Fix typo in `keyword` docs for traits
This PR fixes a small typo in the `keyword_docs.rs` file, describing the differences between the 2015 and 2018 editions of traits.
They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
Drop support for all cloudabi targets
`cloudabi` is a tier-3 target, and [it is no longer being maintained upstream][no].
This PR drops supports for cloudabi targets. Those targets are:
* aarch64-unknown-cloudabi
* armv7-unknown-cloudabi
* i686-unknown-cloudabi
* x86_64-unknown-cloudabi
Since this drops supports for a target, I'd like somebody to tag `relnotes` label to this PR.
Some other issues:
* The tidy exception for `cloudabi` crate is still remained because
* `parking_lot v0.9.0` and `parking_lot v0.10.2` depends on `cloudabi v0.0.3`.
* `parking_lot v0.11.0` depends on `cloudabi v0.1.0`.
[no]: https://github.com/NuxiNL/cloudabi#note-this-project-is-unmaintained
Stabilize `IpAddr::is_ipv4` and `is_ipv6` as const
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `std::net::IpAddr` as const, in the same way as [PR#76198](https://github.com/rust-lang/rust/pull/76198).
Possible because of the recent stabilization of const control flow.
Part of #76225 and #76205.
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `IpAddr`.
Possible because of the recent stabilization of const control flow.
Also adds a test for these methods in a const context.
Do what write does and optimize for the most likely case:
slices are much smaller than the buffer. If a slice does not fit
completely in the remaining capacity of the buffer, it is left out
rather than buffered partially. Special treatment is only left for
oversized slices that are written directly to the underlying writer.
Now that BufWriter always claims to support vectored writes,
look through it at the wrapped writer to decide whether to
use vectored writes for LineWriter.
If the underlying writer does not support efficient vectored output,
do it differently: always try to coalesce the slices in the buffer
until one comes that does not fit entirely. Flush the buffer before
the first slice if needed.
Stabilize clamp
Tracking issue: https://github.com/rust-lang/rust/issues/44095
Clamp has been merged and unstable for about a year and a half now. How do we feel about stabilizing this?
std: Update the bactrace crate submodule
This commit updates the `library/backtrace` submodule which primarily
pulls in support for split-debuginfo on macOS, avoiding the need for
`dsymutil` to get run to get line numbers and filenames in backtraces.
rustc_expand: Mark inner `#![test]` attributes as soft-unstable
Custom inner attributes are feature gated (https://github.com/rust-lang/rust/issues/54726) except for attributes having name `test` literally, which are not gated for historical reasons.
`#![test]` is an inner proc macro attribute, so it has all the issues described in https://github.com/rust-lang/rust/issues/54726 too.
This PR gates it with the `soft_unstable` lint.
This commit updates the `library/backtrace` submodule which primarily
pulls in support for split-debuginfo on macOS, avoiding the need for
`dsymutil` to get run to get line numbers and filenames in backtraces.
unix/weak: pass arguments to syscall at the given type
Given that we know the type the argument should have, it seems a bit strange not to use that information.
r? `@m-ou-se` `@cuviper`
Add lint for panic!("{}")
This adds a lint that warns about `panic!("{}")`.
`panic!(msg)` invocations with a single argument use their argument as panic payload literally, without using it as a format string. The same holds for `assert!(expr, msg)`.
This lints checks if `msg` is a string literal (after expansion), and warns in case it contained braces. It suggests to insert `"{}", ` to use the message literally, or to add arguments to use it as a format string.
This lint is also a good starting point for adding warnings about `panic!(not_a_string)` later, once [`panic_any()`](https://github.com/rust-lang/rust/pull/74622) becomes a stable alternative.
Fix typo in `std::io::Write` docs
These referred to a “`Write`er”—extra *e*. Presumably a copy-paste
holdover from “`Read`er”.
