stabilize union with 'ManuallyDrop' fields and 'impl Drop for Union'
As [discussed by @SimonSapin and @withoutboats](https://github.com/rust-lang/rust/issues/55149#issuecomment-634692020), this PR proposes to stabilize parts of the `untagged_union` feature gate:
* It will be possible to have a union with field type `ManuallyDrop<T>` for any `T`.
* While at it I propose we also stabilize `impl Drop for Union`; to my knowledge, there are no open concerns around this feature.
In the RFC discussion, we also talked about allowing `&mut T` as another non-`Copy` non-dropping type, but that felt to me like an overly specific exception so I figured we'd wait if there is actually any use for such a special case.
Some things remain unstable and still require the `untagged_union` feature gate:
* Union with fields that do not drop, are not `Copy`, and are not `ManuallyDrop<_>`. The reason to not stabilize this is to avoid semver concerns around libraries adding `Drop` implementations later. (This is already not fully semver compatible as, to my knowledge, the borrow checker will exploit the non-dropping nature of any type, but it seems prudent to avoid further increasing the amount of trouble adding an `impl Drop` can cause.)
Due to this, quite a few tests still need the `untagged_union` feature, but I think the ones where I could remove the feature flag provide good test coverage for the stable part.
Cc @rust-lang/lang
POSIX leaves it implementation-defined whether `link` follows symlinks.
In practice, for example, on Linux it does not and on FreeBSD it does.
So, switch to `linkat`, so that we can pick a behavior rather than
depending on OS defaults.
Pick the option to not follow symlinks. This is somewhat arbitrary, but
seems the less surprising choice because hard linking is a very
low-level feature which requires the source and destination to be on
the same mounted filesystem, and following a symbolic link could end
up in a different mounted filesystem.
Cleanup cloudabi mutexes and condvars
This gets rid of lots of unnecessary unsafety.
All the AtomicU32s were wrapped in UnsafeCell or UnsafeCell<MaybeUninit>, and raw pointers were used to get to the AtomicU32 inside. This change cleans that up by using AtomicU32 directly.
Also replaces a UnsafeCell<u32> by a safer Cell<u32>.
@rustbot modify labels: +C-cleanup
Static mutex is static
StaticMutex is only ever used with as a static (as the name already suggests). So it doesn't have to be generic over a lifetime, but can simply assume 'static.
This 'static lifetime guarantees the object is never moved, so this is no longer a manually checked requirement for unsafe calls to lock().
@rustbot modify labels: +T-libs +A-concurrency +C-cleanup
For backtrace, use StaticMutex instead of a raw sys Mutex.
The code used the very unsafe `sys::mutex::Mutex` directly, and built its own unlock-on-drop wrapper around it. The StaticMutex wrapper already provides that and is easier to use safely.
@rustbot modify labels: +T-libs +C-cleanup
Use futex-based thread-parker for Wasm32.
This uses the existing `sys_common/thread_parker/futex.rs` futex-based thread parker (that was already used for Linux) for wasm32 as well (if the wasm32 atomics target feature is enabled, which is not the case by default).
Wasm32 provides the basic futex operations as instructions: https://webassembly.github.io/threads/syntax/instructions.html
These are now exposed from `sys::futex::{futex_wait, futex_wake}`, just like on Linux. So, `thread_parker/futex.rs` stays completely unmodified.
Refactor io/buffered.rs into submodules
This pull request splits `BufWriter`, `BufReader`, `LineWriter`, and `LineWriterShim` (along with their associated tests) into separate submodules. It contains no functional changes. This change is being made in anticipation of adding another type of buffered writer which can be switched between line- and block-buffering mode.
Part of a series of pull requests resolving #60673.
StaticMutex is only ever used with as a static (as the name already
suggests). So it doesn't have to be generic over a lifetime, but can
simply assume 'static.
This 'static lifetime guarantees the object is never moved, so this is
no longer a manually checked requirement for unsafe calls to lock().
