Use the first codegen backend in the config.toml as default
It is currently hard coded to llvm if enabled and cranelift otherwise.
This made some sense when cranelift was the only alternative codegen
backend. Since the introduction of the gcc backend this doesn't make
much sense anymore. Before this PR bootstrapping rustc using a backend
other than llvm or cranelift required changing the source of
rustc_interface. With this PR it becomes a matter of putting the right
backend as first enabled backend in config.toml.
cc ```@antoyo```
It is currently hard coded to llvm if enabled and cranelift otherwise.
This made some sense when cranelift was the only alternative codegen
backend. Since the introduction of the gcc backend this doesn't make
much sense anymore. Before this PR bootstrapping rustc using a backend
other than llvm or cranelift required changing the source of
rustc_interface. With this PR it becomes a matter of putting the right
backend as first enabled backend in config.toml.
No branch protection metadata unless enabled
Even if we emit metadata disabling branch protection, this metadata may
conflict with other modules (e.g. during LTO) that have different branch
protection metadata set.
This is an unstable flag and feature, so ideally the flag not being
specified should act as if the feature wasn't implemented in the first
place.
Additionally this PR also ensures we emit an error if
`-Zbranch-protection` is set on targets other than the supported
aarch64. For now the error is being output from codegen, but ideally it
should be moved to earlier in the pipeline before stabilization.
Use undef for (some) partially-uninit constants
There needs to be some limit to avoid perf regressions on large arrays
with undef in each element (see comment in the code).
Fixes: #84565
Original PR: #83698
Depends on LLVM 14: #93577
rustc_errors: let `DiagnosticBuilder::emit` return a "guarantee of emission".
That is, `DiagnosticBuilder` is now generic over the return type of `.emit()`, so we'll now have:
* `DiagnosticBuilder<ErrorReported>` for error (incl. fatal/bug) diagnostics
* can only be created via a `const L: Level`-generic constructor, that limits allowed variants via a `where` clause, so not even `rustc_errors` can accidentally bypass this limitation
* asserts `diagnostic.is_error()` on emission, just in case the construction restriction was bypassed (e.g. by replacing the whole `Diagnostic` inside `DiagnosticBuilder`)
* `.emit()` returns `ErrorReported`, as a "proof" token that `.emit()` was called
(though note that this isn't a real guarantee until after completing the work on
#69426)
* `DiagnosticBuilder<()>` for everything else (warnings, notes, etc.)
* can also be obtained from other `DiagnosticBuilder`s by calling `.forget_guarantee()`
This PR is a companion to other ongoing work, namely:
* #69426
and it's ongoing implementation:
#93222
the API changes in this PR are needed to get statically-checked "only errors produce `ErrorReported` from `.emit()`", but doesn't itself provide any really strong guarantees without those other `ErrorReported` changes
* #93244
would make the choices of API changes (esp. naming) in this PR fit better overall
In order to be able to let `.emit()` return anything trustable, several changes had to be made:
* `Diagnostic`'s `level` field is now private to `rustc_errors`, to disallow arbitrary "downgrade"s from "some kind of error" to "warning" (or anything else that doesn't cause compilation to fail)
* it's still possible to replace the whole `Diagnostic` inside the `DiagnosticBuilder`, sadly, that's harder to fix, but it's unlikely enough that we can paper over it with asserts on `.emit()`
* `.cancel()` now consumes `DiagnosticBuilder`, preventing `.emit()` calls on a cancelled diagnostic
* it's also now done internally, through `DiagnosticBuilder`-private state, instead of having a `Level::Cancelled` variant that can be read (or worse, written) by the user
* this removes a hazard of calling `.cancel()` on an error then continuing to attach details to it, and even expect to be able to `.emit()` it
* warnings were switched to *only* `can_emit_warnings` on emission (instead of pre-cancelling early)
* `struct_dummy` was removed (as it relied on a pre-`Cancelled` `Diagnostic`)
* since `.emit()` doesn't consume the `DiagnosticBuilder` <sub>(I tried and gave up, it's much more work than this PR)</sub>,
we have to make `.emit()` idempotent wrt the guarantees it returns
* thankfully, `err.emit(); err.emit();` can return `ErrorReported` both times, as the second `.emit()` call has no side-effects *only* because the first one did do the appropriate emission
* `&mut Diagnostic` is now used in a lot of function signatures, which used to take `&mut DiagnosticBuilder` (in the interest of not having to make those functions generic)
* the APIs were already mostly identical, allowing for low-effort porting to this new setup
* only some of the suggestion methods needed some rework, to have the extra `DiagnosticBuilder` functionality on the `Diagnostic` methods themselves (that change is also present in #93259)
* `.emit()`/`.cancel()` aren't available, but IMO calling them from an "error decorator/annotator" function isn't a good practice, and can lead to strange behavior (from the caller's perspective)
* `.downgrade_to_delayed_bug()` was added, letting you convert any `.is_error()` diagnostic into a `delay_span_bug` one (which works because in both cases the guarantees available are the same)
This PR should ideally be reviewed commit-by-commit, since there is a lot of fallout in each.
