This commit uses the same trick as ~/Box to map Gc<T> to @T internally inside
the compiler. This moves a number of implementations of traits to the `gc`
module in the standard library.
This removes functions such as `Gc::new`, `Gc::borrow`, and `Gc::ptr_eq` in
favor of the more modern equivalents, `box(GC)`, `Deref`, and pointer equality.
The Gc pointer itself should be much more useful now, and subsequent commits
will move the compiler away from @T towards Gc<T>
[breaking-change]
If this breaks your code, take a deep breath, go for a walk, and
consider why you're relying on the sign extension semantics of
enum-to-float casts.
[breaking-change]
Closes#8230.
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
Previously, constants used unsigned extension, while non-constants used
signed extension. This unifies both paths to use signed extension.
If this breaks your code, take a deep breath, go for a walk, and
consider why you're relying on the sign extension semantics of
enum-to-float casts.
Closes#8230.
[breaking-change]
All rust functions are internal implementation details with respect to the ABI
exposed by crates, but extern fns are public components of the ABI and shouldn't
be stripped. This commit serializes reachable extern fns to metadata, so when
LTO is performed all of their symbols are not stripped.
Closes#14500
This commit carries out the request from issue #14678:
> The method `Iterator::len()` is surprising, as all the other uses of
> `len()` do not consume the value. `len()` would make more sense to be
> called `count()`, but that would collide with the current
> `Iterator::count(|T| -> bool) -> unit` method. That method, however, is
> a bit redundant, and can be easily replaced with
> `iter.filter(|x| x < 5).count()`.
> After this change, we could then define the `len()` method
> on `iter::ExactSize`.
Closes#14678.
[breaking-change]
Division and remainder by 0 are undefined behavior, and are detected at runtime.
This commit adds support for ensuring that MIN / -1 is also checked for at
runtime, as this would cause signed overflow, or undefined behvaior.
Closes#8460
Currently it is not possible to distinguish moves caused by captures
in the ExprUseVisitor interface. Since check_Loans needs to make that
distinction for generating good diagnostics, this is necessary for
check_loans to switch to ExprUseVisitor.
This isn't necessary right now, but check_loans needs to be able to
distinguish between initialization and writes in the ExprUseVisitor
mutate callback.
Currently mem_categorization categorizes an AutoObject adjustment the
same as the original expression. This can cause two moves to be
generated for the same underlying expression. Currently this isn't a
problem in practice, since check_loans doesn't rely on ExprUseVisitor.
Refactor a number of functions in check_loans to take node IDs and spans
rather than taking expressions directly. Also rename some variables to
make them less ambiguous.
This is the first step towards using ExprUseVisitor in check_loans, as
now some of the interfaces more closely match those used in
ExprUseVisitor.
This commit removes the <M: Any + Send> type parameter from Option::expect in
favor of just taking a hard-coded `&str` argument. This allows this function to
move into libcore.
Previous code using strings with `expect` will continue to work, but code using
this implicitly to transmit task failure will need to unwrap manually with a
`match` statement.
[breaking-change]
Closes#14008
This commit removes the <M: Any + Send> type parameter from Option::expect in
favor of just taking a hard-coded `&str` argument. This allows this function to
move into libcore.
Previous code using strings with `expect` will continue to work, but code using
this implicitly to transmit task failure will need to unwrap manually with a
`match` statement.
[breaking-change]
Closes#14008
Now that rustdoc understands proper language tags
as the code not being Rust, we can tag everything
properly.
This change tags examples in other languages by
their language. Plain notations are marked as `text`.
Console examples are marked as `console`.
Also fix markdown.rs to not highlight non-rust code.
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
By dropping the intermediate vector that holds the relevant candidates
including duplicates and directly building the vector that has the
duplicates removed we can eliminate quite a few allocations. This
reduces the times for type checking by 5-10% (measured with libstd,
libsyntax and librustc).
By dropping the intermediate vector that holds the relevant candidates
including duplicates and directly building the vector that has the
duplicates removed we can eliminate quite a few allocations. This
reduces the times for type checking by 5-10% (measured with libstd,
libsyntax and librustc).
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
Make check_for_assignment_to_restricted_or_frozen_location treat
mutation through an owning pointer the same way it treats mutation
through an &mut pointer, where mutability must be inherited from the
base path.
I also included GC pointers in this check, as that is what the
corresponding code in gather_loans/restrictions.rs does, but I don't
think there is a way to test this with the current language.
Fixes#14498.
Make check_for_assignment_to_restricted_or_frozen_location treat
mutation through an owning pointer the same way it treats mutation
through an &mut pointer, where mutability must be inherited from the
base path.
I also included GC pointers in this check, as that is what the
corresponding code in gather_loans/restrictions.rs does, but I don't
think there is a way to test this with the current language.
Fixes#14498.
So far the DWARF information for enums was different for regular enums, univariant enums, Option-like enums, etc. Regular enums were encoded as unions of structs, while the other variants were encoded as bare structs. With the changes in this PR all enums are encoded as unions so that debuggers can reconstruct if something originally was a struct, a univariant enum, or an Option-like enum. For the latter case, information about the *Null* variant is encoded into the union field name. This information can then be used by the debugger to print a `None` value actually as `None` instead of `Some(0x0)`.
