the end of every string
constant.
concat_idents! is not as useful as it could be, due to macros only being
allowed in limited places, and hygiene, so lets feature gate it until we
make a decision about it.
cc #13294
This fixes#13238. It avoids an infinite loop when compiling
the tests with `-g`. Without this change, the debuginfo on
`black_box` prevents the method from being inlined, which
allows llvm to convert `silent_recurse` into a tail-call. This
then loops forever instead of consuming all the stack like it
is supposed to. This patch forces inlining `black_box`, which
triggers the right error.
It's surprising that `RefCell::get()` is implicitly doing a clone
on a value. This patch removes it and replaces all users with
either `.borrow()` when we can autoderef, or `.borrow().clone()`
when we cannot.
This was missed when dropping the null-termination from our string
types. An explicit null byte can still be placed anywhere in a string if
desired, but there's no reason to stick one at the end of every string
constant.
Closes#13285 (rustc: Stop using LLVMGetSectionName)
Closes#13280 (std: override clone_from for Vec.)
Closes#13277 (serialize: add a few missing pubs to base64)
Closes#13275 (Add and remove some ignore-win32 flags)
Closes#13273 (Removed managed boxes from libarena.)
Closes#13270 (Minor copy-editing for the tutorial)
Closes#13267 (fix Option<~ZeroSizeType>)
Closes#13265 (Update emacs mode to support new `#![inner(attribute)]` syntax.)
Closes#13263 (syntax: Remove AbiSet, use one Abi)
This commit tightens up the restriction on types used to index slices to require
exactly `uint` indices. Previously any integral type was accepted, but this
leads to a few subtle problems:
* 64-bit indices don't make much sense on 32-bit systems
* Signed indices for slices used as negative indexing isn't implemented
This was discussed at the recent work week, and also has some discussion on
issue #10453.
Closes#10453
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
The various ...Rng::new() methods can hit IO errors from the OSRng they use,
and it seems sensible to expose them at a higher level. Unfortunately, writing
e.g. `StdRng::new().unwrap()` gives a much poorer error message than if it
failed internally, but this is a problem with all `IoResult`s.
This commit deals with the fallout of the previous change by making tuples
structs have public fields where necessary (now that the fields are private by
default).
This is a continuation of the work done in #13184 to make struct fields private
by default. This commit finishes RFC 4 by making all tuple structs have private
fields by default. Note that enum variants are not affected.
A tuple struct having a private field means that it cannot be matched on in a
pattern match (both refutable and irrefutable), and it also cannot have a value
specified to be constructed. Similarly to private fields, switching the type of
a private field in a tuple struct should be able to be done in a backwards
compatible way.
The one snag that I ran into which wasn't mentioned in the RFC is that this
commit also forbids taking the value of a tuple struct constructor. For example,
this code now fails to compile:
mod a {
pub struct A(int);
}
let a: fn(int) -> a::A = a::A; //~ ERROR: first field is private
Although no fields are bound in this example, it exposes implementation details
through the type itself. For this reason, taking the value of a struct
constructor with private fields is forbidden (outside the containing module).
RFC: 0004-private-fields
`collections::list::List` was decided in a [team meeting](https://github.com/mozilla/rust/wiki/Meeting-weekly-2014-03-25) that it was unnecessary, so this PR removes it. Additionally, it removes an old and redundant purity test and fixes some warnings.
Only supports crate level statics. No debug info is generated for function level statics. Closes#9227.
As discussed at the end of the comments for #9227, I took an initial stab at adding support for function level statics and decided it would be enough work to warrant being split into a separate issue.
See #13144 for the new issue describing the need to add support for function level static variables.
r? @nikomatsakis
Fix#13140
Includes two fixes, and a semi-thorough regression test.
(There is another set of tests that I linked from #5121, but those are sort of all over the place, while the ones I've included here are more directly focused on the issues at hand.)
This removes the `attr` matcher and adds a `meta` matcher. The previous `attr`
matcher is now ambiguous because it doesn't disambiguate whether it means inner
attribute or outer attribute.
The new behavior can still be achieved by taking an argument of the form
`#[$foo:meta]` (the brackets are part of the macro pattern).
Closes#13067
Some unix platforms will send a SIGPIPE signal instead of returning EPIPE from a
syscall by default. The native runtime doesn't install a SIGPIPE handler,
causing the program to die immediately in this case. This brings the behavior in
line with libgreen by ignoring SIGPIPE and propagating EPIPE upwards to the
application in the form of an IoError.
Closes#13123
Some unix platforms will send a SIGPIPE signal instead of returning EPIPE from a
syscall by default. The native runtime doesn't install a SIGPIPE handler,
causing the program to die immediately in this case. This brings the behavior in
line with libgreen by ignoring SIGPIPE and propagating EPIPE upwards to the
application in the form of an IoError.
Closes#13123
It turns out that on linux, and possibly other platforms, child processes will
continue to accept signals until they have been *reaped*. This means that once
the child has exited, it will succeed to receive signals until waitpid() has
been invoked on it.
This is unfortunate behavior, and differs from what is seen on OSX and windows.
This commit changes the behavior of Process::signal() to be the same across
platforms, and updates the documentation of Process::kill() to note that when
signaling a foreign process it may accept signals until reaped.
Implementation-wise, this invokes waitpid() with WNOHANG before each signal to
the child to ensure that if the child has exited that we will reap it. Other
possibilities include installing a SIGCHLD signal handler, but at this time I
believe that that's too complicated.
Closes#13124
Summary:
So far, we've used the term POD "Plain Old Data" to refer to types that
can be safely copied. However, this term is not consistent with the
other built-in bounds that use verbs instead. This patch renames the Pod
kind into Copy.
RFC: 0003-opt-in-builtin-traits
Test Plan: make check
Reviewers: cmr
Differential Revision: http://phabricator.octayn.net/D3
This bench is meant to exercise libgreen, not libnative. It recently caused the
auto-linux-32-nopt-t bot to fail as no output was produced for an hour.
We really do *not* want TCO to kick in. If it does, we'll never blow the
stack, and never trigger the condition the test is checking for. To that end,
do a meaningless alloc that serves only to get a destructor to run. The
addition of nocapture/noalias seems to have let LLVM do more TCO, which
hurt this testcase.
The `_match.rs` takes advantage of passes prior to `trans` and
aggressively prunes the sub-match tree based on exact equality. When it
comes to literal or range, the strategy may lead to wrong result if
there's guard function or multiple patterns inside tuple.
Closes#12582.
Closes#13027.
The `_match.rs` takes advantage of passes prior to `trans` and
aggressively prunes the sub-match tree based on exact equality. When it
comes to literal or range, the strategy may lead to wrong result if
there's guard function or multiple patterns inside tuple.
Closes#12582.
Closes#13027.
The previous syntax was `Foo:Bound<trait-parameters>`, but this is a little
ambiguous because it was being parsed as `Foo: (Bound<trait-parameters)` rather
than `Foo: (Bound) <trait-parameters>`
This commit changes the syntax to `Foo<trait-parameters>: Bound` in order to be
clear where the trait parameters are going.