r? `@estebank` cc `@Manishearth` `@nikomatsakis` `@mark-i-m`
Improve `--check-cfg` implementation
This pull-request is a mix of improvements regarding the `--check-cfg` implementation:
- Simpler internal representation (usage of `Option` instead of separate bool)
- Add --check-cfg to the unstable book (based on the RFC)
- Improved diagnostics:
* List possible values when the value is unexpected
* Suggest if possible a name or value that is similar
- Add more tests (well known names, mix of combinations, ...)
r? ```@petrochenkov```
Adopt let else in more places
Continuation of #89933, #91018, #91481, #93046, #93590, #94011.
I have extended my clippy lint to also recognize tuple passing and match statements. The diff caused by fixing it is way above 1 thousand lines. Thus, I split it up into multiple pull requests to make reviewing easier. This is the biggest of these PRs and handles the changes outside of rustdoc, rustc_typeck, rustc_const_eval, rustc_trait_selection, which were handled in PRs #94139, #94142, #94143, #94144.
Even if we emit metadata disabling branch protection, this metadata may
conflict with other modules (e.g. during LTO) that have different branch
protection metadata set.
This is an unstable flag and feature, so ideally the flag not being
specified should act as if the feature wasn't implemented in the first
place.
Additionally this PR also ensures we emit an error if
`-Zbranch-protection` is set on targets other than the supported
aarch64. For now the error is being output from codegen, but ideally it
should be moved to earlier in the pipeline before stabilization.
Deny mixing bin crate type with lib crate types
The produced library would get a main shim too which conflicts with the
main shim of the executable linking the library.
```
$ cat > main1.rs <<EOF
fn main() {}
pub fn bar() {}
EOF
$ cat > main2.rs <<EOF
extern crate main1;
fn main() {
main1::bar();
}
EOF
$ rustc --crate-type bin --crate-type lib main1.rs
$ rustc -L. main2.rs
error: linking with `cc` failed: exit status: 1
[...]
= note: /usr/bin/ld: /tmp/crate_bin_lib/libmain1.rlib(main1.main1.707747aa-cgu.0.rcgu.o): in function `main':
main1.707747aa-cgu.0:(.text.main+0x0): multiple definition of `main'; main2.main2.02a148fe-cgu.0.rcgu.o:main2.02a148fe-cgu.0:(.text.main+0x0): first defined here
collect2: error: ld returned 1 exit status
```
1. It captured stdout and not stderr
2. It isn't used anywhere
3. All error messages should go to the DiagnosticOutput instead
4. It modifies thread local state
The only difference between the default and rustc_interface set version
is that the default accesses the source map from SESSION_GLOBALS while
the rustc_interface version accesses the source map from the global
TyCtxt. SESSION_GLOBALS is always set while running the compiler while
the global TyCtxt is not always set. If the global TyCtxt is set, it's
source map is identical to the one in SESSION_GLOBALS
This ensures that it is called even when run_in_thread_pool_with_globals
is avoided and reduces code duplication between the parallel and
non-parallel version of run_in_thread_pool_with_globals
This option introduced in #15820 allows a custom crate to be imported in
the place of std, but with the name std. I don't think there is any
value to this. At most it is confusing users of a driver that uses this option. There are no users of
this option on github. If anyone still needs it, they can emulate it
injecting #![no_core] in addition to their own prelude.
Ensure that queries only return Copy types.
This should pervent the perf footgun of returning a result with an expensive `Clone` impl (like a `Vec` of a hash map).
I went for the stupid solution of allocating on an arena everything that was not `Copy`. Some query results could be made Copy easily, but I did not really investigate.
Delete -Zquery-stats infrastructure
These statistics are computable from the self-profile data and/or ad-hoc collectable as needed, and in the meantime contribute to rustc bootstrap times -- locally, this PR shaves ~2.5% from rustc_query_impl builds in instruction counts.
If this does lose some functionality we want to keep, I think we should migrate it to self-profile (or a similar interface) rather than this ad-hoc reporting.
Store rlink data in opaque binary format on disk
This removes one of the only uses of JSON decoding (to Rust structs) from the compiler, and fixes the FIXME comment. It's not clear to me what the reason for using JSON here originally was, and from what I can tell nothing outside of rustc expects to read the emitted information, so it seems like a reasonable step to move it to the metadata-encoding format (rustc_serialize::opaque).
Mostly intended as a FIXME fix, though potentially a stepping stone to dropping the support for Decodable to be used to decode JSON entirely (allowing for better/faster APIs on the Decoder trait).
cc #64191
These statistics are computable from the self-profile data and/or ad-hoc
collectable as needed, and in the meantime contribute to rustc bootstrap times.