Test Plan:
Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results.
wchargin-branch: io-write-docs
Tighten the bounds on atomic Ordering in std::sys::unix::weak::Weak
This moves reading this from multiple SeqCst reads to Relaxed read + Acquire fence if we are actually going to use the data.
Would love to avoid the Acquire fence, but doing so would need Ordering::Consume, which neither Rust, nor LLVM supports (a shame, since this fence is hardly free on ARM, which is what I was hoping to improve).
r? ``@Amanieu`` (Sorry for always picking you, but I know a lot of people wouldn't feel comfortable reviewing atomic ordering changes)
linux: try to use libc getrandom to allow interposition
We'll try to use a weak `getrandom` symbol first, because that allows
things like `LD_PRELOAD` interposition. For example, perf measurements
might want to disable randomness to get reproducible results. If the
weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
Updated the list of white-listed target features for x86
This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and [adds all that are detectable at run-time in Rust stable as of 1.27.0](https://github.com/rust-lang/stdarch/blob/master/crates/std_detect/src/detect/arch/x86.rs).
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
The reference for LLVM's feature names used is [this file](https://github.com/llvm/llvm-project/blob/master/llvm/include/llvm/Support/X86TargetParser.def).
This PR was motivated as the compiler end's part for allowing #67329 to be adressed over on rust-lang/stdarch
These referred to a “`Write`er”—extra *e*. Presumably a copy-paste
holdover from “`Read`er”.
Test Plan:
Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results.
wchargin-branch: io-write-docs
Rollup of 9 pull requests
Successful merges:
- #77939 (Ensure that the source code display is working with DOS backline)
- #78138 (Upgrade dlmalloc to version 0.2)
- #78967 (Make codegen tests compatible with extra inlining)
- #79027 (Limit storage duration of inlined always live locals)
- #79077 (document that __rust_alloc is also magic to our LLVM fork)
- #79088 (clarify `span_label` documentation)
- #79097 (Code block invalid html tag lint)
- #79105 (std: Fix test `symlink_hard_link` on Windows)
- #79107 (build-manifest: strip newline from rustc version)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
std: Fix test `symlink_hard_link` on Windows
The test was introduced in https://github.com/rust-lang/rust/pull/78026 and fails depending on Windows version and admin rights.
Other similar tests check for symlink creation permissions before doing anything, this PR performs the same check for `symlink_hard_link` as well.
Upgrade dlmalloc to version 0.2
In preparation of adding dynamic memory management support for SGXv2-enabled platforms, the dlmalloc crate has been refactored. More specifically, support has been added to implement platform specification outside of the dlmalloc crate. (see https://github.com/alexcrichton/dlmalloc-rs/pull/15)
This PR upgrades dlmalloc to version 0.2 for the `wasm` and `sgx` targets.
As the dlmalloc changes have received a positive review, but have not been merged yet, this PR contains a commit to prevent tidy from aborting CI prematurely.
cc: `@jethrogb`
Make the libstd build script smaller
Of all sysroot crates currently only compiler_builtins, miniz_oxide and std require a build script. compiler_builtins uses to conditionally enable certain features and possibly compile a C version ([source](63ccaf11f0/build.rs)), miniz_oxide only uses it to detect if liballoc is supported as the MSRV is 1.34.0 instead of the 1.36.0 which stabilized liballoc ([source](28514ec09f/miniz_oxide/build.rs)). std now only uses it to enable `freebsd12` when the `RUST_STD_FREEBSD_12_ABI` env var is set, to determine if `restricted-std` should be set, to set the `STD_ENV_ARCH` env var identical to `CARGO_CFG_TARGET_ARCH`, and to unconditionally enable `backtrace_in_libstd`.
If all build scripts were to be removed, it would be possible for rustc to completely compile it's own sysroot. It currently requires a rustc version that already has an available libstd to compile the build scripts. If rustc can completely compile it's own sysroot, rustbuild could be simplified to not forcefully use the bootstrap compiler for build scripts.
