Before this change, the following functions and macros were annotated
with `#[cfg(target_has_atomic = "8")]` or
`#[cfg(target_has_atomic_load_store = "8")]`:
* `atomic_int`
* `strongest_failure_ordering`
* `atomic_swap`
* `atomic_add`
* `atomic_sub`
* `atomic_compare_exchange`
* `atomic_compare_exchange_weak`
* `atomic_and`
* `atomic_nand`
* `atomic_or`
* `atomic_xor`
* `atomic_max`
* `atomic_min`
* `atomic_umax`
* `atomic_umin`
However, none of those functions and macros actually depend on 8-bit
width and they are needed for all atomic widths (16-bit, 32-bit, 64-bit
etc.). Some targets might not support 8-bit atomics (i.e. BPF, if we
would enable atomic CAS for it).
This change fixes that by removing the `"8"` argument from annotations,
which results in accepting the whole variety of widths.
Fixes#106845Fixes#106795
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
Memory pre-fetching prefers forward scanning vs backwards scanning, and the
code-gen is usually better. For the most sensitive types such as integers, these
are planned to be merged bidirectionally at once. So there is no benefit in
scanning backwards.
The largest perf gains are seen for full ascending and descending inputs, which
see 1.5x speedups. Random inputs benefit too, and some patterns can loose out,
but these losses are minimal.
Improve the documentation of `black_box`
There don't seem to be many great resources on how `black_box` should be used, so I added some information here
Unify stable and unstable sort implementations in same core module
This moves the stable sort implementation to the core::slice::sort module. By virtue of being in core it can't access `Vec`. The two `Vec` used by merge sort, `buf` and `runs`, are modelled as custom types that implement the very limited required `Vec` interface with the help of provided allocation and free functions. This is done to allow future re-use of functions and logic between stable and unstable sort. Such as `insert_head`.
This is in preparation of #100856 and #104116. It only moves code, it *doesn't* change any of the sort related logic. This unlocks the ability to share `insert_head`, `insert_tail`, `swap_if_less` `merge` and more.
Tagging ````@Mark-Simulacrum```` I hope this allows progress on #100856, by moving `merge_sort` here I hope future changes will be easier to review.
- Eliminates all the `get_context` calls that async lowering created.
- Replace all `Local` `ResumeTy` types with `&mut Context<'_>`.
The `Local`s that have their types replaced are:
- The `resume` argument itself.
- The argument to `get_context`.
- The yielded value of a `yield`.
The `ResumeTy` hides a `&mut Context<'_>` behind an unsafe raw pointer, and the
`get_context` function is being used to convert that back to a `&mut Context<'_>`.
Ideally the async lowering would not use the `ResumeTy`/`get_context` indirection,
but rather directly use `&mut Context<'_>`, however that would currently
lead to higher-kinded lifetime errors.
See <https://github.com/rust-lang/rust/issues/105501>.
The async lowering step and the type / lifetime inference / checking are
still using the `ResumeTy` indirection for the time being, and that indirection
is removed here. After this transform, the generator body only knows about `&mut Context<'_>`.
Lift `T: Sized` bounds from some `strict_provenance` pointer methods
This PR removes requirement for `T` (pointee type) to be `Sized` to call `pointer::{addr, expose_addr, with_addr, map_addr}`. These functions don't use `T`'s size, so there is no reason for them to require this. Updated public API:
cc ``@Gankra,`` #95228
r? libs-api
Add heapsort fallback in `select_nth_unstable`
Addresses #102451 and #106933.
`slice::select_nth_unstable` uses a quick select implementation based on the same pattern defeating quicksort algorithm that `slice::sort_unstable` uses. `slice::sort_unstable` uses a recursion limit and falls back to heapsort if there were too many bad pivot choices, to ensure O(n log n) worst case running time (known as introsort). However, `slice::select_nth_unstable` does not have such a fallback strategy, which leads to it having a worst case running time of O(n²) instead. #102451 links to a playground which generates pathological inputs that show this quadratic behavior. On my machine, a randomly generated slice of length `1 << 19` takes ~200µs to calculate its median, whereas a pathological input of the same length takes over 2.5s. This PR adds an iteration limit to `select_nth_unstable`, falling back to heapsort, which ensures an O(n log n) worst case running time (introselect). With this change, there was no noticable slowdown for the random input, but the same pathological input now takes only ~1.2ms. In the future it might be worth implementing something like Median of Medians or Fast Deterministic Selection instead, which guarantee O(n) running time for all possible inputs. I've left this as a `FIXME` for now and only implemented the heapsort fallback to minimize the needed code changes.
