Rollup of 8 pull requests
Successful merges:
- #97971 (Enable varargs support for calling conventions other than C or cdecl )
- #101428 (Add mir building test directory)
- #101944 (rustdoc: clean up `#toggle-all-docs`)
- #102101 (check lld version to choose correct option to disable multi-threading in tests)
- #102689 (Add a tier 3 target for the Sony PlayStation 1)
- #103746 (rustdoc: add support for incoherent impls on structs and traits)
- #103758 (Add regression test for reexports in search results)
- #103764 (All verbosity checks in `PrettyPrinter` now go through `PrettyPrinter::should_print_verbose`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
All verbosity checks in `PrettyPrinter` now go through `PrettyPrinter::should_print_verbose`
Follow-up to #103428. That pr only partially fixed#94187. In some cases (like closures) `std::any::type_name` was still producing a different output when `-Zverbose` was enabled.
This pr fixes those cases and adds a new function `PrettyPrinter::should_print_verbose`. This function should always be used over `self.tcx().sess.verbose()` inside a `impl PrettyPrinter`.
Maybe closes#94187 now.
r? ``@compiler-errors``
Add a tier 3 target for the Sony PlayStation 1
This adds a tier 3 target, `mipsel-sony-psx`, for the Sony PlayStation 1. I've tested it pretty thoroughly with [this SDK](https://github.com/ayrtonm/psx-sdk-rs) I wrote for it.
From the [tier 3 target policy](https://doc.rust-lang.org/rustc/target-tier-policy.html#tier-3-target-policy) (I've omitted the subpoints for brevity, but read over everything)
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I'd be the designated developer
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The target name follows the conventions of the existing PSP target (`mipsel-sony-psp`) and uses `psx` following the convention of the broader [PlayStation homebrew community](https://psx-spx.consoledev.net/).
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
No legal issues with this target.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
The psx supports `core` and `alloc`, but will likely not support `std` anytime soon.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
This target has an SDK and a `cargo-psx` tool for formatting binaries as psx executables. Documentation and examples are provided in the [psx-sdk-rs README](https://github.com/ayrtonm/psx-sdk-rs#psx-sdk-rs), the SDK and cargo tool are both available through crates.io and docs.rs has [SDK documentation](https://docs.rs/psx/latest/psx/).
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
No problem
check lld version to choose correct option to disable multi-threading in tests
Testing compiler with 'use-lld = true' may be incorrect with old lld.
Flag, disabling multi-threading, should consider lld version.
r? ``@petrochenkov``
rustdoc: clean up `#toggle-all-docs`
This change converts the element from an `<a>` link to a button. It's pretty much directly trading slightly more CSS for slightly less HTML, and it's also semantically correct (so you don't get a broken "bookmark" option when you right click on it).
While doing this, I also got rid of the unnecessary `class="inner"` attribute on the inner span. There was a style targeting `.collapse-toggle > .inner`, but no CSS ever targeted the `#toggle-all-docs > .inner`.
Preview: https://notriddle.com/notriddle-rustdoc-test/button-toggle-all-docs/index.html
Add mir building test directory
The first commit renames `mir-map.0` mir dumps to `built.after` dumps. I am happy to drop this commit if someone can explain the origin of the name.
The second commit moves a bunch of mir building tests into their own directory. I did my best to make sure that all of these tests are actually testing mir building, and not just incidentally using `built.after`
r? ``@oli-obk``
Enable varargs support for calling conventions other than C or cdecl
This patch makes it possible to use varargs for calling conventions,
which are either based on C (efiapi) or C is based on them (sysv64 and win64).
Also pinging ``@phlopsi,`` because he noticed first this oversight when writing a library for UEFI.
Use `br` instead of `switch` in more cases.
`codegen_switchint_terminator` already uses `br` instead of `switch` when there is one normal target plus the `otherwise` target. But there's another common case with two normal targets and an `otherwise` target that points to an empty unreachable BB. This comes up a lot when switching on the tags of enums that use niches.
The pattern looks like this:
```
bb1: ; preds = %bb6
%3 = load i8, ptr %_2, align 1, !range !9, !noundef !4
%4 = sub i8 %3, 2
%5 = icmp eq i8 %4, 0
%_6 = select i1 %5, i64 0, i64 1
switch i64 %_6, label %bb3 [
i64 0, label %bb4
i64 1, label %bb2
]
bb3: ; preds = %bb1
unreachable
```
This commit adds code to convert the `switch` to a `br`:
```
bb1: ; preds = %bb6
%3 = load i8, ptr %_2, align 1, !range !9, !noundef !4
%4 = sub i8 %3, 2
%5 = icmp eq i8 %4, 0
%_6 = select i1 %5, i64 0, i64 1
%6 = icmp eq i64 %_6, 0
br i1 %6, label %bb4, label %bb2
bb3: ; No predecessors!
unreachable
```
This has a surprisingly large effect on compile times, with reductions of 5% on debug builds of some crates. The reduction is all due to LLVM taking less time. Maybe LLVM is just much better at handling `br` than `switch`.
