rust/doc/tutorial.md

% The Rust Language Tutorial

Introduction

Rust is a programming language with a focus on type safety, memory safety, concurrency and performance. It is intended for writing large-scale, high-performance software that is free from several classes of common errors. Rust has a sophisticated memory model that encourages efficient data structures and safe concurrency patterns, forbidding invalid memory accesses that would otherwise cause segmentation faults. It is statically typed and compiled ahead of time.

As a multi-paradigm language, Rust supports writing code in procedural, functional and object-oriented styles. Some of its pleasant high-level features include:

• Type inference. Type annotations on local variable declarations are optional.
• Safe task-based concurrency. Rust's lightweight tasks do not share memory, instead communicating through messages.
• Higher-order functions. Efficient and flexible closures provide iteration and other control structures
• Pattern matching and algebraic data types. Pattern matching on Rust's enumeration types (a more powerful version of C's enums, similar to algebraic data types in functional languages) is a compact and expressive way to encode program logic.
• Polymorphism. Rust has type-parametric functions and types, type classes and OO-style interfaces.

Scope

This is an introductory tutorial for the Rust programming language. It covers the fundamentals of the language, including the syntax, the type system and memory model, generics, and modules. Additional tutorials cover specific language features in greater depth.

This tutorial assumes that the reader is familiar with the basic concepts of programming, and has programmed in one or more other languages before. We will often compare Rust to other languages, particularly those in the C family.

Conventions

Throughout the tutorial, language keywords and identifiers defined in example code are displayed in code font.

Code snippets are indented, and also shown in a monospaced font. Not all snippets constitute whole programs. For brevity, we'll often show fragments of programs that don't compile on their own. To try them out, you might have to wrap them in fn main() { ... }, and make sure they don't contain references to names that aren't actually defined.

Warning: Rust is a language under ongoing development. Notes about potential changes to the language, implementation deficiencies, and other caveats appear offset in blockquotes.

Getting started

The Rust compiler currently must be built from a tarball, unless you are on Windows, in which case using the installer is recommended.

Since the Rust compiler is written in Rust, it must be built by a precompiled "snapshot" version of itself (made in an earlier state of development). As such, source builds require a connection to the Internet, to fetch snapshots, and an OS that can execute the available snapshot binaries.

Snapshot binaries are currently built and tested on several platforms:

• Windows (7, Server 2008 R2), x86 only
• Linux (various distributions), x86 and x86-64
• OSX 10.6 ("Snow Leopard") or greater, x86 and x86-64

You may find that other platforms work, but these are our "tier 1" supported build environments that are most likely to work.

Note: Windows users should read the detailed "getting started" notes on the wiki. Even when using the binary installer, the Windows build requires a MinGW installation, the precise details of which are not discussed here. Finally, rustc may need to be referred to as rustc.exe. It's a bummer, I know.

To build from source you will also need the following prerequisite packages:

• g++ 4.4 or clang++ 3.x
• python 2.6 or later (but not 3.x)
• perl 5.0 or later
• gnu make 3.81 or later
• curl

If you've fulfilled those prerequisites, something along these lines should work.

$ curl -O http://dl.rust-lang.org/dist/rust-0.4.tar.gz
$ tar -xzf rust-0.4.tar.gz
$ cd rust-0.4
$ ./configure
$ make && make install

You may need to use sudo make install if you do not normally have permission to modify the destination directory. The install locations can be adjusted by passing a --prefix argument to configure. Various other options are also supported: pass --help for more information on them.

When complete, make install will place several programs into /usr/local/bin: rustc, the Rust compiler; rustdoc, the API-documentation tool, and cargo, the Rust package manager.

Compiling your first program

Rust program files are, by convention, given the extension .rs. Say we have a file hello.rs containing this program:

fn main() {
    io::println("hello? yes, this is rust");
}

If the Rust compiler was installed successfully, running rustc hello.rs will produce an executable called hello (or hello.exe on Windows) which, upon running, will likely do exactly what you expect.

The Rust compiler tries to provide useful information when it encounters an error. If you introduce an error into the program (for example, by changing io::println to some nonexistent function), and then compile it, you'll see an error message like this:

hello.rs:2:4: 2:16 error: unresolved name: io::print_with_unicorns
hello.rs:2     io::print_with_unicorns("hello? yes, this is rust");
               ^~~~~~~~~~~~~~~~~~~~~~~

In its simplest form, a Rust program is a .rs file with some types and functions defined in it. If it has a main function, it can be compiled to an executable. Rust does not allow code that's not a declaration to appear at the top level of the file: all statements must live inside a function. Rust programs can also be compiled as libraries, and included in other programs.

Editing Rust code

There are vim highlighting and indentation scripts in the Rust source distribution under src/etc/vim/. There is an emacs mode under src/etc/emacs/ called rust-mode, but do read the instructions included in that directory. In particular, if you are running emacs 24, then using emacs's internal package manager to install rust-mode is the easiest way to keep it up to date. There is also a package for Sublime Text 2, available both standalone and through Sublime Package Control, and support for Kate under src/etc/kate.

There is ctags support via src/etc/ctags.rust, but many other tools and editors are not yet supported. If you end up writing a Rust mode for your favorite editor, let us know so that we can link to it.

Syntax basics

Assuming you've programmed in any C-family language (C++, Java, JavaScript, C#, or PHP), Rust will feel familiar. Code is arranged in blocks delineated by curly braces; there are control structures for branching and looping, like the familiar if and while; function calls are written myfunc(arg1, arg2); operators are written the same and mostly have the same precedence as in C; comments are again like C.

The main surface difference to be aware of is that the condition at the head of control structures like if and while do not require parentheses, while their bodies must be wrapped in braces. Single-statement, unbraced bodies are not allowed.

# fn recalibrate_universe() -> bool { true }
fn main() {
    /* A simple loop */
    loop {
        // A tricky calculation
        if recalibrate_universe() {
            return;
        }
    }
}

The let keyword introduces a local variable. Variables are immutable by default. To introduce a local variable that you can re-assign later, use let mut instead.

let hi = "hi";
let mut count = 0;

while count < 10 {
    io::println(hi);
    count += 1;
}

Although Rust can almost always infer the types of local variables, you can specify a variable's type by following it with a colon, then the type name.

let monster_size: float = 57.8;
let imaginary_size = monster_size * 10.0;
let monster_size: int = 50;

Local variables may shadow earlier declarations, as in the previous example: monster_size was first declared as a float, and then then a second monster_size was declared as an int. If you were to actually compile this example, though, the compiler will determine that the second monster_size is unused and issue a warning (because this situation is likely to indicate a programmer error). For occasions where unused variables are intentional, their name may be prefixed with an underscore to silence the warning, like let _monster_size = 50;.

Rust identifiers follow the same rules as C; they start with an alphabetic character or an underscore, and after that may contain any sequence of alphabetic characters, numbers, or underscores. The preferred style is to begin function, variable, and module names with a lowercase letter, using underscores where they help readability, while writing types in camel case.

let my_variable = 100;
type MyType = int;     // some built-in types are _not_ camel case

Expression syntax

Though it isn't apparent in all code, there is a fundamental difference between Rust's syntax and predecessors like C. Many constructs that are statements in C are expressions in Rust, allowing code to be more concise. For example, you might write a piece of code like this:

# let item = "salad";
let price;
if item == "salad" {
    price = 3.50;
} else if item == "muffin" {
    price = 2.25;
} else {
    price = 2.00;
}

But, in Rust, you don't have to repeat the name price:

# let item = "salad";
let price =
    if item == "salad" {
        3.50
    } else if item == "muffin" {
        2.25
    } else {
        2.00
    };

Both pieces of code are exactly equivalent: they assign a value to price depending on the condition that holds. Note that there are no semicolons in the blocks of the second snippet. This is important: the lack of a semicolon after the last statement in a braced block gives the whole block the value of that last expression.

Put another way, the semicolon in Rust ignores the value of an expression. Thus, if the branches of the if had looked like { 4; }, the above example would simply assign () (nil or void) to price. But without the semicolon, each branch has a different value, and price gets the value of the branch that was taken.