Closes#9265
This change prepares `rustc` to accept private fields by default. These changes will have to go through a snapshot before the rest of the changes can happen.
The previous syntax was `Foo:Bound<trait-parameters>`, but this is a little
ambiguous because it was being parsed as `Foo: (Bound<trait-parameters)` rather
than `Foo: (Bound) <trait-parameters>`
This commit changes the syntax to `Foo<trait-parameters>: Bound` in order to be
clear where the trait parameters are going.
Closes#9265
This bench is meant to exercise libgreen, not libnative. It recently caused the
auto-linux-32-nopt-t bot to fail as no output was produced for an hour.
It was possible to borrow unsafe static items in static initializers.
This patch implements a small `Visitor` that walks static initializer's
expressions and checks borrows aliasability.
Fixes#13005
cc @nikomatsakis r?
* Remove clone-ability from all primitives. All shared state will now come
from the usage of the primitives being shared, not the primitives being
inherently shareable. This allows for fewer allocations for stack-allocated
primitives.
* Add `Mutex<T>` and `RWLock<T>` which are stack-allocated primitives for purely
wrapping a piece of data
* Remove `RWArc<T>` in favor of `Arc<RWLock<T>>`
* Remove `MutexArc<T>` in favor of `Arc<Mutex<T>>`
* Shuffle around where things are located
* The `arc` module now only contains `Arc`
* A new `lock` module contains `Mutex`, `RWLock`, and `Barrier`
* A new `raw` module contains the primitive implementations of `Semaphore`,
`Mutex`, and `RWLock`
* The Deref/DerefMut trait was implemented where appropriate
* `CowArc` was removed, the functionality is now part of `Arc` and is tagged
with `#[experimental]`.
* The crate now has #[deny(missing_doc)]
* `Arc` now supports weak pointers
This is not a large-scale rewrite of the functionality contained within the
`sync` crate, but rather a shuffling of who does what an a thinner hierarchy of
ownership to allow for better composability.
This is the final nail in the coffin for the crate map. The `start` function for
libgreen now has a new added parameter which is the event loop factory instead
of inferring it from the crate map. The two current valid values for this
parameter are `green::basic::event_loop` and `rustuv::event_loop`.
Summary:
It was possible to borrow unsafe static items in static initializers.
This patch implements a small `Visitor` that walks static initializer's
expressions and checks borrows aliasability.
Fixes#13005
Test Plan: make check
Differential Revision: http://phabricator.octayn.net/D2
syntax: allow `trace_macros!` and `log_syntax!` in item position.
Previously
trace_macros!(true)
fn main() {}
would complain about `trace_macros` being an expression macro in item
position. This is a pointless limitation, because the macro is purely
compile-time, with no runtime effect. (And similarly for log_syntax.)
This also changes the behaviour of `trace_macros!` very slightly, it
used to be equivalent to
macro_rules! trace_macros {
(true $($_x: tt)*) => { true };
(false $($_x: tt)*) => { false }
}
I.e. you could invoke it with arbitrary trailing arguments, which were
ignored. It is changed to accept only exactly `true` or `false` (with no
trailing arguments) and expands to `()`.
std: remove the `equals` method from `TotalEq`.
`TotalEq` is now just an assertion about the `Eq` impl of a
type (i.e. `==` is a total equality if a type implements `TotalEq`) so
the extra method is just confusing.
Also, a new method magically appeared as a hack to allow deriving to
assert that the contents of a struct/enum are also TotalEq, because the
deriving infrastructure makes it very hard to do anything but create a
trait method. (You didn't hear about this horrible work-around from me
:(.)
`TotalEq` is now just an assertion about the `Eq` impl of a
type (i.e. `==` is a total equality if a type implements `TotalEq`) so
the extra method is just confusing.
Also, a new method magically appeared as a hack to allow deriving to
assert that the contents of a struct/enum are also TotalEq, because the
deriving infrastructure makes it very hard to do anything but create a
trait method. (You didn't hear about this horrible work-around from me
:(.)
Fixes#12992
Store compressed bitcode files in rlibs with a different extension. Compression doesn't interfere with --emit=bc.
Regression test compares outputs.
This needs to be removed as part of removing `~[T]`. Partial type hints
are now allowed, and will remove the need to add a version of this
method for `Vec<T>`. For now, this involves a few workarounds for
partial type hints not completely working.
The compiler will no longer inject libgreen as the default runtime for rust
programs, this commit switches it over to libnative by default. Now that
libnative has baked for some time, it is ready enough to start getting more
serious usage as the default runtime for rustc generated binaries.
We've found that there isn't really a correct decision in choosing a 1:1 or M:N
runtime as a default for all applications, but it seems that a larger number of
programs today would work more reasonable with a native default rather than a
green default.
With this commit come a number of bugfixes:
* The main native task is now named "<main>"
* The main native task has the stack bounds set up properly
* #[no_uv] was renamed to #[no_start]
* The core-run-destroy test was rewritten for both libnative and libgreen and
one of the tests was modified to be more robust.
* The process-detach test was locked to libgreen because it uses signal handling
Previously
trace_macros!(true)
fn main() {}
would complain about `trace_macros` being an expression macro in item
position. This is a pointless limitation, because the macro is purely
compile-time, with no runtime effect. (And similarly for log_syntax.)
This also changes the behaviour of `trace_macros!` very slightly, it
used to be equivalent to
macro_rules! trace_macros {
(true $($_x: tt)*) => { true };
(false $($_x: tt)*) => { false }
}
I.e. you could invoke it with arbitrary trailing arguments, which were
ignored. It is changed to accept only exactly `true` or `false` (with no
trailing arguments) and expands to `()`.
In Rust, the strongest guarantee that `&mut` provides is that the memory
pointed to is *not aliased*, whereas `&`'s guarantees are much weaker:
that the value can be aliased, and may be mutated under proper precautions
(interior mutability).
Our atomics though use `&mut` for mutation even while creating multiple
aliases, so this changes them to use 'interior mutability', mutating
through immutable references.
Previously, any library of the pattern `lib<name>-<hash>-<version>.so` was
>considered a candidate (rightly so) for loading a crate. Sets are generated for
each unique `<hash>`, and then from these sets a candidate is selected. If a set
contained more than one element, then it immediately generated an error saying
that multiple copies of the same dylib were found.
This is incorrect because each candidate needs to be validated to actually
contain a rust library (valid metadata). This commit alters the logic to filter
each set of candidates for a hash to only libraries which are actually rust
libraries. This means that if multiple false positives are found with the right
name pattern, they're all ignored.
Closes#13010
`Share` implies that all *reachable* content is *threadsafe*.
Threadsafe is defined as "exposing no operation that permits a data race if multiple threads have access to a &T pointer simultaneously". (NB: the type system should guarantee that if you have access to memory via a &T pointer, the only other way to gain access to that memory is through another &T pointer)...
Fixes#11781
cc #12577
What this PR will do
================
- [x] Add Share kind and
- [x] Replace usages of Freeze with Share in bounds.
