Change to resolve and update compiler and libs for uses.
[breaking-change]
Enum variants are now in both the value and type namespaces. This means that
if you have a variant with the same name as a type in scope in a module, you
will get a name clash and thus an error. The solution is to either rename the
type or the variant.
Win32/WinSock APIs never call WSASetLastError() with WSAEINTR
unless a programmer specifically cancels the ongoing blocking call by
a deprecated WinSock1 API WSACancelBlockingCall().
So the errno check was simply removed and retry() became an id function
on Windows.
Note: Windows' equivalent of SIGINT is always handled in a separate thread:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms682541%28v=vs.85%29.aspx
"CTRL+C and CTRL+BREAK Signals"
Also, incidentally rename a type parameter and clean up some module imports.
This assert was likely inherited from some point, but it's not quite valid as a
no-timeout read may enter this loop, but data could be stolen by any other read
after the socket is deemed readable.
I saw this fail in a recent bors run where the assertion was tripped.
This assert was likely inherited from some point, but it's not quite valid as a
no-timeout read may enter this loop, but data could be stolen by any other read
after the socket is deemed readable.
I saw this fail in a recent bors run where the assertion was tripped.
This commits takes a similar strategy to the previous commit to implement
close_accept and clone for the native win32 pipes implementation.
Closes#15595
This commits implements {Tcp,Unix}Acceptor::{clone,close_accept} methods for
unix. A windows implementation is coming in a later commit.
The clone implementation is based on atomic reference counting (as with all
other clones), and the close_accept implementation is based on selecting on a
self-pipe which signals that a close has been seen.
The BSD socket code does some cast tricks with the `libc::sockaddr*`
structs, which causes useful data to be stored in struct padding.
Since Load/Store instructions do not copy struct padding, this makes
these structures dangerous to pass or return by value.
In particular, https://github.com/rust-lang/rust/issues/15763 changes
return semantics so that a Load instruction is used, breaking the TCP
code. Once this PR is merged, that one should merge without error.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This eliminates the last vestige of the `~` syntax.
Instead of `~self`, write `self: Box<TypeOfSelf>`; instead of `mut
~self`, write `mut self: Box<TypeOfSelf>`, replacing `TypeOfSelf` with
the self-type parameter as specified in the implementation.
Closes#13885.
[breaking-change]
POSIX has recvfrom(2) and sendto(2), but their name seem not to be
suitable with Rust. We already renamed getpeername(2) and
getsockname(2), so I think it makes sense.
Alternatively, `receive_from` would be fine. However, we have `.recv()`
so I chose `recv_from`.
Signed-off-by: OGINO Masanori <masanori.ogino@gmail.com>
Excluding the functions inherited from the cast module last week (with marked
stability levels), these functions received the following treatment.
* size_of - this method has become #[stable]
* nonzero_size_of/nonzero_size_of_val - these methods have been removed
* min_align_of - this method is now #[stable]
* pref_align_of - this method has been renamed without the
`pref_` prefix, and it is the "default alignment" now. This decision is in line
with what clang does (see url linked in comment on function). This function
is now #[stable].
* init - renamed to zeroed and marked #[stable]
* uninit - marked #[stable]
* move_val_init - renamed to overwrite and marked #[stable]
* {from,to}_{be,le}{16,32,64} - all functions marked #[stable]
* swap/replace/drop - marked #[stable]
* size_of_val/min_align_of_val/align_of_val - these functions are marked
#[unstable], but will continue to exist in some form. Concerns have been
raised about their `_val` prefix.
[breaking-change]
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
This is the last remaining networkig object to implement timeouts for. This
takes advantage of the CancelIo function and the already existing asynchronous
I/O functionality of pipes.
This commit has an implementation of the previous commit's timeout interface for
I/O objects on unix platforms. For implementation details, see the large comment
at the end of libnative/io/net.rs which talks about the general strategy taken.
Thankfully, all of these implementations can share code because they're
performing all the same operations.
This commit does not implement timeouts for named pipes on windows, only tcp/udp
objects on windows (which are quite similar to their unix equivalents).
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
This adds support for connecting to a unix socket with a timeout (a named pipe
on windows), and accepting a connection with a timeout. The goal is to bring
unix pipes/named sockets back in line with TCP support for timeouts.
Similarly to the TCP sockets, all methods are marked #[experimental] due to
uncertainty about the type of the timeout argument.
This internally involved a good bit of refactoring to share as much code as
possible between TCP servers and pipe servers, but the core implementation did
not change drastically as part of this commit.
cc #13523
This adds experimental support for timeouts when accepting sockets through
`TcpAcceptor::accept`. This does not add a separate `accept_timeout` function,
but rather it adds a `set_timeout` function instead. This second function is
intended to be used as a hard deadline after which all accepts will never block
and fail immediately.
This idea was derived from Go's SetDeadline() methods. We do not currently have
a robust time abstraction in the standard library, so I opted to have the
argument be a relative time in millseconds into the future. I believe a more
appropriate argument type is an absolute time, but this concept does not exist
yet (this is also why the function is marked #[experimental]).
The native support is built on select(), similarly to connect_timeout(), and the
green support is based on channel select and a timer.
cc #13523
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
Exposing ctpop, ctlz, cttz and bswap as taking signed i8/i16/... is just
exposing the internal LLVM names pointlessly (LLVM doesn't have "signed
integers" or "unsigned integers", it just has sized integer types
with (un)signed *operations*).
These operations are semantically working with raw bytes, which the
unsigned types model better.
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