Stabilize `-Z instrument-coverage` as `-C instrument-coverage`
(Tracking issue for `instrument-coverage`: https://github.com/rust-lang/rust/issues/79121)
This PR stabilizes support for instrumentation-based code coverage, previously provided via the `-Z instrument-coverage` option. (Continue supporting `-Z instrument-coverage` for compatibility for now, but show a deprecation warning for it.)
Many, many people have tested this support, and there are numerous reports of it working as expected.
Move the documentation from the unstable book to stable rustc documentation. Update uses and documentation to use the `-C` option.
Addressing questions raised in the tracking issue:
> If/when stabilized, will the compiler flag be updated to -C instrument-coverage? (If so, the -Z variant could also be supported for some time, to ease migrations for existing users and scripts.)
This stabilization PR updates the option to `-C` and keeps the `-Z` variant to ease migration.
> The Rust coverage implementation depends on (and automatically turns on) -Z symbol-mangling-version=v0. Will stabilizing this feature depend on stabilizing v0 symbol-mangling first? If so, what is the current status and timeline?
This stabilization PR depends on https://github.com/rust-lang/rust/pull/90128 , which stabilizes `-C symbol-mangling-version=v0` (but does not change the default symbol-mangling-version).
> The Rust coverage implementation implements the latest version of LLVM's Coverage Mapping Format (version 4), which forces a dependency on LLVM 11 or later. A compiler error is generated if attempting to compile with coverage, and using an older version of LLVM.
Given that LLVM 13 has now been released, requiring LLVM 11 for coverage support seems like a reasonable requirement. If people don't have at least LLVM 11, nothing else breaks; they just can't use coverage support. Given that coverage support currently requires a nightly compiler and LLVM 11 or newer, allowing it on a stable compiler built with LLVM 11 or newer seems like an improvement.
The [tracking issue](https://github.com/rust-lang/rust/issues/79121) and the [issue label A-code-coverage](https://github.com/rust-lang/rust/labels/A-code-coverage) link to a few open issues related to `instrument-coverage`, but none of them seem like showstoppers. All of them seem like improvements and refinements we can make after stabilization.
The original `-Z instrument-coverage` support went through a compiler-team MCP at https://github.com/rust-lang/compiler-team/issues/278 . Based on that, `@pnkfelix` suggested that this needed a stabilization PR and a compiler-team FCP.
Make dead code check a query.
Dead code check is run for each invocation of the compiler, even if no modifications were involved.
This PR makes dead code check a query keyed on the module. This allows to skip the check when a module has not changed.
To perform this, a query `live_symbols_and_ignored_derived_traits` is introduced to encapsulate the global analysis of finding live symbols. The second query `check_mod_deathness` outputs diagnostics for each module based on this first query's results.
Use consistent function parameter order for early context construction and early linting
Rename some functions to make it clear that they do not necessarily work on the whole crate
Improve error message for key="value" cfg arguments.
Hi, I ran into difficulties using the `--cfg` flag syntax, first hit when googling for the error was issue https://github.com/rust-lang/rust/issues/66450. Reading that issue, it sounded like the best way to improve the experience was to improve the error message, this is low risk and doesn't introduce any additional argument parsing.
The issue mentions that it is entirely dependent on the shell, while this may be true, I think guiding the the user into the realization that the quotes may need to be escaped is helpful. The two suggested escapings both work in Bash and in the Windows command prompt.
fyi `@ehuss`
Stabilize `-Z print-link-args` as `--print link-args`
We have stable options for adding linker arguments; we should have a
stable option to help debug linker arguments.
Add documentation for the new option. In the documentation, make it clear that
the *exact* format of the output is not a stable guarantee.
Implement raw-dylib support for windows-gnu
Add support for `#[link(kind = "raw-dylib")]` on windows-gnu targets. Work around binutils's linker's inability to read import libraries produced by LLVM by calling out to the binutils `dlltool` utility to create an import library from a temporary .DEF file; this approach is effectively a slightly refined version of `@mati865's` earlier attempt at this strategy in PR #88801. (In particular, this attempt at this strategy adds support for `#[link_ordinal(...)]` as well.)
In support of #58713.
Replace use of `ty()` on term and use it in more places. This will allow more flexibility in the
future, but slightly worried it allows items which are consts which only accept types.
The produced library would get a main shim too which conflicts with the
main shim of the executable linking the library.
```
$ cat > main1.rs <<EOF
fn main() {}
pub fn bar() {}
EOF
$ cat > main2.rs <<EOF
extern crate main1;
fn main() {
main1::bar();
}
EOF
$ rustc --crate-type bin --crate-type lib main1.rs
$ rustc -L. main2.rs
error: linking with `cc` failed: exit status: 1
[...]
= note: /usr/bin/ld: /tmp/crate_bin_lib/libmain1.rlib(main1.main1.707747aa-cgu.0.rcgu.o): in function `main':
main1.707747aa-cgu.0:(.text.main+0x0): multiple definition of `main'; main2.main2.02a148fe-cgu.0.rcgu.o:main2.02a148fe-cgu.0:(.text.main+0x0): first defined here
collect2: error: ld returned 1 exit status
```