I still think we should clarify in the `select_nth_unstable` docs that the worst case running time isn't currently O(n) (the original reason that #102451 was opened), but I think it's a lot better to be able to guarantee O(n log n) instead of O(n²) for the worst case.
Remove various double spaces in the libraries.
I was just pretty bothered by this when reading the source for a function, and was suggested to check if this happened elsewhere.
reword Option::as_ref and Option::map examples
The description for the examples of `Option::as_ref` and `Option::map` imply that the example is only doing type conversion, when it is actually finding the length of a string.
Changes the wording to imply that some operation is being run on the value contained in the `Option`
closes#104476
Stabilize `::{core,std}::pin::pin!`
As discussed [over here](https://github.com/rust-lang/rust/issues/93178#issuecomment-1295843548), it looks like a decent time to stabilize the `pin!` macro.
### Public API
```rust
// in module `core::pin`
/// API: `fn pin<T>($value: T) -> Pin<&'local mut T>`
pub macro pin($value:expr $(,)?) {
…
}
```
- Tracking issue: #93178
(now all this needs is an FCP by the proper team?)
doc: rewrite doc for signed int::{carrying_add,borrowing_sub}
Reword the documentation for bigint helper methods, signed `int::{carrying_add,borrowing_sub}` (#85532).
This change is a follow-up to #101889, which was for the unsigned methods.
Don't derive Debug for `OnceWith` & `RepeatWith`
Closures don't impl Debug, so the derived impl is kinda useless. The behavior of not debug-printing closures is consistent with the rest of the iterator adapters/sources.
Suggest `impl Fn*` and `impl Future` in `-> _` return suggestions
Follow-up to #106172, only the last commit is relevant. Can rebase once that PR is landed for easier review.
Suggests `impl Future` and `impl Fn{,Mut,Once}` in `-> _` return suggestions.
r? `@estebank`
default OOM handler: use non-unwinding panic, to match std handler
The OOM handler in std will by default abort. This adjusts the default in liballoc to do the same, using the `can_unwind` flag on the panic info to indicate a non-unwinding panic.
In practice this probably makes little difference since the liballoc default will only come into play in no-std situations where people write a custom panic handler, which most likely will not implement unwinding. But still, this seems more consistent.
Cc `@rust-lang/wg-allocators,` https://github.com/rust-lang/rust/issues/66741
`Split*::as_str` refactor
I've made this patch almost a year ago, so the rename and the behavior change are in one commit, sorry 😅
This fixes#84974, as it's required to make other changes work.
This PR
- Renames `as_str` method of string `Split*` iterators to `remainder` (it seems like the `as_str` name was confusing to users)
- Makes `remainder` return `Option<&str>`, to distinguish between "the iterator is exhausted" and "the tail is empty", this was [required on the tracking issue](https://github.com/rust-lang/rust/issues/77998#issuecomment-832696619)
r? `@m-ou-se`
Revert "Implement allow-by-default `multiple_supertrait_upcastable` lint"
This is a clean revert of #105484.
I confirmed that reverting that PR fixes the regression reported in #106247. ~~I can't say I understand what this code is doing, but maybe it can be re-landed with a different implementation.~~ **Edit:** https://github.com/rust-lang/rust/issues/106247#issuecomment-1367174384 has an explanation of why #105484 ends up surfacing spurious `where_clause_object_safety` errors. The implementation of `where_clause_object_safety` assumes we only check whether a trait is object safe when somebody actually uses that trait with `dyn`. However the implementation of `multiple_supertrait_upcastable` added in the problematic PR involves checking *every* trait for whether it is object-safe.
FYI `@nbdd0121` `@compiler-errors`
Add #[inline] markers to once_cell methods
Added inline markers to all simple methods under the `once_cell` feature. Relates to #74465 and #105587
This should not block #105587
Replace libstd, libcore, liballoc terminology in docs
Fixes#103551. I changed line comments containing the outdated terms as well.