The comment said it's UB to call lock() while it is locked. That'd be
quite a useless Mutex. :) It was supposed to say 'locked by the same
thread', not just 'locked'.
warning: the operation is ineffective. Consider reducing it to
`self.segments()[0]`
--> library/std/src/net/ip.rs:1265:9
|
1265 | (self.segments()[0] & 0xffff) == 0xfe80
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(clippy::identity_op)]` on by default
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[1]`
--> library/std/src/net/ip.rs:1266:16
|
1266 | && (self.segments()[1] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[2]`
--> library/std/src/net/ip.rs:1267:16
|
1267 | && (self.segments()[2] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
warning: the operation is ineffective. Consider reducing it to
`self.segments()[3]`
--> library/std/src/net/ip.rs:1268:16
|
1268 | && (self.segments()[3] & 0xffff) == 0
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#identity_op
Signed-off-by: wcampbell <wcampbell1995@gmail.com>
warning: struct update has no effect, all the fields in the struct have
already been specified
--> library/std/src/net/addr.rs:367:19
|
367 | ..unsafe { mem::zeroed() }
| ^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(clippy::needless_update)]` on by default
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#needless_update
Remove unsafety from sys/unsupported and add deny(unsafe_op_in_unsafe_fn).
Replacing `UnsafeCell`s by a `Cell`s simplifies things and makes the mutex and rwlock implementations safe. Other than that, only unsafety in strlen() contained unsafe code.
@rustbot modify labels: +F-unsafe-block-in-unsafe-fn +C-cleanup
Implement `AsRawFd` for `StdinLock` etc. on WASI.
WASI implements `AsRawFd` for `Stdin`, `Stdout`, and `Stderr`, so
implement it for `StdinLock`, `StdoutLock`, and `StderrLock` as well.
r? @alexcrichton
Avoid SeqCst or static mut in mach_timebase_info and QueryPerformanceFrequency caches
This patch went through a couple iterations but the end result is replacing a pattern where an `AtomicUsize` (updated with many SeqCst ops) guards a `static mut` with a single `AtomicU64` that is known to use 0 as a value indicating that it is not initialized.
The code in both places exists to cache values used in the conversion of Instants to Durations on macOS, iOS, and Windows.
I have no numbers to prove that this improves performance (It seems a little futile to benchmark something like this), but it's much simpler, safer, and in practice we'd expect it to be faster everywhere where Relaxed operations on AtomicU64 are cheaper than SeqCst operations on AtomicUsize, which is a lot of places.
Anyway, it also removes a bunch of unsafe code and greatly simplifies the logic, so IMO that alone would be worth it unless it was a regression.
If you want to take a look at the assembly output though, see https://godbolt.org/z/rbr6vn for x86_64, https://godbolt.org/z/cqcbqv for aarch64 (Note that this just the output of the mac side, but i'd expect the windows part to be the same and don't feel like doing another godbolt for it). There are several versions of this function in the godbolt:
- `info_new`: version in the current patch
- `info_less_new`: version in initial PR
- `info_original`: version currently in the tree
- `info_orig_but_better_orderings`: a version that just tries to change the original code's orderings from SeqCst to the (probably) minimal orderings required for soundness/correctness.
The biggest concern I have here is if we can use AtomicU64, or if there are targets that dont have it that this code supports. AFAICT: no. (If that changes in the future, it's easy enough to do something different for them)
r? `@Amanieu` because he caught a couple issues last time I tried to do a patch reducing orderings 😅
---
<details>
<summary>I rewrote this whole message so the original is inside here</summary>
I happened to notice the code we use for caching the result of mach_timebase_info uses SeqCst exclusively.
However, thinking a little more, it's actually pretty easy to avoid the static mut by packing the timebase info into an AtomicU64.