In short, everything that's not a declaration (declarations are let for variables, fn for functions, and any top-level named items such as traits, enum types, and constants) is an expression, including function bodies.

fn is_four(x: int) -> bool {
   // No need for a return statement. The result of the expression
   // is used as the return value.
   x == 4
}

If all those things are expressions, you might conclude that you have to add a terminating semicolon after every statement, even ones that are not traditionally terminated with a semicolon in C (like while). That is not the case, though. Expressions that end in a block only need a semicolon if that block contains a trailing expression. while loops do not allow trailing expressions, and if statements tend to only have a trailing expression when you want to use their value for something—in which case you'll have embedded it in a bigger statement.

# fn foo() -> bool { true }
# fn bar() -> bool { true }
# fn baz() -> bool { true }
// `let` is not an expression, so it is semicolon-terminated;
let x = foo();

// When used in statement position, bracy expressions do not
// usually need to be semicolon terminated
if x {
    bar();
} else {
    baz();
} // No semi-colon

// Although, if `bar` and `baz` have non-nil return types, and
// we try to use them as the tail expressions, rustc will
// make us terminate the expression.
if x {
    bar()
} else {
    baz()
}; // Semi-colon to ignore non-nil block type

// An `if` embedded in `let` again requires a semicolon to terminate
// the `let` statement
let y = if x { foo() } else { bar() };

This may sound intricate, but it is super-useful and will grow on you.

Types

The basic types include the usual boolean, integral, and floating-point types.

---

() Unit, the type that has only a single value bool Boolean type, with values true and false int, uint Machine-pointer-sized signed and unsigned integers i8, i16, i32, i64 Signed integers with a specific size (in bits) u8, u16, u32, u64 Unsigned integers with a specific size float The largest floating-point type efficiently supported on the target machine f32, f64 Floating-point types with a specific size char A Unicode character (32 bits)

---

These can be combined in composite types, which will be described in more detail later on (the Ts here stand for any other type, while N should be a literal number):

---

[T * N] Vector (like an array in other languages) with N elements [mut T * N] Mutable vector with N elements (T1, T2) Tuple type; any arity above 1 is supported &T, ~T, @T Pointer types

---

Some types can only be manipulated by pointer, never directly. For instance, you cannot refer to a string (str); instead you refer to a pointer to a string (@str, ~str, or &str). These dynamically-sized types consist of:

---

fn(a: T1, b: T2) -> T3 Function types str String type (in UTF-8) [T] Vector with unknown size (also called a slice) [mut T] Mutable vector with unknown size

---

Note

: In the future, mutability for vectors may be defined by the slot that contains the vector, not the type of the vector itself, deprecating [mut T] syntax.

In function types, the return type is specified with an arrow, as in the type fn() -> bool or the function declaration fn foo() -> bool { }. For functions that do not return a meaningful value, you can optionally write -> (), but usually the return annotation is simply left off, as in fn main() { ... }.

Types can be given names or aliases with type declarations:

type MonsterSize = uint;

This will provide a synonym, MonsterSize, for unsigned integers. It will not actually create a new, incompatible type—MonsterSize and uint can be used interchangeably, and using one where the other is expected is not a type error. In that sense, types declared with type are structural: their meaning follows from their structure, and their names are irrelevant in the type system.

Sometimes, you want your data types to be nominal instead of structural: you want their name to be part of their meaning, so that types with the same structure but different names are not interchangeable. Rust has two ways to create nominal data types: struct and enum. They're described in more detail below, but they look like this:

enum HidingPlaces {
   Closet(uint),
   UnderTheBed(uint)
}

struct HeroicBabysitter {
   bedtime_stories: uint,
   sharpened_stakes: uint
}

struct BabysitterSize(uint);  // a single-variant struct
enum MonsterSize = uint;      // a single-variant enum

Literals

Integers can be written in decimal (144), hexadecimal (0x90), or binary (0b10010000) base. Each integral type has a corresponding literal suffix that can be used to indicate the type of a literal: i for int, u for uint, and i8 for the i8 type, etc.

In the absence of an integer literal suffix, Rust will infer the integer type based on type annotations and function signatures in the surrounding program. In the absence of any type information at all, Rust will assume that an unsuffixed integer literal has type int.

let a = 1;       // a is an int
let b = 10i;     // b is an int, due to the 'i' suffix
let c = 100u;    // c is a uint
let d = 1000i32; // d is an i32

Floating point numbers are written 0.0, 1e6, or 2.1e-4. Without a suffix, the literal is assumed to be of type float. Suffixes f32 (32-bit) and f64 (64-bit) can be used to create literals of a specific type.

The unit literal is written just like the type: (). The keywords true and false produce the boolean literals.

Character literals are written between single quotes, as in 'x'. Just like C, Rust understands a number of character escapes, using the backslash character, such as \n, \r, and \t. String literals, written between double quotes, allow the same escape sequences. Rust strings may contain newlines.

Constants

Compile-time constants are declared with const. A constant may have any scalar type (for example, integer or float). Other allowable constant types are fixed-length vectors, static strings (more on this later), and structs. Constants may be declared in any scope and may refer to other constants. The compiler does not infer types for constants, so constants must always be declared with a type annotation. By convention, they are written in all capital letters.

// Scalars can be constants
const MY_PASSWORD: int = 12345;

// Scalar constants can be combined with other constants
const MY_DOGGIES_PASSWORD: int = MY_PASSWORD + 1;

// Fixed-length vectors
const MY_VECTORY_PASSWORD: [int * 5] = [1, 2, 3, 4, 5];

// Static strings
const MY_STRINGY_PASSWORD: &static/str = "12345";

// Structs
struct Password { value: int }
const MY_STRUCTY_PASSWORD: Password = Password { value: MY_PASSWORD };

Operators

Rust's set of operators contains very few surprises. Arithmetic is done with *, /, %, +, and - (multiply, divide, take remainder, add, subtract). - is also a unary prefix operator that negates numbers. As in C, the bit operators >>, <<, &, |, and ^ are also supported.

Note that, if applied to an integer value, ! flips all the bits (like ~ in C).

The comparison operators are the traditional ==, !=, <, >, <=, and >=. Short-circuiting (lazy) boolean operators are written && (and) and || (or).

For type casting, Rust uses the binary as operator. It takes an expression on the left side and a type on the right side and will, if a meaningful conversion exists, convert the result of the expression to the given type.

let x: float = 4.0;
let y: uint = x as uint;
assert y == 4u;

The main difference with C is that ++ and -- are missing, and that the logical bitwise operators have higher precedence—in C, x & 2 > 0 means x & (2 > 0), but in Rust, it means (x & 2) > 0, which is more likely to be what a novice expects.

Syntax extensions

Syntax extensions are special forms that are not built into the language, but are instead provided by the libraries. To make it clear to the reader when a name refers to a syntax extension, the names of all syntax extensions end with !. The standard library defines a few syntax extensions, the most useful of which is fmt!, a sprintf-style text formatter that an early compiler phase expands statically.

fmt! supports most of the directives that printf supports, but unlike printf, will give you a compile-time error when the types of the directives don't match the types of the arguments.

# let mystery_object = ();

io::println(fmt!("%s is %d", "the answer", 43));

// %? will conveniently print any type
io::println(fmt!("what is this thing: %?", mystery_object));

You can define your own syntax extensions with the macro system. For details, see the macro tutorial.

Control structures

Conditionals

We've seen if expressions a few times already. To recap, braces are compulsory, an if can have an optional else clause, and multiple if/else constructs can be chained together:

if false {
    io::println("that's odd");
} else if true {
    io::println("right");
} else {
    io::println("neither true nor false");
}

The condition given to an if construct must be of type bool (no implicit conversion happens). If the arms are blocks that have a value, this value must be of the same type for every arm in which control reaches the end of the block:

fn signum(x: int) -> int {
    if x < 0 { -1 }
    else if x > 0 { 1 }
    else { return 0 }
}

Pattern matching

Rust's match construct is a generalized, cleaned-up version of C's switch construct. You provide it with a value and a number of arms, each labelled with a pattern, and the code compares the value against each pattern in order until one matches. The matching pattern executes its corresponding arm.

# let my_number = 1;
match my_number {
  0     => io::println("zero"),
  1 | 2 => io::println("one or two"),
  3..10 => io::println("three to ten"),
  _     => io::println("something else")
}

Unlike in C, there is no 'falling through' between arms: only one arm executes, and it doesn't have to explicitly break out of the construct when it is finished.

