Add hotness data to LLVM remarks
Slight improvement of https://github.com/rust-lang/rust/pull/113040. This makes sure that if PGO is used, remarks generated using `-Zremark-dir` will include the `Hotness` attribute.
r? `@tmiasko`
The code fails to parse with `nightly-2021-02-05`:
$ cargo +nightly-2021-02-05 build
error: generic associated types in trait paths are currently not implemented
--> src/main.rs:9:42
|
9 | fn _bar<T: for<'a> StreamingIterator<Item<'a> = &'a [i32]>>(_iter: T) { /* ... */
| ^^^^
but parses with `nightly-2021-02-06`:
$ cargo +nightly-2021-02-06 build
warning: the feature `generic_associated_types` is incomplete and may not be safe to use and/or cause compiler crashes
warning: 1 warning emitted
because it was (with high probability) fixed by PR 79554 which was merged
within that nightly range.
Make module inner and function run_analysis_to_runtime_passes in
rustc_mir_transform public to allow re-implementing the query from the
rust compiler interface.
Map RPIT duplicated lifetimes back to fn captured lifetimes
Use the [`lifetime_mapping`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_hir/hir/struct.OpaqueTy.html#structfield.lifetime_mapping) to map an RPIT's captured lifetimes back to the early- or late-bound lifetimes from its parent function. We may be going thru several layers of mapping, since opaques can be nested, so we introduce `TyCtxt::map_rpit_lifetime_to_fn_lifetime` to loop through several opaques worth of mapping, and handle turning it into a `ty::Region` as well.
We can then use this instead of the identity substs for RPITs in `check_opaque_meets_bounds` to address #114285.
We can then also use `map_rpit_lifetime_to_fn_lifetime` to properly install bidirectional-outlives predicates for both RPITs and RPITITs. This addresses #114601.
I based this on #114574, but I don't actually know how much of that PR we still need, so some code may be redundant now... 🤷
---
Fixes#114597Fixes#114579Fixes#114285
Also fixes#114601, since it turns out we had other bugs with RPITITs and their duplicated lifetime params 😅.
Supersedes #114574
r? `@oli-obk`
[rustc_data_structures][base_n][perf] Remove unnecessary utf8 check.
Since all output characters taken from `BASE_64` are valid UTF8 chars there is no need to waste cycles on validation.
Even though it's obviously a perf win, I've also used a [benchmark](https://gist.github.com/ttsugriy/e1e63c07927d8f31e71695a9c617bbf3) on M1 MacBook Air with following results:
```
Running benches/base_n_benchmark.rs (target/release/deps/base_n_benchmark-825fe5895b5c2693)
push_str/old time: [14.670 µs 14.852 µs 15.074 µs]
Found 11 outliers among 100 measurements (11.00%)
4 (4.00%) high mild
7 (7.00%) high severe
push_str/new time: [12.573 µs 12.674 µs 12.801 µs]
Found 11 outliers among 100 measurements (11.00%)
7 (7.00%) high mild
4 (4.00%) high severe
```
rustc_interface: Dismantle `register_plugins` query
It did three independent things:
- Constructed `LintStore`
- Prepared incremental directories and dep graph
- Initialized some fields in `Session`
The `LintStore` construction (now `passes::create_lint_store`) is more or less left in place.
The incremental stuff is now moved into `fn dep_graph_future`.
This helps us to start loading the dep graph a bit earlier.
The `Session` field initialization is moved to tcx construction point.
Now that tcx is constructed early these fields don't even need to live in `Session`, they can live in tcx instead and be initialized at its creation (see the FIXME).
Three previously existing `rustc_interface` queries are de-querified (`register_plugins`, `dep_graph_future`, `dep_graph`) because they are only used locally in `fn global_ctxt` and their results don't need to be saved elsewhere.
On the other hand, `crate_types` and `stable_crate_id` are querified.
They are used from different places and their use is very similar to the existing `crate_name` query in this regard.
Rollup of 7 pull requests
Successful merges:
- #114376 (Avoid exporting __rust_alloc_error_handler_should_panic more than once.)
- #114413 (Warn when #[macro_export] is applied on decl macros)
- #114497 (Revert #98333 "Re-enable atomic loads and stores for all RISC-V targets")
- #114500 (Remove arm crypto target feature)
- #114566 (Store the laziness of type aliases in their `DefKind`)
- #114594 (Structurally normalize weak and inherent in new solver)
- #114596 (Rename method in `opt-dist`)
r? `@ghost`
`@rustbot` modify labels: rollup
Rename method in `opt-dist`
This makes it clearer that the LLVM is the host one (it doesn't necessarily have to be downloaded). On Linux, it comes from the Dockerfile, on Windows it's downloaded.
Suggested here: https://github.com/rust-lang/rust/pull/114344#discussion_r1285596217
r? `@lqd`
Structurally normalize weak and inherent in new solver
It seems pretty obvious to me that we should be normalizing weak and inherent aliases too, since they can always be normalized. This PR still leaves open the question of what to do with opaques, though 💀
**Also**, we need to structurally resolve the target of a coercion, for the UI test to work.
r? `@lcnr`
Store the laziness of type aliases in their `DefKind`
Previously, we would treat paths referring to type aliases as *lazy* type aliases if the current crate had lazy type aliases enabled independently of whether the crate which the alias was defined in had the feature enabled or not.
