replace `Add` example with something more evocative of addition
Currently most of the operator traits use trivial implementation
examples that only perform side effects. Honestly, that might not be too
bad for the sake of documentation; but anyway, here's a proposal to move
a slightly modified version of the module-level point-addition example
into the `Add` documentation, since it's more evocative of addition
semantics.
Part of #29365
rustdoc: remove the `!` from macro URLs and titles
Because the `!` is part of a macro use, not the macro's name. E.g., you write `macro_rules! foo` not `macro_rules! foo!`, also `#[macro_import(foo)]`.
(Pulled out of #35020).
Specific error message for missplaced doc comments
Identify when documetation comments have been missplaced in the following places:
* After a struct element:
```rust
// file.rs:
struct X {
a: u8 /** document a */,
}
```
```bash
$ rustc file.rs
file.rs:2:11: 2:28 error: found documentation comment that doesn't
document anything
file.rs:2 a: u8 /** document a */,
^~~~~~~~~~~~~~~~~
file.rs:2:11: 2:28 help: doc comments must come before what they document,
maybe a comment was intended with `//`?
```
* As the last line of a struct:
```rust
// file.rs:
struct X {
a: u8,
/// incorrect documentation
}
```
```bash
$ rustc file.rs
file.rs:3:5: 3:27 error: found a documentation comment that doesn't
document anything
file.rs:3 /// incorrect documentation
^~~~~~~~~~~~~~~~~~~~~~
file.rs:3:5: 3:27 help: doc comments must come before what they document,
maybe a comment was intended with `//`?
```
* As the last line of a `fn`:
```rust
// file.rs:
fn main() {
let x = 1;
/// incorrect documentation
}
```
```bash
$ rustc file.rs
file.rs:3:5: 3:27 error: found a documentation comment that doesn't
document anything
file.rs:3 /// incorrect documentation
^~~~~~~~~~~~~~~~~~~~~~
file.rs:3:5: 3:27 help: doc comments must come before what they document,
maybe a comment was intended with `//`?
```
Fix#27429, #30322
rustdoc: Fix a couple of issues with the search results
* Fix links to static items in the search results.
* Don't include the path for primitive methods in the search results. Displaying `std::u32::max_value` is misleading so just display `u32::max_value`.
Restructure metadata encoder to track deps precisely
This issue restructures meta-data encoding to track dependencies very precisely. It uses a cute technique I hope to spread elsewhere, where we can guard the data flowing into a new dep-graph task and ensure that it is not "leaking" information from the outside, which would result in missing edges. There are no tests because we don't know of any bugs in the old system, but it's clear that there was leaked data.
The commit series is standalone, but the refactorings are kind of "windy". It's a good idea to read the comment in `src/librustc_metadata/index_builder.rs` to get a feeling for the overall strategy I was aiming at.
In several cases, I wound up adding some extra hashtable lookups, I think primarily for looking up `AdtDef` instances. We could remove these by implementing `DepGraphRead` for an `AdtDef` and then having it register a read to the adt-defs table, I guess, but I doubt it is really noticeable.
Eventually I think I'd like to extend this pattern to the dep-graph more generally, since it effectively guarantees that data cannot leak.
Fixes#35111.
r? @michaelwoerister
Move 'doesn't live long enough' errors to labels
This patch moves the "doesn't live long enough" region-style errors to instead use labels.
An example follows.
Before:
```
error: `x` does not live long enough
--> src/test/compile-fail/send-is-not-static-ensures-scoping.rs:26:18
|
26 | let y = &x;
| ^
|
note: reference must be valid for the block at 23:10...
--> src/test/compile-fail/send-is-not-static-ensures-scoping.rs:23:11
|
23 | fn main() {
| ^
note: ...but borrowed value is only valid for the block suffix following statement 0 at 25:18
--> src/test/compile-fail/send-is-not-static-ensures-scoping.rs:25:19
|
25 | let x = 1;
| ^
```
After:
```
error: `x` does not live long enough
--> src/test/compile-fail/send-is-not-static-ensures-scoping.rs:26:18
|
26 | let y = &x;
| ^ does not live long enough
...
32 | };
| - borrowed value only valid until here
...
35 | }
| - borrowed value must be valid until here
```
r? @nikomatsakis
Fix the invalidation of the MIR early exit cache
~~The #34307 introduced a cache for early exits in order to help with O(n*m) explosion of cleanup blocks but the cache is invalidated incorrectly and I can’t seem to figure out why (caching is hard!)~~
~~Remove the cache for now to fix the immediate correctness issue and worry about the performance later.~~
Cache invalidation got fixed.