`@rustbot` modify labels: +T-compiler +libs-impl
We'll try to use a weak `getrandom` symbol first, because that allows
things like `LD_PRELOAD` interposition. For example, perf measurements
might want to disable randomness to get reproducible results. If the
weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
Simplify output capturing
This is a sequence of incremental improvements to the unstable/internal `set_panic` and `set_print` mechanism used by the `test` crate:
1. Remove the `LocalOutput` trait and use `Arc<Mutex<dyn Write>>` instead of `Box<dyn LocalOutput>`. In practice, all implementations of `LocalOutput` were just `Arc<Mutex<..>>`. This simplifies some logic and removes all custom `Sink` implementations such as `library/test/src/helpers/sink.rs`. Also removes a layer of indirection, as the outermost `Box` is now gone. It also means that locking now happens per `write_fmt`, not per individual `write` within. (So `"{} {}\n"` now results in one `lock()`, not four or more.)
2. Since in all cases the `dyn Write`s were just `Vec<u8>`s, replace the type with `Arc<Mutex<Vec<u8>>>`. This simplifies things more, as error handling and flushing can be removed now. This also removes the hack needed in the default panic handler to make this work with `::realstd`, as (unlike `Write`) `Vec<u8>` is from `alloc`, not `std`.
3. Replace the `RefCell`s by regular `Cell`s. The `RefCell`s were mostly used as `mem::replace(&mut *cell.borrow_mut(), something)`, which is just `Cell::replace`. This removes an unecessary bookkeeping and makes the code a bit easier to read.
4. Merge `set_panic` and `set_print` into a single `set_output_capture`. Neither the test crate nor rustc (the only users of this feature) have a use for using these separately. Merging them simplifies things even more. This uses a new function name and feature name, to make it clearer this is internal and not supposed to be used by other crates.
Might be easier to review per commit.
Rename/Deprecate LayoutErr in favor of LayoutError
Implements rust-lang/wg-allocators#73.
This patch renames LayoutErr to LayoutError, and uses a type alias to support users using the old name.
The new name will be instantly stable in release 1.49 (current nightly), the type alias will become deprecated in release 1.51 (so that when the current nightly is 1.51, 1.49 will be stable).
This is the only error type in `std` that ends in `Err` rather than `Error`, if this PR lands all stdlib error types will end in `Error` 🥰
Fix an intrinsic invocation on threaded wasm
This looks like it was forgotten to get updated in #74482 and wasm with
threads isn't built on CI so we didn't catch this by accident.
specialize io::copy to use copy_file_range, splice or sendfile
Fixes#74426.
Also covers #60689 but only as an optimization instead of an official API.
The specialization only covers std-owned structs so it should avoid the problems with #71091
Currently linux-only but it should be generalizable to other unix systems that have sendfile/sosplice and similar.
There is a bit of optimization potential around the syscall count. Right now it may end up doing more syscalls than the naive copy loop when doing short (<8KiB) copies between file descriptors.
The test case executes the following:
```
[pid 103776] statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=17, ...}) = 0
[pid 103776] write(4, "wxyz", 4) = 4
[pid 103776] write(4, "iklmn", 5) = 5
[pid 103776] copy_file_range(3, NULL, 4, NULL, 5, 0) = 5
```
0-1 `stat` calls to identify the source file type. 0 if the type can be inferred from the struct from which the FD was extracted
𝖬 `write` to drain the `BufReader`/`BufWriter` wrappers. only happen when buffers are present. 𝖬 ≾ number of wrappers present. If there is a write buffer it may absorb the read buffer contents first so only result in a single write. Vectored writes would also be an option but that would require more invasive changes to `BufWriter`.
𝖭 `copy_file_range`/`splice`/`sendfile` until file size, EOF or the byte limit from `Take` is reached. This should generally be *much* more efficient than the read-write loop and also have other benefits such as DMA offload or extent sharing.
