Various diagnostics clean ups/tweaks
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Avoid cloning ExpnData to access Span edition
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
r? `@ghost` -- opening for a perf run to start with
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Use diagnostic items instead of lang items for rfc2229 migrations
This PR removes the `Send`, `UnwindSafe` and `RefUnwindSafe` lang items introduced in https://github.com/rust-lang/rust/pull/84730, and uses diagnostic items instead to check for `Send`, `UnwindSafe` and `RefUnwindSafe` traits for RFC2229 migrations.
r? ```@nikomatsakis```
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
Avoid byte to char position conversions in `is_multiline`
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
The sha-1 and md-5 packages contain crates named sha1 and md5,
respectively. This discrepancy makes it somewhat more challenging to
automate detection of unused crates. Explicitly rename the packages to
the names of the crates they contain, to simplify such detection.
Better errors for Debug and Display traits
Currently, if someone tries to pass value that does not implement `Debug` or `Display` to a formatting macro, they get a very verbose and confusing error message. This PR changes the error messages for missing `Debug` and `Display` impls to be less overwhelming in this case, as suggested by #85844. I was a little less aggressive in changing the error message than that issue proposed. Still, this implementation would be enough to reduce the number of messages to be much more manageable.
After this PR, information on the cause of an error involving a `Debug` or `Display` implementation would suppressed if the requirement originated within a standard library macro. My reasoning was that errors originating from within a macro are confusing when they mention details that the programmer can't see, and this is particularly problematic for `Debug` and `Display`, which are most often used via macros. It is possible that either a broader or a narrower criterion would be better. I'm quite open to any feedback.
Fixes#85844.
Disambiguate between SourceFiles from different crates even if they have the same path
This PR fixes an ICE that can occur when the compiler encounters a source file that is part of both the local crate and an upstream crate:
1. While importing source files from an upstream crate the compiler creates a `SourceFile` entry for `foo.rs` in the `SourceMap`. Since this is an imported source file its `src` field is `None`.
2. At a later point the parser encounters `foo.rs` again. It tells the `SourceMap` to load the file but because we already have an entry for `foo.rs` the `SourceMap` will return the existing version with `src == None`.
3. The parser proceeds under the assumption that `src.is_some()` and panics when actually trying to use the file's contents.
This PR fixes the issue by adding the source file's associated `CrateNum` to the `SourceMap`'s interning key. As a consequence the two instances of the file will each have a separate entry in the `SourceMap`. They just happen to share the same file path. This approach seemed less problematic to me than trying to mutate the `SourceFile` after it had already been created.
Another, more involved, approach might be to merge the `src` and the `external_src` field.
Fixes#85955
Add `future_prelude_collision` lint
Implements #84594. (RFC rust-lang/rfcs#3114 ([rendered](https://github.com/rust-lang/rfcs/blob/master/text/3114-prelude-2021.md))) Not entirely complete but wanted to have my progress decently available while I finish off the last little bits.
Things left to implement:
* [x] UI tests for lints
* [x] Only emit lint for 2015 and 2018 editions
* [ ] Lint name/message bikeshedding
* [x] Implement for `FromIterator` (from best I can tell, the current approach as mentioned from [this comment](https://github.com/rust-lang/rust/issues/84594#issuecomment-847288288) won't work due to `FromIterator` instances not using dot-call syntax, but if I'm correct about this then that would also need to be fixed for `TryFrom`/`TryInto`)*
* [x] Add to `rust-2021-migration` group? (See #85512) (added to `rust-2021-compatibility` group)
* [ ] Link to edition guide in lint docs
*edit: looked into it, `lookup_method` will also not be hit for `TryFrom`/`TryInto` for non-dotcall syntax. If anyone who is more familiar with typecheck knows the equivalent for looking up associated functions, feel free to chime in.
Add MIR pass to lower call to `core::slice::len` into `Len` operand
During some larger experiment with range analysis I've found that code like `let l = slice.len()` produces different MIR then one found in bound checks. This optimization pass replaces terminators that are calls to `core::slice::len` with just a MIR operand and Goto terminator.
It uses some heuristics to remove the outer borrow that is made to call `core::slice::len`, but I assume it can be eliminated, just didn't find how.
Would like to express my gratitude to `@oli-obk` who helped me a lot on Zullip
