Right now we'll end up globbing them into the accepted targets and (ever worse) they will override the make variables of real target files because we `include`d everything in that directory.
As a side effect, editors get a better hint on file types.
Fixies #11671
This commit changes default relative libdir 'lib' to a relative libdir calculated using LIBDIR provided by --libdir configuration option. In case if no option was provided behavior does not change.
We have a default value for this ('/usr/local'), so this warning is
printed ALL the time unless one does --enable-local-rust. As a result,
it doesn't really help at all.
not in hardcoded libdir path. If there was no LIBDIR provided
during configuration fallback to hardcoded paths.
Thanks to Jan Niklas Hasse for solution and to Alex Crichton for improvements.
Closes#11671
Removes all target-specific knowledge from rustc. Some targets have changed
during this, but none of these should be very visible outside of
cross-compilation. The changes make our targets more consistent.
iX86-unknown-linux-gnu is now only available as i686-unknown-linux-gnu. We
used to accept any value of X greater than 1. i686 was released in 1995, and
should encompass the bare minimum of what Rust supports on x86 CPUs.
The only two windows targets are now i686-pc-windows-gnu and
x86_64-pc-windows-gnu.
The iOS target has been renamed from arm-apple-ios to arm-apple-darwin.
A complete list of the targets we accept now:
arm-apple-darwin
arm-linux-androideabi
arm-unknown-linux-gnueabi
arm-unknown-linux-gnueabihf
i686-apple-darwin
i686-pc-windows-gnu
i686-unknown-freebsd
i686-unknown-linux-gnu
mips-unknown-linux-gnu
mipsel-unknown-linux-gnu
x86_64-apple-darwin
x86_64-unknown-freebsd
x86_64-unknown-linux-gnu
x86_64-pc-windows-gnu
Closes#16093
[breaking-change]
Used aforementioned variants to extract options that have explicit
`putvar` calls associated with them in the subsequent code. When the
explicit `putvar` call was conditional on some potentially complex
condition, moved the `putvar` call out to the main control flow of the
script so that it always runs if necessary.
----
As a driveby fix, captured the error exit when doing the test run of
`rustc --version` from `CFG_LOCAL_RUST_ROOT`, and signal explicit
configure failure when it did not run successfully. (If we cannot run
`rustc`, we really shouldn't try to keep going.)
----
Finally, in response to review feedback, went through and identified
cases where we had been calling `putvar` manually (and thus my naive
translation used `opt_nosave`/`valopt_nosave`), and then verified
whether a manual `putvar` was necessary (i.e., was each variable in
question manually computed somewhere in the `configure` script).
In cases that did not meet this criteria, I revised the code to use
the `opt`/`valopt` directly and removed the corresponding `putvar`,
cleaning things up a teeny bit.
----
Fix#17887.
This commit removes the libuv and gyp submodules, as well as all build
infrastructure related to them.
For more context, see the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230)
[breaking-change]
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
In line with what @brson, @cmr, @nikomatsakis and I discussed this morning, my
redux of the tutorial will be implemented as the Guide. This way, I can work in
small iterations, rather than dropping a huge PR, which is hard to review. In
addition, the community can observe my work as I'm doing it.
This adds a note in line with [this comment][reddit] that clarifies the state
of the tutorial, and the community's involvement with it.
[reddit]: http://www.reddit.com/r/rust/comments/28bew8/rusts_documentation_is_about_to_drastically/ci9c98k
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
Rust no longer has support for JIT compilation, so it doesn't currently
require a PaX MPROTECT exception. The extended attributes are preferred
over modifying the binaries so it's not actually going to work on most
systems like this anyway.
If JIT compilation ends up being supported again, it should handle this
by *always* applying the exception via an extended attribute without
performing auto-detection of PaX on the host. The `paxctl` tool is only
necessary with the older method involving modifying the ELF binary.
This adds a new configure option, --jemalloc-root, which will specify a location
at which libjemalloc_pic.a must live. This library is then used for the build
triple as the jemalloc library to link.
This was required to get ./configure to work on my armv7 test machine.
I haven't found anything sane to feature gate `hf` on that's pokable from the context of the configure script.
It also seems that gcc doesn't work on armv7 by default (rust wants to pass it `-m32` which isn't supported), would it be preferential to make the default `--enable-clang` on arm, or remove the `-m32` flag on that platform?