## Benchmarks
```
OLD
test io::tests::bench_file_to_file_copy ... bench: 21,002 ns/iter (+/- 750) = 6240 MB/s [ext4]
test io::tests::bench_file_to_file_copy ... bench: 35,704 ns/iter (+/- 1,108) = 3671 MB/s [btrfs]
test io::tests::bench_file_to_socket_copy ... bench: 57,002 ns/iter (+/- 4,205) = 2299 MB/s
test io::tests::bench_socket_pipe_socket_copy ... bench: 142,640 ns/iter (+/- 77,851) = 918 MB/s
NEW
test io::tests::bench_file_to_file_copy ... bench: 14,745 ns/iter (+/- 519) = 8889 MB/s [ext4]
test io::tests::bench_file_to_file_copy ... bench: 6,128 ns/iter (+/- 227) = 21389 MB/s [btrfs]
test io::tests::bench_file_to_socket_copy ... bench: 13,767 ns/iter (+/- 3,767) = 9520 MB/s
test io::tests::bench_socket_pipe_socket_copy ... bench: 26,471 ns/iter (+/- 6,412) = 4951 MB/s
```
Previously EOVERFLOW handling was only applied for io::copy specialization
but not for fs::copy sharing the same code.
Additionally we lower the chunk size to 1GB since we have a user report
that older kernels may return EINVAL when passing 0x8000_0000
but smaller values succeed.
Android builds use feature level 14, the libc wrapper for splice is gated
on feature level 21+ so we have to invoke the syscall directly.
Additionally the emulator doesn't seem to support it so we also have to
add ENOSYS checks.
Update thread and futex APIs to work with Emscripten
This updates the thread and futex APIs in `std` to match the APIs exposed by
Emscripten. This allows threads to run on `wasm32-unknown-emscripten` and the
thread parker to compile without errors related to the missing `futex` module.
To make use of this, Rust code must be compiled with `-C target-feature=atomics`
and Emscripten must link with `-pthread`.
I have confirmed this works well locally when building multithreaded crates.
Attempting to enable `std` thread tests currently fails for seemingly obscure
reasons and Emscripten is currently disabled in CI, so further work is needed to
have proper test coverage here.
This updates the thread and futex APIs in `std` to match the APIs exposed by
Emscripten. This allows threads to run on `wasm32-unknown-emscripten` and the
thread parker to compile without errors related to the missing `futex` module.
To make use of this, Rust code must be compiled with `-C target-feature=atomics`
and Emscripten must link with `-pthread`.
I have confirmed this works well locally when building multithreaded crates.
Attempting to enable `std` thread tests currently fails for seemingly obscure
reasons and Emscripten is currently disabled in CI, so further work is needed to
have proper test coverage here.
Duration::zero() -> Duration::ZERO
In review for #72790, whether or not a constant or a function should be favored for `#![feature(duration_zero)]` was seen as an open question. In https://github.com/rust-lang/rust/issues/73544#issuecomment-691701670 an invitation was opened to either stabilize the methods or propose a switch to the constant value, supplemented with reasoning. Followup comments suggested community preference leans towards the const ZERO, which would be reason enough.
ZERO also "makes sense" beside existing associated consts for Duration. It is ever so slightly awkward to have a series of constants specifying 1 of various units but leave 0 as a method, especially when they are side-by-side in code. It seems unintuitive for the one non-dynamic value (that isn't from Default) to be not-a-const, which could hurt discoverability of the associated constants overall. Elsewhere in `std`, methods for obtaining a constant value were even deprecated, as seen with [std::u32::min_value](https://doc.rust-lang.org/std/primitive.u32.html#method.min_value).