With this PR, the laziness of a type alias depends on the crate it is defined in. This generally makes more sense to me especially if / once lazy type aliases become the default in a new edition and we need to think about *edition interoperability*:
Consider the hypothetical case where the dependency crate has an older edition (and thus eager type aliases), it exports a type alias with bounds & a where-clause (which are void but technically valid), the dependent crate has the latest edition (and thus lazy type aliases) and it uses that type alias. Arguably, the bounds should *not* be checked since at any time, the dependency crate should be allowed to change the bounds at will with a *non*-major version bump & without negatively affecting downstream crates.
As for the reverse case (dependency: lazy type aliases, dependent: eager type aliases), I guess it rules out anything from slight confusion to mild annoyance from upstream crate authors that would be caused by the compiler ignoring the bounds of their type aliases in downstream crates with older editions.
---
This fixes#114468 since before, my assumption that the type alias associated with a given weak projection was lazy (and therefore had its variances computed) did not necessarily hold in cross-crate scenarios (which [I kinda had a hunch about](https://github.com/rust-lang/rust/pull/114253#discussion_r1278608099)) as outlined above. Now it does hold.
`@rustbot` label F-lazy_type_alias
r? `@oli-obk`
Remove arm crypto target feature
Follow-up to https://github.com/rust-lang/stdarch/pull/1407.
LLVM has moved away from a combined `crypto` feature on both aarch64 and arm, and we did the same on aarch64, but were deferred from doing the same on arm due to compatibility with older LLVM.
As the minimum LLVM version has increased, we can now remove this (unstable) target feature on arm.
r? `@Amanieu`
Warn when #[macro_export] is applied on decl macros
The existing code checks if `#[macro_export]` is being applied to an item other than a macro, and warns in that case, but fails to take into account macros 2.0/decl macros, despite the attribute having no effect on these macros.
This PR adds a special case for decl macros with the aforementioned attribute, so that the warning is a bit more precise. Instead of just saying "this attribute has no effect", hint towards the fact that decl macros get exported and resolved like regular items.
It also removes a `#[macro_export]` attribute which was applied on one of `core`'s decl macros.
- core: Remove #[macro_export] from `debug_assert_matches`
- check_attrs: Warn when #[macro_export] is used on macros 2.0
Avoid exporting __rust_alloc_error_handler_should_panic more than once.
Exporting `__rust_alloc_error_handler_should_panic` multiple times causes `ld.gold` to balk with: `error: version script assignment of to symbol __rust_alloc_error_handler_should_panic failed: symbol not defined`
Specifically this breaks builds of 1.70.0 and newer on DragonFly and YoctoProject with `ld.gold`. Builds with `ld.bfd` and `lld` should be unaffected.
http://errors.yoctoproject.org/Errors/Details/708194/
Fix#90546 by filtering out global value function pointer types from the
type tests, and adding the LowerTypeTests pass to the rustc LTO
optimization pipelines.
Update to LLVM 17
Expected LLVM 17.0.0 release date: Sep 5th
Rust 1.73 release date: Oct 5th
Compatibility changes in this PR:
- Drop LLVM_RUSTLLVM check for target-cpu table, which no longer requires a patch with LLVM 17.
- Update powerpc data layouts, which now include function alignment information. As usual, downgrade for older LLVM versions.
- Adjust the stack-protector.rs test so that the stack smashing does not get optimized away.
- Adjust path of crtbegin.c and crtend.c in compiler-rt.
- Updated dist-riscv64-linux to use binutils 2.36 in order to recognize the zicsr feature, which is no longer part of the base ISA.
- Fixed symlink for asm include directory on dist-various-2. We should use `/usr/include/x86_64-linux-gnu/asm` for the host, rather than `/usr/include/asm-generic`.
Upstream patches:
- [x] https://reviews.llvm.org/D156525 (backported)
Perf run: https://perf.rust-lang.org/compare.html?start=f239bb6bea94d16d902c36d72b5cabdddefb3cab&end=8030d71a95a3ea79f5fc95232c32f9b78effb92d&stat=instructions:uFixes#109671.
Successful: dist-x86_64-linux, dist-aarch64-linux, dist-s390x-linux, dist-powerpc-linux, armhf-gnu, wasm32
The compiler should emit a more specific error when the `#[macro_export]`
attribute is present on a decl macro, instead of silently ignoring it.
This commit adds the required error message in rustc_passes/messages.ftl,
as well as a note. A new variant is added to the `errors::MacroExport`
enum, specifically for the case where the attribute is added to a macro
2.0.
The `debug_assert_matches` macro was marked with the `#[macro_export]` attribute,
despite being a declarative macro/macro 2.0, for which the exporting rules are similar
to items. In fact, `#[macro_export]` on a decl macro has no effect on its visibility.
We should symlink /usr/include/x86_64-linux-gnu/asm for the host
triple, rather than /usr/include/asm-generic, which is used in the
implementation for asm for specific triple, but shouldn't be used
by itself.