I mostly tried to remain backwards compatible with old invocations of
the `configure` script; if you do not want to use `CC` et al., you
should not have to; you can keep using `--enable-clang` and/or
`--enable-ccache`.
The overall intention is to capture the following precedences for
guessing the C compiler:
1. Value of `CC` at make invocation time.
2. Value of `CC` at configure invocation time.
3. Compiler inferred at configure invocation time (`gcc` or `clang`).
The strategy is to check (at `configure` time) if each of the
environment variables is set, and if so, save its value in a
corresponding `CFG_` variable (e.g. `CFG_CC`).
Then, in the makefiles, if `CC` is not set but `CFG_CC` is, then we
use the `CFG_CC` setting as `CC`.
Also, I fold the potential user-provided `CFLAGS` and `CXXFLAGS`
values into all of the per-platform `CFLAGS` and `CXXFLAGS` settings.
(This was opposed to adding `$(CFLAGS)` in an ad-hoc manner to various
parts of the mk files.)
Fix#13805.
----
Note that if you try to set the compiler to clang via the `CC` and
`CXX` environment variables, you will probably need to also set
`CXXFLAGS` to `--enable-libcpp` so that LLVM will be configured
properly.
----
Introduce CFG_USING_CLANG, which is distinguished from
CFG_ENABLE_CLANG because the former represents "we think we're using
clang, choose appropriate warning-control options" while the latter
represents "we asked configure (or the host required) that we attempt
to use clang, so check that we have an appropriate version of clang."
The main reason I added this is that I wanted to allow the user to
choose clang via setting the `CC` environment variable, but I did not
want that method of selection to get confused with the user passing
the `--enable-clang` option.
----
A digression: The `configure` script does not infer the compiler
setting if `CC` is set; but if `--enable-clang` was passed, then it
*does* still attempt to validate that the clang version is compatible.
Supporting this required revising `CLANG_VERSION` check to be robust
in face of user-provided `CC` value.
In particular, on Travis, the `CC` is set to `gcc` and so the natural
thing to do is to attempt to use `gcc` as the compiler, but Travis is
also passing `--enable-clang` to configure. So, what is the right
answer in the face of these contradictory requests?
One approach would be to have `--enable-clang` supersede the setting
for `CC` (and instead just call whatever we inferred for `CFG_CLANG`).
That sounds maximally inflexible to me (pnkfelix): a developer
requesting a `CC` value probably wants it respected, and should be
able to set it to something else; it is harder for that developer to
hack our configure script to change its inferred path to clang.
A second approach would be to blindly use the `CC` value but keep
going through the clang version check when `--enable-clang` is turned
on. But on Travis (a Linux host), the `gcc` invocation won't print a
clang version, so we would not get past the CLANG_VERSION check in
that context.
A third approach would be to never run the CLANG_VERSION check if `CC`
is explicitly set. That is not a terrible idea; but if the user uses
`CC` to pass in a path to some other version of clang that they want
to test, probably should still send that through the `CLANG_VERSION`
check.
So in the end I (pnkfelix) took a fourth approach: do the
CLANG_VERSION check if `CC` is unset *or* if `CC` is set to a string
ending with `clang`. This way setting `CC` to things like
`path/to/clang` or `ccache clang` will still go through the
CLANG_VERSION check, while setting `CC` to `gcc` or some unknown
compiler will skip the CLANG_VERSION check (regardless of whether the
user passed --enable-clang to `configure`).
----
Drive-by fixes:
* The call that sets `CFG_CLANG_VERSION` was quoting `"$CFG_CC"` in
its invocation, but that does not play nicely with someone who sets
`$CFG_CC` to e.g. `ccache clang`, since you do not want to intepret
that whole string as a command.
(On the other hand, a path with spaces might need the quoted
invocation. Not sure which one of these corner use-cases is more
important to support.)
* Fix chk_cc error message to point user at `gcc` not `cc`.
This adds a `std::rt::heap` module with a nice allocator API. It's a
step towards fixing #13094 and is a starting point for working on a
generic allocator trait.
The revision used for the jemalloc submodule is the stable 3.6.0 release.
Closes#11807
Compile-fail tests for syntax extensions belong in this suite which has correct
dependencies on all artifacts rather than just the target artifacts.