Most importantly, ZERO costs less to use. A match supports a const pattern, but const fn can only be used if evaluated through a const context such as an inline `const { const_fn() }` or a `const NAME: T = const_fn()` declaration elsewhere. Likewise, while https://github.com/rust-lang/rust/issues/73544#issuecomment-691949373 notes `Duration::zero()` can optimize to a constant value, "can" is not "will". Only const contexts have a strong promise of such. Even without that in mind, the comment in question still leans in favor of the constant for simplicity. As it costs less for a developer to use, may cost less to optimize, and seems to have more of a community consensus for it, the associated const seems best.
r? ```@LukasKalbertodt```
The discussion seems to have resolved that this lint is a bit "noisy" in
that applying it in all places would result in a reduction in
readability.
A few of the trivial functions (like `Path::new`) are fine to leave
outside of closures.
The general rule seems to be that anything that is obviously an
allocation (`Box`, `Vec`, `vec![]`) should be in a closure, even if it
is a 0-sized allocation.
It was only ever used with Vec<u8> anyway. This simplifies some things.
- It no longer needs to be flushed, because that's a no-op anyway for
a Vec<u8>.
- Writing to a Vec<u8> never fails.
- No #[cfg(test)] code is needed anymore to use `realstd` instead of
`std`, because Vec comes from alloc, not std (like Write).
Define `fs::hard_link` to not follow symlinks.
POSIX leaves it [implementation-defined] whether `link` follows symlinks.
In practice, for example, on Linux it does not and on FreeBSD it does.
So, switch to `linkat`, so that we can pick a behavior rather than
depending on OS defaults.
Pick the option to not follow symlinks. This is somewhat arbitrary, but
seems the less surprising choice because hard linking is a very
low-level feature which requires the source and destination to be on
the same mounted filesystem, and following a symbolic link could end
up in a different mounted filesystem.
[implementation-defined]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/link.html
Refactor `get_first_two_components` to `get_next_component`.
Fixes the following behaviour of `parse_prefix`:
- series of separator bytes in a prefix are correctly parsed as a single separator
- device namespace prefixes correctly recognize both `\\` and `/` as separators
Use Intra-doc links for std::io::buffered
Helps with #75080. I used the implicit link style for intrinsics, as that was what `minnumf32` and others already had.
``@rustbot`` modify labels: T-doc, A-intra-doc-links
r? ``@jyn514``
`#![deny(unsafe_op_in_unsafe_fn)]` in sys/hermit
Partial fix of #73904.
This encloses ``unsafe`` operations in ``unsafe fn`` in ``sys/hermit``.
Some unsafe blocks are not well documented because some system-based functions lack documents.
Partially fix#55002, deprecate in another release
Co-authored-by: Ashley Mannix <kodraus@hey.com>
Update stable version for stabilize_spin_loop
Co-authored-by: Joshua Nelson <joshua@yottadb.com>
Use better example for spinlock
As suggested by KodrAus
Remove renamed_spin_loop already available in master
Fix spin loop example
fix various aliasing issues in the standard library
This fixes various cases where the standard library either used raw pointers after they were already invalidated by using the original reference again, or created raw pointers for one element of a slice and used it to access neighboring elements.
Add note to process::arg[s] that args shouldn't be escaped or quoted
This came out of discussion on [forum](https://users.rust-lang.org/t/how-to-get-full-output-from-command/50626), where I recently asked a question and it turned out that the problem was redundant quotation:
```rust
Command::new("rg")
.arg("\"pattern\"") // this will look for "pattern" with quotes included
```
This is something that has bitten me few times already (in multiple languages actually), so It'd be grateful to have it in the docs, even though it's not sctrictly Rust specific problem. Other users also agreed.
This can be really annoying to debug, because in many cases (inluding mine), quotes can be legal part of the argument, so the command doesn't fail, it just behaves unexpectedly. Not everybody (including me) knows that quotes around arguments are part of the shell and not part of the called program. Coincidentally, somoene had the same problem [yesterday](https://www.reddit.com/r/rust/comments/jkxelc/going_crazy_over_running_a_curl_process_from_rust/) on reddit.
