4580: Fix invoking cargo without consulting CARGO env var or standard installation paths r=matklad a=Veetaha
Followup for #4329
The pr essentially fixes [this bug](https://youtu.be/EzQ7YIIo1rY?t=2189)
cc @lefticus
Co-authored-by: veetaha <veetaha2@gmail.com>
As per matklad, we now pass the responsibility for finding the binary to the frontend.
Also, added caching for finding the binary path to reduce
the amount of filesystem interactions.
Fills in server information.
Derives CodeAction capabilities from the client. If code action literals
are unsupported we fall back to the "simple support" which just sends back
commands (this is already supported in our config). The difference being
that we did not adjust our server capabilities so that if the client was
checking for `CodeActionProvider: "true"` in the response that would have failed.
4406: Update cargo-metadata r=matklad a=edwin0cheng
This PR update `cargo-metadata` to 0.10.0 and it also relax the` serde-derive` deps to 1.0 for tests in `proc-macro-srv`.
cc @robojumper
r= @matklad , I think you would have something to say related to https://github.com/serde-rs/json/issues/647#issue-593788429 ?
4410: Improve wording in comment r=matklad a=edwin0cheng
4411: do not remove then block when you unwrap else block #4361 r=matklad a=bnjjj
close#4361
4417: Omit default types in HirDisplay SourceCode mode r=matklad a=TimoFreiberg
Closes#4390
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
Co-authored-by: Benjamin Coenen <5719034+bnjjj@users.noreply.github.com>
Co-authored-by: Timo Freiberg <timo.freiberg@gmail.com>
4329: Look for `cargo`, `rustc`, and `rustup` in standard installation path r=matklad a=cdisselkoen
Discussed in #3118. This is approximately a 90% fix for the issue described there.
This PR creates a new crate `ra_env` with a function `get_path_for_executable()`; see docs there. `get_path_for_executable()` improves and generalizes the function `cargo_binary()` which was previously duplicated in the `ra_project_model` and `ra_flycheck` crates. (Both of those crates now depend on the new `ra_env` crate.) The new function checks (e.g.) `$CARGO` and `$PATH`, but also falls back on `~/.cargo/bin` manually before erroring out. This should allow most users to not have to worry about setting the `$CARGO` or `$PATH` variables for VSCode, which can be difficult e.g. on macOS as discussed in #3118.
I've attempted to replace all calls to `cargo`, `rustc`, and `rustup` in rust-analyzer with appropriate invocations of `get_path_for_executable()`; I don't think I've missed any in Rust code, but there is at least one invocation in TypeScript code which I haven't fixed. (I'm not sure whether it's affected by the same problem or not.) a4778ddb7a/editors/code/src/cargo.ts (L79)
I'm sure this PR could be improved a bunch, so I'm happy to take feedback/suggestions on how to solve this problem better, or just bikeshedding variable/function/crate names etc.
cc @Veetaha
Fixes#3118.
Co-authored-by: Craig Disselkoen <craigdissel@gmail.com>
Co-authored-by: veetaha <veetaha2@gmail.com>
3958: Add proc-macro related config and tests r=matklad a=edwin0cheng
This PR do the following things:
1. Add cli argument `proc-macro` for running proc-macro server.
2. Added support for proc-macro in bench and analysis-stats
3. Added typescript config for proc-macros
4. Added an heavy test for proc-macros.
To test it out:
1. run `cargo xtask install --proc-macro`
2. add `"rust-analyzer.cargo.loadOutDirsFromCheck": true"` and `"rust-analyzer.procMacro.enabled": true"` in vs code config.
[Edit] Change to use `rust-analyzer proc-macro` for running proc-macro standalone process.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
3964: Nicer Chalk debug logs r=matklad a=flodiebold
I'm looking at a lot of Chalk debug logs at the moment, so here's a few changes to make them slightly nicer...
3965: Implement inline associated type bounds r=matklad a=flodiebold
Like `Iterator<Item: SomeTrait>`.