Closes#13818
The goal of the snapshot bots is to produce binaries which can run in as many
locations as possible. Currently we build on Centos 6 for this reason, but with
LLVM's update to C++11, this reduces the number of platforms that we could
possibly run on.
This adds a --enable-llvm-static-stdcpp option to the ./configure script for
Rust which will enable building a librustc with a static dependence on
libstdc++. This normally isn't necessary, but this option can be used on the
snapshot builders in order to continue to make binaries which should be able to
run in as many locations as possible.
OSX often has a more recent version of clang than it does for GCC. When an older
version of gcc is detected on OSX, the --enable-clang flag is implicitly
enabled.
When clang is enabled, also pass through --enable-libcpp to LLVM's configure
command line to help it pick up the most recent c++ runtime library. This also
changes the mklldeps.py script to pick up on whether LLVM was linked against
stdc++ or c++ based on the --cxxflags that llvm-config prints.
In an ongoing attempt to update LLVM, the bots need to update their C compilers
to something that supports c++11 (LLVM recently switched). The OSX bots are
running Lion (10.7), which only supports up to gcc 4.2 and clang 3.2. Apparently
the libstdc++ is too old (even on the most updated command line tools) for LLVM,
but using libc++ instead appears to work just fine.
This comes with a number of fixes to be compatible with upstream LLVM:
* Previously all monomorphizations of "mem::size_of()" would receive the same
symbol. In the past LLVM would silently rename duplicated symbols, but it
appears to now be dropping the duplicate symbols and functions now. The symbol
names of monomorphized functions are now no longer solely based on the type of
the function, but rather the type and the unique hash for the
monomorphization.
* Split stacks are no longer a global feature controlled by a flag in LLVM.
Instead, they are opt-in on a per-function basis through a function attribute.
The rust #[no_split_stack] attribute will disable this, otherwise all
functions have #[split_stack] attached to them.
* The compare and swap instruction now takes two atomic orderings, one for the
successful case and one for the failure case. LLVM internally has an
implementation of calculating the appropriate failure ordering given a
particular success ordering (previously only a success ordering was
specified), and I copied that into the intrinsic translation so the failure
ordering isn't supplied on a source level for now.
* Minor tweaks to LLVM's API in terms of debuginfo, naming, c++11 conventions,
etc.
The previous regex was a bit to strict, rejecting versions such as 3.4.1 which
is apparently the version which travis is currently installing, causing all
travis builds to fail.
MSYS2 supports `MINGW64` system for 64-bit environment. It sets
`MSYSTEM=MINGW64` environment variable, which changes output of
`uname -s` thus affects `configure` behavior.
This patch adds `MINGW64*` support for `configure`.
- remove `node.js` dep., it has no effect as of #12747 (1)
- switch between LaTeX compilers, some cleanups
- CSS: fixup the print stylesheet, refactor highlighting code (2)
(1): `prep.js` outputs its own HTML directives, which `pandoc` cannot recognize when converting the document into LaTeX (this is why the PDF docs have never been highlighted as of now).
Note that if we were to add the `.rust` class to snippets, we could probably use pandoc's native highlighting capatibilities i.e. Kate ([here is](http://adrientetar.github.io/rust-tuts/tutorial/tutorial.pdf) an example of that).
(2): the only real highlighting change is for lifetimes which are now brown instead of red, the rest is just refactor of twos shades of red that look the same.
Also I made numbers highlighting for src in rustdoc a tint more clear so that it is less bothering.
@alexcrichton, @huonw
Closes#9873. Closes#12788.
`prep.js` outputs its own HTML directives, which `pandoc` cannot
recognize when converting the document into LaTeX (this is why the
PDF docs have never been highlighted as of now).
Note that if we were to add the `.rust` class to snippets, we could
probably use pandoc's native highlighting capatibilities i.e. Kate.
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
cc #5219
This reorganizes the documentation index to be more focused on the in-tree docs, and to clean up the style, and it also adds @steveklabnik's pointer guide.
Ensure configure creates doc/guides directory
Fix configure makefile and tests
Remove old guides dir and configure option, convert testing to guide
Remove ignored files
Fix submodule issue
prepend dir in makefile so that bor knows how to build the docs
S to uppercase
llvm supports both win32 native threads and pthread,
but configure tries to find pthread first.