A match arm consists of a pattern, then an arrow =>, followed by an action (expression). Literals are valid patterns and match only their own value. A single arm may match multiple different patterns by combining them with the pipe operator (|), so long as every pattern binds the same set of variables. Ranges of numeric literal patterns can be expressed with two dots, as in M..N. The underscore (_) is a wildcard pattern that matches any single value. The asterisk (*) is a different wildcard that can match one or more fields in an enum variant.

The patterns in a match arm are followed by a fat arrow, =>, then an expression to evaluate. Each case is separated by commas. It's often convenient to use a block expression for each case, in which case the commas are optional.

# let my_number = 1;
match my_number {
  0 => { io::println("zero") }
  _ => { io::println("something else") }
}

match constructs must be exhaustive: they must have an arm covering every possible case. For example, the typechecker would reject the previous example if the arm with the wildcard pattern was omitted.

A powerful application of pattern matching is destructuring: matching in order to bind names to the contents of data types. Remember that (float, float) is a tuple of two floats:

fn angle(vector: (float, float)) -> float {
    let pi = float::consts::pi;
    match vector {
      (0f, y) if y < 0f => 1.5 * pi,
      (0f, y) => 0.5 * pi,
      (x, y) => float::atan(y / x)
    }
}

A variable name in a pattern matches any value, and binds that name to the value of the matched value inside of the arm's action. Thus, (0f, y) matches any tuple whose first element is zero, and binds y to the second element. (x, y) matches any tuple, and binds both elements to variables.

Any match arm can have a guard clause (written if EXPR), called a pattern guard, which is an expression of type bool that determines, after the pattern is found to match, whether the arm is taken or not. The variables bound by the pattern are in scope in this guard expression. The first arm in the angle example shows an example of a pattern guard.

You've already seen simple let bindings, but let is a little fancier than you've been led to believe. It, too, supports destructuring patterns. For example, you can write this to extract the fields from a tuple, introducing two variables at once: a and b.

# fn get_tuple_of_two_ints() -> (int, int) { (1, 1) }
let (a, b) = get_tuple_of_two_ints();

Let bindings only work with irrefutable patterns: that is, patterns that can never fail to match. This excludes let from matching literals and most enum variants.

Loops

while denotes a loop that iterates as long as its given condition (which must have type bool) evaluates to true. Inside a loop, the keyword break aborts the loop, and loop aborts the current iteration and continues with the next.

let mut cake_amount = 8;
while cake_amount > 0 {
    cake_amount -= 1;
}

loop denotes an infinite loop, and is the preferred way of writing while true:

let mut x = 5;
loop {
    x += x - 3;
    if x % 5 == 0 { break; }
    io::println(int::str(x));
}

This code prints out a weird sequence of numbers and stops as soon as it finds one that can be divided by five.

For more involved iteration, such as enumerating the elements of a collection, Rust uses higher-order functions.

Data structures

Structs

Rust struct types must be declared before they are used using the struct syntax: struct Name { field1: T1, field2: T2 [, ...] }, where T1, T2, ... denote types. To construct a struct, use the same syntax, but leave off the struct: for example: Point { x: 1.0, y: 2.0 }.

Structs are quite similar to C structs and are even laid out the same way in memory (so you can read from a Rust struct in C, and vice-versa). Use the dot operator to access struct fields, as in mypoint.x.

Fields that you want to mutate must be explicitly marked mut.

struct Stack {
    content: ~[int],
    mut head: uint
}

With a value of such a type, you can do mystack.head += 1. If mut were omitted from the type, such an assignment would result in a type error.

match patterns destructure structs. The basic syntax is Name {fieldname: pattern, ...}:

# struct Point { x: float, y: float }
# let mypoint = Point { x: 0.0, y: 0.0 };
match mypoint {
    Point { x: 0.0, y: yy } => { io::println(yy.to_str());                     }
    Point { x: xx,  y: yy } => { io::println(xx.to_str() + " " + yy.to_str()); }
}

In general, the field names of a struct do not have to appear in the same order they appear in the type. When you are not interested in all the fields of a struct, a struct pattern may end with , _ (as in Name {field1, _}) to indicate that you're ignoring all other fields. Additionally, struct fields have a shorthand matching form that simply reuses the field name as the binding name.

# struct Point { x: float, y: float }
# let mypoint = Point { x: 0.0, y: 0.0 };
match mypoint {
    Point { x, _ } => { io::println(x.to_str()) }
}

Enums

Enums are datatypes that have several alternate representations. For example, consider the type shown earlier:

# struct Point { x: float, y: float }
enum Shape {
    Circle(Point, float),
    Rectangle(Point, Point)
}

A value of this type is either a Circle, in which case it contains a Point struct and a float, or a Rectangle, in which case it contains two Point structs. The run-time representation of such a value includes an identifier of the actual form that it holds, much like the 'tagged union' pattern in C, but with better static guarantees.

The above declaration will define a type Shape that can refer to such shapes, and two functions, Circle and Rectangle, which can be used to construct values of the type (taking arguments of the specified types). So Circle(Point {x: 0f, y: 0f}, 10f) is the way to create a new circle.

Enum variants need not have type parameters. This enum declaration, for example, is equivalent to a C enum:

enum Direction {
    North,
    East,
    South,
    West
}

This declaration defines North, East, South, and West as constants, all of which have type Direction.

When an enum is C-like (that is, when none of the variants have parameters), it is possible to explicitly set the discriminator values to a constant value:

enum Color {
  Red = 0xff0000,
  Green = 0x00ff00,
  Blue = 0x0000ff
}

If an explicit discriminator is not specified for a variant, the value defaults to the value of the previous variant plus one. If the first variant does not have a discriminator, it defaults to 0. For example, the value of North is 0, East is 1, South is 2, and West is 3.

When an enum is C-like, you can apply the as cast operator to convert it to its discriminator value as an int.

There is a special case for enums with a single variant, which are sometimes called "newtype-style enums" (after Haskell's "newtype" feature). These are used to define new types in such a way that the new name is not just a synonym for an existing type, but its own distinct type: type creates a structural synonym, while this form of enum creates a nominal synonym. If you say:

enum GizmoId = int;

That is a shorthand for this:

enum GizmoId { GizmoId(int) }

You can extract the contents of such an enum type with the dereference (*) unary operator:

# enum GizmoId = int;
let my_gizmo_id: GizmoId = GizmoId(10);
let id_int: int = *my_gizmo_id;

Types like this can be useful to differentiate between data that have the same type but must be used in different ways.

enum Inches = int;
enum Centimeters = int;

The above definitions allow for a simple way for programs to avoid confusing numbers that correspond to different units.

For enum types with multiple variants, destructuring is the only way to get at their contents. All variant constructors can be used as patterns, as in this definition of area:

# struct Point {x: float, y: float}
# enum Shape { Circle(Point, float), Rectangle(Point, Point) }
fn area(sh: Shape) -> float {
    match sh {
        Circle(_, size) => float::consts::pi * size * size,
        Rectangle(Point {x, y}, Point {x: x2, y: y2}) => (x2 - x) * (y2 - y)
    }
}

You can write a lone _ to ignore an individual field, and can ignore all fields of a variant like: Circle(*). As in their introduction form, nullary enum patterns are written without parentheses.

