Both diagnostic and subdiagnostic derives were missing the ability to
add warnings to diagnostics - this is made more difficult by the `warn`
attribute already existing, so this name being unavailable for the
derives to use. `#[warn_]` is used instead, which requires
special-casing so that `{span_,}warn` is called instead of
`{span_,}warn_`.
Signed-off-by: David Wood <david.wood@huawei.com>
Add support for `MultiSpan` with any of the attributes that work on a
`Span` - requires that diagnostic logic generated for these attributes
are emitted in the by-move block rather than the by-ref block that they
would normally have been generated in.
Signed-off-by: David Wood <david.wood@huawei.com>
macros: `LintDiagnostic` derive
- Move `LintDiagnosticBuilder` into `rustc_errors` so that a diagnostic derive can refer to it.
- Introduce a `DecorateLint` trait, which is equivalent to `SessionDiagnostic` or `AddToDiagnostic` but for lints. Necessary without making more changes to the lint infrastructure as `DecorateLint` takes a `LintDiagnosticBuilder` and re-uses all of the existing logic for determining what type of diagnostic a lint should be emitted as (e.g. error/warning).
- Various refactorings of the diagnostic derive machinery (extracting `build_field_mapping` helper and moving `sess` field out of the `DiagnosticDeriveBuilder`).
- Introduce a `LintDiagnostic` derive macro that works almost exactly like the `SessionDiagnostic` derive macro except that it derives a `DecorateLint` implementation instead. A new derive is necessary for this because `SessionDiagnostic` is intended for when the generated code creates the diagnostic. `AddToDiagnostic` could have been used but it would have required more changes to the lint machinery.
~~At time of opening this pull request, ignore all of the commits from #98624, it's just the last few commits that are new.~~
r? `@oli-obk`
`SessionDiagnostic` isn't suitable for use on lints as whether or not it
creates an error or a warning is decided at compile-time by the macro,
whereas lints decide this at runtime based on the location of the lint
being reported (as it will depend on the user's `allow`/`deny`
attributes, etc). Re-using most of the machinery for
`SessionDiagnostic`, this macro introduces a `LintDiagnostic` derive
which implements a `DecorateLint` trait, taking a
`LintDiagnosticBuilder` and adding to the lint according to the
diagnostic struct.
`sess` field of `SessionDiagnosticDeriveBuilder` is never actually used
in the builder's member functions, so it doesn't need to be a field.
Signed-off-by: David Wood <david.wood@huawei.com>
Move the logic for building a field mapping (which is used by the
building of format strings in `suggestion` annotations) into a helper
function.
Signed-off-by: David Wood <david.wood@huawei.com>
As in the diagnostic derive, using typed identifiers in the
subdiagnostic derive improves the diagnostics of using the subdiagnostic
derive as Fluent messages will be confirmed to exist at compile-time.
Signed-off-by: David Wood <david.wood@huawei.com>
Using typed identifiers instead of strings with the Fluent identifier
enables the diagnostic derive to benefit from the compile-time
validation that comes with typed identifiers - use of a non-existent
Fluent identifier will not compile.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit makes type folding more like the way chalk does it.
Currently, `TypeFoldable` has `fold_with` and `super_fold_with` methods.
- `fold_with` is the standard entry point, and defaults to calling
`super_fold_with`.
- `super_fold_with` does the actual work of traversing a type.
- For a few types of interest (`Ty`, `Region`, etc.) `fold_with` instead
calls into a `TypeFolder`, which can then call back into
`super_fold_with`.
With the new approach, `TypeFoldable` has `fold_with` and
`TypeSuperFoldable` has `super_fold_with`.
- `fold_with` is still the standard entry point, *and* it does the
actual work of traversing a type, for all types except types of
interest.
- `super_fold_with` is only implemented for the types of interest.
Benefits of the new model.
- I find it easier to understand. The distinction between types of
interest and other types is clearer, and `super_fold_with` doesn't
exist for most types.
- With the current model is easy to get confused and implement a
`super_fold_with` method that should be left defaulted. (Some of the
precursor commits fixed such cases.)
- With the current model it's easy to call `super_fold_with` within
`TypeFolder` impls where `fold_with` should be called. The new
approach makes this mistake impossible, and this commit fixes a number
of such cases.
- It's potentially faster, because it avoids the `fold_with` ->
`super_fold_with` call in all cases except types of interest. A lot of
the time the compile would inline those away, but not necessarily
always.
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Adds a new `fluent_messages` macro which performs compile-time
validation of the compiler's Fluent resources (i.e. that the resources
parse and don't multiply define the same messages) and generates
constants that make using those messages in diagnostics more ergonomic.
For example, given the following invocation of the macro..
```ignore (rust)
fluent_messages! {
typeck => "./typeck.ftl",
}
```
..where `typeck.ftl` has the following contents..
