[rustdoc] Switch to Symbol for item.name
This decreases the size of `Item` from 680 to 616 bytes. It also does a
lot less work since it no longer has to copy as much.
Helps with #79103.
r? `@GuillaumeGomez`
Fixes reported bugs in Rust Coverage
Fixes: #79569Fixes: #79566Fixes: #79565
For the first issue (#79569), I got hit a `debug_assert!()` before
encountering the reported error message (because I have `debug = true`
enabled in my config.toml).
The assertion showed me that some `SwitchInt`s can have more than one
target pointing to the same `BasicBlock`.
I had thought that was invalid, but since it seems to be possible, I'm
allowing this now.
I added a new test for this.
----
In the last two cases above, both tests (intentionally) fail to compile,
but the `InstrumentCoverage` pass is invoked anyway.
The MIR starts with an `Unreachable` `BasicBlock`, which I hadn't
encountered before. (I had assumed the `InstrumentCoverage` pass
would only be invoked with MIRs from successful compilations.)
I don't have test infrastructure set up to test coverage on files that
fail to compile, so I didn't add a new test.
r? `@tmandry`
FYI: `@wesleywiser`
consider assignments of union field of ManuallyDrop type safe
Assigning to `Copy` union fields is safe because that assignment will never drop anything. However, with https://github.com/rust-lang/rust/pull/77547, unions may also have `ManuallyDrop` fields, and their assignments are currently still unsafe. That seems unnecessary though, as assigning `ManuallyDrop` does not drop anything either, and is thus safe even for union fields.
I assume this will at least require FCP.
[mir-opt] Allow debuginfo to be generated for a constant or a Place
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Adds checks for:
* `no_core` attribute
* explicitly-enabled `legacy` symbol mangling
* mir_opt_level > 1 (which enables inlining)
I removed code from the `Inline` MIR pass that forcibly disabled
inlining if `-Zinstrument-coverage` was set. The default `mir_opt_level`
does not enable inlining anyway. But if the level is explicitly set and
is greater than 1, I issue a warning.
The new warnings show up in tests, which is much better for diagnosing
potential option conflicts in these cases.
Improve error handling in `symbols` proc-macro
This improves how the `symbols` proc-macro handles errors.
If it finds an error in its input, the macro does not panic.
Instead, it still produces an output token stream. That token
stream will contain `compile_error!(...)` macro invocations.
This will still cause compilation to fail (which is what we want),
but it will prevent meaningless errors caused by the output not
containing symbols that the macro normally generates.
This solves a small (but annoying) problem. When you're editing
rustc_span/src/symbol.rs, and you get something wrong (dup
symbol name, misordered symbol), you want to get only the errors
that are relevant, not a burst of errors that are irrelevant.
This change also uses the correct Span when reporting errors,
so you get errors that point to the correct place in
rustc_span/src/symbol.rs where something is wrong.
This also adds several unit tests which test the `symbols` proc-macro.
This commit also makes it easy to run the `symbols` proc-macro
as an ordinary Cargo test. Just run `cargo test`. This makes it
easier to do development on the macro itself, such as running it
under a debugger.
This commit also uses the `Punctuated` type in `syn` for parsing
comma-separated lists, rather than doing it manually.
The output of the macro is not changed at all by this commit,
so rustc should be completely unchanged. This just improves
quality of life during development.
Properly capture trailing 'unglued' token
If we try to capture the `Vec<u8>` in `Option<Vec<u8>>`, we'll
need to capture a `>` token which was 'unglued' from a `>>` token.
The processing of unglueing a token for parsing purposes bypasses the
usual capturing infrastructure, so we currently lose the trailing `>`.
As a result, we fall back to the reparsed `TokenStream`, causing us to
lose spans.
This commit makes token capturing keep track of a trailing 'unglued'
token. Note that we don't need to care about unglueing except at the end
of the captured tokens - if we capture both the first and second unglued
tokens, then we'll end up capturing the full 'glued' token, which
already works correctly.
