This commit removes the runtime bookkeeping previously used to ensure
that all Rust tasks were joined before the runtime was shut down.
This functionality will be replaced by an RAII style `Thread` API, that
will also offer a detached mode.
Since this changes the semantics of shutdown, it is a:
[breaking-change]
This commit merges the `rustrt` crate into `std`, undoing part of the
facade. This merger continues the paring down of the runtime system.
Code relying on the public API of `rustrt` will break; some of this API
is now available through `std::rt`, but is likely to change and/or be
removed very soon.
[breaking-change]
As part of the libstd facade efforts, this commit extracts the runtime interface
out of the standard library into a standalone crate, librustrt. This crate will
provide the following services:
* Definition of the rtio interface
* Definition of the Runtime interface
* Implementation of the Task structure
* Implementation of task-local-data
* Implementation of task failure via unwinding via libunwind
* Implementation of runtime initialization and shutdown
* Implementation of thread-local-storage for the local rust Task
Notably, this crate avoids the following services:
* Thread creation and destruction. The crate does not require the knowledge of
an OS threading system, and as a result it seemed best to leave out the
`rt::thread` module from librustrt. The librustrt module does depend on
mutexes, however.
* Implementation of backtraces. There is no inherent requirement for the runtime
to be able to generate backtraces. As will be discussed later, this
functionality continues to live in libstd rather than librustrt.
As usual, a number of architectural changes were required to make this crate
possible. Users of "stable" functionality will not be impacted by this change,
but users of the `std::rt` module will likely note the changes. A list of
architectural changes made is:
* The stdout/stderr handles no longer live directly inside of the `Task`
structure. This is a consequence of librustrt not knowing about `std::io`.
These two handles are now stored inside of task-local-data.
The handles were originally stored inside of the `Task` for perf reasons, and
TLD is not currently as fast as it could be. For comparison, 100k prints goes
from 59ms to 68ms (a 15% slowdown). This appeared to me to be an acceptable
perf loss for the successful extraction of a librustrt crate.
* The `rtio` module was forced to duplicate more functionality of `std::io`. As
the module no longer depends on `std::io`, `rtio` now defines structures such
as socket addresses, addrinfo fiddly bits, etc. The primary change made was
that `rtio` now defines its own `IoError` type. This type is distinct from
`std::io::IoError` in that it does not have an enum for what error occurred,
but rather a platform-specific error code.
The native and green libraries will be updated in later commits for this
change, and the bulk of this effort was put behind updating the two libraries
for this change (with `rtio`).
* Printing a message on task failure (along with the backtrace) continues to
live in libstd, not in librustrt. This is a consequence of the above decision
to move the stdout/stderr handles to TLD rather than inside the `Task` itself.
The unwinding API now supports registration of global callback functions which
will be invoked when a task fails, allowing for libstd to register a function
to print a message and a backtrace.
The API for registering a callback is experimental and unsafe, as the
ramifications of running code on unwinding is pretty hairy.
* The `std::unstable::mutex` module has moved to `std::rt::mutex`.
* The `std::unstable::sync` module has been moved to `std::rt::exclusive` and
the type has been rewritten to not internally have an Arc and to have an RAII
guard structure when locking. Old code should stop using `Exclusive` in favor
of the primitives in `libsync`, but if necessary, old code should port to
`Arc<Exclusive<T>>`.
* The local heap has been stripped down to have fewer debugging options. None of
these were tested, and none of these have been used in a very long time.
[breaking-change]
The compiler was updated to recognize that implementations for ty_uniq(..) are
allowed if the Box lang item is located in the current crate. This enforces the
idea that libcore cannot allocated, and moves all related trait implementations
from libcore to libstd.
This is a breaking change in that the AnyOwnExt trait has moved from the any
module to the owned module. Any previous users of std::any::AnyOwnExt should now
use std::owned::AnyOwnExt instead. This was done because the trait is intended
for Box traits and only Box traits.
[breaking-change]
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.set()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* The `pop` and `set` methods have been combined into one method, `replace`
* The `get_mut` method has been removed. All interior mutability should be done
through `RefCell`.
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.replace()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
These timeouts all follow the same pattern as established by the timeouts on
acceptors. There are three methods: set_timeout, set_read_timeout, and
set_write_timeout. Each of these sets a point in the future after which
operations will time out.
Timeouts with cloned objects are a little trickier. Each object is viewed as
having its own timeout, unaffected by other objects' timeouts. Additionally,
timeouts do not propagate when a stream is cloned or when a cloned stream has
its timeouts modified.
