The code takes a prefix of the MD5 hash of the version string.
Since the hash command differs across GNU and BSD platforms, we scan for
the right one in the configure script.
Closes#25007
Then, decouple the question of whether the compiler/stdlib carry
debuginfo (which is controlled via `--enable-debuginfo` and implied by
`--enable-debug`) from the question of whether the tests carry
debuginfo (which now no longer is implied by `--enable-debug` nor
`--enable-debuginfo`, and is off by default).
These commits build on [some great work on reddit](http://www.reddit.com/r/rust/comments/33boew/weekend_experiment_link_rust_programs_against/) for adding MUSL support to the compiler. This goal of this PR is to enable a `--target x86_64-unknown-linux-musl` argument to the compiler to work A-OK. The outcome here is that there are 0 compile-time dependencies for a MUSL-targeting build *except for a linker*. Currently this also assumes that MUSL is being used for statically linked binaries so there is no support for dynamically linked binaries with MUSL.
MUSL support largely just entailed munging around with the linker and where libs are located, and the major highlights are:
* The entirety of `libc.a` is included in `liblibc.rlib` (statically included as an archive).
* The entirety of `libunwind.a` is included in `libstd.rlib` (like with liblibc).
* The target specification for MUSL passes a number of ... flavorful options! Each option is documented in the relevant commit.
* The entire test suite currently passes with MUSL as a target, except for:
* Dynamic linking tests are all ignored as it's not supported with MUSL
* Stack overflow detection is not working MUSL yet (I'm not sure why)
* There is a language change included in this PR to add a `target_env` `#[cfg]` directive. This is used to conditionally build code for only MUSL (or for linux distros not MUSL). I highly suspect that this will also be used by Windows to target MSVC instead of a MinGW-based toolchain.
To build a compiler targeting MUSL you need to follow these steps:
1. Clone the current MUSL repo from `git://git.musl-libc.org/musl`. Build this as usual and install it.
2. Clone and build LLVM's [libcxxabi](http://libcxxabi.llvm.org/) library. Only the `libunwind.a` artifact is needed. I have tried using upstream libunwind's source repo but I have not gotten unwinding to work with it unfortunately. Move `libunwind.a` adjacent to MUSL's `libc.a`
3. Configure a Rust checkout with `--target=x86_64-unknown-linux-musl --musl-root=$MUSL_ROOT` where `MUSL_ROOT` is where you installed MUSL in step 1.
I hope to improve building a copy of libunwind as it's still a little sketchy and difficult to do today, but other than that everything should "just work"! This PR is not intended to include 100% comprehensive support for MUSL, as future modifications will probably be necessary.
There were a few test cases to fix:
* Dynamic libraries are not supported with MUSL right now, so all of those
related test which force or require dylibs are ignored.
* Looks like the default stack for MUSL is smaller than glibc, so a few stack
allocations in benchmarks were boxed up (shouldn't have a perf impact).
* Some small linkage tweaks here and there
* Out-of-stack detection does not currently work with MUSL
This commit adds support to the makefiles, configuration script, and build
system to understand MUSL. This is broken up into a few parts:
* Any target of the form `*-musl` requires the `--musl-root` option to
`./configure` which will indicate the root of the MUSL installation. It is
also expected that there is a libunwind build inside of that installation
built against that MUSL.
* Objects from MUSL are copied into the build tree for Rust to be statically
linked into the appropriate Rust library.
* Objects for binary startup and shutdown are included in each Rust installation
by default for MUSL. This requires MUSL to only be installed on the machine
compiling rust. Only a linker will be necessary for compiling against MUSL on
a target machine.
Eventually a MUSL and/or libunwind build may be integrated by default into the
build but for now they are just always assumed to exist externally.
In most places in mk/tests.mk, it's positioned after rpass-full and
before cfail-full (because rfail comes before cfail). The order of tests
seems a little inconsistent, but reordering everywhere would obscure this
commit.
This required fixing the `pretty-rpass-full` tests to have the same `$$(CSREQ$(1)_T_$(2)_H_$(3))` dependencies as the `rpass-full` and `cfail-full` tests. It also required fixing the `run-make/simd-ffi` test to use unique names for its output files.