# struct Point {x: float, y: float}
# enum Direction { North, East, South, West }
fn point_from_direction(dir: Direction) -> Point {
    match dir {
        North => Point {x:  0f, y:  1f},
        East  => Point {x:  1f, y:  0f},
        South => Point {x:  0f, y: -1f},
        West  => Point {x: -1f, y:  0f}
    }
}

Tuples

Tuples in Rust behave exactly like structs, except that their fields do not have names. Thus, you cannot access their fields with dot notation. Tuples can have any arity except for 0 or 1 (though you may consider unit, (), as the empty tuple if you like).

let mytup: (int, int, float) = (10, 20, 30.0);
match mytup {
  (a, b, c) => log(info, a + b + (c as int))
}

Functions and methods

We've already seen several function definitions. Like all other static declarations, such as type, functions can be declared both at the top level and inside other functions (or in modules, which we'll come back to later). The fn keyword introduces a function. A function has an argument list, which is a parenthesized list of expr: type pairs separated by commas. An arrow -> separates the argument list and the function's return type.

fn line(a: int, b: int, x: int) -> int {
    return a * x + b;
}

The return keyword immediately returns from the body of a function. It is optionally followed by an expression to return. A function can also return a value by having its top level block produce an expression.

fn line(a: int, b: int, x: int) -> int {
    a * x + b
}

It's better Rust style to write a return value this way instead of writing an explicit return. The utility of return comes in when returning early from a function. Functions that do not return a value are said to return nil, (), and both the return type and the return value may be omitted from the definition. The following two functions are equivalent.

fn do_nothing_the_hard_way() -> () { return (); }

fn do_nothing_the_easy_way() { }

Ending the function with a semicolon like so is equivalent to returning ().

fn line(a: int, b: int, x: int) -> int { a * x + b  }
fn oops(a: int, b: int, x: int) -> ()  { a * x + b; }

assert 8  == line(5, 3, 1);
assert () == oops(5, 3, 1);

Methods are like functions, except that they have an implicit argument called self, which has the type that the method's receiver has. The self argument is like 'this' in C++. An expression with dot notation, as in my_vec.len(), denotes a method call. Implementations, written with the impl keyword, can define methods on most Rust types. As an example, let's define a draw method on our Shape enum.

# fn draw_circle(p: Point, f: float) { }
# fn draw_rectangle(p: Point, p: Point) { }
struct Point {
    x: float,
    y: float
}

enum Shape {
    Circle(Point, float),
    Rectangle(Point, Point)
}

impl Shape {
    fn draw() {
        match self {
            Circle(p, f) => draw_circle(p, f),
            Rectangle(p1, p2) => draw_rectangle(p1, p2)
        }
    }
}

let s = Circle(Point { x: 1f, y: 2f }, 3f);
s.draw();

This defines an implementation for Shape containing a single method, draw. In most respects the draw method is defined like any other function, except for the name self. self is a special value that is automatically in scope inside each method, referring to the value being operated on. If we wanted we could add additional methods to the same impl, or multiple impls for the same type. We'll discuss methods more in the context of traits and generics.

Note: In the future, the method definition syntax will change to require declaring the self type explicitly, as the first argument.

The Rust memory model

At this junction, let's take a detour to explain the concepts involved in Rust's memory model. We've seen some of Rust's pointer sigils (@, ~, and &) float by in a few examples, and we aren't going to get much further without explaining them. Rust has a very particular approach to memory management that plays a significant role in shaping the subjective experience of programming in the language. Understanding the memory landscape will illuminate several of Rust's unique features as we encounter them.

Rust has three competing goals that inform its view of memory:

• Memory safety: Memory that the Rust language can observe must be guaranteed to be valid. Under normal circumstances, it must be impossible for Rust to trigger a segmentation fault or leak memory.
• Performance: High-performance low-level code must be able to use a number of different allocation strategies. Tracing garbage collection must be optional and, if it is not desired, memory safety must not be compromised. Less performance-critical, high-level code should be able to employ a single, garbage-collection-based, heap allocation strategy.
• Concurrency: Rust code must be free of in-memory data races. (Note that other types of races are still possible.)

How performance considerations influence the memory model

Most languages that offer strong memory safety guarantees rely on a garbage-collected heap to manage all of the objects. This approach is straightforward both in concept and in implementation, but has significant costs. Languages that follow this path tend to aggressively pursue ways to ameliorate allocation costs (think the Java Virtual Machine). Rust supports this strategy with managed boxes: memory allocated on the heap whose lifetime is managed by the garbage collector.

By comparison, languages like C++ offer very precise control over where objects are allocated. In particular, it is common to allocate them directly on the stack, avoiding expensive heap allocation. In Rust this is possible as well, and the compiler uses a clever pointer lifetime analysis to ensure that no variable can refer to stack objects after they are destroyed.

How concurrency considerations influence the memory model

Memory safety in a concurrent environment involves avoiding race conditions between two threads of execution accessing the same memory. Even high-level languages often require programmers to make correct use of locking to ensure that a program is free of races.

Rust starts from the position that memory cannot be shared between tasks. Experience in other languages has proven that isolating each task's heap from the others is a reliable strategy and one that is easy for programmers to reason about. Heap isolation has the additional benefit that garbage collection must only be done per-heap. Rust never "stops the world" to reclaim memory.

Complete isolation of heaps between tasks would, however, mean that any data transferred between tasks must be copied. While this is a fine and useful way to implement communication between tasks, it is also very inefficient for large data structures. To reduce the amount of copying, Rust also uses a global exchange heap. Objects allocated in the exchange heap have ownership semantics, meaning that there is only a single variable that refers to them. For this reason, they are referred to as owned boxes. All tasks may allocate objects on the exchange heap, then transfer ownership of those objects to other tasks, avoiding expensive copies.

Boxes and pointers

Many modern languages have a so-called "uniform representation" for aggregate types like structs and enums, so as to represent these types as pointers to heap memory by default. In contrast, Rust, like C and C++, represents such types directly. Another way to say this is that aggregate data in Rust are unboxed. This means that if you let x = Point {x: 1f, y: 1f};, you are creating a struct on the stack. If you then copy it into a data structure, you copy the entire struct, not just a pointer.

For small structs like Point, this is usually more efficient than allocating memory and indirecting through a pointer. But for big structs, or those with mutable fields, it can be useful to have a single copy on the stack or on the heap, and refer to that through a pointer.

Rust supports several types of pointers. The safe pointer types are @T for managed boxes allocated on the local heap, ~T, for uniquely-owned boxes allocated on the exchange heap, and &T, for borrowed pointers, which may point to any memory, and whose lifetimes are governed by the call stack.

All pointer types can be dereferenced with the * unary operator.

Note

: You may also hear managed boxes referred to as 'shared boxes' or 'shared pointers', and owned boxes as 'unique boxes/pointers'. Borrowed pointers are sometimes called 'region pointers'. The preferred terminology is what we present here.

Managed boxes

Managed boxes are pointers to heap-allocated, garbage collected memory. Applying the unary @ operator to an expression creates a managed box. The resulting box contains the result of the expression. Copying a managed box, as happens during assignment, only copies a pointer, never the contents of the box.

let x: @int = @10; // New box
let y = x; // Copy of a pointer to the same box

// x and y both refer to the same allocation. When both go out of scope
// then the allocation will be freed.

A managed type is either of the form @T for some type T, or any type that contains managed boxes or other managed types.

// A linked list node
struct Node {
    mut next: MaybeNode,
    mut prev: MaybeNode,
    payload: int
}

enum MaybeNode {
    SomeNode(@Node),
    NoNode
}

let node1 = @Node { next: NoNode, prev: NoNode, payload: 1 };
let node2 = @Node { next: NoNode, prev: NoNode, payload: 2 };
let node3 = @Node { next: NoNode, prev: NoNode, payload: 3 };

// Link the three list nodes together
node1.next = SomeNode(node2);
node2.prev = SomeNode(node1);
node2.next = SomeNode(node3);
node3.prev = SomeNode(node2);

Managed boxes never cross task boundaries.

Note: Currently, the Rust compiler generates code to reclaim managed boxes through reference counting and a cycle collector, but we will switch to a tracing garbage collector eventually.

Owned boxes

In contrast with managed boxes, owned boxes have a single owning memory slot and thus two owned boxes may not refer to the same memory. All owned boxes across all tasks are allocated on a single exchange heap, where their uniquely-owned nature allows tasks to exchange them efficiently.

Because owned boxes are uniquely owned, copying them requires allocating a new owned box and duplicating the contents. Copying owned boxes is expensive so the compiler will complain if you do so without writing the word copy.

let x = ~10;
let y = x; // error: copying a non-implicitly copyable type

If you really want to copy an owned box you must say so explicitly.

let x = ~10;
let y = copy x;

let z = *x + *y;
assert z == 20;

This is where the 'move' operator comes in. It is similar to copy, but it de-initializes its source. Thus, the owned box can move from x to y, without violating the constraint that it only has a single owner (using assignment instead of the move operator would, in principle, copy the box).

let x = ~10;
let y = move x;

let z = *x + *y; // would cause an error: use of moved variable: `x`

Owned boxes, when they do not contain any managed boxes, can be sent to other tasks. The sending task will give up ownership of the box, and won't be able to access it afterwards. The receiving task will become the sole owner of the box.