Recover on `const impl<> X for Y`
`@leonardo-m` mentioned that `const impl Foo for Bar` could be recovered from in #79287.
I'm not sure about the error strings as they are, I think it should probably be something like the error that `expected_one_of_not_found` makes + the suggestion to flip the keywords, but I'm not sure how exactly to do that. Also, I decided not to try to handle `const unsafe impl` or `unsafe const impl` cause I figured that `unsafe impl const` would be pretty rare anyway (if it's even valid?), and it wouldn't be worth making the code more messy.
Resolve enum field visibility correctly
Fixes#79593. 🎉
Previously, this code treated enum fields' visibility as if they were
struct fields. However, that's not correct because the visibility of a
struct field with `ast::VisibilityKind::Inherited` is private to the
module it's defined in, whereas the visibility of an *enum* field with
`ast::VisibilityKind::Inherited` is the visibility of the enum it
belongs to.
Remove an unused dependency that made `rustdoc` crash
Whilst struggling with https://github.com/rust-lang/rust/issues/79980 I discovered that this dependency was unused, and that made rustdoc crash. This PR removes it.
fix more clippy::complexity findings
fix clippy::unnecessary_filter_map
use if let Some(x) = .. instead of ...map(|x|) to conditionally run fns that return () (clippy::option_map_unit_fn)
fix clippy::{needless_bool, manual_unwrap_or}
don't clone types that are copy (clippy::clone_on_copy)
don't convert types into identical types with .into() (clippy::useless_conversion)
use strip_prefix over slicing (clippy::manual_strip)
r? ``@Dylan-DPC``
This improves how the `symbols` proc-macro handles errors.
If it finds an error in its input, the macro does not panic.
Instead, it still produces an output token stream. That token
stream will contain `compile_error!(...)` macro invocations.
This will still cause compilation to fail (which is what we want),
but it will prevent meaningless errors caused by the output not
containing symbols that the macro normally generates.
This solves a small (but annoying) problem. When you're editing
rustc_span/src/symbol.rs, and you get something wrong (dup
symbol name, misordered symbol), you want to get only the errors
that are relevant, not a burst of errors that are irrelevant.
This change also uses the correct Span when reporting errors,
so you get errors that point to the correct place in
rustc_span/src/symbol.rs where something is wrong.
This also adds several unit tests which test the `symbols` proc-macro.
This commit also makes it easy to run the `symbols` proc-macro
as an ordinary Cargo test. Just run `cargo test`. This makes it
easier to do development on the macro itself, such as running it
under a debugger.
This commit also uses the `Punctuated` type in `syn` for parsing
comma-separated lists, rather than doing it manually.
The output of the macro is not changed at all by this commit,
so rustc should be completely unchanged. This just improves
quality of life during development.
Previously, this code treated enum fields' visibility as if they were
struct fields. However, that's not correct because the visibility of a
struct field with `ast::VisibilityKind::Inherited` is private to the
module it's defined in, whereas the visibility of an *enum* field with
`ast::VisibilityKind::Inherited` is the visibility of the enum it
belongs to.
If we try to capture the `Vec<u8>` in `Option<Vec<u8>>`, we'll
need to capture a `>` token which was 'unglued' from a `>>` token.
The processing of unglueing a token for parsing purposes bypasses the
usual capturing infrastructure, so we currently lose the trailing `>`.
As a result, we fall back to the reparsed `TokenStream`, causing us to
lose spans.
This commit makes token capturing keep track of a trailing 'unglued'
token. Note that we don't need to care about unglueing except at the end
of the captured tokens - if we capture both the first and second unglued
tokens, then we'll end up capturing the full 'glued' token, which
already works correctly.
Create `rustc_type_ir`
Decided to start small 😄
This PR creates a `rustc_type_ir` crate as part of the WG-Traits plan to create a shared type library.