The current code attempts to define the
PRETTY_DEPS$(1)_H_$(3)_pretty-rpass-full variable, which does not work,
because $(1) and $(3) are not inside a function. Moreover, there is a test
(run-pass-fulldeps/compiler-calls.rs) that uses rustc_driver, which is not
an indirect dependency of librustc or libsyntax. Listing all the
dependencies will be hard to maintain, but there's a better way to do
this...
As with the rpass-full and cfail-full tests, add dependencies using the
$$(CSREQ$(1)_T_$(3)_H_$(3)) variable, which includes the complete set of
host and target crates, built for a particular stage and host. We use
T_$(3), not T_$(2), because we only build LLVM for host triples (not
target triples), so we can only build rustc_llvm for host triples. The
fulldeps tests that use plugins need host rustc crates, whereas fulldeps
tests that link against rustc and run should be skipped for
cross-compilation (such as Android).
Fixes#22021
Instead of rustc-1.0.0-beta-$triple.tar.gz, betas will be named
rustc-beta-$triple.tar.gz. This will give betas a stable download
URL, prevent old artifacts from accumulating in the dist server's
root directory, and not require the website to be updated every
beta.
As a tradeoff, it will be harder to download previous betas because
they will need to be located in the archives.
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
This commit series starts out with more official test harness support for rustdoc tests, and then each commit afterwards adds a test (where appropriate). Each commit should also test and finish independently of all others (they're all pretty separable).
I've uploaded a [copy of the documentation](http://people.mozilla.org/~acrichton/doc/std/) generated after all these commits were applied, and a double check on issues being closed would be greatly appreciated! I'll also browse the docs a bit and make sure nothing regressed too horribly.
This commit ceases documentation-by-default of crates such as `term`,
`serialize`, and `alloc`. Crates like `term` and `rand` have duplicates on
`crates.io` and the search index entries generated in the local tree end up
only leading to confusion. Crates like the entire compiler infrastructure,
`flate`, or `rbml` don't need to be documented in such a prominent location.
This change also means that doc tests will no longer be run for crates beyond
the facade (e.g. `serialize` or `term`), but there were very few doc tests in
there to begin with.
Closes#22168
Add a new test directory called 'rustdoc' where all files inside are documented
and run against the `htmldocck` script to have assertions about the output.
Rationale for this, is that I lurked `ulimit -c unlimited` into my .profile to debug an unrelated crash, that I kept forgetting to set before hand. I then ran the test suite and discovered that I had 150 gigs of core dumps in `/cores`.
Very open to another approach, or to setting the limit to something higher than 0, but I think it would be nice if the build system tried to save you from yourself here.
This saves a bunch of a time and will make distributions smaller, as well as
avoiding filling the implementors page with internal garbage. Turn it back on
with `--enable-compiler-docs` if you want them.
(Crates behind the facade are not documented at all)
[breaking-change]
This saves a bunch of a time and will make distributions smaller, as well as
avoiding filling the implementors page with internal garbage. Turn it back on
with `--enable-compiler-docs` if you want compiler docs during development.
Crates behind the facade are only documented on nightly/dev builds (where they
can be used).
[breaking-change]
Closes#23772Closes#21297
The RUST_TARGET_STAGE_N rule uses LLVM_LIBDIR_RUSTFLAGS_<target-triple>,
which expands to -L "$(llvm-config --libdir)" when the target-triple is
also a host-triple. Rather than expand to -L "" if llvm-config has not yet
been built, add a dependency on the target llvm-config.
When the target-triple is not a host-triple, the new LLVM_CONFIG_$(2)
dependency should expand to nothing.
r? alexcrichton
The RUST_TARGET_STAGE_N rule uses LLVM_LIBDIR_RUSTFLAGS_<target-triple>,
which expands to -L "$(llvm-config --libdir)" when the target-triple is
also a host-triple. Rather than expand to -L "" if llvm-config has not yet
been built, add a dependency on the target llvm-config.
When the target-triple is not a host-triple, the new LLVM_CONFIG_$(2)
dependency should expand to nothing.