- [x] Add Unsafe<T> #12577
- [x] Forbid taking the address of a immutable static item with `Unsafe<T>` interior
What's left to do in a separate PR (after the snapshot)?
===========================================
- Remove `Freeze` completely
Previously, any library of the pattern `lib<name>-<hash>-<version>.so` was
>considered a candidate (rightly so) for loading a crate. Sets are generated for
each unique `<hash>`, and then from these sets a candidate is selected. If a set
contained more than one element, then it immediately generated an error saying
that multiple copies of the same dylib were found.
This is incorrect because each candidate needs to be validated to actually
contain a rust library (valid metadata). This commit alters the logic to filter
each set of candidates for a hash to only libraries which are actually rust
libraries. This means that if multiple false positives are found with the right
name pattern, they're all ignored.
Closes#13010
It appears that the --as-needed flag to linkers will not pull in a dynamic library unless it satisfies a non weak undefined symbol. The linkage1 test was creating a dynamic library where it was only used for a weak-symbol as part of an executable, so the dynamic library was getting discarded.
This commit adds another symbol to the library which satisfies a strong undefined symbol, so the library is pulled in to resolve the weak reference.
This is adequate because when a function has a type that isn't caught here,
that is, it has a single argument, but it *isn't* `&mut BenchHarness`, it
errors later on with:
error: mismatched types: expected `fn(&mut test::BenchHarness)` but found
`fn(int)` (expected &-ptr but found int)
which I consider acceptable.
Closes#12997
This PR enables the use of mutable slices in *mutable* static items. The work was started by @xales and I added a follow-up commit that moves the *immutable* restriction to the recently added `check_static`
Closes#11411
its a common (yet easily fixable) error to just forget parens at the end of getter-like methods without any arguments.
The current error message for that case asks for an anonymous function, this patch adds a note asking for either an anonymous function, or for trailing parens.
This is my first contribution! do i need to do anything else?
This commit switches over the backtrace infrastructure from piggy-backing off
the RUST_LOG environment variable to using the RUST_BACKTRACE environment
variable (logging is now disabled in libstd).
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
This commit shreds all remnants of libextra from the compiler and standard
distribution. Two modules, c_vec/tempfile, were moved into libstd after some
cleanup, and the other modules were moved to separate crates as seen fit.
Closes#8784Closes#12413Closes#12576
This commit shreds all remnants of libextra from the compiler and standard
distribution. Two modules, c_vec/tempfile, were moved into libstd after some
cleanup, and the other modules were moved to separate crates as seen fit.
Closes#8784Closes#12413Closes#12576
Previously, the cfg attribute `cfg(not(a, b))` was translated to `(!a && !b)`,
but this isn't very useful because that can already be expressed as
`cfg(not(a), not(b))`. This commit changes the translation to `!(a && b)` which
is more symmetrical of the rest of the `cfg` attribute.
Put another way, I would expect `cfg(clause)` to be the opposite of
`cfg(not(clause))`, but this is not currently the case with multiple element
clauses.
Fix a test that was missed in the chan/port renaming (PR #12815). This was missed because it is skipped on linux and windows, and the mac bots were moving at the time the PR landed.
# Summary
This patch introduces the `_` token into the type grammar, with the meaning "infer this type".
With this change, the following two lines become equivalent:
```
let x = foo();
let x: _ = foo();
```
But due to its composability, it enables partial type hints like this:
```
let x: Bar<_> = baz();
```
Using it on the item level is explicitly forbidden, as the Rust language does not enable global type inference by design.
This implements the feature requested in https://github.com/mozilla/rust/issues/9508.
# Things requiring clarification
- The change to enable it is very small, but I have only limited understanding of the related code, so the approach here might be wrong.
- In particular, while this patch works, it does so in a way not originally intended according to the code comments.
- This probably needs more tests, or rather feedback for which tests are still missing.
- I'm unsure how this interacts with lifetime parameters, and whether it is correct in regard to them.
- Partial type hints on the right side of `as` like `&foo as *_` work in both a normal function contexts and in constexprs like `static foo: *int = &'static 123 as *_`. The question is whether this should be allowed in general.
# Todo for this PR
- The manual and tutorial still needs updating.
# Bugs I'm unsure how to fix
- Requesting inference for the top level of the right hand side of a `as` fails to infer correctly, even if all possible hints are given:
```
.../type_hole_1.rs:35:18: 35:22 error: the type of this value must be known in this context
.../type_hole_1.rs:35 let a: int = 1u32 as _;
^~~~
```
lint: add lint for use of a `~[T]`.
This is useless at the moment (since pretty much every crate uses
`~[]`), but should help avoid regressions once completely removed from a
crate.
## read+write modifier '+'
This small sugar was left out in the original implementation (#5359).
When an output operand with the '+' modifier is encountered, we store the index of that operand alongside the expression to create and append an input operand later. The following lines are equivalent:
```
asm!("" : "+m"(expr));
asm!("" : "=m"(expr) : "0"(expr));
```
## misplaced options and clobbers give a warning
It's really annoying when a small typo might change behavior without any warning.
```
asm!("mov $1, $0" : "=r"(x) : "r"(8u) : "cc" , "volatile");
//~^ WARNING expected a clobber, but found an option
```
## liveness
Fixed incorrect order of propagation.
Sometimes it caused spurious warnings in code: `warning: value assigned to `i` is never read, #[warn(dead_assignment)] on by default`
~~Note: Rebased on top of another PR. (uses other changes)~~
* [x] Implement read+write
* [x] Warn about misplaced options
* [x] Fix liveness (`dead_assignment` lint)
* [x] Add all tests
For the following code snippet:
```rust
struct Foo { bar: int }
fn foo1(x: &Foo) -> &int {
&x.bar
}
```
This PR generates the following error message:
```rust
test.rs:2:1: 4:2 note: consider using an explicit lifetime parameter as shown: fn foo1<'a>(x: &'a Foo) -> &'a int
test.rs:2 fn foo1(x: &Foo) -> &int {
test.rs:3 &x.bar
test.rs:4 }
test.rs:3:5: 3:11 error: cannot infer an appropriate lifetime for borrow expression due to conflicting requirements
test.rs:3 &x.bar
^~~~~~
```
Currently it does not support methods.
Whenever a failure happens, if a program is run with
`RUST_LOG=std::rt::backtrace` a backtrace will be printed to the task's stderr
handle. Stack traces are uncondtionally printed on double-failure and
rtabort!().
This ended up having a nontrivial implementation, and here's some highlights of
it:
* We're bundling libbacktrace for everything but OSX and Windows
* We use libgcc_s and its libunwind apis to get a backtrace of instruction
pointers
* On OSX we use dladdr() to go from an instruction pointer to a symbol
* On unix that isn't OSX, we use libbacktrace to get symbols
* Windows, as usual, has an entirely separate implementation
Lots more fun details and comments can be found in the source itself.