This entirely avoids needing to do the compare_exchange. The AtomicU64 can be read/written using Relaxed ops, which on current macos/ios platforms (x86_64/aarch64) have no overhead compared to direct loads/stores. This simplifies the code and makes it a lot safer too.
I have no numbers to prove that this improves performance (It seems a little futile to benchmark something like this), although it should do that on both targets it applies to.
That said, it also removes a bunch of unsafe code and simplifies the logic (arguably at least — there are only two states now, initialized or not), so I think it's a net win even without concrete numbers.
If you want to take a look at the assembly output though, see below. It has the new version, the original, and a version of the original with lower Orderings (which is still worse than the version in this PR)
- godbolt.org/z/obfqf9 x86_64-apple-darwin
- godbolt.org/z/Wz5cWc aarch64-unknown-linux-gnu (godbolt can't do aarch64-apple-ios but that doesn't matter here)
A different (and more efficient) option than this would be to just use the AtomicU64 and use the knowledge that after initialization the denominator should be nonzero... That felt like it's relying on too many things I'm not confident in, so I didn't want to do that.
</details>
rust-lang/rust#77147 simplifies things by splitting this Mutex type
into two types matching the two use cases: StaticMutex and MovableMutex.
To support the behavior of StaticMutex, we move part of the mutex
implementation into libstd.
doc: disambiguate stat in MetadataExt::as_raw_stat
A few architectures in `os::linux::raw` import `libc::stat`, rather than
defining that type directly. However, that also imports the _function_
called `stat`, which makes this doc link ambiguous:
error: `crate::os::linux::raw::stat` is both a struct and a function
--> library/std/src/os/linux/fs.rs:21:19
|
21 | /// [`stat`]: crate::os::linux::raw::stat
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ ambiguous link
|
= note: `-D broken-intra-doc-links` implied by `-D warnings`
help: to link to the struct, prefix with the item type
|
21 | /// [`stat`]: struct@crate::os::linux::raw::stat
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
help: to link to the function, add parentheses
|
21 | /// [`stat`]: crate::os::linux::raw::stat()
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
We want the `struct`, so it's now prefixed accordingly.
Link to documentation-specific guidelines.
Changed contribution information URL because it's not obvious how to get from the current URL to the documentation-specific content.
The current URL points to this "Getting Started" page, which contains nothing specific about documentation[*] and instead launches into how to *build* `rustc` which is not a strict prerequisite for contributing documentation fixes:
* https://rustc-dev-guide.rust-lang.org/getting-started.html
[*] The most specific content is a "Writing documentation" bullet point which is not itself a link to anything (I guess a patch for that might be helpful too).
### Why?
Making this change will make it easier for people who wish to make small "drive by" documentation fixes (and read contribution guidelines ;) ) which I find are often how I start contributing to a project. (Exhibit A: https://github.com/rust-lang/rust/pull/77050 :) )
### Background
My impression is the change of content linked is an unintentional change due to a couple of other changes:
* Originally, the link pointed to `contributing.md` which started with a "table of contents" linking to each section. But the content in `contributing.md` was removed and replaced with a link to the "Getting Started" section here:
* 3f6928f1f6 (diff-6a3371457528722a734f3c51d9238c13L1)
But the changed link doesn't actually point to the equivalent content, which is now located here:
* https://rustc-dev-guide.rust-lang.org/contributing.html
(If the "Guide to Rustc Development" is now considered the canonical location of "How to Contribute" content it might be a good idea to merge some of the "Contributing" Introduction section into the "Getting Started" section.)