LLVM_LIBDIR_<triple> is only defined for host triples, not target triples.
FWIW, the same is true for LLVM_STDCPP_RUSTFLAGS_<triple>, where we
explicitly define it as empty when --enable-llvm-static-stdcpp is not
specified, but it's still undefined for cross-compiled triples.
This commit is an implementation of [RFC 563][rfc] which adds a new
`cfg(debug_assertions)` directive which is specially recognized and calculated
by the compiler. The flag is turned off at any optimization level greater than 1
and may also be explicitly controlled through the `-C debug-assertions`
flag.
[rfc]: https://github.com/rust-lang/rfcs/pull/563
The `debug_assert!` and `debug_assert_eq!` macros now respect this instead of
the `ndebug` variable and `ndebug` no longer holds any meaning to the standard
library.
Code which was previously relying on `not(ndebug)` to gate expensive code should
be updated to rely on `debug_assertions` instead.
Closes#22492
[breaking-change]
This commit deprecates the majority of std::old_io::fs in favor of std::fs and
its new functionality. Some functions remain non-deprecated but are now behind a
feature gate called `old_fs`. These functions will be deprecated once
suitable replacements have been implemented.
The compiler has been migrated to new `std::fs` and `std::path` APIs where
appropriate as part of this change.
Strategy: If the end goal is to touch e.g. `stamp.std`, then we first
touch `stamp.std.start_time` before doing anything else. Then when
the receipe finishes, we touch `stamp.std` using the timestamp from
`stamp.std.start_time` as the reference time, and remove
`stamp.std.start_time`.
Fix#6518.
This pulls out the implementations of most built-in lints into a
separate crate, to reduce edit-compile-test iteration times with
librustc_lint and increase parallelism. This should enable lints to be
refactored, added and deleted much more easily as it slashes the
edit-compile cycle to get a minimal working compiler to test with (`make
rustc-stage1`) from
librustc -> librustc_typeck -> ... -> librustc_driver ->
libcore -> ... -> libstd
to
librustc_lint -> librustc_driver -> libcore -> ... libstd
which is significantly faster, mainly due to avoiding the librustc build
itself.
The intention would be to move as much as possible of the infrastructure
into the crate too, but the plumbing is deeply intertwined with librustc
itself at the moment. Also, there are lints for which diagnostics are
registered directly in the compiler code, not in their own crate
traversal, and their definitions have to remain in librustc.
This is a [breaking-change] for direct users of the compiler APIs:
callers of `rustc::session::build_session` or
`rustc::session::build_session_` need to manually call
`rustc_lint::register_builtins` on their return value.
This should make #22206 easier.
After making `rustc` fail on errors at a stop point, like `-Z parse-only`, in #22117, the files in this PR also fail during the parse stage and should be moved as well. Sorry for spliting this move up in two PRs.
- Now "make check-stage2-T-aarch64-linux-android-H-x86_64-unknown-linux-gnu" works (#21773)
- Fix & enable debuginfo tests for android (#10381)
- Fix & enable more tests for android (both for arm/aarch64)
- Enable many already-pass tests on android (both for arm/aarch64)
`cp -a` is a GNU extension. Use an alternate combinaison of POSIX options
(`-PRp`) that do nearly the same.
The difference is `-a` will preserve context, links and xattr attributes,
whereas `-p` not. But as we use it only for copy a file, there is no
difference in the current context.
This is a patch for #22291.
PLEASE_BENCH=1 adds --bench to the arguments passed to the executable to be tested. At the moment, compiletest does not accept a --bench argument, because it is not needed for any test in src/test/, even the tests in src/test/bench do not use #[bench].
I have updated the makefile to only add the --bench flag for crate tests. I do not think that changing compiletest add --bench to the run arguments of all compile tests makes sense, because it would mess up tests which check command line arguments. Also the bench option can be added as comment in a compile test as well.
Highlights:
* Adds an 'uninstall.sh' script to `/usr/local/lib/rustlib/uninstall.sh`, the path to which is printed during installation.
* Components can be deselected during install, like `install.sh --without=rust-docs`.
