The allocas used in match expression currently don't get good lifetime
markers, in fact they only get lifetime start markers, because their
lifetimes don't match to cleanup scopes.
While the bindings themselves are bog standard and just need a matching
pair of start and end markers, they might need them twice, once for a
guard clause and once for the match body.
The __llmatch alloca OTOH needs a single lifetime start marker, but
when there's a guard clause, it needs two end markers, because its
lifetime ends either when the guard doesn't match or after the match
body.
With these intrinsics in place, LLVM can now, for example, optimize
code like this:
````rust
enum E {
A1(int),
A2(int),
A3(int),
A4(int),
}
pub fn variants(x: E) {
match x {
A1(m) => bar(&m),
A2(m) => bar(&m),
A3(m) => bar(&m),
A4(m) => bar(&m),
}
}
````
To a single call to bar, using only a single stack slot. It still fails
to eliminate some of checks.
````gas
.Ltmp5:
.cfi_def_cfa_offset 16
movb (%rdi), %al
testb %al, %al
je .LBB3_5
movzbl %al, %eax
cmpl $1, %eax
je .LBB3_5
cmpl $2, %eax
.LBB3_5:
movq 8(%rdi), %rax
movq %rax, (%rsp)
leaq (%rsp), %rdi
callq _ZN3bar20hcb7a0d8be8e17e37daaE@PLT
popq %rax
retq
````
Lifetime intrinsics help to reduce stack usage, because LLVM can apply
stack coloring to reuse the stack slots of dead allocas for new ones.
For example these functions now both use the same amount of stack, while
previous `bar()` used five times as much as `foo()`:
````rust
fn foo() {
println("{}", 5);
}
fn bar() {
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
}
````
On top of that, LLVM can also optimize out certain operations when it
knows that memory is dead after a certain point. For example, it can
sometimes remove the zeroing used to cancel the drop glue. This is
possible when the glue drop itself was already removed because the
zeroing dominated the drop glue call. For example in:
````rust
pub fn bar(x: (Box<int>, int)) -> (Box<int>, int) {
x
}
````
With optimizations, this currently results in:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.memset.p0i8.i64(i8* %2, i8 0, i64 16, i32 8, i1 false)
ret void
}
````
But with lifetime intrinsics we get:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.lifetime.end(i64 16, i8* %2)
ret void
}
````
Fixes#15665
Lifetime intrinsics help to reduce stack usage, because LLVM can apply
stack coloring to reuse the stack slots of dead allocas for new ones.
For example these functions now both use the same amount of stack, while
previous `bar()` used five times as much as `foo()`:
````rust
fn foo() {
println("{}", 5);
}
fn bar() {
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
}
````
On top of that, LLVM can also optimize out certain operations when it
knows that memory is dead after a certain point. For example, it can
sometimes remove the zeroing used to cancel the drop glue. This is
possible when the glue drop itself was already removed because the
zeroing dominated the drop glue call. For example in:
````rust
pub fn bar(x: (Box<int>, int)) -> (Box<int>, int) {
x
}
````
With optimizations, this currently results in:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.memset.p0i8.i64(i8* %2, i8 0, i64 16, i32 8, i1 false)
ret void
}
````
But with lifetime intrinsics we get:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.lifetime.end(i64 16, i8* %2)
ret void
}
````
Fixes#15665
`call_visit_glue` is only ever called from trans_intrinsic, and the
block won't be unreachable there. Also, the comment doesn't make sense
anymore. When the code was introduced in 38fee9526a the function was
also responsible for the cleanup glue, which is no longer the case.
While we're at it, also fixed the debug message to output the right
function name.
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
r? @nick29581
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
`call_visit_glue` is only ever called from trans_intrinsic, and the
block won't be unreachable there. Also, the comment doesn't make sense
anymore. When the code was introduced in 38fee9526a the function was
also responsible for the cleanup glue, which is no longer the case.
While we're at it, also fixed the debug message to output the right
function name.
This should fix issue #15541. It would be good to have an test case for this would also be nice but I haven't had the time to write one. The change is very small though and it doesn't break anything in the existing test suite, so I guess we can add it without test for now.
except where trait objects are involved.
Part of issue #15349, though I'm leaving it open for trait objects.
Cross borrowing for trait objects remains because it is needed until we
have DST.
This will break code like:
fn foo(x: &int) { ... }
let a = box 3i;
foo(a);
Change this code to:
fn foo(x: &int) { ... }
let a = box 3i;
foo(&*a);
[breaking-change]
This makes two changes to region inference: (1) it allows region
inference to relate early-bound regions; and (2) it allows regions to be
related before variance runs. The former is needed because there is no
relation between the two regions before region substitution happens,
while the latter is needed because type collection has to run before
variance. We assume that, before variance is inferred, that lifetimes
are invariant. This is a conservative overapproximation.