It would be great if someone with more experience could weigh in on whether these changes introduce ambiguity as suggested in https://github.com/rust-lang/rust/issues/103551#issuecomment-1291225315.
doc: clearer and more correct Iterator::scan
The `Iterator::scan` documentation seemed a little misleading to my newcomer
eyes, and this tries to address that.
* I found “similar to `fold`” unhelpful because (a) the similarity is only that
they maintain state between iterations, and (b) the _dissimilarity_ is no less
important: one returns a final value and the other an iterator. So this
replaces that with “which, like `fold`, holds internal state, but unlike
`fold`, produces a new iterator.
* I found “the return value from the closure, an `Option`, is yielded by the
iterator” to be downright incorrect, because “yielded by the iterator” means
“returned by the `next` method wrapped in `Some`”, so this implied that `scan`
would convert an input iterator of `T` to an output iterator of `Option<T>`.
So this replaces “yielded by the iterator” with “returned by the `next`
method” and elaborates: “Thus the closure can return `Some(value)` to yield
`value`, or `None` to end the iteration.”
* This also changes the example to illustrate the latter point by returning
`None` to terminate the iteration early based on `state`.
Bump master bootstrap compiler
This PR bumps the bootstrap compiler to the beta created earlier this week, cherry-picks the stabilization version number updates, and updates the `cfg(bootstrap)`s.
r? `@Mark-Simulacrum`
Implement allow-by-default `multiple_supertrait_upcastable` lint
The lint detects when an object-safe trait has multiple supertraits.
Enabled in libcore and liballoc as they are low-level enough that many embedded programs will use them.
r? `@nikomatsakis`
Clarify docs of `RefCell`
Comparison operators only panic if the `RefCell` is mutably borrowed, and `RefCell::swap()` can also panic if swapping a `RefCell` with itself.
Fix UnsafeCell Documentation Spelling Error
This fixes the spelling of "deallocated" (instead of the original "deallocted") In the `cell.rs` source file. Honestly probably not worth the time to evaluate, but since it doesn't involve any code change, I figure why not?
Fix a formatting error in Iterator::for_each docs
There is a formatting error (extra space in an assignment) in the documentation of `core::iter::Iterator::for_each`, which I have fixed in this pull request.
More inference-friendly API for lazy
The signature for new was
```
fn new<F>(f: F) -> Lazy<T, F>
```
Notably, with `F` unconstrained, `T` can be literally anything, and just `let _ = Lazy::new(|| 92)` would not typecheck.
This historiacally was a necessity -- `new` is a `const` function, it couldn't have any bounds. Today though, we can move `new` under the `F: FnOnce() -> T` bound, which gives the compiler enough data to infer the type of T from closure.
abort immediately on bad mem::zeroed/uninit
Now that we have non-unwinding panics, let's use them for these assertions. This re-establishes the property that `mem::uninitialized` and `mem::zeroed` will never unwind -- the earlier approach of causing panics here sometimes led to hard-to-debug segfaults when the surrounding code was not able to cope with the unexpected unwinding.
Cc `@bjorn3` I did not touch cranelift but I assume it needs a similar patch. However it has a `codegen_panic` abstraction that I did not want to touch since I didn't know how else it is used.
add ptr::from_{ref,mut}
We have methods to avoid almost all `as` casts around raw pointer handling, except for the initial cast from reference to raw pointer. These new methods close that gap.
(I also moved `null_mut` next to `null` to keep the file consistently organized.)
r? libs-api
Tracking issue: https://github.com/rust-lang/rust/issues/106116
According to Godbolt¹, on x86_64 using binary and produces slightly
better code than using subtraction. Readability of both is pretty
much equivalent so might just as well use the shorter option.
¹ https://rust.godbolt.org/z/9jM3ejbMx
Rollup of 8 pull requests
Successful merges:
- #105584 (add assert messages if chunks/windows are length 0)
- #105602 (interpret: add read_machine_[ui]size convenience methods)
- #105824 (str.lines() docstring: clarify that line endings are not returned)
- #105980 (Refer to "Waker" rather than "RawWaker" in `drop` comment)
- #105986 (Fix typo in reading_half_a_pointer.rs)
- #105995 (Add regression test for #96530)
- #106008 (Sort lint_groups in no_lint_suggestion)
- #106014 (Add comment explaining what the scrape-examples-toggle.goml GUI test is about)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Clarify that raw retags are not permitted in Mir
Not sure when this changed, but documentation and the validator needed to be updated. This also removes raw retags from custom mir.
cc rust-lang/miri#2735
r? `@RalfJung`
Refer to "Waker" rather than "RawWaker" in `drop` comment
In my view this is technically more correct as `Waker` actually implements `Drop` (which calls the `drop` method) whereas `RawWaker` does not.
str.lines() docstring: clarify that line endings are not returned
Previously, the str.lines() docstring stated that lines are split at line endings, but not whether those were returned or not. This new version of the docstring states this explicitly, avoiding the need of getting to doctests to get an answer to this FAQ.