Closes#10128
Whenever a failure happens, if a program is run with
`RUST_LOG=std::rt::backtrace` a backtrace will be printed to the task's stderr
handle. Stack traces are uncondtionally printed on double-failure and
rtabort!().
This ended up having a nontrivial implementation, and here's some highlights of
it:
* We're bundling libbacktrace for everything but OSX and Windows
* We use libgcc_s and its libunwind apis to get a backtrace of instruction
pointers
* On OSX we use dladdr() to go from an instruction pointer to a symbol
* On unix that isn't OSX, we use libbacktrace to get symbols
* Windows, as usual, has an entirely separate implementation
Lots more fun details and comments can be found in the source itself.
Closes#10128
Most IO related functions return an IoResult so that the caller can handle failure in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all supress errors. This means that code that needs to handle errors can't use any of these iterators. All three of these iterators were updated to produce IoResults.
Fixes#12368
If a TTY fails to get initialized, it still needs to have uv_close invoked on
it. This fixes the problem by constructing the TtyWatcher struct before the call
to uv_tty_init. The struct has a destructor on it which will close the handle
properly.
Closes#12666
Most IO related functions return an IoResult so that the caller can handle failure
in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all
supress errors. This means that code that needs to handle errors can't use any of these
iterators. All three of these iterators were updated to produce IoResults.
Fixes#12368
If a TTY fails to get initialized, it still needs to have uv_close invoked on
it. This fixes the problem by constructing the TtyWatcher struct before the call
to uv_tty_init. The struct has a destructor on it which will close the handle
properly.
Closes#12666
The `~str` type is not long for this world as it will be superseded by the
soon-to-come DST changes for the language. The new type will be
`~Str`, and matching over the allocation will no longer be supported.
Matching on `&str` will continue to work, in both a pre and post DST world.
Closes#12803 (std: Relax an assertion in oneshot selection) r=brson
Closes#12818 (green: Fix a scheduler assertion on yielding) r=brson
Closes#12819 (doc: discuss try! in std::io) r=alexcrichton
Closes#12820 (Use generic impls for `Hash`) r=alexcrichton
Closes#12826 (Remove remaining nolink usages) r=alexcrichton
Closes#12835 (Emacs: always jump the cursor if needed on indent) r=brson
Closes#12838 (Json method cleanup) r=alexcrichton
Closes#12843 (rustdoc: whitelist the headers that get a § on hover) r=alexcrichton
Closes#12844 (docs: add two unlisted libraries to the index page) r=pnkfelix
Closes#12846 (Added a test that checks that unary structs can be mutably borrowed) r=sfackler
Closes#12847 (mk: Fix warnings about duplicated rules) r=nmatsakis
Some types of error are caused by missing lifetime parameter on function
or method declaration. In such cases, this commit generates some
suggestion about what the function declaration could be. This does not
support method declaration yet.
Fix issue #5121: Add proper support for early/late distinction for lifetime bindings.
There are some little refactoring cleanups as separate commits; the real meat that has the actual fix is in the final commit.
The original author of the work was @nikomatsakis; I have reviewed it, revised it slightly, refactored it into these separate commits, and done some rebasing work.
This is needed to make progress on #10296 as the default bounds will no longer
include Send. I believe that this was the originally intended syntax for procs,
and it just hasn't been necessary up until now.
This is needed to make progress on #10296 as the default bounds will no longer
include Send. I believe that this was the originally intended syntax for procs,
and it just hasn't been necessary up until now.
This should be called far less than it is because it does expensive OS
interactions and seeding of the internal RNG, `task_rng` amortises this
cost. The main problem is the name is so short and suggestive.
The direct equivalent is `StdRng::new`, which does precisely the same
thing.
The deprecation will make migrating away from the function easier.
This functionality is not super-core and so doesn't need to be included
in std. It's possible that std may need rand (it does a little bit now,
for io::test) in which case the functionality required could be moved to
a secret hidden module and reexposed by librand.
Unfortunately, using #[deprecated] here is hard: there's too much to
mock to make it feasible, since we have to ensure that programs still
typecheck to reach the linting phase.
The `-g` flag does not take an argument anymore while the argument to `--debuginfo` becomes mandatory. This change makes it possible again to run the compiler like this:
`rustc -g ./file.rs`
This did not work before because `./file.rs` was misinterpreted as the argument to `-g`. In order to get limited debuginfo, one now has to use `--debuginfo=1`.
It is often convenient to have forms of weak linkage or other various types of
linkage. Sadly, just using these flavors of linkage are not compatible with
Rust's typesystem and how it considers some pointers to be non-null.
As a compromise, this commit adds support for weak linkage to external symbols,
but it requires that this is only placed on extern statics of type `*T`.
Codegen-wise, we get translations like:
```rust
// rust code
extern {
#[linkage = "extern_weak"]
static foo: *i32;
}
// generated IR
@foo = extern_weak global i32
@_some_internal_symbol = internal global *i32 @foo
```
All references to the rust value of `foo` then reference `_some_internal_symbol`
instead of the symbol `_foo` itself. This allows us to guarantee that the
address of `foo` will never be null while the value may sometimes be null.
An example was implemented in `std::rt::thread` to determine if
`__pthread_get_minstack()` is available at runtime, and a test is checked in to
use it for a static value as well. Function pointers a little odd because you
still need to transmute the pointer value to a function pointer, but it's
thankfully better than not having this capability at all.
Thanks to @bnoordhuis for the original patch, most of this work is still his!
It is often convenient to have forms of weak linkage or other various types of
linkage. Sadly, just using these flavors of linkage are not compatible with
Rust's typesystem and how it considers some pointers to be non-null.
As a compromise, this commit adds support for weak linkage to external symbols,
but it requires that this is only placed on extern statics of type `*T`.
Codegen-wise, we get translations like:
// rust code
extern {
#[linkage = "extern_weak"]
static foo: *i32;
}
// generated IR
@foo = extern_weak global i32
@_some_internal_symbol = internal global *i32 @foo
All references to the rust value of `foo` then reference `_some_internal_symbol`
instead of the symbol `_foo` itself. This allows us to guarantee that the
address of `foo` will never be null while the value may sometimes be null.
An example was implemented in `std::rt::thread` to determine if
`__pthread_get_minstack()` is available at runtime, and a test is checked in to
use it for a static value as well. Function pointers a little odd because you
still need to transmute the pointer value to a function pointer, but it's
thankfully better than not having this capability at all.
In the "reverse-complement" loop, if there is an odd number of element,
we forget to complement the element in the middle. For example, if the
input is "ggg", the result before the fix is "CgC" instead of "CCC".
This is because of this bug that the official shootout says that the rust
version is in "Bad Output". This commit should fix this error.
Where ItemDecorator creates new items given a single item, ItemModifier
alters the tagged item in place. The expansion rules for this are a bit
weird, but I think are the most reasonable option available.
When an item is expanded, all ItemModifier attributes are stripped from
it and the item is folded through all ItemModifiers. At that point, the
process repeats until there are no ItemModifiers in the new item.