This relates to #13885. This does not remove `~self` from the language
yet, however.
[breaking-change]
Disabling the redzone is required in x86-64's kernel mode to avoid interrupts trashing the stack.
I'm not sure if decl_fn is the right place to tag all functions with noredzone. It might have interactions with external functions when linking with bitcode built without -C no-redzone although I see no reason to do that.
I'm not sure how to write a test inspecting the bitcode output for noredzone attributes on all functions either.
Per @pnkfelix 's suggestion, using a trait to make these
field accesses more readable (and vastly more similar
to the original code.
oops fix new ast_map fix
This change propagates to many locations, but because of the
Macro Exterminator (or, more properly, the invariant that it
protects), macro invocations can't occur downstream of expansion.
This means that in librustc and librustdoc, extracting the
desired field can simply assume that it can't be a macro
invocation. Functions in ast_util abstract over this check.
This removes a bunch of token types. Tokens now store the original, unaltered
numeric literal (that is still checked for correctness), which is parsed into
an actual number later, as needed, when creating the AST.
This can change how syntax extensions work, but otherwise poses no visible
changes.
[breaking-change]
formerly, the self identifier was being discarded during parsing, which
stymies hygiene. The best fix here seems to be to attach a self identifier
to ExplicitSelf_, a change that rippled through the rest of the compiler,
but without any obvious damage.
Extend the null ptr optimization to work with slices, closures, procs, & trait objects by using the internal pointers as the discriminant.
This decreases the size of `Option<&[int]>` (and similar) by one word.
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
r? @nick29581
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
LLVM doesn't handle i1 value in allocas/memory very well and skips a number of optimizations if it hits it. So we have to do the same thing that Clang does, using i1 for SSA values, but storing i8 in memory.
Fixes#15203.
LLVM doesn't really like types with a bit-width that isn't a multiple of
8 and disable various optimizations if it encounters such types used
with loads/stores. OTOH, booleans must be represented as i1 when used as
SSA values. To get the best results, we must use i1 for SSA values, and
i8 when storing the value to memory.
By using range asserts on loads, LLVM can eliminate the required
zero-extend and truncate operations.
Fixes#15203
This comit implements a new flag, --extern, which is used to specify where a
crate is located. The purpose of this flag is to bypass the normal crate
loading/matching of the compiler to point it directly at the right file.
This flag takes the form `--extern foo=bar` where `foo` is the name of a crate
and `bar` is the location at which to find the crate. Multiple `--extern`
directives are allowed with the same crate name to specify the rlib/dylib pair
for a crate. It is invalid to specify more than one rlib or more than one dylib,
and it's required that the crates are valid rust crates.
I have also added some extensive documentation to metadata::loader about how
crate loading should work.
RFC: 0035-remove-crate-id
This commit removes all support in the compiler for the #[crate_id] attribute
and all of its derivative infrastructure. A list of the functionality removed is:
* The #[crate_id] attribute no longer exists
* There is no longer the concept of a version of a crate
* Version numbers are no longer appended to symbol names
* The --crate-id command line option has been removed
To migrate forward, rename #[crate_id] to #[crate_name] and only the name of the
crate itself should be mentioned. The version/path of the old crate id should be
removed.
For a transitionary state, the #[crate_id] attribute is still accepted if
the #[crate_name] is not present, but it is warned about if it is the only
identifier present.
RFC: 0035-remove-crate-id
[breaking-change]
In my informal measurements, this brings the peak memory usage when
building librustc from 1662M down to 1502M. Since 1662 - 1502 = 160,
this may not recover the entirety of the observed memory regression
(250M) from PR #14604. (However, according to my local measurements,
the regression when building librustc was more like 209M, so perhaps
this will still recover the lions share of the lost memory.)
This basically meant changing the interface so that no borrowed `&Vec`
is exposed, by hiding `fn get_vec` and `fn get_mut_vec` and revising
`fn all_vecs`.
Instead, clients should use one of the other methods; `get_slice`,
`pop`, `truncate`, `replace`, `push_all`, or `is_empty_in`, which
should work for any case currently used in rustc.
This pull request adds hygiene for 3 kinds of argument bindings:
- arguments to item fns,
- arguments to `ExprFnBlock`s, and
- arguments to `ExprProc`s
It also adds a bunch of unit tests, fixes a few macro uses to be non-capturing, and has a few cleanup items.
local `make check` succeeds.