~~There already exists a `rustc_ty` crate, so I named the new crate `rustc_ty_library`. However I think it would make sense to rename the current `rustc_ty` to something else (e.g. `rustc_ty_passes`) to free the name for this new crate.~~
r? `@jackh726`
Fixes: #79569Fixes: #79566Fixes: #79565
For the first issue (#79569), I got hit a `debug_assert!()` before
encountering the reported error message (because I have `debug = true`
enabled in my config.toml).
The assertion showed me that some `SwitchInt`s can have more than one
target pointing to the same `BasicBlock`.
I had thought that was invalid, but since it seems to be possible, I'm
allowing this now.
I added a new test for this.
----
In the last two cases above, both tests (intentionally) fail to compile,
but the `InstrumentCoverage` pass is invoked anyway.
The MIR starts with an `Unreachable` `BasicBlock`, which I hadn't
encountered before. (I had assumed the `InstrumentCoverage` pass
would only be invoked with MIRs from successful compilations.)
I don't have test infrastructure set up to test coverage on files that
fail to compile, so I didn't add a new test.
Capture precise paths in THIR and MIR
This PR allows THIR and MIR to use the result of the new capture analysis to actually capture precise paths
To achieve we:
- Writeback min capture results to TypeckResults
- Move handling upvars to PlaceBuilder in mir_build
- Lower precise paths in THIR build by reading min_captures
- Search for ancestors in min_capture when trying to build a MIR place which starts off of an upvar
Closes: https://github.com/rust-lang/project-rfc-2229/issues/10
Partly implements: rust-lang/project-rfc-2229#18
Work that remains (not in this PR):
- [ ] [Known bugs when feature gate is enabled](https://github.com/rust-lang/project-rfc-2229/projects/1?card_filter_query=label%3Abug)
- [ ] Use min_capure_map for
- [ ] Liveness analysis
- [ ] rustc_mir/interpret/validity.rs
- [ ] regionck
- [ ] rust-lang/project-rfc-2229#8
- [ ] remove closure_captures and upvar_capture_map
r? `@ghost`
CTFE: tweak abort-on-uninhabited message
Having an "aborted execution:" makes it more consistent with the `Abort` terminator saying "the program aborted execution". Right now, at least one of the two errors will look weird in Miri.
r? `@oli-obk`
Use `def_path_hash_to_def_id` when re-using a `RawDefId`
Fixes#79890
Previously, we just copied a `RawDefId` from the 'old' map to the 'new'
map. However, the `RawDefId` for a given `DefPathHash` may be different
in the current compilation session. Using `def_path_hash_to_def_id`
ensures that the `RawDefId` we use is valid in the current session.
Use Symbol for inline asm register class names
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
This is part of work I am doing to improve how Symbol interning works.
Clarify the 'default is only allowed on...' error
Code like
impl Foo {
default fn foo() {}
}
will trigger the error
error: `default` is only allowed on items in `impl` definitions
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
but that's very confusing! I *did* put it on an item in an impl!
So this commit changes the message to
error: `default` is only allowed on items in trait impls
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
Dogfood `str_split_once()`
Part of https://github.com/rust-lang/rust/issues/74773.
Beyond increased clarity, this fixes some instances of a common confusion with how `splitn(2)` behaves: the first element will always be `Some()`, regardless of the delimiter, and even if the value is empty.
Given this code:
```rust
fn main() {
let val = "...";
let mut iter = val.splitn(2, '=');
println!("Input: {:?}, first: {:?}, second: {:?}", val, iter.next(), iter.next());
}
```
We get:
```
Input: "no_delimiter", first: Some("no_delimiter"), second: None
Input: "k=v", first: Some("k"), second: Some("v")
Input: "=", first: Some(""), second: Some("")
```
Using `str_split_once()` makes more clear what happens when the delimiter is not found.
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
Fixes#79890
Previously, we just copied a `RawDefId` from the 'old' map to the 'new'
map. However, the `RawDefId` for a given `DefPathHash` may be different
in the current compilation session. Using `def_path_hash_to_def_id`
ensures that the `RawDefId` we use is valid in the current session.