* This was then compounded by changing the link from `contributing.md` to `contributing.html` here:
* https://github.com/rust-lang/rust/pull/74037/files#diff-242481015141f373dcb178e93cffa850L88
In order to even find the new location of the previous `contributing.md` content I ended up needing to do a GitHub search of the `rust-lang` org for the phrase "Documentation improvements are very welcome". :D
Fix error checking in posix_spawn implementation of Command
* Check for errors returned from posix_spawn*_init functions
* Check for non-zero return value from posix_spawn functions
A few architectures in `os::linux::raw` import `libc::stat`, rather than
defining that type directly. However, that also imports the _function_
called `stat`, which makes this doc link ambiguous:
error: `crate::os::linux::raw::stat` is both a struct and a function
--> library/std/src/os/linux/fs.rs:21:19
|
21 | /// [`stat`]: crate::os::linux::raw::stat
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ ambiguous link
|
= note: `-D broken-intra-doc-links` implied by `-D warnings`
help: to link to the struct, prefix with the item type
|
21 | /// [`stat`]: struct@crate::os::linux::raw::stat
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
help: to link to the function, add parentheses
|
21 | /// [`stat`]: crate::os::linux::raw::stat()
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
We want the `struct`, so it's now prefixed accordingly.
`DirEntry` contains a `ReadDir` handle, which used to just be a wrapper
on `Arc<InnerReadDir>`. Commit af75314ecd added `end_of_stream: bool`
which is not needed by `DirEntry`, but adds 8 bytes after padding. We
can let `DirEntry` have an `Arc<InnerReadDir>` directly to avoid that.
The posix_spawnattr_init & posix_spawn_file_actions_init might fail,
but their return code is not checked.
Check for non-zero return code and destroy only succesfully initialized
objects.
The cvt function compares the argument with -1 and when equal returns a new
io::Error constructed from errno. It is used together posix_spawn_* functions.
This is incorrect. Those functions do not set errno. Instead they return
non-zero error code directly.
Check for non-zero return code and use it to construct a new io::Error.
(docs): make mutex error comment consistent with codebase
Although exceptionally minor, I found this stands out from other error reporting language used in doc comments. With the existence of the `failure` crate, I suppose this could be slightly ambiguous. In any case, this change brings the particular comment into a consistent state with other mentions of returning errors.
Support static linking with glibc and target-feature=+crt-static
With this change, it's possible to build on a linux-gnu target and pass
RUSTFLAGS='-C target-feature=+crt-static' or the equivalent via a
`.cargo/config.toml` file, and get a statically linked executable.
Update to libc 0.2.78, which adds support for static linking with glibc.
Add `crt_static_respected` to the `linux_base` target spec.
Update `android_base` and `linux_musl_base` accordingly. Avoid enabling
crt_static_respected on Android platforms, since that hasn't been
tested.
Closes https://github.com/rust-lang/rust/issues/65447.
Minor `hash_map` doc adjustments + item attribute orderings
This PR is really a couple visual changes glued together:
1. Some of the doc comments for items in `std::collections::hash_map` referenced the names of types without escaping their formatting (e.g. using "VacantEntry" instead of "`VacantEntry`") - the ones I could find were changed to the latter
2. The vast majority of pre-item attributes seem to place doc comments as the first attribute (instead of things like `#[feature(...)]`), so the few that had the other order were changed.
3. Also ordering related: the general trend seems to be that `#[feature]` attributes follow `#[inline]`, so I swapped the two lines in places where that ordering was reversed. This is primarily a change based on stylistic continuity and aesthetics - I'm not sure how important that actually is / should be.
I figured this would be pretty uncontroversial, but some of these might have been intentional for reasons I don't know about - if so, I'd be happy to remove the relevant changes. Of these, the final set of changes is probably the most unnecessary, so it also might be better to leave those out (in favor of reducing code churn).
Unbox mutexes and condvars on some platforms
Both mutexes and condition variables contained a Box containing the actual os-specific object. This was done because moving these objects may cause undefined behaviour on some platforms.
However, this is not needed on Windows[1], Wasm[2], cloudabi[2], and 'unsupported'[3], were the box was only needlessly making them less efficient.
This change gets rid of the box on those platforms.
On those platforms, `Condvar` can no longer verify it is only used with one `Mutex`, as mutexes no longer have a stable address. This was addressed and considered acceptable in #76932.