The changes in this PR should also fix the regression reported in #14385 and #14411, but I want to close these only after I have confirmation from the original reporters that the issues are actually fixed for them.
So far the DWARF information for enums was different
for regular enums, univariant enums, Option-like enums,
etc. Regular enums were encoded as unions of structs,
while the other variants were encoded as bare structs.
With the changes in this PR all enums are encoded as
unions so that debuggers can reconstruct if something
originally was a struct, a univariant enum, or an
Option-like enum. For the latter case, information
about the Null variant is encoded into the union field
name. This information can then be used by the
debugger to print a None value actually as None
instead of Some(0x0).
Change `for` desugaring & make refutable pattern errors more precise
This changes for to desugar to the `let`-based pattern match as described in #14390, and adjusts the compiler to use this information for error messages that even mention that it's in a `for` loop.
Also, it makes the compiler record the exact positions of refutable parts of a pattern, to point to exactly them in error messages.
This ensures that a public typedef to a private item is ensured to be public in
terms of linkage. This affects both the visibility of the library's symbols as
well as other lints based on privacy (dead_code for example).
Closes#14421Closes#14422
This ensures that a public typedef to a private item is ensured to be public in
terms of linkage. This affects both the visibility of the library's symbols as
well as other lints based on privacy (dead_code for example).
Closes#14421Closes#14422
messages when the pattern is refutable.
This means the compiler points directly to the pattern and said that the
problem is the pattern being refutable (rather than just saying that
some value isn't covered in the `match` as it did previously).
Fixes#14390.
There's a fair number of attributes that have to be whitelisted since
they're either looked for by rustdoc, in trans, or as needed. These can
be cleaned up in the future.
We can now mark arguments and returns as `nonnull` in LLVM. It's still somewhat limited by the fact that LLVM loses this information after inlining but it might help in certain cases.
All of these features have been obsolete since February 2014, where most have
been obsolete since 2013. There shouldn't be any more need to keep around the
parser hacks after this length of time.
It can be easy to accidentally bloat the size of an enum by making one variant
larger than the others. When this happens, it usually goes unnoticed. This
commit adds a lint that can warn when the largest variant in an enum is more
than 3 times larger than the second-largest variant. This requires a little
bit of rejiggering, because size information is only available in trans, but
lint levels are only available in the lint context.
It is allow by default because it's pretty noisy, and isn't really *that*
undesirable.
Closes#10362
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
The #[phase(syntax,link)] attribute on `extern crate std` needs to be an
outer attribute so it can pretty-print properly.
Also add `#![no_std]` and `#[feature(phase)]` so compiling the
pretty-printed source will work.
The #[phase(syntax,link)] attribute on `extern crate std` needs to be an
outer attribute so it can pretty-print properly.
Also add `#![no_std]` and `#[feature(phase)]` so compiling the
pretty-printed source will work.
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
Consider PatEnums constructed with A(..) to be candidates for tuple
struct patterns, not just ones constructed with A(a,b,c). If these
patterns shouldn't be valid tuple struct patterns (as they're equivalent
to _), this needs to be caught before we get to trans.
Fixes#14308.
Tweak region inference to ignore constraints like `'a <= 'static`, since they
have no value. This also ensures that we can handle some obscure cases of fn
subtyping with bound regions that we didn't used to handle correctly.
Fixes#13974.
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
This slightly adjusts the NullablePointer representation for some enums in the case where the non-nullable variant has a single field (the ptr field) to be just that, the pointer. This is in contrast to the current behaviour where we'd wrap that single pointer in a LLVM struct.
Fixes#11040 & #11303.
This plugs a leak where resolve was treating enums defined in parent modules as
in-scope for all children modules when resolving a pattern identifier. This
eliminates the code path in resolve entirely.
If this breaks any existing code, then it indicates that the variants need to be
explicitly imported into the module.
Closes#14221
This plugs a leak where resolve was treating enums defined in parent modules as
in-scope for all children modules when resolving a pattern identifier. This
eliminates the code path in resolve entirely.
If this breaks any existing code, then it indicates that the variants need to be
explicitly imported into the module.
Closes#14221
[breaking-change]
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
Passing `--pretty flowgraph=<NODEID>` makes rustc print a control flow graph.
In pratice, you will also need to pass the additional option:
`-o <FILE>` to emit output to a `.dot` file for graphviz.
(You can only print the flow-graph for a particular block in the AST.)
----
An interesting implementation detail is the way the code puts both the
node index (`cfg::CFGIndex`) and a reference to the payload
(`cfg::CFGNode`) into the single `Node` type that is used for
labelling and walking the graph. I had once mistakenly thought that I
only wanted the `cfg::CFGNode`, but for labelling, you really want the
cfg index too, rather than e.g. trying to use the `ast::NodeId` as the
label (which breaks down e.g. due to `ast::DUMMY_NODE_ID`).
----
As a drive-by fix, I had to fix `rustc::middle::cfg::construct`
interface to reflect changes that have happened on the master branch
while I was getting this integrated into the compiler. (The next
commit actually adds tests of the `--pretty flowgraph` functionality,
so that should ensure that the `rustc::middle::cfg` code does not go
stale again.)