Borrowed pointers

Rust borrowed pointers are a general purpose reference/pointer type, similar to the C++ reference type, but guaranteed to point to valid memory. In contrast with owned pointers, where the holder of an owned pointer is the owner of the pointed-to memory, borrowed pointers never imply ownership. Pointers may be borrowed from any type, in which case the pointer is guaranteed not to outlive the value it points to.

As an example, consider a simple struct type, Point:

struct Point {
    x: float, y: float
}

We can use this simple definition to allocate points in many different ways. For example, in this code, each of these three local variables contains a point, but allocated in a different location:

# struct Point { x: float, y: float }
let on_the_stack : Point  =  Point {x: 3.0, y: 4.0};
let managed_box  : @Point = @Point {x: 5.0, y: 1.0};
let owned_box    : ~Point = ~Point {x: 7.0, y: 9.0};

Suppose we wanted to write a procedure that computed the distance between any two points, no matter where they were stored. For example, we might like to compute the distance between on_the_stack and managed_box, or between managed_box and owned_box. One option is to define a function that takes two arguments of type point—that is, it takes the points by value. But this will cause the points to be copied when we call the function. For points, this is probably not so bad, but often copies are expensive or, worse, if there are mutable fields, they can change the semantics of your program. So we’d like to define a function that takes the points by pointer. We can use borrowed pointers to do this:

# struct Point { x: float, y: float }
# fn sqrt(f: float) -> float { 0f }
fn compute_distance(p1: &Point, p2: &Point) -> float {
    let x_d = p1.x - p2.x;
    let y_d = p1.y - p2.y;
    sqrt(x_d * x_d + y_d * y_d)
}

Now we can call compute_distance() in various ways:

# struct Point{ x: float, y: float };
# let on_the_stack : Point  =  Point {x: 3.0, y: 4.0};
# let managed_box  : @Point = @Point {x: 5.0, y: 1.0};
# let owned_box    : ~Point = ~Point {x: 7.0, y: 9.0};
# fn compute_distance(p1: &Point, p2: &Point) -> float { 0f }
compute_distance(&on_the_stack, managed_box);
compute_distance(managed_box, owned_box);

Here the & operator is used to take the address of the variable on_the_stack; this is because on_the_stack has the type Point (that is, a struct value) and we have to take its address to get a value. We also call this borrowing the local variable on_the_stack, because we are created an alias: that is, another route to the same data.

In the case of the boxes managed_box and owned_box, however, no explicit action is necessary. The compiler will automatically convert a box like @point or ~point to a borrowed pointer like &point. This is another form of borrowing; in this case, the contents of the managed/owned box is being lent out.

Whenever a value is borrowed, there are some limitations on what you can do with the original. For example, if the contents of a variable have been lent out, you cannot send that variable to another task, nor will you be permitted to take actions that might cause the borrowed value to be freed or to change its type. This rule should make intuitive sense: you must wait for a borrowed value to be returned (that is, for the borrowed pointer to go out of scope) before you can make full use of it again.

For a more in-depth explanation of borrowed pointers, read the borrowed pointer tutorial.

Dereferencing pointers

Rust uses the unary star operator (*) to access the contents of a box or pointer, similarly to C.

let managed = @10;
let owned = ~20;
let borrowed = &30;

let sum = *managed + *owned + *borrowed;

Dereferenced mutable pointers may appear on the left hand side of assignments. Such an assignment modifies the value that the pointer points to.

let managed = @mut 10;
let owned = ~mut 20;

let mut value = 30;
let borrowed = &mut value;

*managed = *owned + 10;
*owned = *borrowed + 100;
*borrowed = *managed + 1000;

Pointers have high operator precedence, but lower precedence than the dot operator used for field and method access. This precedence order can sometimes make code awkward and parenthesis-filled.

# struct Point { x: float, y: float }
# enum Shape { Rectangle(Point, Point) }
# impl Shape { fn area() -> int { 0 } }
let start = @Point { x: 10f, y: 20f };
let end = ~Point { x: (*start).x + 100f, y: (*start).y + 100f };
let rect = &Rectangle(*start, *end);
let area = (*rect).area();

To combat this ugliness the dot operator applies automatic pointer dereferencing to the receiver (the value on the left hand side of the dot), so in most cases, explicitly dereferencing the receiver is not necessary.

# struct Point { x: float, y: float }
# enum Shape { Rectangle(Point, Point) }
# impl Shape { fn area() -> int { 0 } }
let start = @Point { x: 10f, y: 20f };
let end = ~Point { x: start.x + 100f, y: start.y + 100f };
let rect = &Rectangle(*start, *end);
let area = rect.area();

You can write an expression that dereferences any number of pointers automatically. For example, if you felt inclined, you could write something silly like

# struct Point { x: float, y: float }
let point = &@~Point { x: 10f, y: 20f };
io::println(fmt!("%f", point.x));

The indexing operator ([]) also auto-dereferences.

Vectors and strings

A vector is a contiguous section of memory containing zero or more values of the same type. Like other types in Rust, vectors can be stored on the stack, the local heap, or the exchange heap. Borrowed pointers to vectors are also called 'slices'.

# enum Crayon {
#     Almond, AntiqueBrass, Apricot,
#     Aquamarine, Asparagus, AtomicTangerine,
#     BananaMania, Beaver, Bittersweet,
#     Black, BlizzardBlue, Blue
# }
// A fixed-size stack vector
let stack_crayons: [Crayon * 3] = [Almond, AntiqueBrass, Apricot];

// A borrowed pointer to stack allocated vector
let stack_crayons: &[Crayon] = &[Aquamarine, Asparagus, AtomicTangerine];

// A local heap (managed) vector of crayons
let local_crayons: @[Crayon] = @[BananaMania, Beaver, Bittersweet];

// An exchange heap (owned) vector of crayons
let exchange_crayons: ~[Crayon] = ~[Black, BlizzardBlue, Blue];

The + operator means concatenation when applied to vector types.

# enum Crayon { Almond, AntiqueBrass, Apricot,
#               Aquamarine, Asparagus, AtomicTangerine,
#               BananaMania, Beaver, Bittersweet };

let my_crayons = ~[Almond, AntiqueBrass, Apricot];
let your_crayons = ~[BananaMania, Beaver, Bittersweet];

// Add two vectors to create a new one
let our_crayons = my_crayons + your_crayons;

// += will append to a vector, provided it lives in a mutable slot
let mut my_crayons = move my_crayons;
my_crayons += your_crayons;

Note: The above examples of vector addition use owned vectors. Some operations on slices and stack vectors are not yet well-supported. Owned vectors are often the most usable.

Square brackets denote indexing into a vector:

# enum Crayon { Almond, AntiqueBrass, Apricot,
#               Aquamarine, Asparagus, AtomicTangerine,
#               BananaMania, Beaver, Bittersweet };
# fn draw_scene(c: Crayon) { }
let crayons: [Crayon * 3] = [BananaMania, Beaver, Bittersweet];
match crayons[0] {
    Bittersweet => draw_scene(crayons[0]),
    _ => ()
}

The elements of a vector inherit the mutability of the vector, and as such, individual elements may not be reassigned when the vector lives in an immutable slot.

# enum Crayon { Almond, AntiqueBrass, Apricot,
#               Aquamarine, Asparagus, AtomicTangerine,
#               BananaMania, Beaver, Bittersweet };
let crayons: ~[Crayon] = ~[BananaMania, Beaver, Bittersweet];

crayons[0] = Apricot; // ERROR: Can't assign to immutable vector

Moving it into a mutable slot makes the elements assignable.

# enum Crayon { Almond, AntiqueBrass, Apricot,
#               Aquamarine, Asparagus, AtomicTangerine,
#               BananaMania, Beaver, Bittersweet };
let crayons: ~[Crayon] = ~[BananaMania, Beaver, Bittersweet];

// Put the vector into a mutable slot
let mut mutable_crayons = move crayons;

// Now it's mutable to the bone
mutable_crayons[0] = Apricot;

This is a simple example of Rust's dual-mode data structures, also referred to as freezing and thawing.