This is an unstable feature, but it's used in the standard library e.g. in the definition of Flatten, so we can't get away with not implementing it :)
(This is cherry-picked from my recursive solver branch, where it works better, but I did manage to write a test that works with the current Chalk solver as well...)
3967: Handle `Self::Type` in trait definitions when referring to own associated type r=matklad a=flodiebold
It was implemented for other generic parameters for the trait, but not for `Self`.
(Last one off my recursive solver branch 😄 )
Co-authored-by: Florian Diebold <flodiebold@gmail.com>
3920: Implement expand_task and list_macros in proc_macro_srv r=matklad a=edwin0cheng
This PR finish up the remain `proc_macro_srv` implementation :
1. Added dylib loading code for proc-macro crate dylib. Note that we have to add some special flags for unix loading because of a bug in old version of glibc, see https://github.com/fedochet/rust-proc-macro-panic-inside-panic-expample/issues/1 and https://github.com/rust-lang/rust/issues/60593 for details.
2. Added tests for proc-macro expansion: We use a trick here by adding `serde_derive` to dev-dependencies and calling `cargo-metadata` for searching its dylib path, and expand it in our tests.
[EDIT]
Note that this PR **DO NOT** implement the final glue code with rust-analzyer and proc-macro-srv yet.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
Chalk now panics if we don't implement these methods and run with CHALK_DEBUG,
so I thought I'd try to implement them 'properly'. Sadly, it seems impossible to
do without transmuting lifetimes somewhere. The problem is that we need a `&dyn
HirDatabase` to get names etc., which we can't just put into TLS. I thought I
could just use `scoped-tls`, but that doesn't support references to unsized
types. So I put the `&dyn` into another struct and put the reference to *that*
into the TLS, but I have to transmute the lifetime to 'static for that to work.
3843: Remove rustc_lexer dependency in favour of rustc-ap-rustc_lexer r=est31 a=est31
The latter is auto-published on a regular schedule (Right now weekly).
See also https://github.com/alexcrichton/rustc-auto-publish
Co-authored-by: est31 <MTest31@outlook.com>
The big change here is counting binders, not
variables (https://github.com/rust-lang/chalk/pull/360). We have to adapt to the
same scheme for our `Ty::Bound`. It's mostly fine though, even makes some things
more clear.
3727: Introduce ra_proc_macro r=matklad a=edwin0cheng
This PR implemented:
1. Reading dylib path of proc-macro crate from cargo check , similar to how `OUTDIR` is obtained.
2. Added a new crate `ra_proc_macro` and implement the foot-work for reading result from external proc-macro expander.
3. Added a struct `ProcMacroClient` , which will be responsible to the client side communication to the External process.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
3157: Extend analysis-stats a bit r=matklad a=flodiebold
This adds some tools helpful when debugging nondeterminism in analysis-stats:
- a `--randomize` option that analyses everything in random order
- a `-vv` option that prints even more detail
Also add a debug log if Chalk fuel is exhausted (which would be a source of
nondeterminism, but didn't happen in my tests).
I found one source of nondeterminism (rust-lang/chalk#331), but there are still
other cases remaining.
Co-authored-by: Florian Diebold <flodiebold@gmail.com>
This adds some tools helpful when debugging nondeterminism in analysis-stats:
- a `--randomize` option that analyses everything in random order
- a `-vv` option that prints even more detail
Also add a debug log if Chalk fuel is exhausted (which would be a source of
nondeterminism, but didn't happen in my tests).
I found one source of nondeterminism (rust-lang/chalk#331), but there are still
other cases remaining.
3062: Implement slice pattern AST > HIR lowering r=jplatte a=jplatte
WIP. The necessary changes for parsing are implemented, but actual inference is not yet. Just wanted to upload what I've got so far so it doesn't get duplicated :)
Will fix#3043
Co-authored-by: Jonas Platte <jplatte+git@posteo.de>
This intention is pretty slow for `impl Interator`, because it has a
ton of default methods which need to be substituted.
The proper fix here is to not compute the actual edit until the user
triggers the action, but that's awkward to do in the LSP right now, so
let's just put a profiling code for now.
