9830: Enable more assists to generate default trait body impls r=Veykril a=yoshuawuyts
Enable more assists to benefit from trait body generation. Follow-up to #9825 and #9814.
__edit:__ I'd like to move the existing tests to this new file too, but I'll do that in a follow-up PR.
Co-authored-by: Yoshua Wuyts <yoshuawuyts@gmail.com>
From the dawn of time, when dinosaurs roamed the and we didn't have
hierarchical profiling, there was the `latest_requests` infra we used to
track the time of ten last requests.
Today, no one is actually using it and, what's more, it itself became
pretty useless -- LSP grew way more chatty, and 10 requests don't really
paint any kind of picture.
Personally, it's been years since I last looked at latest requests in
the status output.
So, let's remove a tiny bit of state from the big ball of complexity
that is `GlobalState` and `main_loop`!
We generally avoid "syntax only" helper wrappers, which don't do much:
they make code easier to write, but harder to read. They also make
investigations harder, as "find_usages" needs to be invoked both for the
wrapped and unwrapped APIs
9734: semantic highlighting: add reference hlmod r=matklad a=jhgg
This PR adds the "reference" highlight modifier!
I basically went around and looked for `HlMod::Mutable` to find the callsites to add a reference. I think these all make sense!
Co-authored-by: Jake Heinz <jh@discordapp.com>
Co-authored-by: Jake <jh@discordapp.com>
Some features of rust-analyzer requires support for custom commands on
the client side. Specifically, hover & code lens need this.
Stock LSP doesn't have a way for the server to know which client-side
commands are available. For that reason, we historically were just
sending the commands, not worrying whether the client supports then or
not.
That's not really great though, so in this PR we add infrastructure for
the client to explicitly opt-into custom commands, via `extensions`
field of the ClientCapabilities.
To preserve backwards compatability, if the client doesn't set the
field, we assume that it does support all custom commands. In the
future, we'll start treating that case as if the client doesn't support
commands.
So, if you maintain a rust-analyzer client and implement
`rust-analyzer/runSingle` and such, please also advertise this via a
capability.
9693: feat: Add the Hover Range capability which enables showing the type of an expression r=matklad a=alexfertel
Closes https://github.com/rust-analyzer/rust-analyzer/issues/389
This PR extends the `textDocument/hover` method to allow getting the type of an expression. It looks like this:
Edit: One thing I noticed is that when hovering a selection that includes a macro it doesn't work, so maybe this would need a follow-up issue discussing what problem that may have.
(PS: What a great project! I am learning a lot! 🚀)
Co-authored-by: Alexander Gonzalez <alexfertel97@gmail.com>
Co-authored-by: Alexander González <alexfertel97@gmail.com>
9558: Do not erase Cargo diagnostics from the closed documents r=matklad a=SomeoneToIgnore
Fixes https://github.com/rust-analyzer/rust-analyzer/issues/6850
The LSP specification at https://microsoft.github.io/language-server-protocol/specifications/specification-3-14/#textDocument_publishDiagnostics states that
> Diagnostics notification are sent from the server to the client to signal results of validation runs.
>
> Diagnostics are “owned” by the server so it is the server’s responsibility to clear them if necessary. The following rule is used for VS Code servers that generate diagnostics:
>
> * if a language is single file only (for example HTML) then diagnostics are cleared by the server when the file is closed.
> * if a language has a project system (for example C#) diagnostics are not cleared when a file closes. When a project is opened all diagnostics for all files are recomputed (or read from a cache).
>
> When a file changes it is the server’s responsibility to re-compute diagnostics and push them to the client. If the computed set is empty it has to push the empty array to clear former diagnostics. Newly pushed diagnostics always replace previously pushed diagnostics. There is no merging that happens on the client side.
So for projects we should not clear any diagnostics from cargo/json projects.
Our "standalone file" mode is in a way a project too, with sysroot attached and a potential support for dynamic standalone files.
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
9634: minor update to excludeDirs doc r=lnicola a=dae
I saw reference to globs in #7755, but it doesn't look like they're
actually supported, and I had to dig through the source to discover
that the folders are relative to the workspace root. Further digging
was required to get VS Code from hanging for long periods trying to
watch giant Bazel folders that had already been excluded from Rust
Analyzer. Hopefully this tweak will save others the confusion :-)
Co-authored-by: Damien Elmes <gpg@ankiweb.net>
Co-authored-by: Damien Elmes <dae@users.noreply.github.com>
I saw reference to globs in #7755, but it doesn't look like they're
actually supported, and I had to dig through the source to discover
that the folders are relative to the workspace root. Further digging
was required to get VS Code from hanging for long periods trying to
watch giant Bazel folders that had already been excluded from Rust
Analyzer. Hopefully this tweak will save others the confusion :-)
Note that, while we don't currently have a fuzzy-matching score, it
makes sense to special-case postfix templates -- it's very annoying when
`.not()` gets sorted before `.not`. We might want to move this infra to
fuzzy matching, once we have that!
Before this PR, SourceChange used a bool and CompletionItem used an enum
to signify if edit is a snippet. It makes sense to use the same pattern
in both cases. `bool` feels simpler, as there's only one consumer of
this API, and all producers are encapsulated anyway (we check the
capability at the production site).
One source completion can produce up to two lsp completions.
Additionally, `preselct` and `sort_text` are global properties of the
whole set of completions, so the right granularity here is to convert
many completions.
As a side-benefit, we no loger allocate intermediate vec.