1. Only insert non-dummy nodes into the exit map.
2. Revise handling of `break` and `continue` forms so that they are
not treated as if control falls through to the next node (since it
does not, it just jumps to the end or start of the loop body).
3. Fixed support for return expression in flow graph construction.
Refine lifetimes in signature for graph node/edge iteration methods.
Added `pub` `node_id` and `edge_id` methods that correspond to
NodeIndex and EdgeIndex `get` methods (note that the inner index is
already `pub` in the struct definitions). (I decided that `get()`,
used internally, just looks too generic and that client code is
clearer with more explicit method names.)
Add `EntryPat` and `NodePat` variants to ast_map, so that lookups for
id 1 in `let S{val: _x /* pat 2 */} /* pat 1 */ = ...` will actually
resolve to the pattern `S{ ... }`, rather than "unknown node", in a
function like `node_id_to_str`.
The core library in theory has 0 dependencies, but in practice it has some in
order for it to be efficient. These dependencies are in the form of the basic
memory operations provided by libc traditionally, such as memset, memcmp, etc.
These functions are trivial to implement and themselves have 0 dependencies.
This commit adds a new crate, librlibc, which will serve the purpose of
providing these dependencies. The crate is never linked to by default, but is
available to be linked to by downstream consumers. Normally these functions are
provided by the system libc, but in other freestanding contexts a libc may not
be available. In these cases, librlibc will suffice for enabling execution with
libcore.
cc #10116
Provides better help for the resolve failures inside an `impl` if the name matches:
- a field on the self type
- a method on the self type
- a method on the current trait ref (in a trait impl)
Not handling trait method suggestions if in a regular `impl` (as you can see on line 69 of the test), I believe it is possible though.
Also, provides a better message when `self` fails to resolve due to being a static method.
It's using some unsafe pointers to skip copying the larger structures (which are only used in error conditions); it's likely possible to get it working with lifetimes (all the useful refs should outlive the visitor calls) but I haven't really figured that out for this case. (can switch to copying code if wanted)
Closes#2356.
LLVM internally uses `uint64_t` for array size, but the corresponding
C API (`LLVMArrayType`) uses `unsigned int` so ths value is truncated.
Therefore rustc generates wrong type for fixed-sized large vector e.g.
`[0 x i8]` for `[0u8, ..(1 << 32)]`.
This patch adds `LLVMRustArrayType` function for `uint64_t` support.
* Added `// no-pretty-expanded` to pretty-print a test, but not run it through
the `expanded` variant.
* Removed #[deriving] and other expanded attributes after they are expanded
* Removed hacks around &str and &&str and friends (from both the parser and the
pretty printer).
* Un-ignored a bunch of tests
The compiler was updated to recognize that implementations for ty_uniq(..) are
allowed if the Box lang item is located in the current crate. This enforces the
idea that libcore cannot allocated, and moves all related trait implementations
from libcore to libstd.
This is a breaking change in that the AnyOwnExt trait has moved from the any
module to the owned module. Any previous users of std::any::AnyOwnExt should now
use std::owned::AnyOwnExt instead. This was done because the trait is intended
for Box traits and only Box traits.
[breaking-change]
The goal of this refactoring is to make the rustc driver code easier to understand and use. Since this is as close to an API as we have, I think it is important that it is nice. On getting stuck in, I found that there wasn't as much to change as I'd hoped to make the stage... functions easier to use by tools (which is a good thing :-) ).
This patch only moves code around - mostly just moving code to different files, but a few extracted method refactorings too. To summarise the changes: I added driver::config which handles everything about configuring the compiler. driver::session now just defines and builds session objects. I moved driver code from librustc/lib.rs to librustc/driver/mod.rs so all the code is one place. I extracted methods to make emulating the compiler without being the compiler a little easier. Within the driver directory, I moved code around to more logically fit in the modules.
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
The goal of this refactoring is to make the rustc driver code easier to understand and use. Since this is as close to an API as we have, I think it is important that it is nice. On getting stuck in, I found that there wasn't as much to change as I'd hoped to make the stage... fns easier to use by tools.
This patch only moves code around - mostly just moving code to different files, but a few extracted method refactorings too. To summarise the changes: I added driver::config which handles everything about configuring the compiler. driver::session now just defines and builds session objects. I moved driver code from librustc/lib.rs to librustc/driver/mod.rs so all the code is one place. I extracted methods to make emulating the compiler without being the compiler a little easier. Within the driver directory, I moved code around to more logically fit in the modules.
ty::substs struct. This is a holdover from the olden days of yore. This patch
removes the last vestiges of that practice. This is part of the work
I was doing on #5527.
With `~[T]` no longer growable, the `FromIterator` impl for `~[T]` doesn't make
much sense. Not only that, but nearly everywhere it is used is to convert from
a `Vec<T>` into a `~[T]`, for the sake of maintaining existing APIs. This turns
out to be a performance loss, as it means every API that returns `~[T]`, even a
supposedly non-copying one, is in fact doing extra allocations and memcpy's.