Closes#15276 (Guide: if)
Closes#15280 (std::os - Add join_paths, make setenv non-utf8 capable)
Closes#15314 (Guide: functions)
Closes#15327 (Simplify PatIdent to contain an Ident rather than a Path)
Closes#15340 (Guide: add mutable binding section)
Closes#15342 (Fix ICE with nested macro_rules!-style macros)
Closes#15350 (Remove duplicated slash in install script path)
Closes#15351 (correct a few spelling mistakes in the tutorial)
Closes#15352 (librustc: Have the kind checker check sub-bounds in trait casts.)
Closes#15359 (Fix spelling errors.)
Closes#15361 (Rename set_broadast() to set_broadcast().)
Closes#15366 (Simplify creating a parser from a token tree)
Closes#15367 (Add examples for StrVector methods)
Closes#15372 (Vec::grow should use reserve_additional, Vec::reserve should check against capacity)
Closes#15373 (Fix minor issues in the documentation of libtime.)
Rationale: for what appear to be historical reasons only, the PatIdent contains
a Path rather than an Ident. This means that there are many places in the code
where an ident is artificially promoted to a path, and---much more problematically---
a bunch of elements from a path are simply thrown away, which seems like an invitation
to some really nasty bugs.
This commit replaces the Path in a PatIdent with a SpannedIdent, which just contains an ident
and a span.
This was causing lots of ICEs in cargo. I sadly wasn't ever able to reduce the
test case down, but I presume that's because it has to do with node id
collisions which are pretty difficult to turn up...
So far, type names generated for debuginfo where a bit sketchy. It was not clearly defined when a name should be fully qualified and when not, if region parameters should be shown or not, and other things like that.
This commit makes the debuginfo module responsible for creating type names instead of using `ppaux::ty_to_str()` and brings type names (as they show up in the DWARF information) in line with GCC and Clang:
* The name of the type being described is unqualified. It's path is defined by its position in the namespace hierarchy.
* Type arguments are always fully qualified, no matter if they would actually be in scope at the type definition location.
Care is also taken to make type names consistent across crate boundaries. That is, the code now tries make the type name the same, regardless if the type is in the local crate or reconstructed from metadata. Otherwise LLVM will complain about violating the one-definition-rule when using link-time-optimization.
This commit also removes all source location information from type descriptions because these cannot be reconstructed for types instantiated from metadata. Again, with LTO enabled, this can lead to two versions of the debuginfo type description, one with and one without source location information, which then triggers the LLVM ODR assertion.
Fortunately, source location information about types is rarely used, so this has little impact. Once source location information is preserved in metadata (#1972) it can also be re-enabled for type descriptions.
`RUSTFLAGS=-g make check` no works again for me locally, including the LTO test cases (note that I've taken care of #15156 by reverting the change in LLVM that @luqmana identified as the culprit for that issue).
So far, type names generated for debuginfo where a bit sketchy. It was not clearly defined when a name should be fully qualified and when not, if region parameters should be shown or not, and other things like that.
This commit makes the debuginfo module responsible for creating type names instead of using ppaux::ty_to_str() and brings type names, as they show up in the DWARF information, in line with GCC and Clang:
* The name of the type being described is unqualified. It's path is defined by its position in the namespace hierarchy.
* Type arguments are always fully qualified, no matter if they would actually be in scope at the type definition location.
Care is also taken to reliably make type names consistent across crate boundaries. That is, the code now tries make the type name the same, regardless if the type is in the local crate or reconstructed from metadata. Otherwise LLVM will complain about violating the one-definition-rule when using link-time-optimization.
This commit also removes all source location information from type descriptions because these cannot be reconstructed for types instantiated from metadata. Again, with LTO enabled, this can lead to two versions of the debuginfo type description, one with and one without source location information, which then triggers the LLVM ODR assertion.
Fortunately, source location information about types is rarely used, so this has little impact. Once source location information is preserved in metadata (#1972) it can also be reenabled for type descriptions.
floating point numbers for real.
This will break code that looks like:
let mut x = 0;
while ... {
x += 1;
}
println!("{}", x);
Change that code to:
let mut x = 0i;
while ... {
x += 1;
}
println!("{}", x);
Closes#15201.
[breaking-change]
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
The f128 type has very little support in the compiler and the feature is
basically unusable today. Supporting half-baked features in the compiler can be
detrimental to the long-term development of the compiler, and hence this feature
is being removed.
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
The f128 type has very little support in the compiler and the feature is
basically unusable today. Supporting half-baked features in the compiler can be
detrimental to the long-term development of the compiler, and hence this feature
is being removed.
Also change some code formatting.
lint::builtin becomes a sibling of lint::context in order to ensure that lints
implemented there use the same public API as lint plugins.
We're going to have more modules under lint, and the paths get unwieldy. We
also plan to have lints run at multiple points in the compilation pipeline.
