Changelog for Clippy 1.77 🏫
Roses are violets,
Red is blue,
Let's create a world,
Perfect for me and you
---
### The cat of this release is: *Luigi*
<img width=500 src="https://github.com/rust-lang/rust-clippy/assets/17087237/ea13d05c-e5ba-4189-9e16-49bf1b43c468" alt="The cats of this Clippy release" />
The cat for the next release can be voted on: [here](https://forms.gle/57gbrNvXtCUmrHYh6)
The cat for the next next release can be nominated in the comments and will be voted in the next changelog PR (Submission deadline is 2024-03-30 23:59CET)
---
changelog: none
Disable `cast_lossless` when casting to u128 from any (u)int type
Fixes https://github.com/rust-lang/rust-clippy/issues/12492
Disables `cast_lossless` when casting to u128 from any int or uint type. The lint states that when casting to any int type, there can potentially be lossy behaviour if the source type ever exceeds the size of the destination type in the future, which is impossible with a destination of u128.
It's possible this is a bit of a niche edge case which is better addressed by just disabling the lint in code, but I personally couldn't think of any good reason to still lint in this specific case - maybe except if the source is a bool, for readability reasons :).
changelog: FP: `cast_lossless`: disable lint when casting to u128 from any (u)int type
Make `assigning_clones` MSRV check more precise
Continuation of #12511
`clone_into` is the only suggestion subject to the 1.63 MSRV requirement, and the lint should still emit other suggestions regardless of the MSRV.
changelog: [assigning_clones]: only apply MSRV check to `clone_into` suggestions.
`assigning_clones` should respect MSRV
Fixes: #12502
This PR fixes the `assigning_clones` lint suggesting to use `clone_from` or `clone_into` on incompatible MSRVs.
`assigning_clones` will suggest using either `clone_from` or `clone_into`, both of which were stabilized in 1.63. If the current MSRV is below 1.63, the lint should not trigger.
changelog: [`assigning_clones`]: don't lint when the MSRV is below 1.63.
Use hir::Node helper methods instead of repeating the same impl multiple times
I wanted to do something entirely different and stumbled upon a bunch of cleanups
[`map_entry`]: call the visitor on the local's `else` block
Fixes#12489
The lint already has all the logic it needs for figuring out if it can or can't suggest a closure if it sees control flow expressions like `break` or `continue`, but it was ignoring the local's else block, which meant that it didn't see the `return None;` in a `let..else`.
changelog: [`map_entry`]: suggest `if let` instead of a closure when `return` expressions exist in the else block of a `let..else`
new restriction lint: `integer_division_remainder_used`
Fixes https://github.com/rust-lang/rust-clippy/issues/12391
Introduces a restriction lint which disallows the use of `/` and `%` operators on any `Int` or `Uint` types (i.e., any that use the default `Div` or `Rem` trait implementations). Custom implementations of these traits are ignored.
----
changelog: Add new restriction lint [`integer_division_remainder_used`]
[`option_option`]: Fix duplicate diagnostics
Relates to #12379
This `option_option` lint change skips checks against `ty`s inside `field_def`s defined by external macro to prevent duplicate diagnostics to the same span `ty` by multiple `Struct` definitions.
---
changelog: [`option_option`]: Fix duplicate diagnostics
move `readonly_write_lock` to perf
[There haven't been any issues](https://github.com/rust-lang/rust-clippy/issues?q=is%3Aissue+readonly_write_lock) since its creation and it's a pretty useful lint I think, so I'd say it's worth giving it a try?
Did a lintcheck run on 300 crates with no results, but I guess `RwLock` is usually not something that's used much in libraries.
changelog: move [`readonly_write_lock`] to perf (now warn-by-default)
fix [`dbg_macro`] FN when dbg is inside some complex macros
fixes: #12131
It appears that [`root_macro_call_first_node`] only detects `println!` in the following example:
```rust
println!("{:?}", dbg!(s));
```
---
changelog: fix [`dbg_macro`] FN when `dbg` is inside some complex macros
(re-opening b'cuz bors doesn't like my previous one)
fix span calculation for non-ascii in `needless_return`
Fixes#12491
Probably fixes#12328 as well, but that one has no reproducer, so 🤷
The bug was that the lint used `rfind()` for finding the byte index of the start of the previous non-whitespace character:
```
// abc\n return;
^
```
... then subtracting one to get the byte index of the actual whitespace (the `\n` here).