Closes#1433. Implemented after suggestion by @cmr in #12323
This is slightly less flexible than the implementation in #12323 (binary and octal floats aren't supported, nor are underscores in the literal), but is cleaner in that it doesn't modify the core grammar, or require odd syntax for the number itself. The missing features could be added back with relatively little effort (the main awkwardness is parsing the string. Is there a good approach for this in the stdlib currently?)
- Repurposes `MoveData.assignee_ids` to mean only `=` but not `+=`, so
that borrowck effectively classifies all expressions into assignees,
uses or both.
- Removes two `span_err` in liveness analysis, which are now borrowck's
responsibilities.
Closes#12527.
* `Ord` inherits from `Eq`
* `TotalOrd` inherits from `TotalEq`
* `TotalOrd` inherits from `Ord`
* `TotalEq` inherits from `Eq`
This is a partial implementation of #12517.
This PR brings back limited debuginfo which allows for nice backtraces and breakpoints, but omits any info about variables and types.
The `-g` and `--debuginfo` command line options have been extended to take an optional argument:
`-g0` means no debug info.
`-g1` means line-tables only.
`-g2` means full debug info.
Specifying `-g` without argument is equivalent to `-g2`.
Fixes#12280
When using tasks in Rust, the expectation is that the runtime does not exit
before all tasks have exited. This is enforced in libgreen through the
`SchedPool` type, and it is enforced in libnative through a `bookkeeping` module
and a global count/mutex pair. Unfortunately, this means that a process which
originates with libgreen will not wait for spawned native tasks.
In order to fix this problem, the bookkeeping module was moved from libnative to
libstd so the runtime itself can wait for native tasks to exit. Green tasks do
not manage themselves through this bookkeeping module, but native tasks will
continue to manage themselves through this module.
Closes#12684
Closes#8506.
The `trans::adt` code for statics uses fields with `C_undef` values to
insert alignment padding (because LLVM's own alignment padding isn't
always sufficient for aggregate constants), and assumes that all fields
in the actual Rust value are represented by non-undef LLVM values, to
distinguish them from that padding.
But for nullable pointer enums, if non-null variant has fields other
than the pointer used as the discriminant, they would be set to undef in
the null case, to reflect that they're never accessed.
To avoid the obvious conflict between these two items, the latter undefs
were wrapped in unary LLVM structs to distinguish them from the former
undefs. Except this doesn't actually work -- LLVM, not unreasonably,
treats the "wrapped undef" as a regular undef.
So this commit just sets all fields to null in the null pointer case of
a nullable pointer enum static, because the other fields don't really
need to be undef in the first place.
When the timer_helper thread exited, it would attempt to re-acquire the global
task count mutex, but the mutex had previously been deallocated, leading to
undefined behavior of the mutex, and in some cases deadlock.
Another mutex is used to coordinate shutting down the timer helper thread.
Closes#12699
I added a new lint for variables whose names contain uppercase characters, since, by convention, variable names should be all lowercase. What motivated me to work on this was when I ran into something like the following:
```rust
use std::io::File;
use std::io::IoError;
fn main() {
let mut f = File::open(&Path::new("/something.txt"));
let mut buff = [0u8, ..16];
match f.read(buff) {
Ok(cnt) => println!("read this many bytes: {}", cnt),
Err(IoError{ kind: EndOfFile, .. }) => println!("Got end of file: {}", EndOfFile.to_str()),
}
}
```
I then got compile errors when I tried to add a wildcard match pattern at the end which I found very confusing since I believed that the 2nd match arm was only matching the EndOfFile condition. The problem is that I hadn't imported io::EndOfFile into the local scope. So, I thought that I was using EndOfFile as a sub-pattern, however, what I was actually doing was creating a new local variable named EndOfFile. This lint makes this error easier to spot by providing a warning that the variable name EndOfFile contains a uppercase characters which provides a nice hint as to why the code isn't doing what is intended.
The lint warns on local bindings as well:
```rust
let Hi = 0;
```
And also struct fields:
```rust
struct Something {
X: uint
}
```
Linker argument order with respect to libraries is important enough that we
shouldn't be attempting to filter out libraries getting passed through to the
linker. When linking with a native library that has multiple dependant native
libraries, it's useful to have control over the link argument order.
- Added `TraitObject` representation to `std::raw`.
- Added doc to `std::raw`.
- Removed `Any::as_void_ptr()` and `Any::as_mut_void_ptr()`
methods as they are uneccessary now after the removal of
headers on owned boxes. This reduces the number of virtual calls needed.
- Made the `..Ext` implementations work directly with the repr of
a trait object.
- Removed `Any`-related traits from the prelude.
- Added bench for `Any`
A couple of syntax extensions manually expanded expressions, but it
wasn't done universally, most noticably inside of asm!().
There's also a bit of random cleanup.
When the metadata format changes, old libraries often cause librustc to abort
when reading their metadata. This should all change with the introduction of SVH
markers, but the loader for crates should gracefully handle libraries without
SVH markers still.
This commit adds support for tripping fewer assertions when loading libraries by
using maybe_get_doc when initially parsing metadata. It's still possible for
some libraries to fall through the cracks, but this should deal with a fairly
large number of them up front.
When the metadata format changes, old libraries often cause librustc to abort
when reading their metadata. This should all change with the introduction of SVH
markers, but the loader for crates should gracefully handle libraries without
SVH markers still.
This commit adds support for tripping fewer assertions when loading libraries by
using maybe_get_doc when initially parsing metadata. It's still possible for
some libraries to fall through the cracks, but this should deal with a fairly
large number of them up front.
Now that we can call `flush()` in destructors, I think that it's appropriate for stdout/stderr to return buffered writers by default.
This doesn't enable certain functionality like a buffered stdin does, but it's what you want 90% of the time for performance reasons.
Similarly to #12422 which made stdin buffered by default, this commit makes the
output streams also buffered by default. Now that buffered writers will flush
their contents when they are dropped, I don't believe that there's no reason why
the output shouldn't be buffered by default, which is what you want in 90% of
cases.
As with stdin, there are new stdout_raw() and stderr_raw() functions to get
unbuffered streams to stdout/stderr.
We weren't passing the node id for the enum and hence it couldn't retrieve the field types for the struct variant we were trying to destructure.
Fixes#11577.
From my comment on #11450:
The reason for the ICE is because for operators `rustc` does a little bit of magic. Notice that while you implement the `Mul` trait for some type `&T` (i.e a reference to some T), you can simply do `Vec2 {..} * 2.0f32`. That is, `2.0f32` is `f32` and not `&f32`. This works because `rustc` will automatically take a reference. So what's happening is that with `foo * T`, the compiler is expecting the `mul` method to take some `&U` and then it can compare to make sure `T == U` (or more specifically that `T` coerces to `U`). But in this case, the argument of the `mul` method is not a reference and hence the "no ref" error.
I don't think we should ICE in this case since we do catch the mismatched trait/impl method and hence provide a better error message that way.