The aim of these changes is not working out a generic bi-endianness architectures support but to allow people develop for little endian MIPS machines (issue #7190).
We currently compiled bools to i8 values, because there was a bug in
LLVM that sometimes caused miscompilations when using i1 in, for
example, structs.
Using i8 means a lot of unnecessary zero-extend and truncate operations
though, since we have to convert the value from and to i1 when using for
example icmp or br instructions. Besides the unnecessary overhead caused
by this, it also sometimes made LLVM miss some optimizations.
Fixes#8106.
To fix#8106, we need an LLVM version that contains r211082 aka 0dee6756
which fixes a bug that blocks that issue.
There have been some tiny API changes in LLVM, and cmpxchg changed its
return type. The i1 part of the new return type is only interesting when
using the new weak cmpxchg, which we don't do.
When calling a foreign function, some arguments and/or return value
attributes are required to conform to the foreign ABI. Currently those
attributes are only added to the declaration of foreign functions. With
direct calls, this is no problem, because LLVM can see that those
attributes apply to the call. But with an indirect call, LLVM cannot do
that and the attribute is missing.
To fix that, we have to add those attribute to the calls to foreign
functions as well.
This also allows to remove the special handling of the SRet attribute,
which is ABI-dependent and will be set via the `attr` field of the
return type's `ArgType`.
The ArgType type gives us a generic way to specify an attribute for a
type to ensure ABI conformance for foreign functions. But the code that
actually sets the argument attributes in the function declaration
only sets the attribute for the return type when the type is indirect.
Since LLVMAddAttribute() doesn't allow to set attributes on the return
type, we have to use LLVMAddFunctionAttribute() instead.
This didn't cause problems yet, because currently only some indirect
types require attributes to be set.
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
Fixes a codegen bug which generates illegal non-terminated LLVM block
when there are wildcard pattern with guard and enum patterns in a match
expression. Also refactors the code a little.
Closes#14865
See #14646 (tracking issue) and rust-lang/rfcs#69.
This does not close the tracking issue, as the `bytes!()` macro still needs to be removed. It will be later, after a snapshot is made with the changes in this PR, so that the new syntax can be used when bootstrapping the compiler.
Use ty_rptr/ty_uniq(ty_trait) rather than TraitStore to represent trait types.
Also addresses (but doesn't close) #12470.
Part of the work towards DST (#12938).
Use ty_rptr/ty_uniq(ty_trait) rather than TraitStore to represent trait types.
Also addresses (but doesn't close) #12470.
Part of the work towards DST (#12938).
[breaking-change] lifetime parameters in `&mut trait` are now invariant. They used to be contravariant.
`#[inline(never)]` is used.
Closes#8958.
This can break some code that relied on the addresses of statics
being distinct; add `#[inline(never)]` to the affected statics.
[breaking-change]
So far handling some indirectly recursive types, such as pointer types, has relied on LLVM metadata uniquing in a very implicit way. This could cause some inconsistencies in the debuginfo, and sometimes to hard to trace LLVM assertions.
With this commit unique type IDs and the TypeMap are used to explicitly make sure that no inconsistencies exist, and, if in the future some regression re-introduces one, give a better error message instead of the hard-to-interpret LLVM error.
This removes all remnants of `@` pointers from rustc. Additionally, this removes
the `GC` structure from the prelude as it seems odd exporting an experimental
type in the prelude by default.
Closes#14193
[breaking-change]
only known post-monomorphization, and report `transmute` errors before
the code is generated for that `transmute`.
This can break code that looked like:
unsafe fn f<T>(x: T) {
let y: int = transmute(x);
}
Change such code to take a type parameter that has the same size as the
type being transmuted to.
Closes#12898.
[breaking-change]
parameters
This involves numerous substeps:
1. Treat Self same as any other parameter.
2. No longer compute offsets for method parameters.
3. Store all generic types (both trait/impl and method) with a method,
eliminating odd discrepancies.
4. Stop doing unspeakable things to static methods and instead just use
the natural types, now that we can easily add the type parameters from
trait into the method's polytype.
5. No doubt some more. It was hard to separate these into distinct commits.
Fixes#13564
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
With this change, rustc creates a unique type identifier for types in debuginfo. These type identifiers are used by LLVM to correctly handle link-time-optimization scenarios but also help rustc with dealing with inlining from other crates. For more information, see the documentation block at the top of librustc/middle/trans/debuginfo.rs.
Fixes#13681.
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This commit uses the same trick as ~/Box to map Gc<T> to @T internally inside
the compiler. This moves a number of implementations of traits to the `gc`
module in the standard library.