This commit is just the public interface which will be exposed for timeouts, the
implementation will come in later commits.
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
As with the previous commits, the Finally trait is primarily implemented for
closures, so the trait was modified from `&self` to `&mut self`. This will
require that any closure variable invoked with `finally` to be stored in a
mutable slot.
[breaking-change]
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
The various ...Rng::new() methods can hit IO errors from the OSRng they use,
and it seems sensible to expose them at a higher level. Unfortunately, writing
e.g. `StdRng::new().unwrap()` gives a much poorer error message than if it
failed internally, but this is a problem with all `IoResult`s.
This commit deals with the fallout of the previous change by making tuples
structs have public fields where necessary (now that the fields are private by
default).
This commit contains an implementation of synchronous, bounded channels for
Rust. This is an implementation of the proposal made last January [1]. These
channels are built on mutexes, and currently focus on a working implementation
rather than speed. Receivers for sync channels have select() implemented for
them, but there is currently no implementation of select() for sync senders.
Rust will continue to provide both synchronous and asynchronous channels as part
of the standard distribution, there is no intent to remove asynchronous
channels. This flavor of channels is meant to provide an alternative to
asynchronous channels because like green tasks, asynchronous channels are not
appropriate for all situations.
[1] - https://mail.mozilla.org/pipermail/rust-dev/2014-January/007924.html
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
Instead, use an enum to allow running both a procedure and sending the task
result over a channel. I expect the common case to be sending on a channel (e.g.
task::try), so don't require an extra allocation in the common case.
cc #11389
This, the Nth rewrite of channels, is not a rewrite of the core logic behind
channels, but rather their API usage. In the past, we had the distinction
between oneshot, stream, and shared channels, but the most recent rewrite
dropped oneshots in favor of streams and shared channels.
This distinction of stream vs shared has shown that it's not quite what we'd
like either, and this moves the `std::comm` module in the direction of "one
channel to rule them all". There now remains only one Chan and one Port.
This new channel is actually a hybrid oneshot/stream/shared channel under the
hood in order to optimize for the use cases in question. Additionally, this also
reduces the cognitive burden of having to choose between a Chan or a SharedChan
in an API.
My simple benchmarks show no reduction in efficiency over the existing channels
today, and a 3x improvement in the oneshot case. I sadly don't have a
pre-last-rewrite compiler to test out the old old oneshots, but I would imagine
that the performance is comparable, but slightly slower (due to atomic reference
counting).
This commit also brings the bonus bugfix to channels that the pending queue of
messages are all dropped when a Port disappears rather then when both the Port
and the Chan disappear.
Declare a `type SendStr = MaybeOwned<'static>` to ease readibility of
types that needed the old SendStr behavior.
Implement all the traits for MaybeOwned that SendStr used to implement.
* All I/O now returns IoResult<T> = Result<T, IoError>
* All formatting traits now return fmt::Result = IoResult<()>
* The if_ok!() macro was added to libstd
This will allow capturing of common things like logging messages, stdout prints
(using stdio println), and failure messages (printed to stderr). Any new prints
added to libstd should be funneled through these task handles to allow capture
as well.
Additionally, this commit redirects logging back through a `Logger` trait so the
log level can be usefully consumed by an arbitrary logger.
This commit also introduces methods to set the task-local stdout handles:
* std::io::stdio::set_stdout
* std::io::stdio::set_stderr
* std::io::logging::set_logger
These methods all return the previous logger just in case it needs to be used
for inspection.
I plan on using this infrastructure for extra::test soon, but we don't quite
have the primitives that I'd like to use for it, so it doesn't migrate
extra::test at this time.
Closes#6369
This will allow capturing of common things like logging messages, stdout prints
(using stdio println), and failure messages (printed to stderr). Any new prints
added to libstd should be funneled through these task handles to allow capture
as well.
Additionally, this commit redirects logging back through a `Logger` trait so the
log level can be usefully consumed by an arbitrary logger.
This commit also introduces methods to set the task-local stdout handles:
* std::io::stdio::set_stdout
* std::io::stdio::set_stderr
* std::io::logging::set_logger
These methods all return the previous logger just in case it needs to be used
for inspection.
I plan on using this infrastructure for extra::test soon, but we don't quite
have the primitives that I'd like to use for it, so it doesn't migrate
extra::test at this time.
Closes#6369
