implement better availability probing for copy_file_range
Followup to https://github.com/rust-lang/rust/pull/75428#discussion_r469616547
Previously syscall detection was overly pessimistic. Any attempt to copy to an immutable file (EPERM) would disable copy_file_range support for the whole process.
The change tries to copy_file_range on invalid file descriptors which will never run into the immutable file case and thus we can clearly distinguish syscall availability.
ext/ucred: Support PID in peer creds on macOS
This is a follow-up to https://github.com/rust-lang/rust/pull/75148 (RFC: https://github.com/rust-lang/rust/issues/42839).
The original PR used `getpeereid` on macOS and the BSDs, since they don't (generally) support the `SO_PEERCRED` mechanism that Linux supplies.
This PR splits the macOS/iOS implementation of `peer_cred()` from that of the BSDs, since macOS supplies the `LOCAL_PEERPID` sockopt as a source of the missing PID. It also adds a `cfg`-gated tests that ensures that platforms with support for PIDs in `UCred` have the expected data.
Use is_write_vectored to optimize the write_vectored implementation for BufWriter
In case when the underlying writer does not have an efficient implementation `write_vectored`, the present implementation of
`write_vectored` for `BufWriter` may still forward vectored writes directly to the writer depending on the total length of the data. This misses the advantage of buffering, as the actually written slice may be small.
Provide an alternative code path for the non-vectored case, where the slices passed to `BufWriter` are coalesced in the buffer before being flushed to the underlying writer with plain `write` calls. The buffer is only bypassed if an individual slice's length is at least as large as the buffer.
Remove a FIXME comment referring to #72919 as the issue has been closed with an explanation provided.
The code in io::stdio before this change misused the ReentrantMutexes,
by calling init() on them and moving them afterwards. Now that
ReentrantMutex requires Pin for init(), this mistake is no longer easy
to make.
Fix incorrect io::Take's limit resulting from io::copy specialization
The specialization introduced in #75272 fails to update `io::Take` wrappers after performing the copy syscalls which bypass those wrappers. The buffer flushing before the copy does update them correctly, but the bytes copied after the initial flush weren't subtracted.
The fix is to subtract the bytes copied from each `Take` in the chain of wrappers, even when an error occurs during the syscall loop. To do so the `CopyResult` enum now has to carry the bytes copied so far in the error case.
Provide IntoInnerError::into_parts
Hi. This is an updated version of the IntoInnerError bits of my previous portmanteau MR #78689. Thanks to `@jyn514` and `@m-ou-se` for helpful comments there.
I have made this insta-stable since it seems like it will probably be uncontroversial, but that is definitely something that someone from the libs API team should be aware of and explicitly consider.
I included a tangentially-related commit providing documentation of the buffer full behaviiour of `&mut [u8] as Write`; the behaviour I am documenting is relied on by the doctest for `into_parts`.
In particular, IntoIneerError only currently provides .error() which
returns a reference, not an owned value. This is not helpful and
means that a caller of BufWriter::into_inner cannot acquire an owned
io::Error which seems quite wrong.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Use more std:: instead of core:: in docs for consistency
``@rustbot`` label T-doc
Some cleanup work to use `std::` instead of `core::` in docs as much as possible. This helps with terminology and consistency, especially for newcomers from other languages that have often heard of `std` to describe the standard library but not of `core`.
Edit: I also added more intra doc links when I saw the opportunity.
These tests write to the same filenames in /tmp and in some cases these
files don't get cleaned up properly. This caused issues for us when
different users run the tests on the same system, e.g.:
```
---- sys::unix::kernel_copy::tests::bench_file_to_file_copy stdout ----
thread 'sys::unix::kernel_copy::tests::bench_file_to_file_copy' panicked at 'called `Result::unwrap()` on an `Err` value: Os { code: 13, kind: PermissionDenied, message: "Permission denied" }', library/std/src/sys/unix/kernel_copy/tests.rs:71:10
---- sys::unix::kernel_copy::tests::bench_file_to_socket_copy stdout ----
thread 'sys::unix::kernel_copy::tests::bench_file_to_socket_copy' panicked at 'called `Result::unwrap()` on an `Err` value: Os { code: 13, kind: PermissionDenied, message: "Permission denied" }', library/std/src/sys/unix/kernel_copy/tests.rs💯10
```
Use `std::sys_common::io__test::tmpdir()` to solve this.
unix: Extend UnixStream and UnixDatagram to send and receive file descriptors
Add the functions `recv_vectored_fds` and `send_vectored_fds` to `UnixDatagram` and `UnixStream`. With this functions `UnixDatagram` and `UnixStream` can send and receive file descriptors, by using `recvmsg` and `sendmsg` system call.
std::io: Use sendfile for UnixStream
`UnixStream` was forgotten in #75272 .