* Components can be listed with `install.sh --list-components`.
* Vastly reduces spew during install (but supporting a `--verbose` option).
Typicall install run looks like:
```
brian@brianX1:~/dev/multirust⟫ sudo ./install.sh
[sudo] password for brian:
install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh
install: installing component 'rustc'
install: installing component 'cargo'
install: installing component 'rust-docs'
Rust is ready to roll.
```
Needs to be merged right before corresponding PRs to cargo and rust-packaging.
Fixes https://github.com/rust-lang/rust/issues/21117
Fixes https://github.com/rust-lang/rust/issues/20283
`cp -a` is a GNU extension. Use an alternate combinaison of POSIX options
(`-PRp`) that do nearly the same.
The difference is `-a` will preserve context, links and xattr attributes,
whereas `-p` not. But as we use it only for copy a file, there is no
difference in the current context.
This restructures tidy.py to walk the tree itself,
and improves performance considerably by not loading entire
files into buffers for licenseck.
Splits build rules into 'tidy', 'tidy-basic', 'tidy-binaries',
'tidy-errors', 'tidy-features'.
This adds a new lexer/parser combo for the entire Rust language can be generated with with flex and bison, taken from my project at https://github.com/bleibig/rust-grammar. There is also a testing script that runs the generated parser with all *.rs files in the repository (except for tests in compile-fail or ones that marked as "ignore-test" or "ignore-lexer-test"). If you have flex and bison installed, you can run these tests using the new "check-grammar" make target.
This does not depend on or interact with the existing testing code in the grammar, which only provides and tests a lexer specification.
OS X users should take note that the version of bison that comes with the Xcode toolchain (2.3) is too old to work with this grammar, they need to download and install version 3.0 or later.
The parser builds up an S-expression-based AST, which can be displayed by giving the "-v" argument to parser-lalr (normally it only gives output on error). It is only a rough approximation of what is parsed and doesn't capture every detail and nuance of the program.
Hopefully this should be sufficient for issue #2234, or at least a good starting point.
The regex library was largely used for non-critical aspects of the compiler and
various external tooling. The library at this point is duplicated with its
out-of-tree counterpart and as such imposes a bit of a maintenance overhead as
well as compile time hit for the compiler itself.
The last major user of the regex library is the libtest library, using regexes
for filters when running tests. This removal means that the filtering has gone
back to substring matching rather than using regexes.
Initial support for aarch64-linux-android (#18920)
- Add new configuration files
- Modify some options to compile & link succesfully.
(PIE, disable tls on jemalloc, modify some external function linkage, ..)
- To build, refer to https://github.com/rust-lang/rust/wiki/Doc-building-for-android.
(tested with platform=21 and toolchain=aarch64-linux-android-4.9)
This does the bare minimum to make registration of error codes work again. After this patch, every call to `span_err!` with an error code gets that error code validated against a list in that crate and a new tidy script `errorck.py` validates that no error codes are duplicated globally.
There are further improvements to be made yet, detailed in #19624.
r? @nikomatsakis
Removed use of unused LDPATH variable on Windows as is done for other platforms, and added GCC flag to ensure MINGW's ANSI compatible STDIO functions are used wherever available (required by jemalloc).
Without these changes it ends up setting the PATH twice, and the second time the PATH begins with `:` which is invalid. Also the regular msvcrt printf-like functions would be used which don't understand stuff like %hhd and %z which jemalloc uses.
This change ought not to make any difference to the output but it fixes the build process for me since at least my build environment couldn't handle that broken path caused by LDPATH being empty.
The script is intended as a tool for doing every sort of verifications amenable to Rustdoc's HTML output. For example, link checkers would go to this script. It already parses HTML into a document tree form (with a slight caveat), so future tests can make use of it.
As an example, relevant `rustdoc-*` run-make tests have been updated to use `htmldocck.py` and got their `verify.sh` removed. In the future they may go to a dedicated directory with htmldocck running by default. The detailed explanation of test scripts is provided as a docstring of htmldocck.
cc #19723
The script is intended as a tool for doing every sort of verifications
amenable to Rustdoc's HTML output. For example, link checkers would go
to this script. It already parses HTML into a document tree form (with
a slight caveat), so future tests can make use of it.