This manually disables pthread to use native api.
This removes libpthreads-2.dll dependency on librustc.
Apple replaced gcc with clang, but kept around a stub gcc to call
clang. This adds a check in `configure` to detect when gcc is
really clang, and switch to using clang in this situation.
Closes#10811.
CFG_BUILD_DIR, CFG_LLVM_SRC_DIR and CFG_SRC_DIR all have trailing
slashes, by definition, so this is correct.
(This is purely cosmetic; the doubled slash is ignored by all the tools we're using.)
This commit implements the support necessary for generating both intermediate
and result static rust libraries. This is an implementation of my thoughts in
https://mail.mozilla.org/pipermail/rust-dev/2013-November/006686.html.
When compiling a library, we still retain the "lib" option, although now there
are "rlib", "staticlib", and "dylib" as options for crate_type (and these are
stackable). The idea of "lib" is to generate the "compiler default" instead of
having too choose (although all are interchangeable). For now I have left the
"complier default" to be a dynamic library for size reasons.
Of the rust libraries, lib{std,extra,rustuv} will bootstrap with an
rlib/dylib pair, but lib{rustc,syntax,rustdoc,rustpkg} will only be built as a
dynamic object. I chose this for size reasons, but also because you're probably
not going to be embedding the rustc compiler anywhere any time soon.
Other than the options outlined above, there are a few defaults/preferences that
are now opinionated in the compiler:
* If both a .dylib and .rlib are found for a rust library, the compiler will
prefer the .rlib variant. This is overridable via the -Z prefer-dynamic option
* If generating a "lib", the compiler will generate a dynamic library. This is
overridable by explicitly saying what flavor you'd like (rlib, staticlib,
dylib).
* If no options are passed to the command line, and no crate_type is found in
the destination crate, then an executable is generated
With this change, you can successfully build a rust program with 0 dynamic
dependencies on rust libraries. There is still a dynamic dependency on
librustrt, but I plan on removing that in a subsequent commit.
This change includes no tests just yet. Our current testing
infrastructure/harnesses aren't very amenable to doing flavorful things with
linking, so I'm planning on adding a new mode of testing which I believe belongs
as a separate commit.
Closes#552
Earlier versions of pandoc don't have the `default.html5` template file. When `make docs` is run, the build process fails with this message.
pandoc: doc/rust.html
pandoc: /usr/share/pandoc-1.8.2.1/templates/default.html5: openFile: does not exist (No such file or directory)
node.js:201
throw e; // process.nextTick error, or 'error' event on first tick
^
Error: write EPIPE
at errnoException (net.js:670:11)
at Object.afterWrite [as oncomplete] (net.js:503:19)
make: *** [doc/rust.html] Error 1
Previously we were actually overwriting `CFG_{HOST,TARGET,BUILD}` with `CFG_{HOST,TARGET,BUILD}_TRIPLE(S)` since configure tested for the legacy one by checking if it was empty which would never be the case. That meant it wouldn't split up multiple triples and just treat it as one long triple.
This pull also fixes the rules that were changed when librustuv was added to use the right CFG_ vars and removes the legacy flags.
As discovered in #9925, it turns out that we weren't using jemalloc on most
platforms. Additionally, on some platforms we were using it incorrectly and
mismatching the libc version of malloc with the jemalloc version of malloc.
Additionally, it's not clear that using jemalloc is indeed a large performance
win in particular situtations. This could be due to building jemalloc
incorrectly, or possibly due to using jemalloc incorrectly, but it is unclear at
this time.
Until jemalloc can be confirmed to integrate correctly on all platforms and has
verifiable large performance wins on platforms as well, it shouldn't be part of
the default build process. It should still be available for use via the
LD_PRELOAD trick on various architectures, but using it as the default allocator
for everything would require guaranteeing that it works in all situtations,
which it currently doesn't.
Closes#9925
Many people will be very confused that their debug! statements aren't working
when they first use rust only to learn that they should have been building with
`--cfg debug` the entire time. This inverts the meaning of the flag to instead
of enabling debug statements, now it disables debug statements.
This way the default behavior is a bit more reasonable, and requires less
end-user configuration. Furthermore, this turns on debug by default when
building the rustc compiler.