Even `&[T].to_owned()` is going through `Vec<T>` first.
Remove the `FromIterator` impl for `~[T]`, and adjust all the APIs that relied
on it to start using `Vec<T>` instead. This includes rewriting
`&[T].to_owned()` to be more efficient, among other performance wins.
Also add a new mechanism to go from `Vec<T>` -> `~[T]`, just in case anyone
truly needs that, using the new trait `FromVec`.
[breaking-change]
The code in resolve erroneously assumed that private enums weren't visited, so
the logic was adjusted to check to see if the enum definition itself was public.
Closes#11680
have no value. This also ensures that we can handle some obscure cases of fn
subtyping with bound regions that we didn't used to handle correctly.
Fixes#13974.
As part of #5527 I had to make some changes here and I just couldn't take it anymore. Refactor the writeback code. Should be functionally equivalent to the old stuff.
r? @pcwalton
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.set()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* The `pop` and `set` methods have been combined into one method, `replace`
* The `get_mut` method has been removed. All interior mutability should be done
through `RefCell`.
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.replace()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
Previously, the parser would not allow you to simultaneously implement a
function with a different abi as well as being unsafe at the same time. This
extends the parser to allow functions of the form:
unsafe extern fn foo() {
// ...
}
The closure type grammar was also changed to reflect this reversal, types
previously written as "extern unsafe fn()" must now be written as
"unsafe extern fn()". The parser currently has a hack which allows the old
style, but this will go away once a snapshot has landed.
Closes#10025
[breaking-change]
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
Previously, the parser would not allow you to simultaneously implement a
function with a different abi as well as being unsafe at the same time. This
extends the parser to allow functions of the form:
unsafe extern fn foo() {
// ...
}
The closure type grammar was also changed to reflect this reversal, types
previously written as "extern unsafe fn()" must now be written as
"unsafe extern fn()". The parser currently has a hack which allows the old
style, but this will go away once a snapshot has landed.
Closes#10025
[breaking-change]
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
The code in resolve erroneously assumed that private enums weren't visited, so
the logic was adjusted to check to see if the enum definition itself was public.
Closes#11680
By carefully distinguishing falling back to the default arm from moving
on to the next pattern, this patch adjusts the codegen logic for range
and guarded arms of pattern matching expression. It is a more
appropriate way of fixing #12582 and #13027 without causing regressions
such as #13867.
Closes#13867
This patch fixes issue #13186.
When generating constant expression for enum, it is possible that
alignment of expression may be not equal to alignment of type. In that
case space after last struct field must be padded to match size of value
and size of struct. This commit adds that padding.
See detailed explanation in src/test/run-pass/trans-tag-static-padding.rs
This was removed because these could alias with `&const T` or `@mut T`
and those are now gone from the language. There are still aliasing
issues within local scopes, but this is correct for function parameters.
This also removes the no-op `noalias` marker on proc (not a pointer) and
leaves out the mention of #6750 because real type-based alias analysis
is not within the scope of best effort usage of the `noalias` attribute.
Test case:
pub fn foo(x: &mut &mut u32) {
**x = 5;
**x = 5;
}
Before:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
%2 = load i32** %0, align 8
store i32 5, i32* %2, align 4
ret void
}
After:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** noalias nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
ret void
}
Closes#12436
By carefully distinguishing falling back to the default arm from moving
on to the next pattern, this patch adjusts the codegen logic for range
and guarded arms of pattern matching expression. It is a more
appropriate way of fixing #12582 and #13027 without causing regressions
such as #13867.
Closes#13867
Some cases were not correctly handled by this lint, for instance `let a = 42u8; a < 0` and `let a = 42u8; a > 255`.
It led to the discovery of two useless comparisons, which I removed.
This has long since not been too relevant since the introduction of many crate
type outputs. This commit removes the flag entirely, adjusting all logic to do
the most reasonable thing when building both a library and an executable.
Closes#13337
This was removed because these could alias with `&const T` or `@mut T`
and those are now gone from the language. There are still aliasing
issues within local scopes, but this is correct for function parameters.
This also removes the no-op `noalias` marker on proc (not a pointer) and
leaves out the mention of #6750 because real type-based alias analysis
is not within the scope of best effort usage of the `noalias` attribute.
Test case:
pub fn foo(x: &mut &mut u32) {
**x = 5;
**x = 5;
}
Before:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
%2 = load i32** %0, align 8
store i32 5, i32* %2, align 4
ret void
}
After:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** noalias nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
ret void
}
Closes#12436
This ensures that private functions exported through static initializers will
actually end up being public in the object file (so other objects can continue
to reference the function).
Closes#13620
Closes#7575.
I don't think the change from a contains lookup to an iteration of the HashSet in the resolver should be much of a burden as the set of methods with the same name should be relatively small.
This is a first patch towards an opt-in built-in trait world. This patch removes the restriction on built-in traits and allows such traits to be derived.
[RFC#3]
cc #13231
@nikomatsakis r?
This ensures that private functions exported through static initializers will
actually end up being public in the object file (so other objects can continue
to reference the function).