(Subtracting instead of adding because it treats this as the length from the `return` token to the `\n`)
That's correct for ascii, like here, and will get us to the `\n`, however for non ascii, the `c` could be multiple bytes wide, which would put us in the middle of a codepoint if we simply subtract 1 and is what caused the ICE.
There's probably a lot of ways we could fix this.
This PR changes it to iterate backwards using bytes instead of characters, so that when `rposition()` finally finds a non-whitespace byte, we *know* that we've skipped exactly 1 byte. This was *probably*(?) what the code was intending to do
changelog: Fix ICE in [`needless_return`] when previous line end in a non-ascii character
hir: Remove `opt_local_def_id_to_hir_id` and `opt_hir_node_by_def_id`
Also replace a few `hir_node()` calls with `hir_node_by_def_id()`.
Follow up to https://github.com/rust-lang/rust/pull/120943.
[`unused_enumerate_index`]: trigger on method calls
The lint used to check for patterns looking like:
```rs
for (_, x) in some_iter.enumerate() {
// Index is ignored
}
```
This commit further checks for chained method calls constructs where we
can detect that the index is unused. Currently, this checks only for the
following patterns:
```rs
some_iter.enumerate().map_function(|(_, x)| ..)
let x = some_iter.enumerate();
x.map_function(|(_, x)| ..)
```
where `map_function` is one of `all`, `any`, `filter_map`, `find_map`,
`flat_map`, `for_each` or `map`.
Fixes#12411.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: [`unused_enumerate_index`]: add detection for method chains such as `iter.enumerate().map(|(_, x)| x)`
Prior to this change, it might be that the lint would remove an explicit
type that was necessary for the type system to keep track of types.
This should be the last change that prevented this lint to be machine
applicable.
Don't emit `doc_markdown` lint for missing backticks if it's inside a quote
Fixes#10262.
changelog: Don't emit `doc_markdown` lint for missing backticks if it's inside a quote
[`use_self`]: Make it aware of lifetimes
Have the lint trigger even if `Self` has generic lifetime parameters.
```rs
impl<'a> Foo<'a> {
type Item = Foo<'a>; // Can be replaced with Self
fn new() -> Self {
Foo { // No lifetime, but they are inferred to be that of Self
// Can be replaced as well
...
}
}
// Don't replace `Foo<'b>`, the lifetime is different!
fn eq<'b>(self, other: Foo<'b>) -> bool {
..
}
```
Fixes#12381
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: [`use_self`]: Have the lint trigger even if `Self` has generic lifetime parameters
CI: replace `cancel-outdated-builds` with `concurrency` group
This is the last remaining [usage](https://github.com/search?q=org%3Arust-lang%20cancel-outdated-builds&type=code) of the [cancel-outdated-builds](https://github.com/rust-lang/simpleinfra/tree/master/github-actions/cancel-outdated-builds) CI action. Which means that if we remove its usage, we can remove the code of the action :)
This action was replaced in `rust-lang/rust` with the native Github Actions `concurrency` group [last year](https://github.com/rust-lang/rust/pull/112955).
Note that unlike `rust-lang/rust`, which explicitly allows parallel try builds, `clippy` did not allow them, as all steps of the `clippy_bors.yaml` workflow used the `cancel-outdated-builds` action, regardless of the branch. So the new `concurrency` group mirrors that, which makes it a bit simpler than on `rust-lang/rust`.
changelog: none
r? `@Mark-Simulacrum`
Handle false positive with `map_clone` lint
### Summary
- Fixes https://github.com/rust-lang/rust-clippy/issues/12271
- (This is my first contribution to clippy and any suggestion would be appreciated)
changelog: [`map_clone`]: Handle false positive with `map_clone` lint