Fixes#11450
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
Previously, format!("{a}{b}", a=foo(), b=bar()) has foo() and bar() run in a
nondeterminisc order. This is clearly a non-desirable property, so this commit
uses iteration over a list instead of iteration over a hash map to provide
deterministic code generation of these format arguments.
This new SVH is used to uniquely identify all crates as a snapshot in time of
their ABI/API/publicly reachable state. This current calculation is just a hash
of the entire crate's AST. This is obviously incorrect, but it is currently the
reality for today.
This change threads through the new Svh structure which originates from crate
dependencies. The concept of crate id hash is preserved to provide efficient
matching on filenames for crate loading. The inspected hash once crate metadata
is opened has been changed to use the new Svh.
The goal of this hash is to identify when upstream crates have changed but
downstream crates have not been recompiled. This will prevent the def-id drift
problem where upstream crates were recompiled, thereby changing their metadata,
but downstream crates were not recompiled.
In the future this hash can be expanded to exclude contents of the AST like doc
comments, but limitations in the compiler prevent this change from being made at
this time.
Closes#10207
These are types that are in exported type signatures, but are not
exported themselves, e.g.
struct Foo { ... }
pub fn bar() -> Foo { ... }
will warn about the Foo.
Such types are not listed in documentation, and cannot be named outside
the crate in which they are declared, which is very user-unfriendly.
cc #10573
Closes#12546 (Add new target 'make dist-osx' to create a .pkg installer for OS X) r=brson
Closes#12575 (rustc: Move local native libs back in link-args) r=brson
Closes#12587 (Provide a more helpful error for tests that fail due to noexec) r=brson
Closes#12589 (rustc: Remove codemap and reachable from metadata encoder) r=alexcrichton
Closes#12591 (Fix syntax::ext::deriving{,::*} docs formatting.) r=huonw
Closes#12592 (Miscellaneous Vim improvements) r=alexcrichton
Closes#12596 (path: Implement windows::make_non_verbatim()) r=alexcrichton
Closes#12598 (Improve the ctags function regular expression) r=alexcrichton
Closes#12599 (Tutorial improvement (new variant of PR #12472).) r=pnkfelix
Closes#12603 (std: Export the select! macro) r=pcwalton
Closes#12605 (Fix typo in doc of Binary trait in std::fmt) r=alexcrichton
Closes#12613 (Fix bytepos_to_file_charpos) r=brson
This PR includes:
- Create an iterator for ```List<T>``` called ```Items<T>```;
- Move all list operations inside ```List<T>``` impl;
- Removed functions that are already provided by ```Iterator``` trait;
- Refactor on ```len()``` and ```is_empty``` using ```Container``` trait;
- Bunch of minor fixes;
A replacement for using @ is intended, but still in discussion.
Closes#12344.
With linkers on unix systems, libraries on the right of the command line are
used to resolve symbols in those on the left of the command line. This means
that arguments must have a right-to-left dependency chain (things on the left
depend on things on the right).
This is currently done by ordering the linker arguments as
1. Local object
2. Local native libraries
3. Upstream rust libraries
4. Upstream native libraries
This commit swaps the order of 2 and 3 so upstream rust libraries have access to
local native libraries. It has been seen that some upstream crates don't specify
the library that they link to because the name varies per platform (e.g.
lua/glfw/etc).
This commit enables building these libraries by allowing the upstream rust crate
to have access to local native libraries. I believe that the failure mode for
this scheme is when an upstream rust crate depends on a symbol in an upstream
library which is then redefined in a local library. This failure mode is
incredibly uncommon, and the failure mode also varies per platform (OSX behaves
differently), so I believe that a change like this is fine to make.
Closes#12446
- For each *mutable* static item, check that the **type**:
- cannot own any value whose type has a dtor
- cannot own any values whose type is an owned pointer
- For each *immutable* static item, check that the **value**:
- does not contain any ~ or box expressions
(including ~[1, 2, 3] sort of things)
- does not contain a struct literal or call to an enum
variant / struct constructor where
- the type of the struct/enum has a dtor
The pretty printer was treating block comments with more than two
asterisks after the first slash (e.g. `/***`) as doc comments (which are
attributes), whereas in actual fact they are just regular comments.
Linker argument order with respect to libraries is important enough that we
shouldn't be attempting to filter out libraries getting passed through to the
linker. When linking with a native library that has multiple dependant native
libraries, it's useful to have control over the link argument order.
The printing of the error message on stack overflow had two sometimes false
assumptions previously. The first is that a local task was always available (it
called Local::take) and the second is that it used `println!` instead of
manually writing.
The first assumption isn't necessarily true because while stack overflow will
likely only be detected in situations that a local task is available, it's not
guaranteed to always be in TLS. For example, during a `println!` call a task
may be blocking, causing it to be unavailable. By using Local::try_take(), we
can be resilient against these occurrences.
The second assumption could lead to odd behavior because the stdout logger can
be overwritten to run arbitrary code. Currently this should be possible, but the
utility is much diminished because a stack overflow translates to an abort()
instead of a failure.
The printing of the error message on stack overflow had two sometimes false
assumptions previously. The first is that a local task was always available (it
called Local::take) and the second is that it used println! instead of
manually writing.
The first assumption isn't necessarily true because while stack overflow will
likely only be detected in situations that a local task is available, it's not
guaranteed to always be in TLS. For example, during a println! call a task
may be blocking, causing it to be unavailable. By using Local::try_take(), we
can be resilient against these occurrences.
The second assumption could lead to odd behavior because the stdout logger can
be overwritten to run arbitrary code. Currently this should be possible, but the
utility is much diminished because a stack overflow translates to an abort()
instead of a failure.
This updates a number of ignore-test tests, and removes a few completely
outdated tests due to the feature being tested no longer being supported.
This brings a number of bench/shootout tests up to date so they're compiling
again. I make no claims to the performance of these benchmarks, it's just nice
to not have bitrotted code.
Closes#2604Closes#9407
Apparently weak linkage and dlopen aren't quite working out for applications
like servo on android. There appears to be a bug or two in how android loads
dynamic libraries and for some reason libservo.so isn't being found.
As a temporary solution, add an extern "C" function to libstd which can be
called if you have a handle to the crate map manually. When crawling the crate
map, we then check this manual symbol before falling back to the old solutions.
cc #11731
This updates a number of ignore-test tests, and removes a few completely
outdated tests due to the feature being tested no longer being supported.
This brings a number of bench/shootout tests up to date so they're compiling
again. I make no claims to the performance of these benchmarks, it's just nice
to not have bitrotted code.
Closes#2604Closes#9407
This patch series does a couple things:
* replaces manual `Hash` implementations with `#[deriving(Hash)]`
* adds `Hash` back to `std::prelude`
* minor cleanup of whitespace and variable names.
In its first pass, namely gather_loans, the borrow checker tracks the
initialization sites among other things it does. It does so for let
bindings with initializers but not for bindings in match arms, which are
effectively also assignments. This patch does that for borrow checker.
Closes#12452.
They are still are not completely correct, since it does not handle
graphemes at all, just codepoints, but at least it handles the common
case correctly.