As an example, relevant `rustdoc-*` run-make tests have been updated
to use `htmldocck.py` and got their `verify.sh` removed. In the future
they may go to a dedicated directory with htmldocck running by default.
The detailed explanation of test scripts is provided as a docstring of
htmldocck.
cc #19723
In accordance with [collections reform part 2][rfc] this macro has been moved to
an external [bitflags crate][crate] which is [available though
crates.io][cratesio]. Inside the standard distribution the macro has been moved
to a crate called `rustc_bitflags` for current users to continue using.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0509-collections-reform-part-2.md
[crate]: https://github.com/rust-lang/bitflags
[cratesio]: http://crates.io/crates/bitflags
The major user of `bitflags!` in terms of a public-facing possibly-stable API
today is the `FilePermissions` structure inside of `std::io`. This user,
however, will likely no longer use `bitflags!` after I/O reform has landed. To
prevent breaking APIs today, this structure remains as-is.
Current users of the `bitflags!` macro should add this to their `Cargo.toml`:
bitflags = "0.1"
and this to their crate root:
#[macro_use] extern crate bitflags;
Due to the removal of a public macro, this is a:
[breaking-change]
Originally, this was going to be discussed and revisted, however I've been working on this for months, and a rebase on top of master was about 1 flight's worth of work so I just went ahead and did it.
This gets you as far as being able to target powerpc with, eg:
LD_LIBRARY_PATH=./x86_64-unknown-linux-gnu/stage2/lib/ x86_64-unknown-linux-gnu/stage2/bin/rustc -C linker=powerpc-linux-gnu-gcc --target powerpc-unknown-linux-gnu hello.rs
Would really love to get this out before 1.0. r? @alexcrichton
There is likely to be new users with the alpha release, and there are a lot of documents on the internet (StackOverflow, reddit, blogs) that refer to these guides, so emitting a more helpful error than "404" is nice. Hence, I've temporarily reinstated stub documents for each of the old guides, referring to as relevant a part of the book as possible.
Also, rustbook was silently ignoring some errors, which lead to an inconsistency with directory creation/file writing. This meant the CSS file was not being written if no `doc` directory existed in the users build dir (e.g. the buildbots). This should mean that the CSS will appear automatically in later builds.
Without this, rustbook was failing because it was expecting the
directory to exist. (Previously, rustbook was just silently failing to
install the CSS files due to this.)
There are hundreds of stackoverflow answers, reddit posts and blog
articles that link to these documents, so it's a nicer user experience
if they're not plain 404s.
The intention is to let these hang around only for relatively short
while. The alpha is likely to bring in many new users and they will be
reading the documents mentioned above.
This pulls all of our long-form documentation into a single document,
nicknamed "the book" and formally titled "The Rust Programming
Language."
A few things motivated this change:
* People knew of The Guide, but not the individual Guides. This merges
them together, helping discoverability.
* You can get all of Rust's longform documentation in one place, which
is nice.
* We now have rustbook in-tree, which can generate this kind of
documentation. While its style is basic, the general idea is much
better: a table of contents on the left-hand side.
* Rather than a almost 10,000-line guide.md, there are now smaller files
per section.
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system to a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes#16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
After 8b3c67690c the `make install`
command fails if docs are not disabled through CFG_DISABLE_DOCS,
because now the `install` target uses
../../tmp/dist/$(DOC_PKG_NAME)-$(CFG_BUILD)/install.sh
Instead of explicitly depending on
dist/$(PKG_NAME)-$(CFG_BUILD).tar.gz, the `prepare_[un]install`
targets now depend on `dist-tar-bins`, which packages the appropriate
dist archives depending on the configuration.
This removes a large array of deprecated functionality, regardless of how
recently it was deprecated. The purpose of this commit is to clean out the
standard libraries and compiler for the upcoming alpha release.
Some notable compiler changes were to enable warnings for all now-deprecated
command line arguments (previously the deprecated versions were silently
accepted) as well as removing deriving(Zero) entirely (the trait was removed).