[1]\: https://docs.microsoft.com/en-us/windows/win32/api/synchapi/nf-synchapi-initializesrwlock
[2]\: These are just a single atomic integer together with futex wait/wake calls/instructions.
[3]\: The `unsupported` platform doesn't support multiple threads at all.
Only use LOCAL_{STDOUT,STDERR} when set_{print/panic} is used.
The thread local `LOCAL_STDOUT` and `LOCAL_STDERR` are only used by the `test` crate to capture output from tests when running them in the same process in differen threads. However, every program will check these variables on every print, even outside of testing.
This involves allocating a thread local key, and registering a thread local destructor. This can be somewhat expensive.
This change keeps a global flag (`LOCAL_STREAMS`) which will be set to `true` when either of these local streams is used. (So, effectively only in test and benchmark runs.) When this flag is off, these thread locals are not even looked at and therefore will not be initialized on the first output on every thread, which also means no thread local destructors will be registered.
---
Together with https://github.com/rust-lang/rust/pull/77154, this should make output a little bit more efficient.
Fix Debug implementations of some of the HashMap and BTreeMap iterator types
HashMap's `ValuesMut`, BTreeMaps `ValuesMut`, IntoValues and `IntoKeys` structs were printing both keys and values on their Debug implementations. But they are iterators over either keys or values. Irrelevant values should not be visible. With this PR, they only show relevant fields.
This fixes#75297.
[Here's an example code.](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=0c79356ed860e347a0c1a205616f93b7) This prints this on nightly:
```
ValuesMut { inner: IterMut { range: [(1, "hello"), (2, "goodbye")], length: 2 } }
IntoKeys { inner: [(1, "hello"), (2, "goodbye")] }
IntoValues { inner: [(1, "hello"), (2, "goodbye")] }
[(2, "goodbye"), (1, "hello")]
```
After the patch this example prints these instead:
```
["hello", "goodbye"]
["hello", "goodbye"]
[1, 2]
["hello", "goodbye"]
```
I didn't add test cases for them, since I couldn't see any tests for Debug implementations anywhere. But please let me know if I should add it to a specific place.
r? @dtolnay
Use posix_spawn on musl targets
The posix_spawn had been available in a form suitable for use in a
Command implementation since musl 0.9.12. Use it in a preference to a
fork when possible, to benefit from CLONE_VM|CLONE_VFORK used there.
Previously `Command::spawn` would fall back to the non-posix_spawn based
implementation if the `PATH` environment variable was possibly changed.
On systems with a modern (g)libc `posix_spawn()` can be significantly
faster. If program is a path itself the `PATH` environment variable is
not used for the lookup and it should be safe to use the
`posix_spawnp()` method. [1]
We found this, because we have a cli application that effectively runs a
lot of subprocesses. It would sometimes noticeably hang while printing
output. Profiling showed that the process was spending the majority of
time in the kernel's `copy_page_range` function while spawning
subprocesses. During this time the process is completely blocked from
running, explaining why users were reporting the cli app hanging.
Through this we discovered that `std::process::Command` has a fast and
slow path for process execution. The fast path is backed by
`posix_spawnp()` and the slow path by fork/exec syscalls being called
explicitly. Using fork for process creation is supposed to be fast, but
it slows down as your process uses more memory. It's not because the
kernel copies the actual memory from the parent, but it does need to
copy the references to it (see `copy_page_range` above!). We ended up
using the slow path, because the command spawn implementation in falls
back to the slow path if it suspects the PATH environment variable was
changed.