This removes functions such as `Gc::new`, `Gc::borrow`, and `Gc::ptr_eq` in
favor of the more modern equivalents, `box(GC)`, `Deref`, and pointer equality.
The Gc pointer itself should be much more useful now, and subsequent commits
will move the compiler away from @T towards Gc<T>
[breaking-change]
If this breaks your code, take a deep breath, go for a walk, and
consider why you're relying on the sign extension semantics of
enum-to-float casts.
[breaking-change]
Closes#8230.
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
Previously, constants used unsigned extension, while non-constants used
signed extension. This unifies both paths to use signed extension.
If this breaks your code, take a deep breath, go for a walk, and
consider why you're relying on the sign extension semantics of
enum-to-float casts.
Closes#8230.
[breaking-change]
All rust functions are internal implementation details with respect to the ABI
exposed by crates, but extern fns are public components of the ABI and shouldn't
be stripped. This commit serializes reachable extern fns to metadata, so when
LTO is performed all of their symbols are not stripped.
Closes#14500
Division and remainder by 0 are undefined behavior, and are detected at runtime.
This commit adds support for ensuring that MIN / -1 is also checked for at
runtime, as this would cause signed overflow, or undefined behvaior.
Closes#8460
This commit removes the <M: Any + Send> type parameter from Option::expect in
favor of just taking a hard-coded `&str` argument. This allows this function to
move into libcore.
Previous code using strings with `expect` will continue to work, but code using
this implicitly to transmit task failure will need to unwrap manually with a
`match` statement.
[breaking-change]
Closes#14008
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
So far the DWARF information for enums was different for regular enums, univariant enums, Option-like enums, etc. Regular enums were encoded as unions of structs, while the other variants were encoded as bare structs. With the changes in this PR all enums are encoded as unions so that debuggers can reconstruct if something originally was a struct, a univariant enum, or an Option-like enum. For the latter case, information about the *Null* variant is encoded into the union field name. This information can then be used by the debugger to print a `None` value actually as `None` instead of `Some(0x0)`.
The changes in this PR should also fix the regression reported in #14385 and #14411, but I want to close these only after I have confirmation from the original reporters that the issues are actually fixed for them.
So far the DWARF information for enums was different
for regular enums, univariant enums, Option-like enums,
etc. Regular enums were encoded as unions of structs,
while the other variants were encoded as bare structs.
With the changes in this PR all enums are encoded as
unions so that debuggers can reconstruct if something
originally was a struct, a univariant enum, or an
Option-like enum. For the latter case, information
about the Null variant is encoded into the union field
name. This information can then be used by the
debugger to print a None value actually as None
instead of Some(0x0).
We can now mark arguments and returns as `nonnull` in LLVM. It's still somewhat limited by the fact that LLVM loses this information after inlining but it might help in certain cases.
It can be easy to accidentally bloat the size of an enum by making one variant
larger than the others. When this happens, it usually goes unnoticed. This
commit adds a lint that can warn when the largest variant in an enum is more
than 3 times larger than the second-largest variant. This requires a little
bit of rejiggering, because size information is only available in trans, but
lint levels are only available in the lint context.
It is allow by default because it's pretty noisy, and isn't really *that*
undesirable.
Closes#10362
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
The #[phase(syntax,link)] attribute on `extern crate std` needs to be an
outer attribute so it can pretty-print properly.
Also add `#![no_std]` and `#[feature(phase)]` so compiling the
pretty-printed source will work.
The #[phase(syntax,link)] attribute on `extern crate std` needs to be an
outer attribute so it can pretty-print properly.
Also add `#![no_std]` and `#[feature(phase)]` so compiling the
pretty-printed source will work.
Consider PatEnums constructed with A(..) to be candidates for tuple
struct patterns, not just ones constructed with A(a,b,c). If these
patterns shouldn't be valid tuple struct patterns (as they're equivalent
to _), this needs to be caught before we get to trans.
Fixes#14308.
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
This slightly adjusts the NullablePointer representation for some enums in the case where the non-nullable variant has a single field (the ptr field) to be just that, the pointer. This is in contrast to the current behaviour where we'd wrap that single pointer in a LLVM struct.
Fixes#11040 & #11303.
Add `EntryPat` and `NodePat` variants to ast_map, so that lookups for
id 1 in `let S{val: _x /* pat 2 */} /* pat 1 */ = ...` will actually
resolve to the pattern `S{ ... }`, rather than "unknown node", in a
function like `node_id_to_str`.
The core library in theory has 0 dependencies, but in practice it has some in
order for it to be efficient. These dependencies are in the form of the basic
memory operations provided by libc traditionally, such as memset, memcmp, etc.
These functions are trivial to implement and themselves have 0 dependencies.