Builds are considerably faster without assertions, so when working on
e.g. libstd, which doesn't directly interact with LLVM, one might want
to disable them.
Closes#3816.
Without --quiet, git shows its own progress report of download. It's not really a progress bar, but it's a percentage and files incoming. This will help initial downloads of LLVM to not cause people to wonder why their configure script is hanging for hours.
r? @graydon
When no arguments are given, echo prints a blank line. These two are
equivalent:
$ echo ""
$ echo
Replace the former by the latter.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Fix#6805: add --enable-ccache configure option to prefix compiler invocations with `ccache` to attempt to reuse common results, e.g. for LLVM (re)builds.
The information at developer [Note-ccache](../../wiki/Note-ccache) and at [ccache and clang concerns](http://petereisentraut.blogspot.fr/2011/09/ccache-and-clang-part-2.html) were what drove my introduction of the `-Qunused-arguments` and `CCACHE_CPP2` options. (Though I did confirm first-hand that at least the first really is necessary.)
Yes, one certainly can re-route how `gcc` and `clang` are resolved in one's PATH and use that as a way to invoke `ccache`. But I personally do not want to introduce that change to my own PATH, and this seems like a small enough change that it does not hurt to add it, at least for now. (I don't know what form it would take when we move over to `rustpkg`.)
Apple Clang uses different version numbering than "regular" clang, but
it also provides the "regular" version it's based on. Update the sed
pattern to pull out this "regular" version number instead of the Apple
version number.
This lets us use #ifdefs to determine which stage of the build we happen
to be in, which is useful in the event we need to make changes to rustrt
that are incompatible with the code generated by stage0.
This should help pave the way to completing #6575, which will likely
require changes to type signatures for spawn_fn & glue_fn in rustrt.
* They didn't work before, because the location of the tests caused the
'sysroot' option to crate lookup to be wrong for finding the correct stage's
core/std libraries. This moves the compiled tests from the $host/test
directory into a $host/$stage/test directory. This means that the sysroot will
be correct and the core/std libraries can actually be found
* The LLVM bindings apparently aren't threadsafe, so we can't run multiple tests
in parallel.
Removing it from the tree is an ordeal and there is no official way
to disable clang via LLVM's Makefiles so this edits the Makefile
in llvm/tools after running configure.
Previously the build system only checked for llvm-3.1 - 2.8.
Now also 3.2 and 3.2svn is accepted.
Signed-off-by: Fabian Deutsch <fabian.deutsch@gmx.de>
Previously the build system only checked for llvm-3.1 - 2.8.
Now also 3.2 and 3.2svn is accepted.
Signed-off-by: Fabian Deutsch <fabian.deutsch@gmx.de>
In order to mitigate typo of target-triples, error notification of unsupported target triples which defined in mk/platform.mk added.
minor fix for arm-linux-androideabi added.
- thanks to work in libuv's upstream, we can call libuv's Makefile directly
with parameters, instead of descending in gyp-uv madness and generating
our own.
Ubuntu's clang packages have additional information appended to the end of
the version.
- Building Rust v0.5 with clang v3.0-6ubuntu3 fails.
- Building Rust v0.5 and incoming with clang v3.1-5ppa (backported from Debian)
works.
Closes#4441.
This addresses issue #2720. According to LLVM's documentation, it requires a
version of Python between 2.4 and 2.7. Without the proper version, LLVM fails
to build with cryptic errors. Prior to this commit, the configure script
checked for the `python` command in the environment, but didn't actually check
the version, which can cause problems e.g. on Linux distros where the default
is Python 3. Now the configure script always prefers to select a more specific
version of Python when available, in the order `python2.7` > `python2.6` >
`python2` > `python`, and will always check to ensure that the interpreter's
version is in the correct range.
rather than the snapshots.
make sure to get all of the files.
update to add nmatsakis' requested feature of pointing to a
different rustc install root.
usage: --enable-local-rust to enable
--local-rust-root="/path/to/rustc/" to change the path, which defaults to
"/usr/local/"
Tested on OS X and Linux, likely broken on windows.
When CFG_ENABLE_DEBUG is defined it will call rustc with -g --cfg=debug
and cc with -DRUST_DEBUG. Otherwise it calls rustc with --cfg=ndebug and cc
with -DRUST_NDEBUG.