Rename `assert_uninit_valid` intrinsic
It's not about "uninit" anymore but about "filling with 0x01 bytes" so the name should at least try to reflect that.
This is actually not fully correct though, as it does still panic for all uninit with `-Zstrict-init-checks`. I'm not sure what the best way is to deal with that not causing confusion. I guess we could just remove the flag? I don't think having it makes a lot of sense anymore with the direction that we have chose to go. It could be relevant again if #100423 lands so removing it may be a bit over eager.
r? `@RalfJung`
Implement `From<bool>` for f32, f64
As is required for trait implementations, these are insta-stable. Given there is a release tomorrow and this needs FCP, I set 1.65 as the stable version.
`@rustbot` label +A-floating-point +C-feature-request +needs-fcp +relnotes +S-waiting-on-review +T-libs-api -T-libs
Implement va_list and va_arg for s390x FFI
Following the s390x ELF ABI and based on the clang implementation, provide appropriate definitions of va_list in library/core/src/ffi/mod.rs and va_arg handling in compiler/rustc_codegen_llvm/src/va_arg.rs.
Fixes the following test cases on s390x:
src/test/run-make-fulldeps/c-link-to-rust-va-list-fn src/test/ui/abi/variadic-ffi.rs
Fixes https://github.com/rust-lang/rust/issues/84628.
Following the s390x ELF ABI and based on the clang implementation,
provide appropriate definitions of va_list in library/core/src/ffi/mod.rs
and va_arg handling in compiler/rustc_codegen_llvm/src/va_arg.rs.
Fixes the following test cases on s390x:
src/test/run-make-fulldeps/c-link-to-rust-va-list-fn
src/test/ui/abi/variadic-ffi.rs
Fixes https://github.com/rust-lang/rust/issues/84628.
Revert "Replace usage of `ResumeTy` in async lowering with `Context`"
Reverts rust-lang/rust#105250
Fixes: #105501
Following instructions from [forge](https://forge.rust-lang.org/compiler/reviews.html#reverts).
This change introduced a breaking change that is not actionable nor relevant, and is blocking updates to our toolchain. Along with other comments on the CL marking issues that are fixed by reverts, reverting is best until these issues can be resolved
cc. `@Swatinem`
Support call and drop terminators in custom mir
The only caveat with this change is that cleanup blocks are not supported. I would like to add them, but it's not quite clear to me what the best way to do that is, so I'll have to think about it some more.
r? ``@oli-obk``
Previously, the str.lines() docstring stated that lines are split at line
endings, but not whether those were returned or not. This new version of the
docstring states this explicitly, avoiding the need of getting to doctests to
get an answer to this FAQ.
This commit
- Renames `Split*::{as_str -> remainder}` as it seems less confusing
- Makes `remainder` return Option<&str> to distinguish between
"iterator is exhausted" and "the tail is empty"
doc: Fix a few small issues
Hey, while reading through the (awesome) stdlib docs, I found a few minor typos.
* A few typos around generic types (`;` vs `,`)
* Use inline code formatting for code fragments
* One instance of wrong wording
Custom MIR: Many more improvements
Commits are each atomic changes, best reviewed one at a time, with the exception that the last commit includes all the documentation.
### First commit
Unsafetyck was not correctly disabled before for `dialect = "built"` custom MIR. This is fixed and a regression test is added.
### Second commit
Implements `Discriminant`, `SetDiscriminant`, and `SwitchInt`.
### Third commit
Implements indexing, field, and variant projections.
### Fourth commit
Documents the previous commits and everything else.
There is some amount of weirdness here due to having to beat Rust syntax into cooperating with MIR concepts, but it hopefully should not be too much. All of it is documented.
r? `@oli-obk`