The resulting code is still suboptimal.
- The `icmp`, `select`, `icmp` sequence is silly, converting an `i1` to an `i64` and back to an `i1`. But with the current code structure it's hard to avoid, and LLVM will easily clean it up, in opt builds at least.
- `bb3` is usually now truly dead code (though not always, so it can't be removed universally).
r? `@scottmcm`
`codegen_switchint_terminator` already uses `br` instead of `switch`
when there is one normal target plus the `otherwise` target. But there's
another common case with two normal targets and an `otherwise` target
that points to an empty unreachable BB. This comes up a lot when
switching on the tags of enums that use niches.
The pattern looks like this:
```
bb1: ; preds = %bb6
%3 = load i8, ptr %_2, align 1, !range !9, !noundef !4
%4 = sub i8 %3, 2
%5 = icmp eq i8 %4, 0
%_6 = select i1 %5, i64 0, i64 1
switch i64 %_6, label %bb3 [
i64 0, label %bb4
i64 1, label %bb2
]
bb3: ; preds = %bb1
unreachable
```
This commit adds code to convert the `switch` to a `br`:
```
bb1: ; preds = %bb6
%3 = load i8, ptr %_2, align 1, !range !9, !noundef !4
%4 = sub i8 %3, 2
%5 = icmp eq i8 %4, 0
%_6 = select i1 %5, i64 0, i64 1
%6 = icmp eq i64 %_6, 0
br i1 %6, label %bb4, label %bb2
bb3: ; No predecessors!
unreachable
```
This has a surprisingly large effect on compile times, with reductions
of 5% on debug builds of some crates. The reduction is all due to LLVM
taking less time. Maybe LLVM is just much better at handling `br` than
`switch`.
The resulting code is still suboptimal.
- The `icmp`, `select`, `icmp` sequence is silly, converting an `i1` to an `i64`
and back to an `i1`. But with the current code structure it's hard to avoid,
and LLVM will easily clean it up, in opt builds at least.
- `bb3` is usually now truly dead code (though not always, so it can't
be removed universally).
Don't use usub.with.overflow intrinsic
The canonical form of a usub.with.overflow check in LLVM are separate sub + icmp instructions, rather than a usub.with.overflow intrinsic. Using usub.with.overflow will generally result in worse optimization potential.
The backend will attempt to form usub.with.overflow when it comes to actual instruction selection. This is not fully reliable, but I believe this is a better tradeoff than using the intrinsic in IR.
Fixes#103285.
ci: Bring back ninja for dist builders
The primary reason for this is that make can result in a substantial under utilization of parallelism (noticed while testing on a workstation), mostly due to the submake structure preventing good dependency tracking and scheduling.
In f758c7b2a7 (Debian 6 doesn't have ninja, so use make for the dist builds) llvm.ninja was disabled due to lack of distro package. This is no longer the case with the CentOS 7 base, so bring ninja back for a performance boost.
rustdoc: Simplify modifications of effective visibility table
It is now obvious that rustdoc only calls `set_access_level` with foreign def ids and `AccessLevel::Public`.
The second commit makes one more step and separates effective visibilities coming from rustc from similar data collected by rustdoc for extern `DefId`s.
The original table is no longer modified and now only contains local def ids as populated by rustc.
cc https://github.com/rust-lang/rust/pull/102026 `@Bryanskiy`
Rollup of 5 pull requests
Successful merges:
- #93582 (Allow `impl Fn() -> impl Trait` in return position)
- #103560 (Point only to the identifiers in the typo suggestions of shadowed names instead of the entire struct)
- #103588 (rustdoc: add missing URL redirect)
- #103689 (Do fewer passes and generally be more efficient when filtering tests)
- #103740 (rustdoc: remove unnecessary CSS `.search-results { padding-bottom }`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
rustdoc: remove unnecessary CSS `.search-results { padding-bottom }`
There's nothing underneath it anyway. The conversation on #84462 never really spelled out why it was added.
Do fewer passes and generally be more efficient when filtering tests
Follow-on of the work I started with this PR: https://github.com/rust-lang/rust/pull/99939
Basically, the startup code for libtest is really inefficient, but that's not usually a problem because it is distributed in release and workloads are small. But under Miri which can be 100x slower than a debug build, these inefficiencies explode.
Most of the diff here is making test filtering single-pass. There are a few other small optimizations as well, but they are more straightforward.
