rust/doc/guide-pointers.md

% The Rust Pointer Guide

Rust's pointers are one of its more unique and compelling features. Pointers are also one of the more confusing topics for newcomers to Rust. They can also be confusing for people coming from other languages that support pointers, such as C++. This tutorial will help you understand this important topic.

You don't actually need pointers

I have good news for you: you probably don't need to care about pointers, especially as you're getting started. Think of it this way: Rust is a language that emphasizes safety. Pointers, as the joke goes, are very pointy: it's easy to accidentally stab yourself. Therefore, Rust is made in a way such that you don't need them very often.

"But tutorial!" you may cry. "My co-worker wrote a function that looks like this:

fn succ(x: &int) -> int { *x + 1 }

So I wrote this code to try it out:

fn main() {
    let number = 5;
    let succ_number = succ(number);
    println!("{}", succ_number);
}

And now I get an error:

error: mismatched types: expected `&int` but found `<VI0>` (expected &-ptr but found integral variable)

What gives? It needs a pointer! Therefore I have to use pointers!"

Turns out, you don't. All you need is a reference. Try this on for size:

# fn succ(x: &int) -> int { *x + 1 }
fn main() {
    let number = 5;
    let succ_number = succ(&number);
    println!("{}", succ_number);
}

It's that easy! One extra little & there. This code will run, and print 6.

That's all you need to know. Your co-worker could have written the function like this:

fn succ(x: int) -> int { x + 1 }

fn main() {
    let number = 5;
    let succ_number = succ(number);
    println!("{}", succ_number);
}

No pointers even needed. Then again, this is a simple example. I assume that your real-world succ function is more complicated, and maybe your co-worker had a good reason for x to be a pointer of some kind. In that case, references are your best friend. Don't worry about it, life is too short.

However.

Here are the use-cases for pointers. I've prefixed them with the name of the pointer that satisfies that use-case:

1. Owned: ~Trait must be a pointer, becuase you don't know the size of the object, so indirection is mandatory.
2. Owned: You need a recursive data structure. These can be infinite sized, so indirection is mandatory.
3. Owned: A very, very, very rare situation in which you have a huge chunk of data that you wish to pass to many methods. Passing a pointer will make this more efficient. If you're coming from another language where this technique is common, such as C++, please read "A note..." below.
4. Managed: Having only a single owner to a piece of data would be inconvenient or impossible. This is only often useful when a program is very large or very complicated. Using a managed pointer will activate Rust's garbage collection mechanism. 5: Borrowed: You're writing a function, and you need a pointer, but you don't care about its ownership. If you make the argument a borrowed pointer, callers can send in whatever kind they want.

Five exceptions. That's it. Otherwise, you shouldn't need them. Be skeptical of pointers in Rust: use them for a deliberate purpose, not just to make the compiler happy.

A note for those proficient in pointers

If you're coming to Rust from a language like C or C++, you may be used to passing things by reference, or passing things by pointer. In some langauges, like Java, you can't even have objects without a pointer to them. Therefore, if you were writing this Rust code:

# fn transform(p: Point) -> Point { p }
struct Point {
    x: int,
    y: int,
}

fn main() {
    let p0 = Point { x: 5, y: 10};
    let p1 = transform(p0);
    println!("{:?}", p1);
}

I think you'd implement transform like this:

# struct Point {
#     x: int,
#     y: int,
# }
# let p0 = Point { x: 5, y: 10};
fn transform(p: &Point) -> Point {
    Point { x: p.x + 1, y: p.y + 1}
}

// and change this:
let p1 = transform(&p0);

This does work, but you don't need to create those references! The better way to write this is simply:

struct Point {
    x: int,
    y: int,
}

fn transform(p: Point) -> Point {
    Point { x: p.x + 1, y: p.y + 1}
}

fn main() {
    let p0 = Point { x: 5, y: 10};
    let p1 = transform(p0);
    println!("{:?}", p1);
}

But won't this be inefficent? Well, that's a complicated question, but it's important to know that Rust, like C and C++, store aggregate data types 'unboxed,' whereas languages like Java and Ruby store these types as 'boxed.' For smaller structs, this way will be more efficient. For larger ones, it may be less so. But don't reach for that pointer until you must! Make sure that the struct is large enough by performing some tests before you add in the complexity of pointers.