Strings are implemented with vectors of u8, though they have a distinct type. They support most of the same allocation options as vectors, though the string literal without a storage sigil (for example, "foo") is treated differently than a comparable vector ([foo]). Whereas plain vectors are stack-allocated fixed-length vectors, plain strings are region pointers to read-only memory. All strings are immutable.

// A plain string is a slice to read-only (static) memory
let stack_crayons: &str = "Almond, AntiqueBrass, Apricot";

// The same thing, but with the `&`
let stack_crayons: &str = &"Aquamarine, Asparagus, AtomicTangerine";

// A local heap (managed) string
let local_crayons: @str = @"BananMania, Beaver, Bittersweet";

// An exchange heap (owned) string
let exchange_crayons: ~str = ~"Black, BlizzardBlue, Blue";

Both vectors and strings support a number of useful methods, defined in core::vec and core::str. Here are some examples.

# use io::println;
# enum Crayon {
#     Almond, AntiqueBrass, Apricot,
#     Aquamarine, Asparagus, AtomicTangerine,
#     BananaMania, Beaver, Bittersweet
# }
# fn unwrap_crayon(c: Crayon) -> int { 0 }
# fn eat_crayon_wax(i: int) { }
# fn store_crayon_in_nasal_cavity(i: uint, c: Crayon) { }
# fn crayon_to_str(c: Crayon) -> &str { "" }

let crayons = [Almond, AntiqueBrass, Apricot];

// Check the length of the vector
assert crayons.len() == 3;
assert !crayons.is_empty();

// Iterate over a vector, obtaining a pointer to each element
for crayons.each |crayon| {
    let delicious_crayon_wax = unwrap_crayon(*crayon);
    eat_crayon_wax(delicious_crayon_wax);
}

// Map vector elements
let crayon_names = crayons.map(|v| crayon_to_str(*v));
let favorite_crayon_name = crayon_names[0];

// Remove whitespace from before and after the string
let new_favorite_crayon_name = favorite_crayon_name.trim();

if favorite_crayon_name.len() > 5 {
   // Create a substring
   println(favorite_crayon_name.substr(0, 5));
}

Closures

Named functions, like those we've seen so far, may not refer to local variables declared outside the function: they do not close over their environment (sometimes referred to as "capturing" variables in their environment). For example, you couldn't write the following:

let foo = 10;

fn bar() -> int {
   return foo; // `bar` cannot refer to `foo`
}

Rust also supports closures, functions that can access variables in the enclosing scope.

# use println = io::println;
fn call_closure_with_ten(b: fn(int)) { b(10); }

let captured_var = 20;
let closure = |arg| println(fmt!("captured_var=%d, arg=%d", captured_var, arg));

call_closure_with_ten(closure);

Closures begin with the argument list between vertical bars and are followed by a single expression. The types of the arguments are generally omitted, as is the return type, because the compiler can almost always infer them. In the rare case where the compiler needs assistance, though, the arguments and return types may be annotated.

let square = |x: int| -> uint { x * x as uint };

There are several forms of closure, each with its own role. The most common, called a stack closure, has type &fn and can directly access local variables in the enclosing scope.

let mut max = 0;
[1, 2, 3].map(|x| if *x > max { max = *x });

Stack closures are very efficient because their environment is allocated on the call stack and refers by pointer to captured locals. To ensure that stack closures never outlive the local variables to which they refer, stack closures are not first-class. That is, they can only be used in argument position; they cannot be stored in data structures or returned from functions. Despite these limitations, stack closures are used pervasively in Rust code.

Managed closures

When you need to store a closure in a data structure, a stack closure will not do, since the compiler will refuse to let you store it. For this purpose, Rust provides a type of closure that has an arbitrary lifetime, written @fn (boxed closure, analogous to the @ pointer type described earlier). This type of closure is first-class.

A managed closure does not directly access its environment, but merely copies out the values that it closes over into a private data structure. This means that it can not assign to these variables, and cannot observe updates to them.

This code creates a closure that adds a given string to its argument, returns it from a function, and then calls it:

# extern mod std;
fn mk_appender(suffix: ~str) -> @fn(~str) -> ~str {
    // The compiler knows that we intend this closure to be of type @fn
    return |s| s + suffix;
}

fn main() {
    let shout = mk_appender(~"!");
    io::println(shout(~"hey ho, let's go"));
}

Owned closures

Owned closures, written ~fn in analogy to the ~ pointer type, hold on to things that can safely be sent between processes. They copy the values they close over, much like managed closures, but they also own them: that is, no other code can access them. Owned closures are used in concurrent code, particularly for spawning tasks.

Closure compatibility

Rust closures have a convenient subtyping property: you can pass any kind of closure (as long as the arguments and return types match) to functions that expect a fn(). Thus, when writing a higher-order function that only calls its function argument, and does nothing else with it, you should almost always declare the type of that argument as fn(). That way, callers may pass any kind of closure.

fn call_twice(f: fn()) { f(); f(); }
let closure = || { "I'm a closure, and it doesn't matter what type I am"; };
fn function() { "I'm a normal function"; }
call_twice(closure);
call_twice(function);

Note: Both the syntax and the semantics will be changing in small ways. At the moment they can be unsound in some scenarios, particularly with non-copyable types.

Do syntax

The do expression provides a way to treat higher-order functions (functions that take closures as arguments) as control structures.

Consider this function that iterates over a vector of integers, passing in a pointer to each integer in the vector:

fn each(v: &[int], op: fn(v: &int)) {
   let mut n = 0;
   while n < v.len() {
       op(&v[n]);
       n += 1;
   }
}

As an aside, the reason we pass in a pointer to an integer rather than the integer itself is that this is how the actual each() function for vectors works. vec::each though is a generic function, so must be efficient to use for all types. Passing the elements by pointer avoids copying potentially large objects.

As a caller, if we use a closure to provide the final operator argument, we can write it in a way that has a pleasant, block-like structure.

# fn each(v: &[int], op: fn(v: &int)) { }
# fn do_some_work(i: &int) { }
each([1, 2, 3], |n| {
    do_some_work(n);
});

This is such a useful pattern that Rust has a special form of function call that can be written more like a built-in control structure:

# fn each(v: &[int], op: fn(v: &int)) { }
# fn do_some_work(i: &int) { }
do each([1, 2, 3]) |n| {
    do_some_work(n);
}

The call is prefixed with the keyword do and, instead of writing the final closure inside the argument list, it appears outside of the parentheses, where it looks more like a typical block of code.

do is a convenient way to create tasks with the task::spawn function. spawn has the signature spawn(fn: ~fn()). In other words, it is a function that takes an owned closure that takes no arguments.

use task::spawn;

do spawn() || {
    debug!("I'm a task, whatever");
}

Look at all those bars and parentheses - that's two empty argument lists back to back. Since that is so unsightly, empty argument lists may be omitted from do expressions.

# use task::spawn;
do spawn {
   debug!("Kablam!");
}

For loops

The most common way to express iteration in Rust is with a for loop. Like do, for is a nice syntax for describing control flow with closures. Additionally, within a for loop, break, loop, and return work just as they do with while and loop.

Consider again our each function, this time improved to break early when the iteratee returns false:

fn each(v: &[int], op: fn(v: &int) -> bool) {
   let mut n = 0;
   while n < v.len() {
       if !op(&v[n]) {
           break;
       }
       n += 1;
   }
}

And using this function to iterate over a vector:

# use each = vec::each;
# use println = io::println;
each([2, 4, 8, 5, 16], |n| {
    if *n % 2 != 0 {
        println("found odd number!");
        false
    } else { true }
});

With for, functions like each can be treated more like built-in looping structures. When calling each in a for loop, instead of returning false to break out of the loop, you just write break. To skip ahead to the next iteration, write loop.

# use each = vec::each;
# use println = io::println;
for each([2, 4, 8, 5, 16]) |n| {
    if *n % 2 != 0 {
        println("found odd number!");
        break;
    }
}

As an added bonus, you can use the return keyword, which is not normally allowed in closures, in a block that appears as the body of a for loop: the meaning of return in such a block is to return from the enclosing function, not just the loop body.

# use each = vec::each;
fn contains(v: &[int], elt: int) -> bool {
    for each(v) |x| {
        if (*x == elt) { return true; }
    }
    false
}

for syntax only works with stack closures.

Note: This is, essentially, a special loop protocol: the keywords break, loop, and return work, in varying degree, with while, loop, do, and for constructs.