The distribution no longer contains the libtime or libregex_macros crates. Both
of these have been deprecated for some time and are available externally.
After 8b3c67690c the `make install`
command fails if docs are not disabled through CFG_DISABLE_DOCS,
because now the `install` target uses
../../tmp/dist/$(DOC_PKG_NAME)-$(CFG_BUILD)/install.sh
In 714a2c678c the `prepare_install`
target wwas changed to conditionally depend also on the doc archive,
but did not modify `prepare_uninstall`.
Instead of explicitly depending on
dist/$(PKG_NAME)-$(CFG_BUILD).tar.gz, the `prepare_[un]install`
targets now depend on `dist-tar-bins`, which packages the appropriate
dist archives depending on the configuration.
Adds a new 'beta cycle' variable that can be appended to the '-beta' version label, e.g. '-beta1'. Changes the version label for the beta channel temporarily to 'alpha'. Changes the artifact name of the beta channel to contain the version number instead of just being called 'beta'. The beta cycle number is currently set to 1.
The impact of this is that the first alphas will be called '1.0.0-alpha1' and the artifacts will also be called '1.0.0-alpha1-*.tar.gz'. We could alternately leave out the cycle number if we are confident there will be only one alpha cycle.
r? @alexcrichton cc @nikomatsakis @huonw
This distributes docs in a separate package called rust-docs. The rust-packaging
project will combine it with Rust and Cargo into a single installer in a variety of formats.
I would like to look into some issues related to the model lexer #15883.
I stumbled upon 2 minor problems when I tried running the lexer tests:
* antlr did not put the generated files in the correct directory
* grammer/verify.rs did not work with the most recent version of rust
With these changes (and setting CLASSPATH=/usr/share/java/antlr-4.4-complete.jar:$CLASSPATH) I was able to execute the tests.
Note that I just fixed the syntax errors and added `None` as 2. argument of `Literal`. I am not sure if this is correct however. I still have to take a closer look at what verify.rs actually does. Are there any helpful pointers?
These crates are all deprecated for their rust-lang/$crate equivalents and by
generating docs we're generating broken links. The documentation for these
crates are generated out-of-tree and are managed separately, so we're not losing
the documentation altogether, just the links from the main distribution's docs.
Closes#20096
It's quite possible that small programs don't use all of jemalloc, and building
with -ffunction-sections and -fdata-sections allows the linker (via
--gc-sections) to strip out all unused code at link time. This decreases the
size of a "hello world" executable for me from 716K to 482K with no measurable
impact on link time. After this patch jemalloc is still the largest portion of
our hello world executables, but this helps cut down on the size at least
somewhat!
It's quite possible that small programs don't use all of jemalloc, and building
with -ffunction-sections and -fdata-sections allows the linker (via
--gc-sections) to strip out all unused code at link time. This decreases the
size of a "hello world" executable for me from 716K to 482K with no measurable
impact on link time. After this patch jemalloc is still the largest portion of
our hello world executables, but this helps cut down on the size at least
somewhat!
In the HTML version of the documentation, it isn't rendered so might as well use the unicode representation.
Part of the problem was that putting a math unicode character wasn't
rendering properly in the pdf, so extra steps were needed to define
the unicode charecter ⊥ in reference.tex
closes#15285
This commit merges the `rustrt` crate into `std`, undoing part of the
facade. This merger continues the paring down of the runtime system.
Code relying on the public API of `rustrt` will break; some of this API
is now available through `std::rt`, but is likely to change and/or be
removed very soon.
[breaking-change]
If you configure with `--disable-docs`, the `doc` directory does not get generated, so
`cp -r doc dist/` fails when you `make dist{,-tar-bins,-doc}` or `make install`
Fix `make TAGS.emacs`.
@nikomatsakis has been complaining to me about this. (I had not noticed since I drive `ctags` with a separate script.)
(Suitable for a rollup build.)
Makes a couple changes that support the implementation of a REPL:
* Implementation of wrapper code for LLVM ExecutionEngine API
* Fixing a change I made earlier to reset compiler state in `phase_1_[...]`
instead of `compile_input` as the latter is not used in a REPL
- Support gcc-less installation on Windows. To do so in unattended mode run:`<intaller>.exe /TYPE=compact /SILENT`.