I am not a native speaker, so I welcome any corrections or better formulation, I don't expect this to be merged as is. I was also reminded that this is platform/shell specific behaviour, but I didn't find a good way to formulate that briefly, any ideas welcome.
It's also my first PR here, so I am not sure I did everything correctly, I did this just from Github UI.
make exp_m1 and ln_1p examples more representative of use
With this PR, the examples for `exp_m1` would fail if `x.exp() - 1.0` is used instead of `x.exp_m1()`, and the examples for `ln_1p` would fail if `(x + 1.0).ln()` is used instead of `x.ln_1p()`.
Add std::panic::panic_any.
The discussion of #67984 lead to the conclusion that there should be a macro or function separate from `std::panic!()` for throwing arbitrary payloads, to make it possible to deprecate or disallow (in edition 2021) `std::panic!(arbitrary_payload)`.
Alternative names:
- `panic_with!(..)`
- ~~`start_unwind(..)`~~ (panicking doesn't always unwind)
- `throw!(..)`
- `panic_throwing!(..)`
- `panic_with_value(..)`
- `panic_value(..)`
- `panic_with(..)`
- `panic_box(..)`
- `panic(..)`
The equivalent (private, unstable) function in `libstd` is called `std::panicking::begin_panic`.
I suggest `panic_any`, because it allows for any (`Any + Send`) type.
_Tracking issue: #78500_
Uplift `temporary-cstring-as-ptr` lint from `clippy` into rustc
The general consensus seems to be that this lint covers a common enough mistake to warrant inclusion in rustc.
The diagnostic message might need some tweaking, as I'm not sure the use of second-person perspective matches the rest of rustc, but I'd like to hear others' thoughts on that.
(cc #53224).
r? `@oli-obk`
Capture output from threads spawned in tests
This is revival of #75172.
Original text:
> Fixes#42474.
>
> r? `@dtolnay` since you expressed interest in this, but feel free to redirect if you aren't the right person anymore.
---
Closes#75172.
Updated the added documentation in llvm_util.rs to note which copies of LLVM need to be inspected.
Removed avx512bf16 and avx512vp2intersect because they are unsupported before LLVM 9 with the build with external LLVM 8 being supported
Re-introduced detection testing previously removed for un-requestable features tsc and mmx
`#[deny(unsafe_op_in_unsafe_fn)]` in sys/wasm
This is part of #73904.
This encloses unsafe operations in unsafe fn in `libstd/sys/wasm`.
@rustbot modify labels: F-unsafe-block-in-unsafe-fn
`movbe` seems to not be a run-time detectable feature on x86.
It has thus been removed from the list.
It was only commented out to ease comparison against the full list.
This PR both adds in-source documentation on what to look out for
when adding a new (X86) feature set and adds all that are detectable at run-time in Rust stable
as of 1.27.0.
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
replace `#[allow_internal_unstable]` with `#[rustc_allow_const_fn_unstable]` for `const fn`s
`#[allow_internal_unstable]` is currently used to side-step feature gate and stability checks.
While it was originally only meant to be used only on macros, its use was expanded to `const fn`s.
This pr adds stricter checks for the usage of `#[allow_internal_unstable]` (only on macros) and introduces the `#[rustc_allow_const_fn_unstable]` attribute for usage on `const fn`s.
This pr does not change any of the functionality associated with the use of `#[allow_internal_unstable]` on macros or the usage of `#[rustc_allow_const_fn_unstable]` (instead of `#[allow_internal_unstable]`) on `const fn`s (see https://github.com/rust-lang/rust/issues/69399#issuecomment-712911540).
Note: The check for `#[rustc_allow_const_fn_unstable]` currently only validates that the attribute is used on a function, because I don't know how I would check if the function is a `const fn` at the place of the check. I therefore openend this as a 'draft pull request'.
Closesrust-lang/rust#69399
r? @oli-obk