Closes#13620
This has long since not been too relevant since the introduction of many crate
type outputs. This commit removes the flag entirely, adjusting all logic to do
the most reasonable thing when building both a library and an executable.
Closes#13337
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
Pre-step towards issue #12624 and others: Introduce ExprUseVisitor, remove the
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
r? @alexcrichton
In the process, `Splits` got changed to be more like `CharSplits` in `str` to present the DEI interface.
Note that `treemap` still has a `rev_iter` function because it seems like it would be a significant interface change to expose a DEI - the iterator would have to gain an extra pointer, the completion checks would be more complicated, and it isn't easy to check that such an implementation is correct due to the use of unsafety to subvert the aliasing properties of `&mut`.
This fixes#9391.
This commit deprecates rev_iter, mut_rev_iter, move_rev_iter everywhere (except treemap) and also
deprecates related functions like rsplit, rev_components, and rev_str_components. In every case,
these functions can be replaced with the non-reversed form followed by a call to .rev(). To make this
more concrete, a translation table for all functional changes necessary follows:
* container.rev_iter() -> container.iter().rev()
* container.mut_rev_iter() -> container.mut_iter().rev()
* container.move_rev_iter() -> container.move_iter().rev()
* sliceorstr.rsplit(sep) -> sliceorstr.split(sep).rev()
* path.rev_components() -> path.components().rev()
* path.rev_str_components() -> path.str_components().rev()
In terms of the type system, this change also deprecates any specialized reversed iterator types (except
in treemap), opting instead to use Rev directly if any type annotations are needed. However, since
methods directly returning reversed iterators are now discouraged, the need for such annotations should
be small. However, in those cases, the general pattern for conversion is to take whatever follows Rev in
the original reversed name and surround it with Rev<>:
* RevComponents<'a> -> Rev<Components<'a>>
* RevStrComponents<'a> -> Rev<StrComponents<'a>>
* RevItems<'a, T> -> Rev<Items<'a, T>>
* etc.
The reasoning behind this change is that it makes the standard API much simpler without reducing readability,
performance, or power. The presence of functions such as rev_iter adds more boilerplate code to libraries
(all of which simply call .iter().rev()), clutters up the documentation, and only helps code by saving two
characters. Additionally, the numerous type synonyms that were used to make the type signatures look nice
like RevItems add even more boilerplate and clutter up the docs even more. With this change, all that cruft
goes away.
[breaking-change]
Similar to my recent changes to ~[T]/&[T], these changes remove the vstore abstraction and represent str types as ~(str) and &(str). The Option<uint> in ty_str is the length of the string, None if the string is dynamically sized.
It reflected the obsolete syntax `use a, b, c;` and did not make past the parser (though it was a non-fatal error so we can continue). This legacy affected many portions of rustc and rustdoc as well, so this PR cleans them up altogether.
As a side effect of cleanup, we now have `SCHEMA_VERSION` in `rustdoc::clean` (instead of the crate root), so it has a better chance to be updated when `rustdoc::clean` gets updated.
it reflected the obsolete syntax `use a, b, c;` and did not make
past the parser (though it was a non-fatal error so we can continue).
this legacy affected many portions of rustc and rustdoc as well,
so this commit cleans them up altogether.
This addresses the ICE from #13763, but it does not allow the test to compile,
due to #13768. An alternate test was checked in in the meantime.
Closes#13763
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
Specifically, the method parameter cardinality mismatch or missing
method error message span now gets method itself exactly. It was the
whole expression.
Closes#9390Closes#13684Closes#13709
This patch removes the special auto-rooting for `@` from the borrow checker. With `@` moving into a library, it doesn't make sense to keep this code around anymore. It also simplifies `trans` by removing root checking from there
@nikomatsakis
Closes: #11586
Specifically, the method parameter cardinality mismatch or missing
method error message span now gets method itself exactly. It was the
whole expression.
Closes#9390Closes#13684Closes#13709
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes#12224
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes#12224
[breaking-change]
`@` pointers used to have special rooting and regions management. With `@`
moving to standalone library, we don't need to keep that special
treatment around. This patch modifies the way `@` pointers are treated by
treating them as if they were `~` pointers
Region checker and borrow checker were modified in this patch.
Closes#11586
[breaking-change]
This exposes volatile versions of the memset/memmove/memcpy intrinsics.
The volatile parameter must be constant, so this can't simply be a
parameter to our intrinsics.
Now with proper checking of enums and allows unsized fields as the last field in a struct or variant. This PR only checks passing of unsized types and distinguishing them from sized ones. To be safe we also need to control storage.
Closes issues #12969 and #13121, supersedes #13375 (all the discussion there is valid here too).
This currently requires linking against a library like libquadmath (or
libgcc), because compiler-rt barely has any support for this and most
hardware does not yet have 128-bit precision floating point. For this
reason, it's currently hidden behind a feature gate.
When compiler-rt is updated to trunk, some tests can be added for
constant evaluation since there will be support for the comparison
operators.
Closes#13381
This exposes volatile versions of the memset/memmove/memcpy intrinsics.
The volatile parameter must be constant, so this can't simply be a
parameter to our intrinsics.