- Do not require admin privileges to install.
cc #19519
This is a work in progress, but this should get *extensive* review, so I'm putting it up early and often.
This is the start of a draft of the new 'ownership guide,' which explains ownership, borrowing, etc. I'm feeling better about this framing than last time's, but we'll see.
I stumbled across this today, and it's not really working. It's been around for a very, very long time, and seems to be based on stuff we don't even have anymore.
I asked in `#rust-internals`, and @cmr said we should just kill it, so here I am. :) I don't think that anything else uses Java, but maybe I missed something.
And if this _isn't_ what we want, I'm fine with closing too. Just some housekeeping.
This patch merges the `libsync` crate into `libstd`, undoing part of the
facade. This is in preparation for ultimately merging `librustrt`, as
well as the upcoming rewrite of `sync`.
Because this removes the `libsync` crate, it is a:
[breaking-change]
However, all uses of `libsync` should be able to reroute through
`std::sync` and `std::comm` instead.
This is a collection of misc issues I've run into while adding bindir & libdir support that aren't really bindir & libdir specific.
While I continue to fiddle with bindir and libdir bugs, I figured these might be useful for others to have merged.
Right now we'll end up globbing them into the accepted targets and (ever worse) they will override the make variables of real target files because we `include`d everything in that directory.
As a side effect, editors get a better hint on file types.
Fixies #11671
This commit changes default relative libdir 'lib' to a relative libdir calculated using LIBDIR provided by --libdir configuration option. In case if no option was provided behavior does not change.
We add CFG_LLVM_TARGET_$(target) (which can be defined in any of the
mk/cfg/* files) and supply a default to the plain target name
CFG_LLVM_TARGET mirrors the value of llvm_target (aka llvm-target) in
the librustc_back runtime target specification.
Without this, if we we're using a non-standard host libdir, the target
bindir would not exist (and rustc would fail to write to the
non-existent directory).
If the expected rustc snapshot is not where we expect it to be,
complain and fail at that point rather than creating a empty rustc file
and continuing until we try to run it.
Futureproof Rust for fancier suffixed literals. The Rust compiler tokenises a literal followed immediately (no whitespace) by an identifier as a single token: (for example) the text sequences `"foo"bar`, `1baz` and `1u1024` are now a single token rather than the pairs `"foo"` `bar`, `1` `baz` and `1u` `1024` respectively.
The compiler rejects all such suffixes in the parser, except for the 12 numeric suffixes we have now.
I'm fairly sure this will affect very few programs, since it's not currently legal to have `<literal><identifier>` in a Rust program, except in a macro invocation. Any macro invocation relying on this behaviour can simply separate the two tokens with whitespace: `foo!("bar"baz)` becomes `foo!("bar" baz)`.
This implements [RFC 463](https://github.com/rust-lang/rfcs/blob/master/text/0463-future-proof-literal-suffixes.md), and so closes https://github.com/rust-lang/rust/issues/19088.
Now that we've done `fail` -> `panic`, I feel bringing back the error handling guide is a good idea. We had one long ago, but it was removed when conditions were removed.
This doesn't cover the new FromError stuff, but I feel like it's already useful in this state, so I'm sending this PR now.
- CFG_CFLAGS is gone (it was previously only used by jemalloc anyhow).
- CFG_JEMALLOC_CFLAGS may contain flags needed for the compiler to
function (produce a binary output).
- jemalloc's configure runs $(CC) without EXTRA_CFLAGS, and (without
this change) will fail if any flags are required for CC to work.
not in hardcoded libdir path. If there was no LIBDIR provided
during configuration fallback to hardcoded paths.
Thanks to Jan Niklas Hasse for solution and to Alex Crichton for improvements.
Closes#11671
Commit bec2ee77f7 started quoting paths
discovered as part of the `probe` function, which includes git. The
`make` `wildcard` function appears to be incompatible with quoted
paths so this check in the makefile now fails. Employing `wildcard`
here appears to only re-verify that git actually exists, which the
configure script already did, so I've just removed it.