```fluent
typeck-field-multiply-specified-in-initializer =
field `{$ident}` specified more than once
.label = used more than once
.label-previous-use = first use of `{$ident}`
```
...then the macro parse the Fluent resource, emitting a diagnostic if it
fails to do so, and will generate the following code:
```ignore (rust)
pub static DEFAULT_LOCALE_RESOURCES: &'static [&'static str] = &[
include_str!("./typeck.ftl"),
];
mod fluent_generated {
mod typeck {
pub const field_multiply_specified_in_initializer: DiagnosticMessage =
DiagnosticMessage::fluent("typeck-field-multiply-specified-in-initializer");
pub const field_multiply_specified_in_initializer_label_previous_use: DiagnosticMessage =
DiagnosticMessage::fluent_attr(
"typeck-field-multiply-specified-in-initializer",
"previous-use-label"
);
}
}
```
When emitting a diagnostic, the generated constants can be used as
follows:
```ignore (rust)
let mut err = sess.struct_span_err(
span,
fluent::typeck::field_multiply_specified_in_initializer
);
err.span_default_label(span);
err.span_label(
previous_use_span,
fluent::typeck::field_multiply_specified_in_initializer_label_previous_use
);
err.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
With `ignore (rust)` rather than `ignore (pseudo-Rust)` my editor
highlights the code in the block, which is nicer.
Signed-off-by: David Wood <david.wood@huawei.com>
Manual implementors of translatable diagnostics will need to call
`set_arg`, not just the derive, so make this function a bit more
ergonomic by taking `IntoDiagnosticArg` rather than
`DiagnosticArgValue`.
Signed-off-by: David Wood <david.wood@huawei.com>
Type attributes could previously be used to support spanless
subdiagnostics but these couldn't easily be made optional in the same
way that spanned subdiagnostics could by using a field attribute on a
field with an `Option<Span>` type. Spanless subdiagnostics can now be
specified on fields with `()` type or `Option<()>` type.
Signed-off-by: David Wood <david.wood@huawei.com>
Diagnostics can have multiple primary spans, or have subdiagnostics
repeated at multiple locations, so support `Vec<..>` fields in the
diagnostic derive which become loops in the generated code.
Signed-off-by: David Wood <david.wood@huawei.com>
Add `#[subdiagnostic]` field attribute to the diagnostic derive which
is applied to fields that have types which use the subdiagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
In the initial implementation of the `SessionSubdiagnostic`, the
`Applicability` of a suggestion can be set both as a field and as part
of the attribute, this commit adds the same support to the original
`SessionDiagnostic` derive.
Signed-off-by: David Wood <david.wood@huawei.com>
`SetOnce` trait was introduced in the subdiagnostic derive to simplify
the code a little bit, re-use it in the diagnostic derive too.
Signed-off-by: David Wood <david.wood@huawei.com>
Remove some duplicated code between both diagnostic derives by
introducing helper functions for reporting an error in case of a invalid
attribute.
Signed-off-by: David Wood <david.wood@huawei.com>
Split `SessionDiagnostic` and `SessionSubdiagnostic` derives and the
various helper functions into multiple modules.
Signed-off-by: David Wood <david.wood@huawei.com>
Add a new derive, `#[derive(SessionSubdiagnostic)]`, which enables
deriving structs for labels, notes, helps and suggestions.
Signed-off-by: David Wood <david.wood@huawei.com>
Extends support for generating `DiagnosticMessage::FluentIdentifier`
messages from `SessionDiagnostic` derive to `#[suggestion]`.
Signed-off-by: David Wood <david.wood@huawei.com>
Extends support for generating `DiagnosticMessage::FluentIdentifier`
messages from `SessionDiagnostic` derive to `#[label]`.
Signed-off-by: David Wood <david.wood@huawei.com>
In an effort to make it easier to port diagnostics to
`SessionDiagnostic` (for translation) and since translation slugs could
replace error codes, make error codes optional in the
`SessionDiagnostic` derive.
Signed-off-by: David Wood <david.wood@huawei.com>
A call to `set_arg` is generated for every field of a
`SessionDiagnostic` struct without attributes, but not all types support
being an argument, so `#[no_arg]` is introduced to skip these fields.
Signed-off-by: David Wood <david.wood@huawei.com>
Small commit renaming `#[message]` to `#[primary_span]` as this more
accurately reflects what it does now.
Signed-off-by: David Wood <david.wood@huawei.com>
Small commit adding backticks around types and annotations in the error
messages from the session diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
Non-subdiagnostic fields (i.e. those that don't have `#[label]`
attributes or similar and are just additional context) have to be added
as arguments for Fluent messages to refer them. This commit extends the
`SessionDiagnostic` derive to do this for all fields that do not have
attributes and introduces an `IntoDiagnosticArg` trait that is
implemented on all types that can be converted to a argument for Fluent.
Signed-off-by: David Wood <david.wood@huawei.com>