Fixes#35737
r? @nikomatsakis
Update LLVM to include 4 backported commits by @majnemer.
Partial fix for rust-lang/rust#35662, should help at least loops on small arrays.
Nominated for backporting into the new beta (not the one that's being released as stable this week).
r? @alexcrichton
add mips-uclibc targets
These targets cover OpenWRT 15.05 devices, which use the soft float ABI
and the uclibc library. None of the other built-in mips targets covered
those devices (mips-gnu is hard float and glibc-based, mips-musl is
musl-based).
With this commit one can now build std for these devices using these
commands:
```
$ configure --enable-rustbuild --target=mips-unknown-linux-uclibc
$ make
```
cc #35673
---
r? @alexcrichton
cc @felixalias This is the target the rust-tessel project should be using.
Note that the libc crate doesn't support the uclibc library and will have to be updated. We are lucky that uclibc and glibc are somewhat similar and one can build std and even run the libc-test test suite with the current, unmodified libc. About that last part, I tried to run the libc-test and got a bunch of compile errors. I don't intend to fix them but I'll post some instruction about how to run libc-test in the rust-lang/libc issue tracker.
Replace macro backtraces with labeled local uses
This PR (which builds on https://github.com/rust-lang/rust/pull/35688) follows from the conversations on how best to [handle the macro backtraces](https://internals.rust-lang.org/t/improving-macro-errors/3809). The feeling there was that there were two different "groups" of users.
The first group, the macro users, rarely (and likely never) want to see the macro backtrace. This is often more confusing to users as it will be talking about code they didn't write.
The second group, the macro writers, are trying to debug a macro. They'll want to see something of the backtrace so that they can see where it's going wrong and what the steps were to get there.
For the first group, it seems clear that we don't want to show *any* macro backtrace. For the second group, we want to show enough to help the macro writer.
This PR uses a heuristic. It will only show any backtrace steps if they are in the same crate that is being compiled. This keeps errors in foreign crates from showing to users that didn't need them.
Additionally, in asking around I repeated heard that the middle steps of the backtrace are rarely, if ever, used in practice. This PR takes and applies this knowledge. Now, instead of a full backtrace, the user is given the error underline inside of a local macro as well as the use site as a secondary label. This effectively means seeing the root of the error and the top of the backtrace, eliding the middle steps.
Rather than being the "perfect solution", this PR opts to take an incremental step towards a better experience. Likely it would help to have additional macro debugging tools, as they could be much more verbose than we'd likely want to use in the error messages themselves.
Some examples follow.
**Example 1**
Before:
<img width="1275" alt="screen shot 2016-08-15 at 4 13 18 pm" src="https://cloud.githubusercontent.com/assets/547158/17682828/3948cea2-6303-11e6-93b4-b567e9d62848.png">
After:
<img width="596" alt="screen shot 2016-08-15 at 4 13 03 pm" src="https://cloud.githubusercontent.com/assets/547158/17682832/3d670d8c-6303-11e6-9bdc-f30a30bf11ac.png">
**Example 2**
Before:
<img width="918" alt="screen shot 2016-08-15 at 4 14 35 pm" src="https://cloud.githubusercontent.com/assets/547158/17682870/722225de-6303-11e6-9175-336a3f7ce308.png">
After:
<img width="483" alt="screen shot 2016-08-15 at 4 15 01 pm" src="https://cloud.githubusercontent.com/assets/547158/17682872/7582cf6c-6303-11e6-9235-f67960f6bd4c.png">
Currently most of the operator traits use trivial implementation
examples that only perform side effects. Honestly, that might not be too
bad for the sake of documentation; but anyway, here's a proposal to move
a slightly modified version of the module-level point-addition example
into the `Add` documentation, since it's more evocative of addition
semantics.
Part of #29365
wrap identifiers in backticks
minor rephrasing
fix module-level documentation to be more truthful
This branch changes the example for `Add` to no longer be a "minimum implementation that prints something to the screen".
1.11 changelog
[Rendered](9863afe029/RELEASES.md)
r? @steveklabnik
It's too late to get this into the actual release, but still needs to be backported to 1.12 beta.
The idea is that a `usize` is sort of ambiguous: in this case, it
represents indices that do not need tracking, but it could as easily be
some data read out from a tracked location, and hence represent tracked
data. Therefore, we add an `Untracked` type that lets user assert
that value is not tracked.
Also correct various typos.