With this PR, the startup time of the `iced` tests with `--features=code_asm,mvex` drops from 17 to 2 minutes (I think Miri has gotten slower under this workload since #99939). The easiest way to try this out is to set `MIRI_LIB_SRC` to a checkout of this branch when running `cargo +nightly miri test --features=code_asm,mvex`.
r? `@thomcc`
rustdoc: add missing URL redirect
https://github.com/rust-lang/rust/pull/94753 missed some redirect settings, and one of the missing URL shows up in an error message. This PR adds those redirects.
Point only to the identifiers in the typo suggestions of shadowed names instead of the entire struct
Fixes#103358.
As discussed in the issue, the `Span` of the candidate `Ident` for a typo replacement is stored alongside its `Symbol` in `TypoSuggestion`. Then, the span of the identifier is what the "you might have meant to refer to" note is pointed at, rather than the entire struct definition.
Comments in #103111 and the issue both suggest that it is desirable to:
1. include names defined in the same crate as the typo,
2. ignore names defined elsewhere such as in `std`, _and_
3. include names introduced indirectly via `use`.
Since a name from another crate but introduced via `use` has non-local `def_id`, to achieve this, a suggestion is displayed if either the `def_id` of the suggested name is local, or the `span` of the suggested name is in the same file as the typo itself.
Some UI tests have also been modified to reflect this change.
r? `@cjgillot`
Allow `impl Fn() -> impl Trait` in return position
_This was originally proposed as part of #93082 which was [closed](https://github.com/rust-lang/rust/pull/93082#issuecomment-1027225715) due to allowing `impl Fn() -> impl Trait` in argument position._
This allows writing the following function signatures:
```rust
fn f0() -> impl Fn() -> impl Trait;
fn f3() -> &'static dyn Fn() -> impl Trait;
```
These signatures were already allowed for common traits and associated types, there is no reason why `Fn*` traits should be special in this regard.
`impl Trait` in both `f0` and `f3` means "new existential type", just like with `-> impl Iterator<Item = impl Trait>` and such.
Arrow in `impl Fn() ->` is right-associative and binds from right to left, it's tested by [this test](a819fecb8d/src/test/ui/impl-trait/impl_fn_associativity.rs).
There even is a test that `f0` compiles:
2f004d2d40/src/test/ui/impl-trait/nested_impl_trait.rs (L25-L28)
But it was changed in [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-ccecca938872d65ffe8cd1c3ef1956e309fac83bcda547d8b16b89257e53a437R37) to test the opposite, probably unintentionally given [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-5a02f1ed43debed1fd24f7aad72490064f795b9420f15d847bac822aa4621a1cR476-R477).
r? `@nikomatsakis`
----
This limitation is especially annoying with async code, since it forces one to write this:
```rust
trait AsyncFn3<A, B, C>: Fn(A, B, C) -> <Self as AsyncFn3<A, B, C>>::Future {
type Future: Future<Output = Self::Out>;
type Out;
}
impl<A, B, C, Fut, F> AsyncFn3<A, B, C> for F
where
F: Fn(A, B, C) -> Fut,
Fut: Future,
{
type Future = Fut;
type Out = Fut::Output;
}
fn async_closure() -> impl AsyncFn3<i32, i32, i32, Out = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
Instead of:
```rust
fn async_closure() -> impl Fn(i32, i32, i32) -> impl Future<Output = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
Rollup of 8 pull requests
Successful merges:
- #102634 (compiletest: Refactor test rustcflags)
- #102721 (Prevent foreign Rust exceptions from being caught)
- #103415 (filter candidates in pick probe for diagnostics)
- #103618 (Rename some `OwnerId` fields.)
- #103625 (Accept `TyCtxt` instead of `TyCtxtAt` in `Ty::is_*` functions)
- #103653 (Add missing impl blocks for item reexported from private mod in JSON output)
- #103699 (Emit proper error when casting to `dyn*`)
- #103719 (fix typo in `try_reserve` method from `HashMap` and `HashSet`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add missing impl blocks for item reexported from private mod in JSON output
Fixes#102583.
Since we don't inline for the JSON output, the impl blocks from private modules are not present when we generate the output. To go around this limitation, in case the impl block doesn't have `#[doc(hidden)]` and is implementing a public item, we don't strip it.
cc `@fmease` `@aDotInTheVoid`
r? `@notriddle`
Accept `TyCtxt` instead of `TyCtxtAt` in `Ty::is_*` functions
Functions in answer:
- `Ty::is_freeze`
- `Ty::is_sized`
- `Ty::is_unpin`
- `Ty::is_copy_modulo_regions`
This allows to remove a lot of useless `.at(DUMMY_SP)`, making the code a bit nicer :3
r? `@compiler-errors`
