This is the first snapshot build by mingw-w64 with the win32 threading model I believe (Closes#13501).
Curiously, this successfully built a snapshot on freebsd when the auto builder is continuously segfaulting. Who knew!
Some of this documentation got a little out of date. There was no mention of a
`SyncSender`, and the entire "Outside the runtime" section isn't really true any
more (or really all that relevant).
This also updates a few other doc blocks and adds some examples.
work started from @gereeter's PR: https://github.com/mozilla/rust/pull/13114
but adjusted bits
```
before
test hash::sip::tests::bench_u64 ... bench: 34 ns/iter (+/- 0)
test hash::sip::tests::bench_str_under_8_bytes ... bench: 37 ns/iter (+/- 1)
test hash::sip::tests::bench_str_of_8_bytes ... bench: 43 ns/iter (+/- 1)
test hash::sip::tests::bench_str_over_8_bytes ... bench: 50 ns/iter (+/- 1)
test hash::sip::tests::bench_long_str ... bench: 613 ns/iter (+/- 14)
test hash::sip::tests::bench_compound_1 ... bench: 114 ns/iter (+/- 11)
after
test hash::sip::tests::bench_u64 ... bench: 25 ns/iter (+/- 0)
test hash::sip::tests::bench_str_under_8_bytes ... bench: 31 ns/iter (+/- 0)
test hash::sip::tests::bench_str_of_8_bytes ... bench: 36 ns/iter (+/- 0)
test hash::sip::tests::bench_str_over_8_bytes ... bench: 40 ns/iter (+/- 0)
test hash::sip::tests::bench_long_str ... bench: 600 ns/iter (+/- 14)
test hash::sip::tests::bench_compound_1 ... bench: 64 ns/iter (+/- 6)
```
Notably it seems smaller keys will hash faster. A long string doesn't see much gains, but compound cuts in half (once compound used a `int` and `u64`).
Exposing ctpop, ctlz, cttz and bswap as taking signed i8/i16/... is just
exposing the internal LLVM names pointlessly (LLVM doesn't have "signed
integers" or "unsigned integers", it just has sized integer types
with (un)signed *operations*).
These operations are semantically working with raw bytes, which the
unsigned types model better.
Some of this documentation got a little out of date. There was no mention of a
`SyncSender`, and the entire "Outside the runtime" section isn't really true any
more (or really all that relevant).
This also updates a few other doc blocks and adds some examples.
Closures did not have their bounds printed at all, nor their lifetimes. Trait
bounds were also printed in angle brackets rather than after a colon with a '+'
inbetween them.
Note that on the current task::spawn [1] documentation page, there is no mention
of a `Send` bound even though it is crucially important!
[1] - http://static.rust-lang.org/doc/master/std/task/fn.task.html
Closures did not have their bounds printed at all, nor their lifetimes. Trait
bounds were also printed in angle brackets rather than after a colon with a '+'
inbetween them.
Note that on the current task::spawn [1] documentation page, there is no mention
of a `Send` bound even though it is crucially important!
[1] - http://static.rust-lang.org/doc/master/std/task/fn.task.html
This fixes two separate issues related to character encoding.
* Add `encode_utf16` to the `Char` trait, analogous to `encode_utf8`. `&str` already supports UTF-16 encoding but only with a heap allocation. Also fix `encode_utf8` docs and add tests.
* Correctly decode non-BMP hex escapes in JSON (#13064).
Previously, all slices derived from a vector whose values were of size 0 had a
null pointer as the 'data' pointer on the slice. This caused first pointer to be
yielded during iteration to always be the null pointer. Due to the null pointer
optimization, this meant that the first return value was None, instead of
Some(&T).
This commit changes slice construction from a Vec instance to use a base pointer
of 1 if the values have zero size. This means that the iterator will never
return null, and the iteration will proceed appropriately.
Closes#13467
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
* `Sender::try_send(t: T) -> bool`
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
* `SyncSender::try_send(t: T) -> TrySendResult<T>`
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
* `SyncSender::send_opt(t: T) -> Option<T>`
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
* `Receiver::try_recv(t: T) -> TryRecvResult<T>`
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
Same representation change performed with path::unix.
This also implements BytesContainer for StrBuf & adds an (unsafe) method
for viewing & mutating the raw byte vector of a StrBuf.
Previously, all slices derived from a vector whose values were of size 0 had a
null pointer as the 'data' pointer on the slice. This caused first pointer to be
yielded during iteration to always be the null pointer. Due to the null pointer
optimization, this meant that the first return value was None, instead of
Some(&T).
This commit changes slice construction from a Vec instance to use a base pointer
of 1 if the values have zero size. This means that the iterator will never
return null, and the iteration will proceed appropriately.
Closes#13467
Add more type signatures to the docs; tweak a few of them.
Someone reading the docs won't know what the types of various things
are, so this adds them in a few meaningful places to help with
comprehension.
cc #13423.
Someone reading the docs won't know what the types of various things
are, so this adds them in a few meaningful places to help with
comprehension.
cc #13423.
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