I plan to use this for a few things in the runtime.
Linux perf tool version 3.2 introduced a new option "--log-fd" defaults
to 0, which leads to error "Failed opening logfd: Illegal argument" when
executing perf tests.
Set logfd to stderr to let perf test work.
Issue #1538
Naturaldocs isn't really that great but it seems easier to get
something working than with doxygen, for which we would need to
convert rust code to something C++ish. We probably want to just
write a rustdoc utility at some point.
On my machine I have two LLVM builds, one of regular HEAD and one
for Rust in ~/rust-llvm - by default CFG_LLVM_CONFIG is set to
/usr/local/bin/llvm-config which is wrong, because the probe for it
initially happens earlier in configure and succeeds (so putvar is called.)
This causes it to be emitted twice into the Makefile but the second
instance wins.
This splits mk/stageN.mk into host.mk and target.mk and makes
the build rules somewhat simpler - there's no more building from stageN
into stageN+1; instead we always build from stageN(host) to
stageN(target) then promote from stageN(target) to stageN+1(host).
Add a big honkin explaination right at the top of Makefile.in
This patch changes libuv's gyp build system to
make it's own makefiles. To generate them for rust,
run these commands. They requires python 2.x to
work:
$ mkdir -p src/rt/libuv/build
$ svn co http://gyp.googlecode.com/svn src/rt/libuv/build/gyp
$ ./etc/src/gyp_uv
Add a new src/test/pretty directory to hold just source files for testing the
pretty-printer.
Add a new pp-exact directive. When this directive is followed by a file name
it specifies a file containing the output that the pretty-printer should
generate. When pp-exact is not followed by a filename it says that the file
should pretty-print as written.
This replaces the make-based test runner with a set of Rust-based test
runners. I believe that all existing functionality has been
preserved. The primary objective is to dogfood the Rust test
framework.
A few main things happen here:
1) The run-pass/lib-* tests are all moved into src/test/stdtest. This
is a standalone test crate intended for all standard library tests. It
compiles to build/test/stdtest.stageN.
2) rustc now compiles into yet another build artifact, this one a test
runner that runs any tests contained directly in the rustc crate. This
allows much more fine-grained unit testing of the compiler. It
compiles to build/test/rustctest.stageN.
3) There is a new custom test runner crate at src/test/compiletest
that reproduces all the functionality for running the compile-fail,
run-fail, run-pass and bench tests while integrating with Rust's test
framework. It compiles to build/test/compiletest.stageN.
4) The build rules have been completely changed to use the new test
runners, while also being less redundant, following the example of the
recent stageN.mk rewrite.
It adds two new features to the cfail/rfail/rpass/bench tests:
1) Tests can specify multiple 'error-pattern' directives which must be
satisfied in order.
2) Tests can specify a 'compile-flags' directive which will make the
test runner provide additional command line arguments to rustc.
There are some downsides, the primary being that Rust has to be
functioning pretty well just to run _any_ tests, which I imagine will
be the source of some frustration when the entire test suite
breaks. Will also cause some headaches during porting.
Not having individual make rules, each rpass, etc test no longer
remembers between runs whether it completed successfully. As a result,
it's not possible to incrementally fix multiple tests by just running
'make check', fixing a test, and repeating without re-running all the
tests contained in the test runner. Instead you can filter just the
tests you want to run by using the TESTNAME environment variable.
This also dispenses with the ability to run stage0 tests, but they
tended to be broken more often than not anyway.
This will link to std and compile with the --test flag. Eventually the
run-pass/lib* tests will move here.
We could also put the std tests directly into the library and compile both a
library version and a test version, but I think this way will make for faster
builds.
Issue #428
On some platform (OS X), llvm needs macros like
__STDC_LIMIT_MACROS defined in order to work, which is
normally defined in llvm-config. This patch modifies
the config to use CFG_LLVM_ROOT's llvm-config if it
exists, which fixes the compile failures.
Since moving to a downloadable snapshot for stage0, it's been
possible to complete the build without compiling code written
in ocaml. However, the configure script still required it to
be present.
This commit changes detection failure to a non-fatal condition,
allowing the build to complete on systems without an ocaml
compiler.
An info message is also made conditional.