This patch adds a special rule for `Unsafe<T>` and makes it `Share`
regardless of whether T is `Share`.
[breaking-change]
Closes#13125
cc @nikomatsakis
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
This gives a better NOTE error message when a privacy error is encountered with
a static method. Previously no note was emitted (due to lack of support), but
now a note is emitted indicating that the struct/enum itself is private.
Closes#13641
Refactors all uses of ty_vec and associated things to remove the vstore abstraction (still used for strings, for now). Pointers to vectors are stored as ty_rptr or ty_uniq wrapped around a ty_vec. There are no user-facing changes. Existing behaviour is preserved by special-casing many instances of pointers containing vectors. Hopefully with DST most of these hacks will go away. For now it is useful to leave them hanging around rather than abstracting them into a method or something.
Closes#13554.
This gives a better NOTE error message when a privacy error is encountered with
a static method. Previously no note was emitted (due to lack of support), but
now a note is emitted indicating that the struct/enum itself is private.
Closes#13641
This commit removes the compiler support for floating point modulus operations,
as well as from the language. An implementation for this operator is now
required to be provided by libraries.
Floating point modulus is rarely used, doesn't exist in C, and is always lowered
to an fmod library call by LLVM, and LLVM is considering removing support
entirely.
Closes#12278
Refactores all uses of ty_vec and associated things to remove the vstore abstraction (still used for strings, for now). Pointers to vectors are stored as ty_rptr or ty_uniq wrapped around a ty_vec. There are no user-facing changes. Existing behaviour is preserved by special-casing many instances of pointers containing vectors. Hopefully with DST most of these hacks will go away. For now it is useful to leave them hanging around rather than abstracting them into a method or something.
Closes#13554.
In upgrading LLVM, only rust functions had the "split-stack" attribute added.
This commit changes the addition of LLVM's "split-stack" attribute to *always*
occur and then we remove it sometimes if the "no_split_stack" rust attribute is
present.
Closes#13625
This is a bit of an interesting upgrade to LLVM. Upstream LLVM has started using C++11 features, so they require a C++11 compiler to build. I've updated all the bots to have a C++11 compiler, and they appear to be building LLVM successfully:
* Linux bots - I added gcc/g++ 4.7 (good enough)
* Android bots - same as the linux ones
* Mac bots - I installed the most recent command line tools for Lion which gives us clang 3.2, but LLVM wouldn't build unless it was explicitly asked to link to `libc++` instead of `libstdc++`. This involved tweaking `mklldeps.py` and the `configure` script to get things to work out
* Windows bots - mingw-w64 has gcc 4.8.1 which is sufficient for building LLVM (hurray!)
* BSD bots - I updated FreeBSD to 10.0 which brought with it a relevant version of clang.
The largest fallout I've seen so far is that the test suite doesn't work at all on FreeBSD 10. We've already stopped gating on FreeBSD due to #13427 (we used to be on freebsd 9), so I don't think this puts us in too bad of a situation. I will continue to attempt to fix FreeBSD and the breakage on there.
The LLVM update brings with it all of the recently upstreamed LLVM patches. We only have one local patch now which is just an optimization, and isn't required to use upstream LLVM. I want to maintain compatibility with LLVM 3.3 and 3.4 while we can, and this upgrade is keeping us up to date with the 3.5 release. Once 3.5 is release we will in theory no longer require a bundled LLVM.
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
This version of `is_to_be_inferred` double-checks the result from
`inferred_map` by querying the `named_region_map` and `ast_map` and
then asserts that the `inferred_map` state is consistent with its own
findings. (See issue 13261 for further discussion of the approaches).
This comes with a number of fixes to be compatible with upstream LLVM:
* Previously all monomorphizations of "mem::size_of()" would receive the same
symbol. In the past LLVM would silently rename duplicated symbols, but it
appears to now be dropping the duplicate symbols and functions now. The symbol
names of monomorphized functions are now no longer solely based on the type of
the function, but rather the type and the unique hash for the
monomorphization.
* Split stacks are no longer a global feature controlled by a flag in LLVM.
Instead, they are opt-in on a per-function basis through a function attribute.
The rust #[no_split_stack] attribute will disable this, otherwise all
functions have #[split_stack] attached to them.
* The compare and swap instruction now takes two atomic orderings, one for the
successful case and one for the failure case. LLVM internally has an
implementation of calculating the appropriate failure ordering given a
particular success ordering (previously only a success ordering was
specified), and I copied that into the intrinsic translation so the failure
ordering isn't supplied on a source level for now.
* Minor tweaks to LLVM's API in terms of debuginfo, naming, c++11 conventions,
etc.
Part of this required added an override of `fold_type_method` in the
Folder for Ctx impl; it follows the same pattern as `fold_method`.
Also, as a drive-by fix, I moved all of the calls to `folder.new_id`
in syntax::fold's no-op default traversal to really be the first
statement in each function.
* This is to uphold the invariant that `folder.new_id` is always
called first (an unfortunate requirement of the current `ast_map`
code), an invariant that we seemingly were breaking in e.g. the
previous `noop_fold_block`.
* Now it should be easier to see when adding new code that this
invariant must be upheld.