The calculation was previously very wrong (rather than just a little bit
wrong): it wasn't accounting for the fact that every character is 1
byte, and so multibyte characters were pretending to be zero width.
cc #8706
file.
Previously multibyte UTF-8 chars were being recorded as byte offsets
from the start of the file, and then later compared against global byte
positions, resulting in the compiler possibly thinking it had a byte
position pointing inside a multibyte character, if there were multibyte
characters in any non-crate files. (Although, sometimes the byte offsets
line up just right to not ICE, but that was a coincidence.)
Fixes#11136.
Fixes#11178.
* compile-fail/vec-add.rs is obsolete, there are no mutable
vectors any more, #2711 is closed
* compile-fail/issue-1451.rs is obsolete, there are no more
structural records, #1451 is closed
* compile-fail/issue-2074.rs is obsolete, an up to date test
is in run-pass/nested-enum-same-names.rs, #2074 is closed
* compile-fail/omitted-arg-wrong-types.rs is obsolete, #2093
is closed
This commit implements a layman's version of realpath() for metadata::loader to
use in order to not error on symlinks pointing to the same file.
Closes#12459
This commit removes deriving(ToStr) in favor of deriving(Show), migrating all impls of ToStr to fmt::Show.
Most of the details can be found in the first commit message.
Closes#12477
The std::run module is a relic from a standard library long since past, and
there's not much use to having two modules to execute processes with where one
is slightly more convenient. This commit merges the two modules, moving lots of
functionality from std::run into std::io::process and then deleting
std::run.
New things you can find in std::io::process are:
* Process::new() now only takes prog/args
* Process::configure() takes a ProcessConfig
* Process::status() is the same as run::process_status
* Process::output() is the same as run::process_output
* I/O for spawned tasks is now defaulted to captured in pipes instead of ignored
* Process::kill() was added (plus an associated green/native implementation)
* Process::wait_with_output() is the same as the old finish_with_output()
* destroy() is now signal_exit()
* force_destroy() is now signal_kill()
Closes#2625Closes#10016
The std::run module is a relic from a standard library long since past, and
there's not much use to having two modules to execute processes with where one
is slightly more convenient. This commit merges the two modules, moving lots of
functionality from std::run into std::io::process and then deleting
std::run.
New things you can find in std::io::process are:
* Process::new() now only takes prog/args
* Process::configure() takes a ProcessConfig
* Process::status() is the same as run::process_status
* Process::output() is the same as run::process_output
* I/O for spawned tasks is now defaulted to captured in pipes instead of ignored
* Process::kill() was added (plus an associated green/native implementation)
* Process::wait_with_output() is the same as the old finish_with_output()
* destroy() is now signal_exit()
* force_destroy() is now signal_kill()
Closes#2625Closes#10016
This commit changes the ToStr trait to:
impl<T: fmt::Show> ToStr for T {
fn to_str(&self) -> ~str { format!("{}", *self) }
}
The ToStr trait has been on the chopping block for quite awhile now, and this is
the final nail in its coffin. The trait and the corresponding method are not
being removed as part of this commit, but rather any implementations of the
`ToStr` trait are being forbidden because of the generic impl. The new way to
get the `to_str()` method to work is to implement `fmt::Show`.
Formatting into a `&mut Writer` (as `format!` does) is much more efficient than
`ToStr` when building up large strings. The `ToStr` trait forces many
intermediate allocations to be made while the `fmt::Show` trait allows
incremental buildup in the same heap allocated buffer. Additionally, the
`fmt::Show` trait is much more extensible in terms of interoperation with other
`Writer` instances and in more situations. By design the `ToStr` trait requires
at least one allocation whereas the `fmt::Show` trait does not require any
allocations.
Closes#8242Closes#9806
Makes labelled loops hygiene by performing renaming of the labels defined in e.g. `'x: loop { ... }` and then used in break and continue statements within loop body so that they act hygienically when used with macros.
Closes#12262.
Makes labelled loops hygiene by performing renaming of the labels
defined in e.g. `'x: loop { ... }` and then used in break and continue
statements within loop body so that they act hygienically when used with
macros.
Closes#12262.
This adds simple syntax highlighting based off libsyntax's lexer to be sure to
stay up to date with rust's grammar. Some of the highlighting is a bit ad-hoc,
but it definitely seems to get the job done!
This currently doesn't highlight rustdoc-rendered function signatures and
structs that are emitted to each page because the colors already signify what's
clickable and I think we'd have to figure out a different scheme before
colorizing them. This does, however, colorize all code examples and source code.
Closes#11393
With the stability attributes we can put public-but unstable modules next to others, so this moves `intrinsics` and `raw` out of the `unstable` module (and marks both as `#[experimental]`).
These two containers are indeed collections, so their place is in
libcollections, not in libstd. There will always be a hash map as part of the
standard distribution of Rust, but by moving it out of the standard library it
makes libstd that much more portable to more platforms and environments.
This conveniently also removes the stuttering of 'std::hashmap::HashMap',
although 'collections::HashMap' is only one character shorter.
This adds simple syntax highlighting based off libsyntax's lexer to be sure to
stay up to date with rust's grammar. Some of the highlighting is a bit ad-hoc,
but it definitely seems to get the job done!
This currently doesn't highlight rustdoc-rendered function signatures and
structs that are emitted to each page because the colors already signify what's
clickable and I think we'd have to figure out a different scheme before
colorizing them. This does, however, colorize all code examples and source code.
Closes#11393
This PR merges `IterBytes` and `Hash` into a trait that allows for generic non-stream-based hashing. It makes use of @eddyb's default type parameter support in order to have a similar usage to the old `Hash` framework.
Fixes#8038.
Todo:
- [x] Better documentation
- [ ] Benchmark
- [ ] Parameterize `HashMap` on a `Hasher`.
Fixes#12350.
Parentheses around assignment statements such as
```rust
let mut a = (0);
a = (1);
a += (2);
```
are not necessary and therefore an unnecessary_parens warning is raised when
statements like this occur.
NOTE: In `let` declarations this does not work as intended. Is it possible that they do not count as assignment expressions (`ExprAssign`)? (edit: this is fixed by now)
Furthermore, there are some cases that I fixed in the rest of the code, where parentheses could potentially enhance readability. Compare these lines:
```rust
a = b == c;
a = (b == c);
```
Thus, after having worked on this I'm not entirely sure, whether we should go through with this patch or not. Probably a matter of debate. ;)
Not all of those messages are covered by tests. I am not sure how to trigger them and where to put those tests.
Also some message patterns in the existing tests are not complete.
For example, i find `error: mismatched types: expected "i32" but found "char" (expected i32 but found char)` a bit repetitive, but as i can see there is no test covering that.
Closes#12366.
Parentheses around assignment statements such as
let mut a = (0);
a = (1);
a += (2);
are not necessary and therefore an unnecessary_parens warning is raised when
statements like this occur.
The warning mechanism was refactored along the way to allow for code reuse
between the routines for checking expressions and statements.
Code had to be adopted throughout the compiler and standard libraries to comply
with this modification of the lint.
