Disable nrvo mir opt
See #111005 and #110902 . The ICE can definitely be hit on stable, the miscompilation I'm not sure about. The pass makes some pretty sketchy assumptions though, and we should not have it on while that's the case.
I'm not going to work on actually fixing this, it's probably not excessively difficult though.
r? rust-lang/mir-opt
ConstProp into PlaceElem::Index.
Noticed this while looking at keccak output MIR.
This pass aims to replace `ProjectionElem::Index` with `ProjectionElem::ConstantIndex` during ConstProp.
r? `@ghost`
Rename InstCombine to InstSimplify
```
╭ ➜ ben@archlinux:~/rust
╰ ➤ rg -i instcombine
src/doc/rustc-dev-guide/src/mir/optimizations.md
134:may have been misapplied. Examples of this are `InstCombine` and `ConstantPropagation`.
src/ci/docker/host-x86_64/disabled/dist-x86_64-haiku/llvm-config.sh
38: instcombine instrumentation interpreter ipo irreader lanai \
tests/codegen/slice_as_from_ptr_range.rs
4:// min-llvm-version: 15.0 (because this is a relatively new instcombine)
```
r? `@scottmcm`
Reduce MIR dump file count for MIR-opt tests
As referenced in issue #109502 , mir-opt tests previously used the -Zdump-mir=all flag, which generates very large output. This PR only dumps the passes under test, greatly reducing dump output.
Don't validate constants in const propagation
Validation is neither necessary nor desirable.
The constant validation is already omitted at mir-opt-level >= 3, so there there are not changes in MIR test output (the propagation of invalid constants is covered by an existing test in tests/mir-opt/const_prop/invalid_constant.rs).
Make `mem::replace` simpler in codegen
Since they'd mentioned more intrinsics for simplifying stuff recently,
r? `@WaffleLapkin`
This is a continuation of me looking at foundational stuff that ends up with more instructions than it really needs. Specifically I noticed this one because `Range::next` isn't MIR-inlining, and one of the largest parts of it is a `replace::<usize>` that's a good dozen instructions instead of the two it could be.
So this means that `ptr::write` with a `Copy` type no longer generates worse IR than manually dereferencing (well, at least in LLVM -- MIR still has bonus pointer casts), and in doing so means that we're finally down to just the two essential `memcpy`s when emitting `mem::replace` for a large type, rather than the bonus-`alloca` and three `memcpy`s we emitted before this ([or the 6 we currently emit in 1.69 stable](https://rust.godbolt.org/z/67W8on6nP)). That said, LLVM does _usually_ manage to optimize the extra code away. But it's still nice for it not to have to do as much, thanks to (for example) not going through an `alloca` when `replace`ing a primitive like a `usize`.
(This is a new intrinsic, but one that's immediately lowered to existing MIR constructs, so not anything that MIRI or the codegen backends or MIR semantics needs to do work to handle.)
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
1c1c8e442a (diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80)
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
`IntoFuture::into_future` is no longer unstable
We don't need to gate the `IntoFuture::into_future` call in `.await` lowering anymore.
``@bors`` rollup
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Remove the size of locals heuristic in MIR inlining
This heuristic doesn't necessarily correlate to complexity of the MIR Body. In particular, a lot of straight-line code in MIR tends to never reuse a local, even though any optimizer would effectively reuse the storage or just put everything in registers. So it doesn't even necessarily make sense that this would be a stack size heuristic.
So... what happens if we just delete the heuristic? The benchmark suite improves significantly. Less heuristics better?
r? `@cjgillot`
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Deduplicate unreachable blocks, for real this time
In https://github.com/rust-lang/rust/pull/106428 (in particular 41eda69516) we noticed that inlining `unreachable_unchecked` can produce duplicate unreachable blocks. So we improved two MIR optimizations: `SimplifyCfg` was given a simplify to deduplicate unreachable blocks, then `InstCombine` was given a combiner to deduplicate switch targets that point at the same block. The problem is that change doesn't actually work.
Our current pass order is
```
SimplifyCfg (does nothing relevant to this situation)
Inline (produces multiple unreachable blocks)
InstCombine (doesn't do anything here, oops)
SimplifyCfg (produces the duplicate SwitchTargets that InstCombine is looking for)
```
So in here, I have factored out the specific function from `InstCombine` and placed it inside the simplify that produces the case it is looking for. This should ensure that it runs in the scenario it was designed for.
Fixes https://github.com/rust-lang/rust/issues/110551
r? `@cjgillot`