Here is a smallish program demonstrating the slowdown before this code
change:
```
use std::process::Command;
use std::time::Instant;
fn main() {
let mut args = std::env::args().skip(1);
if let Some(size) = args.next() {
// Allocate some memory
let _xs: Vec<_> = std::iter::repeat(0)
.take(size.parse().expect("valid number"))
.collect();
let mut command = Command::new("/bin/sh");
command
.arg("-c")
.arg("echo hello");
if args.next().is_some() {
println!("Overriding PATH");
command.env("PATH", std::env::var("PATH").expect("PATH env var"));
}
let now = Instant::now();
let child = command
.spawn()
.expect("failed to execute process");
println!("Spawn took: {:?}", now.elapsed());
let output = child.wait_with_output().expect("failed to wait on process");
println!("Output: {:?}", output);
} else {
eprintln!("Usage: prog [size]");
std::process::exit(1);
}
()
}
```
Running it and passing different amounts of elements to use to allocate
memory shows that the time taken for `spawn()` can differ quite
significantly. In latter case the `posix_spawnp()` implementation is 30x
faster:
```
$ cargo run --release 10000000
...
Spawn took: 324.275µs
hello
$ cargo run --release 10000000 changepath
...
Overriding PATH
Spawn took: 2.346809ms
hello
$ cargo run --release 100000000
...
Spawn took: 387.842µs
hello
$ cargo run --release 100000000 changepath
...
Overriding PATH
Spawn took: 13.434677ms
hello
```
[1]: 5f72f9800b/posix/execvpe.c (L81)
Add accessors to Command.
This adds some accessor methods to `Command` to provide a way to access the values set when building the `Command`. An example where this can be useful is to display the command to be executed. This is roughly based on the [`ProcessBuilder`](13b73cdaf7/src/cargo/util/process_builder.rs (L105-L134)) in Cargo.
Possible concerns about the API:
- Values with NULs on Unix will be returned as `"<string-with-nul>"`. I don't think it is practical to avoid this, since otherwise a whole separate copy of all the values would need to be kept in `Command`.
- Does not handle `arg0` on Unix. This can be awkward to support in `get_args` and is rarely used. I figure if someone really wants it, it can be added to `CommandExt` as a separate method.
- Does not offer a way to detect `env_clear`. I'm uncertain if it would be useful for anyone.
- Does not offer a way to get an environment variable by name (`get_env`). I figure this can be added later if anyone really wants it. I think the motivation for this is weak, though. Also, the API could be a little awkward (return a `Option<Option<&OsStr>>`?).
- `get_envs` could skip "cleared" entries and just return `&OsStr` values instead of `Option<&OsStr>`. I'm on the fence here. My use case is to display a shell command, and I only intend it to be roughly equivalent to the actual execution, and I probably won't display `None` entries. I erred on the side of providing extra information, but I suspect many situations will just filter out the `None`s.
- Could implement more iterator stuff (like `DoubleEndedIterator`).
I have not implemented new std items before, so I'm uncertain if the existing issue should be reused, or if a new tracking issue is needed.
cc #44434
Fix is_absolute on WASI
WASI does not match `cfg(unix)`, but its paths are Unix-like (`/some/path`) and don't have Windows-like prefixes.
Without this change, `is_absolute` for any paths, including `/some/path`, was returning `false`on a WASI target, which is obviously not true and undesirable.
Split sys_common::Mutex in StaticMutex and MovableMutex.
The (unsafe) `Mutex` from `sys_common` had a rather complicated interface. You were supposed to call `init()` manually, unless you could guarantee it was neither moved nor used reentrantly.
Calling `destroy()` was also optional, although it was unclear if 1) resources might be leaked or not, and 2) if `destroy()` should only be called when `init()` was called.
This allowed for a number of interesting (confusing?) different ways to use this `Mutex`, all captured in a single type.
In practice, this type was only ever used in two ways:
1. As a static variable. In this case, neither `init()` nor `destroy()` are called. The variable is never moved, and it is never used reentrantly. It is only ever locked using the `LockGuard`, never with `raw_lock`.
2. As a `Box`ed variable. In this case, both `init()` and `destroy()` are called, it will be moved and possibly used reentrantly.
No other combinations are used anywhere in `std`.