Owned Pointers

Owned pointers are the conceptually simplest kind of pointer in Rust. A rough approximation of owned pointers follows:

1. Only one owned pointer may exist to a particular place in memory. It may be borrowed from that owner, however.
2. The Rust compiler uses static analysis to determine where the pointer is in scope, and handles allocating and de-allocating that memory. Owned pointers are not garbage collected.

These two properties make for three use cases.

References to Traits

Traits must be referenced through a pointer, becuase the struct that implements the trait may be a different size than a different struct that implements the trait. Therefore, unboxed traits don't make any sense, and aren't allowed.

Recursive Data Structures

Sometimes, you need a recursive data structure. The simplest is known as a 'cons list':

enum List<T> {
    Nil,
    Cons(T, ~List<T>),
}
    
fn main() {
    let list: List<int> = Cons(1, ~Cons(2, ~Cons(3, ~Nil)));
    println!("{:?}", list);
}

This prints:

Cons(1, ~Cons(2, ~Cons(3, ~Nil)))

The inner lists must be an owned pointer, becuase we can't know how many elements are in the list. Without knowing the length, we don't know the size, and therefore require the indirection that pointers offer.

Efficiency

This should almost never be a concern, but because creating an owned pointer boxes its value, it therefore makes referring to the value the size of the box. This may make passing an owned pointer to a function less expensive than passing the value itself. Don't worry yourself with this case until you've proved that it's an issue through benchmarks.

For example, this will work:

struct Point {
    x: int,
    y: int,
}

fn main() {
    let a = Point { x: 10, y: 20 };
    do spawn {
        println(a.x.to_str());
    }
}

This struct is tiny, so it's fine. If Point were large, this would be more efficient:

struct Point {
    x: int,
    y: int,
}

fn main() {
    let a = ~Point { x: 10, y: 20 };
    do spawn {
        println(a.x.to_str());
    }
}

Now it'll be copying a pointer-sized chunk of memory rather than the whole struct.

Managed Pointers

Managed pointers, notated by an @, are used when having a single owner for some data isn't convenient or possible. This generally happens when your program is very large and complicated.

For example, let's say you're using an owned pointer, and you want to do this:

struct Point {
    x: int,
    y: int,
}
    
fn main() {
    let a = ~Point { x: 10, y: 20 };
    let b = a;
    println(b.x.to_str());
    println(a.x.to_str());
}

You'll get this error:

test.rs:10:12: 10:13 error: use of moved value: `a`
test.rs:10     println(a.x.to_str());
                       ^
test.rs:8:8: 8:9 note: `a` moved here because it has type `~Point`, which is moved by default (use `ref` to override)
test.rs:8     let b = a;
                  ^

As the message says, owned pointers only allow for one owner at a time. When you assign a to b, a becomes invalid. Change your code to this, however:

struct Point {
    x: int,
    y: int,
}
    
fn main() {
    let a = @Point { x: 10, y: 20 };
    let b = a;
    println(b.x.to_str());
    println(a.x.to_str());
}

And it works:

10
10

So why not just use managed pointers everywhere? There are two big drawbacks to managed pointers:

1. They activate Rust's garbage collector. Other pointer types don't share this drawback.
2. You cannot pass this data to another task. Shared ownership across concurrency boundaries is the source of endless pain in other langauges, so Rust does not let you do this.