This commit adds a new crate, librlibc, which will serve the purpose of
providing these dependencies. The crate is never linked to by default, but is
available to be linked to by downstream consumers. Normally these functions are
provided by the system libc, but in other freestanding contexts a libc may not
be available. In these cases, librlibc will suffice for enabling execution with
libcore.
cc #10116
LLVM internally uses `uint64_t` for array size, but the corresponding
C API (`LLVMArrayType`) uses `unsigned int` so ths value is truncated.
Therefore rustc generates wrong type for fixed-sized large vector e.g.
`[0 x i8]` for `[0u8, ..(1 << 32)]`.
This patch adds `LLVMRustArrayType` function for `uint64_t` support.
The goal of this refactoring is to make the rustc driver code easier to understand and use. Since this is as close to an API as we have, I think it is important that it is nice. On getting stuck in, I found that there wasn't as much to change as I'd hoped to make the stage... functions easier to use by tools (which is a good thing :-) ).
This patch only moves code around - mostly just moving code to different files, but a few extracted method refactorings too. To summarise the changes: I added driver::config which handles everything about configuring the compiler. driver::session now just defines and builds session objects. I moved driver code from librustc/lib.rs to librustc/driver/mod.rs so all the code is one place. I extracted methods to make emulating the compiler without being the compiler a little easier. Within the driver directory, I moved code around to more logically fit in the modules.
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
The goal of this refactoring is to make the rustc driver code easier to understand and use. Since this is as close to an API as we have, I think it is important that it is nice. On getting stuck in, I found that there wasn't as much to change as I'd hoped to make the stage... fns easier to use by tools.
This patch only moves code around - mostly just moving code to different files, but a few extracted method refactorings too. To summarise the changes: I added driver::config which handles everything about configuring the compiler. driver::session now just defines and builds session objects. I moved driver code from librustc/lib.rs to librustc/driver/mod.rs so all the code is one place. I extracted methods to make emulating the compiler without being the compiler a little easier. Within the driver directory, I moved code around to more logically fit in the modules.
ty::substs struct. This is a holdover from the olden days of yore. This patch
removes the last vestiges of that practice. This is part of the work
I was doing on #5527.
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.set()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* The `pop` and `set` methods have been combined into one method, `replace`
* The `get_mut` method has been removed. All interior mutability should be done
through `RefCell`.
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.replace()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
Previously, the parser would not allow you to simultaneously implement a
function with a different abi as well as being unsafe at the same time. This
extends the parser to allow functions of the form:
unsafe extern fn foo() {
// ...
}
The closure type grammar was also changed to reflect this reversal, types
previously written as "extern unsafe fn()" must now be written as
"unsafe extern fn()". The parser currently has a hack which allows the old
style, but this will go away once a snapshot has landed.
Closes#10025
[breaking-change]
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
Previously, the parser would not allow you to simultaneously implement a
function with a different abi as well as being unsafe at the same time. This
extends the parser to allow functions of the form:
unsafe extern fn foo() {
// ...
}
The closure type grammar was also changed to reflect this reversal, types
previously written as "extern unsafe fn()" must now be written as
"unsafe extern fn()". The parser currently has a hack which allows the old
style, but this will go away once a snapshot has landed.
Closes#10025
[breaking-change]
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
By carefully distinguishing falling back to the default arm from moving
on to the next pattern, this patch adjusts the codegen logic for range
and guarded arms of pattern matching expression. It is a more
appropriate way of fixing #12582 and #13027 without causing regressions
such as #13867.
Closes#13867
This patch fixes issue #13186.
When generating constant expression for enum, it is possible that
alignment of expression may be not equal to alignment of type. In that
case space after last struct field must be padded to match size of value
and size of struct. This commit adds that padding.
See detailed explanation in src/test/run-pass/trans-tag-static-padding.rs
This was removed because these could alias with `&const T` or `@mut T`
and those are now gone from the language. There are still aliasing
issues within local scopes, but this is correct for function parameters.
This also removes the no-op `noalias` marker on proc (not a pointer) and
leaves out the mention of #6750 because real type-based alias analysis
is not within the scope of best effort usage of the `noalias` attribute.
Test case:
pub fn foo(x: &mut &mut u32) {
**x = 5;
**x = 5;
}
Before:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
%2 = load i32** %0, align 8
store i32 5, i32* %2, align 4
ret void
}
After:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** noalias nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
ret void
}
Closes#12436
By carefully distinguishing falling back to the default arm from moving
on to the next pattern, this patch adjusts the codegen logic for range
and guarded arms of pattern matching expression. It is a more
appropriate way of fixing #12582 and #13027 without causing regressions
such as #13867.