* (note that the breakage in `noop_fold_block` may not have mattered
so much previously, since the only thing that blocks can bind are
lifetimes, which I am only adding support for now.)
Before adding a variance constrant for a given early-bound param,
check if it was meant to be inferred.
To support the above, added `fn is_to_be_inferred` to
`variance::ConstraintContext`.
When instantiating trait default methods for certain implementation,
`typeck` correctly combined type parameters from trait bound with those
from method bound, but didn't do so for lifetime parameters. Applies
the same logic to lifetime parameters.
Closes#13204
This commit changes the way move errors are reported when some value is
captured by a PatIdent. First, we collect all of the "cannot move out
of" errors before reporting them, and those errors with the same "move
source" are reported together. If the move is caused by a PatIdent (that
binds by value), we add a note indicating where it is and suggest the
user to put `ref` if they don't want the value to move. This makes the
"cannot move out of" error in match expression nicer (though the extra
note may not feel that helpful in other places :P). For example, with
the following code snippet,
```rust
enum Foo {
Foo1(~u32, ~u32),
Foo2(~u32),
Foo3,
}
fn main() {
let f = &Foo1(~1u32, ~2u32);
match *f {
Foo1(num1, num2) => (),
Foo2(num) => (),
Foo3 => ()
}
}
```
Errors before the change:
```rust
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:11:9: 11:18 error: cannot move out of dereference of `&`-pointer
test.rs:11 Foo2(num) => (),
^~~~~~~~~
```
After:
```rust
test.rs:9:11: 9:13 error: cannot move out of dereference of `&`-pointer
test.rs:9 match *f {
^~
test.rs:10:14: 10:18 note: attempting to move value to here (to prevent the move, use `ref num1` or `ref mut num1` to capture value by reference)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:10:20: 10:24 note: and here (use `ref num2` or `ref mut num2`)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:11:14: 11:17 note: and here (use `ref num` or `ref mut num`)
test.rs:11 Foo2(num) => (),
^~~
```
Close#8064
When instantiating trait default methods for certain implementation,
`typeck` correctly combined type parameters from trait bound with those
from method bound, but didn't do so for lifetime parameters. Applies
the same logic to lifetime parameters.
Closes#13204
This removes the `priv` keyword from the language and removes private enum
variants as a result. The remaining use cases of private enum variants were all
updated to be a struct with one private field that is a private enum.
RFC: 0006-remove-priv
Closes#13535
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
Exposing ctpop, ctlz, cttz and bswap as taking signed i8/i16/... is just
exposing the internal LLVM names pointlessly (LLVM doesn't have "signed
integers" or "unsigned integers", it just has sized integer types
with (un)signed *operations*).
These operations are semantically working with raw bytes, which the
unsigned types model better.
Fixes#13507.
I haven't familiarized myself with this part of the rust compiler, so hopefully there are no mistakes (despite the simplicity of the commit). It is also 5am.
This includes a change to the way lifetime names are generated. Say we
figure that `[#0, 'a, 'b]` have to be the same lifetimes, then instead
of just generating a new lifetime `'c` like before to replace them, we
would reuse `'a`. This is done so that when the lifetime name comes
from an impl, we don't give something that's completely off, and we
don't have to do much work to figure out where the name came from. For
example, for the following code snippet:
```rust
struct Baz<'x> {
bar: &'x int
}
impl<'x> Baz<'x> {
fn baz1(&self) -> &int {
self.bar
}
}
```
`[#1, 'x]` (where `#1` is BrAnon(1) and refers to lifetime of `&int`)
have to be marked the same lifetime. With the old method, we would
generate a new lifetime `'a` and suggest `fn baz1(&self) -> &'a int`
or `fn baz1<'a>(&self) -> &'a int`, both of which are wrong.
A mismatched type with more type parameters than the expected one causes
`typeck` looking up out of the bound of type parameter vector, which
leads to ICE.
Closes#13466
The current error message is misleading, it asks users to add `#[feature(..)]` which ends up being treated as an outer attribute, which then has no error unless `attribute_usage` lint is enforced. The code will still fail and the user might not understand why.
This patch fixes issue #13186.
When generating constant expression for enum, it is possible that
alignment of expression may be not equal to alignment of type. In that
case space after last struct field must be padded to match size of value
and size of struct. This commit adds that padding.
See detailed explanation in src/test/run-pass/trans-tag-static-padding.rs
A mismatched type with more type parameters than the expected one causes
`typeck` looking up out of the bound of type parameter vector, which
leads to ICE.
Closes#13466
Cleans up some remnants of the old mutability system and only allows vector/trait mutability in `VstoreSlice` (`&mut [T]`) and `RegionTraitStore` (`&mut Trait`).
libstd: Implement `StrBuf`, a new string buffer type like `Vec`, and port all code over to use it.
Rebased & tests-fixed version of https://github.com/mozilla/rust/pull/13269
Previously, a private use statement would shadow a public use statement, all of
a sudden publicly exporting the privately used item. The correct behavior here
is to only shadow the use for the module in question, but for now it just
reverts the entire name to private so the pub use doesn't have much effect.
The behavior isn't exactly what we want, but this no longer has backwards
compatibility hazards.