Moving tests to `rust-analyzer` crate allows removing walkdir dependency
from `xtask`. It does seem more reasonable to keep tidy tests outside of
the "build system" and closer to other integration tests.
* Keep codegen adjacent to the relevant crates.
* Remove codgen deps from xtask, speeding-up from-source installation.
This regresses the release process a bit, as it now needs to run the
tests (and, by extension, compile the code).
9269: Recreate status page r=lnicola a=Milo123459
I'm working on redesigning the status page.
Co-authored-by: Milo <50248166+Milo123459@users.noreply.github.com>
9380: feat: Implement goto_declaration support r=matklad a=Veykril
This is just a simple implementation that falls back to `goto_definition` for everything but modules where it goes to the actual module declaration if possible.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9348: output to log file if RA_LOG_FILE is defined in environment r=rezural a=rezural
This adds a check for RA_LOG_FILE, and logs to that if defined. It currently overrides flags.log_file. If this is undesirable, I will add a check.
Co-authored-by: rezural <rezural@protonmail.com>
9264: feat: Make documentation on hover configurable r=Veykril a=Veykril
This also implements deprecation support for config options as this renames `hoverActions_linksInHover` to `hover_linksInHover`.
Fixes#9232
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9258: minor: Give `ImportPrefix` variants better config names r=matklad a=Veykril
I feel like `crate` and `self` work better than `by_crate` and `by_self`. The only reason for the current names were that `Self` doesn't work for the variant name on the rust side so I forgot about setting proper config names on serde layer.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9260: tree-wide: make rustdoc links spiky so they are clickable r=matklad a=lf-
Rustdoc was complaining about these while I was running with --document-private-items and I figure they should be fixed.
Co-authored-by: Jade <software@lfcode.ca>
8866: Update salsa r=matklad a=jonas-schievink
This updates salsa to include https://github.com/salsa-rs/salsa/pull/265, and removes all cancellation-related code from rust-analyzer
Co-authored-by: Jonas Schievink <jonasschievink@gmail.com>
The current logic used to transfer global_excludes into vfs exclusions
only transfers global_excludes that are the parent of an item in
dirs.include.
This commit additionally adds an item from global_exclude to the vfs
exclusions if the global_exclude is a child of an included item.
8767: implement range formatting r=matklad a=euclio
Fixes#7580.
This PR implements the `textDocument/rangeFormatting` request using `rustfmt`'s `--file-lines` option.
Still needs some tests. What I want to know is how I should handle the instability of the `--file-lines` option. It's still unstable in rustfmt, so it's only available on nightly, and needs a special flag to enable. Is there a way for `rust-analyzer` to detect if it's using nightly rustfmt, or for users to opt-in?
Co-authored-by: Andy Russell <arussell123@gmail.com>
8942: Add `library` semantic token modifier to items from other crates r=arzg a=arzg
Closes#5772.
A lot of code here is pretty repetitive; please let me know if you have any ideas how to improve it, or whether it’s fine as-is.
Side-note: How can I add tests for this? I don’t see a way for the test Rust code in `test_highlighting` to reference other crates to observe the new behaviour.
Co-authored-by: Aramis Razzaghipour <aramisnoah@gmail.com>
8873: Implement import-granularity guessing r=matklad a=Veykril
This renames our `MergeBehavior` to `ImportGranularity` as rustfmt has it as the purpose of them are basically the same. `ImportGranularity::Preserve` currently has no specific purpose for us as we don't have an organize imports assist yet, so it currently acts the same as `ImportGranularity::Item`.
We now try to guess the import style on a per file basis and fall back to the user granularity setting if the file has no specific style yet or where it is ambiguous. This can be turned off by setting `import.enforceGranularity` to `true`.
Closes https://github.com/rust-analyzer/rust-analyzer/issues/8870
Co-authored-by: Lukas Tobias Wirth <lukastw97@gmail.com>
The new extension allows filtering of workspace symbool lookup
results by search scope or search kind.
Filtering can be configured in 3 different ways:
- The '#' or '*' markers can be added inline with the symbol lookup
query.
The '#' marker means symbols should be looked up in the current
workspace and any dependencies. If not specified, only current
workspace is considered.
The '*' marker means all kinds of symbols should be looked up
(types, functions, etc). If not specified, only type symbols are
returned.
- Each LSP request can take an optional search_scope or search_kind
argument query parameter.
- Finally there are 2 global config options that can be set for all
requests served by the active RA instance.
Add support for setting the global config options to the VSCode
extension.
The extension does not use the per-request way, but it's useful for
other IDEs.
The latest version of VSCode filters out the inline markers, so
currently the only reasonable way to use the new functionality is
via the global config.
8795: Allow semantic tokens for strings to be disabled r=matklad a=djrenren
Fixes https://github.com/rust-analyzer/rust-analyzer/issues/7111
Pretty straightforward change, but open to any suggestions if there's a more recommended testing strategy than what I went with.
Co-authored-by: John Renner <john@jrenner.net>
8674: fix for #8664: Emit folding ranges for multi-line where clauses r=matklad a=m5tfi
#8664
I added a test that assert folding multi-line where clauses while leaving single lined one. Please, let me know if the code needs further improvements.
Co-authored-by: m5tfi <72708423+m5tfi@users.noreply.github.com>
According to the spec we should return ServerNotInitialized if the server is waiting for an initialize request and something else comes in.
Upgrading to lsp-server 0.5.1 will do this and retry until the initialize request comes in.
Fixes#8581