Borrowed Pointers

Borrowed pointers are the third major kind of pointer Rust supports. They are simultaneously the simplest and the most complicated kind. Let me explain: they're called 'borrowed' pointers because they claim no ownership over the data they're pointing to. They're just borrowing it for a while. So in that sense, they're simple: just keep whatever ownership the data already has. For example:

use std::num::sqrt;

struct Point {
    x: f32,
    y: f32,
}

fn compute_distance(p1: &Point, p2: &Point) -> f32 {
    let x_d = p1.x - p2.x;
    let y_d = p1.y - p2.y;

    sqrt(x_d * x_d + y_d * y_d)
}

fn main() {
    let origin = @Point { x: 0.0, y: 0.0 };
    let p1     = ~Point { x: 5.0, y: 3.0 };

    println!("{:?}", compute_distance(origin, p1));
}

This prints 5.83095189. You can see that the compute_distance function takes in two borrowed pointers, but we give it a managed and unique pointer. Of course, if this were a real program, we wouldn't have any of these pointers, they're just there to demonstrate the concepts.

So how is this hard? Well, because we're igorning ownership, the compiler needs to take great care to make sure that everything is safe. Despite their complete safety, a borrowed pointer's representation at runtime is the same as that of an ordinary pointer in a C program. They introduce zero overhead. The compiler does all safety checks at compile time.

This theory is called 'region pointers,' and involve a concept called 'lifetimes'. Here's the simple explanation: would you expect this code to compile?

fn main() {
    println(x.to_str());
    let x = 5;
}

Probably not. That's becuase you know that the name x is valid from where it's declared to when it goes out of scope. In this case, that's the end of the main function. So you know this code will cause an error. We call this duration a 'lifetime'. Let's try a more complex example:

fn main() {
    let mut x = ~5;
    if(*x < 10) {
        let y = &x;
        println!("Oh no: {:?}", y);
        return;
    }
    *x = *x - 1;
    println!("Oh no: {:?}", x);
}

Here, we're borrowing a pointer to x inside of the if. The compiler, however, is able to determine that that pointer will go out of scope without x being mutated, and therefore, lets us pass. This wouldn't work:

fn main() {
    let mut x = ~5;
    if(*x < 10) {
        let y = &x;
        *x = *x - 1;

        println!("Oh no: {:?}", y);
        return;
    }
    *x = *x - 1;
    println!("Oh no: {:?}", x);
}

It gives this error:

test.rs:5:8: 5:10 error: cannot assign to `*x` because it is borrowed
test.rs:5         *x = *x - 1;
                  ^~
test.rs:4:16: 4:18 note: borrow of `*x` occurs here
test.rs:4         let y = &x;
                          ^~

As you might guess, this kind of analysis is complex for a human, and therefore hard for a computer, too! There is an entire tutorial devoted to borrowed pointers and lifetimes that goes into lifetimes in great detail, so if you want the full details, check that out.

Returning Pointers

We've talked a lot about funtions that accept various kinds of pointers, but what about returning them? Here's the rule of thumb: only return a unique or managed pointer if you were given one in the first place.

What does that mean? Don't do this:

fn foo(x: ~int) -> ~int {
    return ~*x;
}

fn main() {
    let x = ~5;
    let y = foo(x);
}

Do this:

fn foo(x: ~int) -> int {
    return *x;
}

fn main() {
    let x = ~5;
    let y = ~foo(x);
}

This gives you flexibility, without sacrificing performance. For example, this will also work:

fn foo(x: ~int) -> int {
    return *x;
}

fn main() {
    let x = ~5;
    let y = @foo(x);
}

You may think that this gives us terrible performance: return a value and then immediately box it up?!?! Isn't that the worst of both worlds? Rust is smarter than that. There is no copy in this code. main allocates enough room for the @int, passes it into foo as x, and then foo writes the value into the new box. This writes the return value directly into the allocated box.

This is important enough that it bears repeating: pointers are not for optimizing returning values from your code. Allow the caller to choose how they want to use your output.

Related Resources

• Lifetimes tutorial