Previously resolve was checking the "import resolution" for whether an import
had succeeded or not, but this was the same structure filled in by a previous
import if a name is shadowed. Instead, this alters resolve to consult the local
resolve state (as opposed to the shared one) to test whether an import succeeded
or not.
Closes#13404
Resolve is currently erroneously allowing imports through private `use`
statements in some circumstances, even across module boundaries. For example,
this code compiles successfully today:
use std::c_str;
mod test {
use c_str::CString;
}
This should not be allowed because it was explicitly decided that private `use`
statements are purely bringing local names into scope, they are not
participating further in name resolution.
As a consequence of this patch, this code, while valid today, is now invalid:
mod test {
use std::c_str;
unsafe fn foo() {
::test::c_str::CString::new(0 as *u8, false);
}
}
While plausibly acceptable, I found it to be more consistent if private imports
were only considered candidates to resolve the first component in a path, and no
others.
Closes#12612
This commit makes sure that code inlined from other functions isn't assigned the source position of the call site, since this leads to undesired behavior when setting line breakpoints (issue #12886)
This commit changes the way move errors are reported when some value is
captured by a PatIdent. First, we collect all of the "cannot move out
of" errors before reporting them, and those errors with the same "move
source" are reported together. If the move is caused by a PatIdent (that
binds by value), we add a note indicating where it is and suggest the
user to put `ref` if they don't want the value to move. This makes the
"cannot move out of" error in match expression nicer (though the extra
note may not feel that helpful in other places :P). For example, with
the following code snippet,
```rust
enum Foo {
Foo1(~u32, ~u32),
Foo2(~u32),
Foo3,
}
fn main() {
let f = &Foo1(~1u32, ~2u32);
match *f {
Foo1(num1, num2) => (),
Foo2(num) => (),
Foo3 => ()
}
}
```
Errors before the change:
```rust
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:10:9: 10:25 error: cannot move out of dereference of `&`-pointer
test.rs:10 Foo1(num1, num2) => (),
^~~~~~~~~~~~~~~~
test.rs:11:9: 11:18 error: cannot move out of dereference of `&`-pointer
test.rs:11 Foo2(num) => (),
^~~~~~~~~
```
After:
```rust
test.rs:9:11: 9:13 error: cannot move out of dereference of `&`-pointer
test.rs:9 match *f {
^~
test.rs:10:14: 10:18 note: attempting to move value to here (to prevent the move, you can use `ref num1` to capture value by reference)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:10:20: 10:24 note: and here (use `ref num2`)
test.rs:10 Foo1(num1, num2) => (),
^~~~
test.rs:11:14: 11:17 note: and here (use `ref num`)
test.rs:11 Foo2(num) => (),
^~~
```
Close#8064
This fixes the categorization of the upvars of procs (represented internally
as once fns) to consider usage to require a loan. In doing so, upvars are no
longer allowed to be moved out of repeatedly in loops and such.
Closes#10398Closes#12041Closes#12127
This commit removes the compiler support for floating point modulus operations,
as well as from the language. An implementation for this operator is now
required to be provided by libraries.
Floating point modulus is rarely used, doesn't exist in C, and is always lowered
to an fmod library call by LLVM, and LLVM is considering removing support
entirely.
Closes#12278
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
`Reader`, `Writer`, `MemReader`, `MemWriter`, and `MultiWriter` now work with `Vec<u8>` instead of `~[u8]`. This does introduce some extra copies since `from_utf8_owned` isn't usable anymore, but I think that can't be helped until `~str`'s representation changes.
In the error message for when a private field is used, include the name of the struct, or if it's a struct-like enum variant, the names of the variant and the enum.
This fixes#13341.
This can be a frustrating error message, ideally we should print the signature mismatch, but hinting that it's a trait incompatibility helps tracking root cause. Also beefed up the testcases for this.
Ideally we would print the signature mismatch in the error helper?
rustc: move the check_loop pass earlier.
This pass is purely AST based, and by running it earlier we emit more
useful error messages, e.g. type inference fails in the case of
`let r = break;` with few constraints on `r`, but it's more useful to be told that
the `break` is outside the loop (rather than a type error) when it is.
Closes#13292.
This pass is purely AST based, and by running it earlier we emit more
useful error messages, e.g. type inference fails in the case of `let r =
break;` with few constraints on `r`, but its more useful to be told that
the `break` is outside a loop (rather than a type error) when it is.
Closes#13292.
`RefCell::get` can be a bit surprising, because it actually clones the wrapped value. This removes `RefCell::get` and replaces all the users with `RefCell::borrow()` when it can, and `RefCell::borrow().clone()` when it can't. It removes `RefCell::set` for consistency. This closes#13182.
It also fixes an infinite loop in a test when debugging is on.
This was missed when dropping the null-termination from our string
types. An explicit null byte can still be placed anywhere in a string if
desired, but there's no reason to stick one at the end of every string
constant.
It's surprising that `RefCell::get()` is implicitly doing a clone
on a value. This patch removes it and replaces all users with
either `.borrow()` when we can autoderef, or `.borrow().clone()`
when we cannot.