Closes#13867
This has long since not been too relevant since the introduction of many crate
type outputs. This commit removes the flag entirely, adjusting all logic to do
the most reasonable thing when building both a library and an executable.
Closes#13337
This was removed because these could alias with `&const T` or `@mut T`
and those are now gone from the language. There are still aliasing
issues within local scopes, but this is correct for function parameters.
This also removes the no-op `noalias` marker on proc (not a pointer) and
leaves out the mention of #6750 because real type-based alias analysis
is not within the scope of best effort usage of the `noalias` attribute.
Test case:
pub fn foo(x: &mut &mut u32) {
**x = 5;
**x = 5;
}
Before:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
%2 = load i32** %0, align 8
store i32 5, i32* %2, align 4
ret void
}
After:
define void @_ZN3foo20h0ce94c9671b0150bdaa4v0.0E(i32** noalias nocapture readonly) unnamed_addr #0 {
entry-block:
%1 = load i32** %0, align 8
store i32 5, i32* %1, align 4
ret void
}
Closes#12436
This has long since not been too relevant since the introduction of many crate
type outputs. This commit removes the flag entirely, adjusting all logic to do
the most reasonable thing when building both a library and an executable.
Closes#13337
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
Pre-step towards issue #12624 and others: Introduce ExprUseVisitor, remove the
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
r? @alexcrichton
Similar to my recent changes to ~[T]/&[T], these changes remove the vstore abstraction and represent str types as ~(str) and &(str). The Option<uint> in ty_str is the length of the string, None if the string is dynamically sized.
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
This patch removes the special auto-rooting for `@` from the borrow checker. With `@` moving into a library, it doesn't make sense to keep this code around anymore. It also simplifies `trans` by removing root checking from there
@nikomatsakis
Closes: #11586
This exposes volatile versions of the memset/memmove/memcpy intrinsics.
The volatile parameter must be constant, so this can't simply be a
parameter to our intrinsics.
This currently requires linking against a library like libquadmath (or
libgcc), because compiler-rt barely has any support for this and most
hardware does not yet have 128-bit precision floating point. For this
reason, it's currently hidden behind a feature gate.
When compiler-rt is updated to trunk, some tests can be added for
constant evaluation since there will be support for the comparison
operators.
Closes#13381
This exposes volatile versions of the memset/memmove/memcpy intrinsics.
The volatile parameter must be constant, so this can't simply be a
parameter to our intrinsics.
Refactores all uses of ty_vec and associated things to remove the vstore abstraction (still used for strings, for now). Pointers to vectors are stored as ty_rptr or ty_uniq wrapped around a ty_vec. There are no user-facing changes. Existing behaviour is preserved by special-casing many instances of pointers containing vectors. Hopefully with DST most of these hacks will go away. For now it is useful to leave them hanging around rather than abstracting them into a method or something.
Closes#13554.
In upgrading LLVM, only rust functions had the "split-stack" attribute added.
This commit changes the addition of LLVM's "split-stack" attribute to *always*
occur and then we remove it sometimes if the "no_split_stack" rust attribute is
present.
Closes#13625
This is a bit of an interesting upgrade to LLVM. Upstream LLVM has started using C++11 features, so they require a C++11 compiler to build. I've updated all the bots to have a C++11 compiler, and they appear to be building LLVM successfully:
* Linux bots - I added gcc/g++ 4.7 (good enough)
* Android bots - same as the linux ones
* Mac bots - I installed the most recent command line tools for Lion which gives us clang 3.2, but LLVM wouldn't build unless it was explicitly asked to link to `libc++` instead of `libstdc++`. This involved tweaking `mklldeps.py` and the `configure` script to get things to work out
* Windows bots - mingw-w64 has gcc 4.8.1 which is sufficient for building LLVM (hurray!)
* BSD bots - I updated FreeBSD to 10.0 which brought with it a relevant version of clang.
The largest fallout I've seen so far is that the test suite doesn't work at all on FreeBSD 10. We've already stopped gating on FreeBSD due to #13427 (we used to be on freebsd 9), so I don't think this puts us in too bad of a situation. I will continue to attempt to fix FreeBSD and the breakage on there.
The LLVM update brings with it all of the recently upstreamed LLVM patches. We only have one local patch now which is just an optimization, and isn't required to use upstream LLVM. I want to maintain compatibility with LLVM 3.3 and 3.4 while we can, and this upgrade is keeping us up to date with the 3.5 release. Once 3.5 is release we will in theory no longer require a bundled LLVM.
This comes with a number of fixes to be compatible with upstream LLVM:
* Previously all monomorphizations of "mem::size_of()" would receive the same
symbol. In the past LLVM would silently rename duplicated symbols, but it
appears to now be dropping the duplicate symbols and functions now. The symbol
names of monomorphized functions are now no longer solely based on the type of
the function, but rather the type and the unique hash for the
monomorphization.