Travis CI provides an easy-to-use continuous integration infrastructure for
github repos to use. Travis will automatically test all PRs which are opened
against the rust repository, informing PR owners of the test results.
I believe that this will be a very convenient piece of infrastructure as we'll
be able to reduce the load on bors quite a bit. In theory all PRs opened have
had the full test suite run against them, but unfortunately this is rarely the
case (I'm a prime suspect). Travis will be able to provide easy and relatively
quick (~30min) feedback for PRs. By ensuring fewer failures on bors, we can
hopefully feed more successful jobs to bors.
Overall, I expect this to be very helpful for new contributors as well as
regular contributors as it's another layer of tests being run which will
hopefully catch things sooner. One of the most convenient parts about using
Travis is that there's very little burden in terms of maintenance, and if things
go wrong we can easily turn travis completely off.
Note that this is *not* the metric by which a PR will be merged with. Using
travis will purely be another source for running tests, we will continue to gate
all PRs on bors.
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.
This patch merges IterBytes and Hash traits, which clears up the
confusion of using `#[deriving(IterBytes)]` to support hashing.
Instead, it now is much easier to use the new `#[deriving(Hash)]`
for making a type hashable with a stream hash.
Furthermore, it supports custom non-stream-based hashers, such as
if a value's hash was cached in a database.
This does not yet replace the old IterBytes-hash with this new
version.
This is PR is the beginning of a complete rewrite and ultimate removal of the `std::num::strconv` module (see #6220), and the removal of the `ToStrRadix` trait in favour of using the `std::fmt` functionality directly. This should make for a cleaner API, encourage less allocation, and make the implementation more comprehensible .
The `Formatter::{pad_integral, with_padding}` methods have also been refactored make things easier to understand.
The formatting tests for integers have been moved out of `run-pass/ifmt.rs` in order to provide more immediate feedback when building using `make check-stage2-std NO_REBUILD=1`.
Arbitrary radixes are now easier to use in format strings. For example:
~~~rust
assert_eq!(format!("{:04}", radix(3, 2)), ~"0011");
~~~
The benchmarks have been standardised between `std::num::strconv` and `std::num::fmt` to make it easier to compare the performance of the different implementations.
~~~
type | radix | std::num::strconv | std::num::fmt
======|=======|========================|======================
int | bin | 1748 ns/iter (+/- 150) | 321 ns/iter (+/- 25)
int | oct | 706 ns/iter (+/- 53) | 179 ns/iter (+/- 22)
int | dec | 640 ns/iter (+/- 59) | 207 ns/iter (+/- 10)
int | hex | 637 ns/iter (+/- 77) | 205 ns/iter (+/- 19)
int | 36 | 446 ns/iter (+/- 30) | 309 ns/iter (+/- 20)
------|-------|------------------------|----------------------
uint | bin | 1724 ns/iter (+/- 159) | 322 ns/iter (+/- 13)
uint | oct | 663 ns/iter (+/- 25) | 175 ns/iter (+/- 7)
uint | dec | 613 ns/iter (+/- 30) | 186 ns/iter (+/- 6)
uint | hex | 519 ns/iter (+/- 44) | 207 ns/iter (+/- 20)
uint | 36 | 418 ns/iter (+/- 16) | 308 ns/iter (+/- 32)
~~~
This works towards a complete rewrite and ultimate removal of the `std::num::strconv` module (see #6220), and the removal of the `ToStrRadix` trait in favour of using the `std::fmt` functionality directly. This should make for a cleaner API, encourage less allocation, and make the implementation far more comprehensible.
The `Formatter::pad_integral` method has also been refactored make it easier to understand.
The formatting tests for integers have been moved out of `run-pass/ifmt.rs` in order to provide more immediate feedback when building using `make check-stage2-std NO_REBUILD=1`.
The benchmarks have been standardised between std::num::strconv and std::num::fmt to make it easier to compare the performance of the different implementations.
Arbitrary radixes are now easier to use in format strings. For example:
~~~
assert_eq!(format!("{:04}", radix(3, 2)), ~"0011");
~~~
Previously an `unsafe` block created by the compiler (like those in the
formatting macros) would be "ignored" if surrounded by `unsafe`, that
is, the internal unsafety would be being legitimised by the external
block:
unsafe { println!("...") } =(expansion)=> unsafe { ... unsafe { ... } }
And the code in the inner block would be using the outer block, making
it considered used (and the inner one considered unused).
This patch forces the compiler to create a new unsafe context for
compiler generated blocks, so that their internal unsafety doesn't
escape to external blocks.
Fixes#12418.
Added allow(non_camel_case_types) to librustc where necesary
Tried to fix problems with non_camel_case_types outside rustc
fixed failing tests
Docs updated
Moved #[allow(non_camel_case_types)] a level higher.
markdown.rs reverted
Fixed timer that was failing tests
Fixed another timer
Travis CI provides an easy-to-use continuous integration infrastructure for
github repos to use. Travis will automatically test all PRs which are opened
against the rust repository, informing PR owners of the test results.
I believe that this will be a very convenient piece of infrastructure as we'll
be able to reduce the load on bors quite a bit. In theory all PRs opened have
had the full test suite run against them, but unfortunately this is rarely the
case (I'm a prime suspect). Travis will be able to provide easy and relatively
quick (~30min) feedback for PRs. By ensuring fewer failures on bors, we can
hopefully feed more successful jobs to bors.
Overall, I expect this to be very helpful for new contributors as well as
regular contributors as it's another layer of tests being run which will
hopefully catch things sooner. One of the most convenient parts about using
Travis is that there's very little burden in terms of maintenance, and if things
go wrong we can easily turn travis completely off.
Note that this is *not* the metric by which a PR will be merged with. Using
travis will purely be another source for running tests, we will continue to gate
all PRs on bors.
This commit rewrites crate loading internally in attempt to look at less
metadata and provide nicer errors. The loading is now split up into a few
stages:
1. Collect a mapping of (hash => ~[Path]) for a set of candidate libraries for a
given search. The hash is the hash in the filename and the Path is the
location of the library in question. All candidates are filtered based on
their prefix/suffix (dylib/rlib appropriate) and then the hash/version are
split up and are compared (if necessary).
This means that if you're looking for an exact hash of library you don't have
to open up the metadata of all libraries named the same, but also in your
path.
2. Once this mapping is constructed, each (hash, ~[Path]) pair is filtered down
to just a Path. This is necessary because the same rlib could show up twice
in the path in multiple locations. Right now the filenames are based on just
the crate id, so this could be indicative of multiple version of a crate
during one crate_id lifetime in the path. If multiple duplicate crates are
found, an error is generated.
3. Now that we have a mapping of (hash => Path), we error on multiple versions
saying that multiple versions were found. Only if there's one (hash => Path)
pair do we actually return that Path and its metadata.
With this restructuring, it restructures code so errors which were assertions
previously are now first-class errors. Additionally, this should read much less
metadata with lots of crates of the same name or same version in a path.
Closes#11908
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.