Generics

Throughout this tutorial, we've been defining functions that act only on specific data types. With type parameters we can also define functions whose arguments have generic types, and which can be invoked with a variety of types. Consider a generic map function, which takes a function function and a vector vector and returns a new vector consisting of the result of applying function to each element of vector:

fn map<T, U>(vector: &[T], function: fn(v: &T) -> U) -> ~[U] {
    let mut accumulator = ~[];
    for vec::each(vector) |element| {
        accumulator.push(function(element));
    }
    return (move accumulator);
}

When defined with type parameters, as denoted by <T, U>, this function can be applied to any type of vector, as long as the type of function's argument and the type of the vector's contents agree with each other.

Inside a generic function, the names of the type parameters (capitalized by convention) stand for opaque types. All you can do with instances of these types is pass them around: you can't apply any operations to them or pattern-match on them. Note that instances of generic types are often passed by pointer. For example, the parameter function() is supplied with a pointer to a value of type T and not a value of type T itself. This ensures that the function works with the broadest set of types possible, since some types are expensive or illegal to copy and pass by value.

Generic type, struct, and enum declarations follow the same pattern:

# use std::map::HashMap;
type Set<T> = HashMap<T, ()>;

struct Stack<T> {
    elements: ~[mut T]
}

enum Maybe<T> {
    Just(T),
    Nothing
}

These declarations can be instantiated to valid types like Set<int>, Stack<int> and Maybe<int>.

The Rust compiler compiles generic functions very efficiently by monomorphizing them. Monomorphization is a fancy name for a simple idea: generate a separate copy of each generic function at each call site where it is called, a copy that is specialized to the argument types and can thus be optimized specifically for them. In this respect, Rust's generics have similar performance characteristics to C++ templates.

Traits

Within a generic function the operations available on generic types are very limited. After all, since the function doesn't know what types it is operating on, it can't safely modify or query their values. This is where traits come into play. Traits are Rust's most powerful tool for writing polymorphic code. Java developers will see them as similar to Java interfaces, and Haskellers will notice their similarities to type classes. Rust's traits are a form of bounded polymorphism: a trait is a way of limiting the set of possible types that a type parameter could refer to.

As motivation, let us consider copying in Rust. The copy operation is not defined for all Rust types. One reason is user-defined destructors: copying a type that has a destructor could result in the destructor running multiple times. Therefore, types with user-defined destructors cannot be copied, either implicitly or explicitly, and neither can types that own other types containing destructors (see the section on structs for the actual mechanism for defining destructors).

This complicates handling of generic functions. If you have a type parameter T, can you copy values of that type? In Rust, you can't, and if you try to run the following code the compiler will complain.

// This does not compile
fn head_bad<T>(v: &[T]) -> T {
    v[0] // error: copying a non-copyable value
}

However, we can tell the compiler that the head function is only for copyable types: that is, those that have the Copy trait.

// This does
fn head<T: Copy>(v: &[T]) -> T {
    v[0]
}

This says that we can call head on any type T as long as that type implements the Copy trait. When instantiating a generic function, you can only instantiate it with types that implement the correct trait, so you could not apply head to a type with a destructor. (Copy is a special trait that is built in to the compiler, making it possible for the compiler to enforce this restriction.)

While most traits can be defined and implemented by user code, three traits are automatically derived and implemented for all applicable types by the compiler, and may not be overridden:

• Copy - Types that can be copied: either implicitly, or explicitly with the copy operator. All types are copyable unless they have destructors or contain types with destructors.

• Send - Sendable (owned) types. All types are sendable unless they contain managed boxes, managed closures, or otherwise managed types. Sendable types may or may not be copyable.

• Const - Constant (immutable) types. These are types that do not contain mutable fields.

Note: These three traits were referred to as 'kinds' in earlier iterations of the language, and often still are.

There is also a special trait known as Drop. This trait defines one method called finalize, which is automatically called when value of the a type that implements this trait is destroyed, either because the value went out of scope or because the garbage collector reclaimed it.

struct TimeBomb {
    explosivity: uint,
}

impl TimeBomb : Drop {
    fn finalize(&self) {
        for iter::repeat(self.explosivity) {
            io::println("blam!");
        }
    }
}

It is illegal to call finalize directly. Only code inserted by the compiler may call it.

Declaring and implementing traits

A trait consists of a set of methods, without bodies, or may be empty, as is the case with Copy, Send, and Const. For example, we could declare the trait Printable for things that can be printed to the console, with a single method:

trait Printable {
    fn print();
}

Traits may be implemented for specific types with impls. An impl that implements a trait includes the name of the trait at the start of the definition, as in the following impls of Printable for int and ~str.

# trait Printable { fn print(); }
impl int: Printable {
    fn print() { io::println(fmt!("%d", self)) }
}

impl &str: Printable {
    fn print() { io::println(self) }
}

# 1.print();
# ("foo").print();

Methods defined in an implementation of a trait may be called just like any other method, using dot notation, as in 1.print(). Traits may themselves contain type parameters. A trait for generalized sequence types might look like the following:

trait Seq<T> {
    fn len() -> uint;
    fn iter(b: fn(v: &T));
}

impl<T> ~[T]: Seq<T> {
    fn len() -> uint { vec::len(self) }
    fn iter(b: fn(v: &T)) {
        for vec::each(self) |elt| { b(elt); }
    }
}

The implementation has to explicitly declare the type parameter that it binds, T, before using it to specify its trait type. Rust requires this declaration because the impl could also, for example, specify an implementation of Seq<int>. The trait type (appearing after the colon in the impl) refers to a type, rather than defining one.

The type parameters bound by a trait are in scope in each of the method declarations. So, re-declaring the type parameter T as an explicit type parameter for len, in either the trait or the impl, would be a compile-time error.

Within a trait definition, self is a special type that you can think of as a type parameter. An implementation of the trait for any given type T replaces the self type parameter with T. Simply, in a trait, self is a type, and in an impl, self is a value. The following trait describes types that support an equality operation:

// In a trait, `self` refers to the type implementing the trait
trait Eq {
  fn equals(other: &self) -> bool;
}

// In an impl, self refers to the value of the receiver
impl int: Eq {
  fn equals(other: &int) -> bool { *other == self }
}

Notice that in the trait definition, equals takes a parameter of type self. In contrast, in the impl, equals takes a parameter of type int, and uses self as the name of the receiver (analogous to the this pointer in C++).

Bounded type parameters and static method dispatch

Traits give us a language for defining predicates on types, or abstract properties that types can have. We can use this language to define bounds on type parameters, so that we can then operate on generic types.

# trait Printable { fn print(); }
fn print_all<T: Printable>(printable_things: ~[T]) {
    for printable_things.each |thing| {
        thing.print();
    }
}

Declaring T as conforming to the Printable trait (as we earlier did with Copy) makes it possible to call methods from that trait on values of type T inside the function. It will also cause a compile-time error when anyone tries to call print_all on an array whose element type does not have a Printable implementation.

Type parameters can have multiple bounds by separating them with spaces, as in this version of print_all that copies elements.

# trait Printable { fn print(); }
fn print_all<T: Printable Copy>(printable_things: ~[T]) {
    let mut i = 0;
    while i < printable_things.len() {
        let copy_of_thing = printable_things[i];
        copy_of_thing.print();
        i += 1;
    }
}

Method calls to bounded type parameters are statically dispatched, imposing no more overhead than normal function invocation, so are the preferred way to use traits polymorphically.

This usage of traits is similar to Haskell type classes.

Casting to a trait type and dynamic method dispatch

The above allows us to define functions that polymorphically act on values of a single unknown type that conforms to a given trait. However, consider this function:

# type Circle = int; type Rectangle = int;
# impl int: Drawable { fn draw() {} }
# fn new_circle() -> int { 1 }
trait Drawable { fn draw(); }

fn draw_all<T: Drawable>(shapes: ~[T]) {
    for shapes.each |shape| { shape.draw(); }
}
# let c: Circle = new_circle();
# draw_all(~[c]);

You can call that on an array of circles, or an array of squares (assuming those have suitable Drawable traits defined), but not on an array containing both circles and squares. When such behavior is needed, a trait name can alternately be used as a type.