Benchmark yields the following results.
Before:
`running 1 test
test sys::unix::kernel_copy::tests::bench_file_to_uds_copy ... bench: 54,399 ns/iter (+/- 6,817) = 2409 MB/s`
After:
`running 1 test
test sys::unix::kernel_copy::tests::bench_file_to_uds_copy ... bench: 18,627 ns/iter (+/- 6,007) = 7036 MB/s`
Rename `optin_builtin_traits` to `auto_traits`
They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
r? `@oli-obk` (feel free to re-assign if you're not the right reviewer for this)
Fix typo in `keyword` docs for traits
This PR fixes a small typo in the `keyword_docs.rs` file, describing the differences between the 2015 and 2018 editions of traits.
They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
Drop support for all cloudabi targets
`cloudabi` is a tier-3 target, and [it is no longer being maintained upstream][no].
This PR drops supports for cloudabi targets. Those targets are:
* aarch64-unknown-cloudabi
* armv7-unknown-cloudabi
* i686-unknown-cloudabi
* x86_64-unknown-cloudabi
Since this drops supports for a target, I'd like somebody to tag `relnotes` label to this PR.
Some other issues:
* The tidy exception for `cloudabi` crate is still remained because
* `parking_lot v0.9.0` and `parking_lot v0.10.2` depends on `cloudabi v0.0.3`.
* `parking_lot v0.11.0` depends on `cloudabi v0.1.0`.
[no]: https://github.com/NuxiNL/cloudabi#note-this-project-is-unmaintained
Stabilize `IpAddr::is_ipv4` and `is_ipv6` as const
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `std::net::IpAddr` as const, in the same way as [PR#76198](https://github.com/rust-lang/rust/pull/76198).
Possible because of the recent stabilization of const control flow.
Part of #76225 and #76205.
Insta-stabilize the methods `is_ipv4` and `is_ipv6` of `IpAddr`.
Possible because of the recent stabilization of const control flow.
Also adds a test for these methods in a const context.
Do what write does and optimize for the most likely case:
slices are much smaller than the buffer. If a slice does not fit
completely in the remaining capacity of the buffer, it is left out
rather than buffered partially. Special treatment is only left for
oversized slices that are written directly to the underlying writer.
Now that BufWriter always claims to support vectored writes,
look through it at the wrapped writer to decide whether to
use vectored writes for LineWriter.
If the underlying writer does not support efficient vectored output,
do it differently: always try to coalesce the slices in the buffer
until one comes that does not fit entirely. Flush the buffer before
the first slice if needed.
Stabilize clamp
Tracking issue: https://github.com/rust-lang/rust/issues/44095
Clamp has been merged and unstable for about a year and a half now. How do we feel about stabilizing this?
std: Update the bactrace crate submodule
This commit updates the `library/backtrace` submodule which primarily
pulls in support for split-debuginfo on macOS, avoiding the need for
`dsymutil` to get run to get line numbers and filenames in backtraces.
rustc_expand: Mark inner `#![test]` attributes as soft-unstable
Custom inner attributes are feature gated (https://github.com/rust-lang/rust/issues/54726) except for attributes having name `test` literally, which are not gated for historical reasons.
`#![test]` is an inner proc macro attribute, so it has all the issues described in https://github.com/rust-lang/rust/issues/54726 too.
This PR gates it with the `soft_unstable` lint.
This commit updates the `library/backtrace` submodule which primarily
pulls in support for split-debuginfo on macOS, avoiding the need for
`dsymutil` to get run to get line numbers and filenames in backtraces.
unix/weak: pass arguments to syscall at the given type
Given that we know the type the argument should have, it seems a bit strange not to use that information.
r? `@m-ou-se` `@cuviper`
Add lint for panic!("{}")
This adds a lint that warns about `panic!("{}")`.
`panic!(msg)` invocations with a single argument use their argument as panic payload literally, without using it as a format string. The same holds for `assert!(expr, msg)`.
This lints checks if `msg` is a string literal (after expansion), and warns in case it contained braces. It suggests to insert `"{}", ` to use the message literally, or to add arguments to use it as a format string.
This lint is also a good starting point for adding warnings about `panic!(not_a_string)` later, once [`panic_any()`](https://github.com/rust-lang/rust/pull/74622) becomes a stable alternative.