This change simplifies things by splitting this `Mutex` type into two types matching the two use cases: `StaticMutex` and `MovableMutex`.
The interface of both new types is now both safer and simpler. The first one does not call nor expose `init`/`destroy`, and the second one calls those automatically in its `new()` and `Drop` functions. Also, the locking functions of `MovableMutex` are no longer unsafe.
---
This will also make it easier to conditionally box mutexes later, by moving that decision into sys/sys_common. Some of the mutex implementations (at least those of Wasm and 'sys/unsupported') are safe to move, so wouldn't need a box. ~~(But that's blocked on #76932 for now.)~~ (See #77380.)
Improve std::sys::windows::compat
Improves the compat_fn macro in sys::windows, which is used for conditionally loading APIs that might not be available.
- The module (dll) name can now be any string, not just an ident. (Not all Windows api modules are valid Rust identifiers. E.g. `WaitOnAddress` comes from `API-MS-Win-Core-Synch-l1-2-0.dll`.)
- Adds `FuncName::is_available()` for checking if a function is really available without having to do a duplicate lookup.
- Add comment explaining the lack of locking.
- Use `$_:block` to simplify the macro_rules.
- Apply `allow(unused_variables)` only to the fallback instead of everything.
---
The second point (`is_available()`) simplifies code that needs to pick an implementation depening on what is available, like `sys/windows/mutex.rs`. Before this change, it'd do its own lookup and keep its own `AtomicUsize` to track the result. Now it can just use `c::AcquireSRWLockExclusive::is_available()` directly.
This will also be useful when park/unpark/CondVar/etc. get improved implementations (e.g. from parking_lot or something else), as the best APIs for those are not available before Windows 8.
Make RawFd implement the RawFd traits
This PR makes `RawFd` implement `AsRawFd`, `IntoRawFd` and `FromRawFd`, so it can be passed to interfaces that use one of those traits as a bound.
- Module name can now be any string, not just an ident.
(Not all Windows api modules are valid Rust identifiers.)
- Adds c::FuncName::is_available() for checking if a function is really
available without having to do a duplicate lookup.
- Add comment explaining the lack of locking.
- Use `$_:block` to simplify the macro_rules.
- Apply allow(unused_variables) only to the fallback instead of
everything.
Use futex-based thread::park/unpark on Linux.
This moves the parking/unparking logic out of `thread/mod.rs` into a module named `thread_parker` in `sys_common`. The current implementation is moved to `sys_common/thread_parker/generic.rs` and the new implementation using futexes is added in `sys_common/thread_parker/futex.rs`.
The posix_spawn had been available in a form suitable for use in a
Command implementation since musl 0.9.12. Use it in a preference to a
fork when possible, to benefit from CLONE_VM|CLONE_VFORK used there.
Use `rtassert!` instead of `assert!` from the child process after fork() in std::sys::unix::process::Command::spawn()
As discussed in #73894, `assert!` panics on failure, which is not signal-safe, and `rtassert!` is a suitable replacement.
Fixes#73894.
r? @Amanieu @cuviper @joshtriplett
library: Forward compiler-builtins "mem" feature
This fixes https://github.com/rust-lang/wg-cargo-std-aware/issues/53
Now users will be able to do:
```
cargo build -Zbuild-std=core -Zbuild-std-features=compiler-builtins-mem
```
and correctly get the Rust implemenations for `memcpy` and friends.
Signed-off-by: Joe Richey <joerichey@google.com>
WASI does not match `cfg(unix)`, but its paths are Unix-like (`/some/path`) and don't have Windows-like prefixes.
Without this change, `is_absolute` for paths like `/some/path` was returning `false`on a WASI target, which is obviously not true and undesirable.
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
UI to unit test for those using Cell/RefCell/UnsafeCell
Helps with #76268.
I'm working on all files using `Cell` and moving them to unit tests when possible.
r? @matklad