# trait Drawable { fn draw(); }
fn draw_all(shapes: &[@Drawable]) {
    for shapes.each |shape| { shape.draw(); }
}

In this example, there is no type parameter. Instead, the @Drawable type denotes any managed box value that implements the Drawable trait. To construct such a value, you use the as operator to cast a value to a trait type:

# type Circle = int; type Rectangle = bool;
# trait Drawable { fn draw(); }
# fn new_circle() -> Circle { 1 }
# fn new_rectangle() -> Rectangle { true }
# fn draw_all(shapes: &[@Drawable]) {}

impl @Circle: Drawable { fn draw() { ... } }

impl @Rectangle: Drawable { fn draw() { ... } }

let c: @Circle = @new_circle();
let r: @Rectangle = @new_rectangle();
draw_all([c as @Drawable, r as @Drawable]);

We omit the code for new_circle and new_rectangle; imagine that these just return Circles and Rectangles with a default size. Note that, like strings and vectors, trait types have dynamic size and may only be referred to via one of the pointer types. That's why the impl is defined for @Circle and @Rectangle instead of for just Circle and Rectangle. Other pointer types work as well.

# type Circle = int; type Rectangle = int;
# trait Drawable { fn draw(); }
# impl int: Drawable { fn draw() {} }
# fn new_circle() -> int { 1 }
# fn new_rectangle() -> int { 2 }
// A managed trait instance
let boxy: @Drawable = @new_circle() as @Drawable;
// An owned trait instance
let owny: ~Drawable = ~new_circle() as ~Drawable;
// A borrowed trait instance
let stacky: &Drawable = &new_circle() as &Drawable;

Note: Other pointer types actually do not work here yet. This is an evolving corner of the language.

Method calls to trait types are dynamically dispatched. Since the compiler doesn't know specifically which functions to call at compile time it uses a lookup table (also known as a vtable or dictionary) to select the method to call at runtime.

This usage of traits is similar to Java interfaces.

Modules and crates

The Rust namespace is arranged in a hierarchy of modules. Each source (.rs) file represents a single module and may in turn contain additional modules.

mod farm {
    pub fn chicken() -> &str { "cluck cluck" }
    pub fn cow() -> &str { "mooo" }
}

fn main() {
    io::println(farm::chicken());
}

The contents of modules can be imported into the current scope with the use keyword, optionally giving it an alias. use may appear at the beginning of crates, mods, fns, and other blocks.

# mod farm { pub fn chicken() { } }
# fn main() {
// Bring `chicken` into scope
use farm::chicken;

fn chicken_farmer() {
    // The same, but name it `my_chicken`
    use my_chicken = farm::chicken;
    ...
}
# }

These farm animal functions have a new keyword, pub, attached to them. The pub keyword modifies an item's visibility, making it visible outside its containing module. An expression with ::, like farm::chicken, can name an item outside of its containing module. Items, such as those declared with fn, struct, enum, type, or const, are module-private by default.

Visibility restrictions in Rust exist only at module boundaries. This is quite different from most object-oriented languages that also enforce restrictions on objects themselves. That's not to say that Rust doesn't support encapsulation: both struct fields and methods can be private. But this encapsulation is at the module level, not the struct level. Note that fields and methods are public by default.

mod farm {
# pub fn make_me_a_farm() -> farm::Farm { farm::Farm { chickens: ~[], cows: ~[], farmer: Human(0) } }
    pub struct Farm {
        priv mut chickens: ~[Chicken],
        priv mut cows: ~[Cow],
        farmer: Human
    }

    // Note - visibility modifiers on impls currently have no effect
    impl Farm {
        priv fn feed_chickens() { ... }
        priv fn feed_cows() { ... }
        fn add_chicken(c: Chicken) { ... }
    }

    pub fn feed_animals(farm: &Farm) {
        farm.feed_chickens();
        farm.feed_cows();
    }
}

fn main() {
     let f = make_me_a_farm();
     f.add_chicken(make_me_a_chicken());
     farm::feed_animals(&f);
     f.farmer.rest();
}
# type Chicken = int;
# type Cow = int;
# enum Human = int;
# fn make_me_a_farm() -> farm::Farm { farm::make_me_a_farm() }
# fn make_me_a_chicken() -> Chicken { 0 }
# impl Human { fn rest() { } }

Crates

The unit of independent compilation in Rust is the crate: rustc compiles a single crate at a time, from which it produces either a library or executable.

When compiling a single .rs file, the file acts as the whole crate. You can compile it with the --lib compiler switch to create a shared library, or without, provided that your file contains a fn main somewhere, to create an executable.

Larger crates typically span multiple files and are compiled from a crate (.rc) file. Crate files contain their own syntax for loading modules from .rs files and typically include metadata about the crate.

#[link(name = "farm", vers = "2.5", author = "mjh")];
#[crate_type = "lib"];

mod cow;
mod chicken;
mod horse;

Compiling this file will cause rustc to look for files named cow.rs, chicken.rs, and horse.rs in the same directory as the .rc file, compile them all together, and, based on the presence of the crate_type = "lib" attribute, output a shared library or an executable. (If the line #[crate_type = "lib"]; was omitted, rustc would create an executable.)

The #[link(...)] attribute provides meta information about the module, which other crates can use to load the right module. More about that later.

To have a nested directory structure for your source files, you can nest mods in your .rc file:

mod poultry {
    mod chicken;
    mod turkey;
}

The compiler will now look for poultry/chicken.rs and poultry/turkey.rs, and export their content in poultry::chicken and poultry::turkey. You can also provide a poultry.rs to add content to the poultry module itself.

When compiling .rc files, if rustc finds a .rs file with the same name, then that .rs file provides the top-level content of the crate.

// foo.rc
#[link(name = "foo", vers="1.0")];

mod bar;

// foo.rs
fn main() { bar::baz(); }

Note

: The way rustc looks for .rs files to pair with .rc files is a major source of confusion and will change. It's likely that the crate and source file grammars will merge.

Note

: The way that directory modules are handled will also change. The code for directory modules currently lives in a .rs file with the same name as the directory, next to the directory. A new scheme will make that file live inside the directory.

Using other crates

The extern mod directive lets you use a crate (once it's been compiled into a library) from inside another crate. extern mod can appear at the top of a crate file or at the top of modules. It will cause the compiler to look in the library search path (which you can extend with the -L switch) for a compiled Rust library with the right name, then add a module with that crate's name into the local scope.

For example, extern mod std links the standard library.

When a comma-separated list of name/value pairs appears after extern mod, the compiler front-end matches these pairs against the attributes provided in the link attribute of the crate file. The front-end will only select this crate for use if the actual pairs match the declared attributes. You can provide a name value to override the name used to search for the crate.

Our example crate declared this set of link attributes:

#[link(name = "farm", vers = "2.5", author = "mjh")];

Which you can then link with any (or all) of the following:

extern mod farm;
extern mod my_farm (name = "farm", vers = "2.5");
extern mod my_auxiliary_farm (name = "farm", author = "mjh");

If any of the requested metadata do not match, then the crate will not be compiled successfully.

A minimal example

Now for something that you can actually compile yourself. We have these two files:

// world.rs
#[link(name = "world", vers = "1.0")];
pub fn explore() -> &str { "world" }

// main.rs
extern mod world;
fn main() { io::println("hello " + world::explore()); }

Now compile and run like this (adjust to your platform if necessary):

> rustc --lib world.rs  # compiles libworld-94839cbfe144198-1.0.so
> rustc main.rs -L .    # compiles main
> ./main
"hello world"

Notice that the library produced contains the version in the filename as well as an inscrutable string of alphanumerics. These are both part of Rust's library versioning scheme. The alphanumerics are a hash representing the crate metadata.

The core library

The Rust core library is the language runtime and contains required memory management and task scheduling code as well as a number of modules necessary for effective usage of the primitive types. Methods on vectors and strings, implementations of most comparison and math operators, and pervasive types like Option and Result live in core.

All Rust programs link to the core library and import its contents, as if the following were written at the top of the crate.

extern mod core;
use core::*;

What next?

Now that you know the essentials, check out any of the additional tutorials on individual topics.

• Borrowed pointers
• Tasks and communication
• Macros
• The foreign function interface

There is further documentation on the wiki, including articles about unit testing in Rust, documenting and packaging Rust code, and a discussion of the attributes used to apply metada to code.