Fix typo in `std::io::Write` docs
These referred to a “`Write`er”—extra *e*. Presumably a copy-paste
holdover from “`Read`er”.
Test Plan:
Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results.
wchargin-branch: io-write-docs
Tighten the bounds on atomic Ordering in std::sys::unix::weak::Weak
This moves reading this from multiple SeqCst reads to Relaxed read + Acquire fence if we are actually going to use the data.
Would love to avoid the Acquire fence, but doing so would need Ordering::Consume, which neither Rust, nor LLVM supports (a shame, since this fence is hardly free on ARM, which is what I was hoping to improve).
r? ``@Amanieu`` (Sorry for always picking you, but I know a lot of people wouldn't feel comfortable reviewing atomic ordering changes)
linux: try to use libc getrandom to allow interposition
We'll try to use a weak `getrandom` symbol first, because that allows
things like `LD_PRELOAD` interposition. For example, perf measurements
might want to disable randomness to get reproducible results. If the
weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
Updated the list of white-listed target features for x86
This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and [adds all that are detectable at run-time in Rust stable as of 1.27.0](https://github.com/rust-lang/stdarch/blob/master/crates/std_detect/src/detect/arch/x86.rs).
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
The reference for LLVM's feature names used is [this file](https://github.com/llvm/llvm-project/blob/master/llvm/include/llvm/Support/X86TargetParser.def).
This PR was motivated as the compiler end's part for allowing #67329 to be adressed over on rust-lang/stdarch
These referred to a “`Write`er”—extra *e*. Presumably a copy-paste
holdover from “`Read`er”.
Test Plan:
Running ``git grep '`\?[Ww]rite`\?er'`` no longer finds any results.
wchargin-branch: io-write-docs
Rollup of 9 pull requests
Successful merges:
- #77939 (Ensure that the source code display is working with DOS backline)
- #78138 (Upgrade dlmalloc to version 0.2)
- #78967 (Make codegen tests compatible with extra inlining)
- #79027 (Limit storage duration of inlined always live locals)
- #79077 (document that __rust_alloc is also magic to our LLVM fork)
- #79088 (clarify `span_label` documentation)
- #79097 (Code block invalid html tag lint)
- #79105 (std: Fix test `symlink_hard_link` on Windows)
- #79107 (build-manifest: strip newline from rustc version)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
std: Fix test `symlink_hard_link` on Windows
The test was introduced in https://github.com/rust-lang/rust/pull/78026 and fails depending on Windows version and admin rights.
Other similar tests check for symlink creation permissions before doing anything, this PR performs the same check for `symlink_hard_link` as well.
Upgrade dlmalloc to version 0.2
In preparation of adding dynamic memory management support for SGXv2-enabled platforms, the dlmalloc crate has been refactored. More specifically, support has been added to implement platform specification outside of the dlmalloc crate. (see https://github.com/alexcrichton/dlmalloc-rs/pull/15)
This PR upgrades dlmalloc to version 0.2 for the `wasm` and `sgx` targets.
As the dlmalloc changes have received a positive review, but have not been merged yet, this PR contains a commit to prevent tidy from aborting CI prematurely.
cc: `@jethrogb`
Make the libstd build script smaller
Of all sysroot crates currently only compiler_builtins, miniz_oxide and std require a build script. compiler_builtins uses to conditionally enable certain features and possibly compile a C version ([source](63ccaf11f0/build.rs)), miniz_oxide only uses it to detect if liballoc is supported as the MSRV is 1.34.0 instead of the 1.36.0 which stabilized liballoc ([source](28514ec09f/miniz_oxide/build.rs)). std now only uses it to enable `freebsd12` when the `RUST_STD_FREEBSD_12_ABI` env var is set, to determine if `restricted-std` should be set, to set the `STD_ENV_ARCH` env var identical to `CARGO_CFG_TARGET_ARCH`, and to unconditionally enable `backtrace_in_libstd`.
If all build scripts were to be removed, it would be possible for rustc to completely compile it's own sysroot. It currently requires a rustc version that already has an available libstd to compile the build scripts. If rustc can completely compile it's own sysroot, rustbuild could be simplified to not forcefully use the bootstrap compiler for build scripts.
`@rustbot` modify labels: +T-compiler +libs-impl
We'll try to use a weak `getrandom` symbol first, because that allows
things like `LD_PRELOAD` interposition. For example, perf measurements
might want to disable randomness to get reproducible results. If the
weak symbol is not found, we fall back to a raw `SYS_getrandom` call.