* Split stacks are no longer a global feature controlled by a flag in LLVM.
Instead, they are opt-in on a per-function basis through a function attribute.
The rust #[no_split_stack] attribute will disable this, otherwise all
functions have #[split_stack] attached to them.
* The compare and swap instruction now takes two atomic orderings, one for the
successful case and one for the failure case. LLVM internally has an
implementation of calculating the appropriate failure ordering given a
particular success ordering (previously only a success ordering was
specified), and I copied that into the intrinsic translation so the failure
ordering isn't supplied on a source level for now.
* Minor tweaks to LLVM's API in terms of debuginfo, naming, c++11 conventions,
etc.
Part of this required added an override of `fold_type_method` in the
Folder for Ctx impl; it follows the same pattern as `fold_method`.
Also, as a drive-by fix, I moved all of the calls to `folder.new_id`
in syntax::fold's no-op default traversal to really be the first
statement in each function.
* This is to uphold the invariant that `folder.new_id` is always
called first (an unfortunate requirement of the current `ast_map`
code), an invariant that we seemingly were breaking in e.g. the
previous `noop_fold_block`.
* Now it should be easier to see when adding new code that this
invariant must be upheld.
* (note that the breakage in `noop_fold_block` may not have mattered
so much previously, since the only thing that blocks can bind are
lifetimes, which I am only adding support for now.)
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
This patch fixes issue #13186.
When generating constant expression for enum, it is possible that
alignment of expression may be not equal to alignment of type. In that
case space after last struct field must be padded to match size of value
and size of struct. This commit adds that padding.
See detailed explanation in src/test/run-pass/trans-tag-static-padding.rs
Cleans up some remnants of the old mutability system and only allows vector/trait mutability in `VstoreSlice` (`&mut [T]`) and `RegionTraitStore` (`&mut Trait`).
libstd: Implement `StrBuf`, a new string buffer type like `Vec`, and port all code over to use it.
Rebased & tests-fixed version of https://github.com/mozilla/rust/pull/13269
This commit makes sure that code inlined from other functions isn't assigned the source position of the call site, since this leads to undesired behavior when setting line breakpoints (issue #12886)
Previously, if statements of the form "Foo;" or "let _ = Foo;" were encountered
where Foo had a destructor, the destructors were not run. This changes
the relevant locations in trans to check for ty::type_needs_drop and invokes
trans_to_lvalue instead of trans_into.
Closes#4734Closes#6892
`RefCell::get` can be a bit surprising, because it actually clones the wrapped value. This removes `RefCell::get` and replaces all the users with `RefCell::borrow()` when it can, and `RefCell::borrow().clone()` when it can't. It removes `RefCell::set` for consistency. This closes#13182.
It also fixes an infinite loop in a test when debugging is on.
This was missed when dropping the null-termination from our string
types. An explicit null byte can still be placed anywhere in a string if
desired, but there's no reason to stick one at the end of every string
constant.
It's surprising that `RefCell::get()` is implicitly doing a clone
on a value. This patch removes it and replaces all users with
either `.borrow()` when we can autoderef, or `.borrow().clone()`
when we cannot.
This was missed when dropping the null-termination from our string
types. An explicit null byte can still be placed anywhere in a string if
desired, but there's no reason to stick one at the end of every string
constant.
This change removes the AbiSet from the AST, converting all usage to have just
one Abi value. The current scheme selects a relevant ABI given a list of ABIs
based on the target architecture and how relevant each ABI is to that
architecture.
Instead of this mildly complicated scheme, only one ABI will be allowed in abi
strings, and pseudo-abis will be created for special cases as necessary. For
example the "system" abi exists for stdcall on win32 and C on win64.
Closes#10049
This commit deals with the fallout of the previous change by making tuples
structs have public fields where necessary (now that the fields are private by
default).
Only supports crate level statics. No debug info is generated for function level statics. Closes#9227.
As discussed at the end of the comments for #9227, I took an initial stab at adding support for function level statics and decided it would be enough work to warrant being split into a separate issue.
See #13144 for the new issue describing the need to add support for function level static variables.
The `_match.rs` takes advantage of passes prior to `trans` and
aggressively prunes the sub-match tree based on exact equality. When it
comes to literal or range, the strategy may lead to wrong result if
there's guard function or multiple patterns inside tuple.
Closes#12582.
Closes#13027.
This needs to be removed as part of removing `~[T]`. Partial type hints
are now allowed, and will remove the need to add a version of this
method for `Vec<T>`. For now, this involves a few workarounds for
partial type hints not completely working.