Additionally, with the quoted paths the `subst` function should no
longer be needed, so I've removed it as well.
Closes#18771
1. Introduce `putpathvar` function that prints variable shell-quoted by using `%q` format specifier. This function is used within `probe` to save the result into `config.tmp`.
2. Removes search-and-replace pattern that transforms `\` into `/` as it messes up shell-quoted strings.
To make progress on #18585 we're paring down the distribution to theoretically
"only libstd", and this commit makes progress on this by removing the rlibc
crate from the distribution.
The crate has now been moved into an external cargo package located in the rust
lang organization [1]. This is a breaking change due to this removal, and
existing crates depending on `rlibc` should use the Cargo crate instead.
[1]: https://github.com/rust-lang/rlibc
[breaking-change]
cc #18585
Right now the windows nightlies are failing because they're encountering a
linker error when producing stage3 libs. The stage3 libs aren't actually used in
general, and we primarily just want to generate a static stage3 binary, not
static stage3 dylibs.
If a dylib is being produced, the compiler will now first check to see if it can
be created entirely statically before falling back to dynamic dependencies. This
behavior can be overridden with `-C prefer-dynamic`.
Due to the alteration in behavior, this is a breaking change. Any previous users
relying on dylibs implicitly maximizing dynamic dependencies should start
passing `-C prefer-dynamic` to compilations.
Closes#18499
[breaking-change]
Removes all target-specific knowledge from rustc. Some targets have changed
during this, but none of these should be very visible outside of
cross-compilation. The changes make our targets more consistent.
iX86-unknown-linux-gnu is now only available as i686-unknown-linux-gnu. We
used to accept any value of X greater than 1. i686 was released in 1995, and
should encompass the bare minimum of what Rust supports on x86 CPUs.
The only two windows targets are now i686-pc-windows-gnu and
x86_64-pc-windows-gnu.
The iOS target has been renamed from arm-apple-ios to arm-apple-darwin.
A complete list of the targets we accept now:
arm-apple-darwin
arm-linux-androideabi
arm-unknown-linux-gnueabi
arm-unknown-linux-gnueabihf
i686-apple-darwin
i686-pc-windows-gnu
i686-unknown-freebsd
i686-unknown-linux-gnu
mips-unknown-linux-gnu
mipsel-unknown-linux-gnu
x86_64-apple-darwin
x86_64-unknown-freebsd
x86_64-unknown-linux-gnu
x86_64-pc-windows-gnu
Closes#16093
[breaking-change]
If a dylib is being produced, the compiler will now first check to see if it can
be created entirely statically before falling back to dynamic dependencies. This
behavior can be overridden with `-C prefer-dynamic`.
Due to the alteration in behavior, this is a breaking change. Any previous users
relying on dylibs implicitly maximizing dynamic dependencies should start
passing `-C prefer-dynamic` to compilations.
Closes#18499
[breaking-change]
When building for multiple targets, the initial 'make' invocation
always fails. The missing build stamp causes clean-llvm to be
invoked, but clean-llvm cleans *all* llvm builds. So what happens
is that 1) all llvm's are cleaned (a no-op), 2) llvm-${target1}
builds, 3) all llvm's are cleaned (deleting llvm-${target1}),
4) llvm-${target2} is built, 5) the remaining build for ${target1}
fails because llvm does not exist.
This makes the clean operation only clean the correct llvm build.
Should greatly reduce bot failures.
Enable parallel codegen (2 units) by default when --opt-level is 0 or 1. This
gives a minor speedup on large crates (~10%), with only a tiny slowdown (~2%)
for small ones (which usually build in under a second regardless). The current
default (no parallelization) is used when the user requests optimization
(--opt-level 2 or 3), and when the user has enabled LTO (which is incompatible
with parallel codegen).
This commit also changes the rust build system to use parallel codegen
when appropriate. This means codegen-units=4 for stage0 always, and
also for stage1 and stage2 when configured with --disable-optimize.
(Other settings use codegen-units=1 for stage1 and stage2, to get
maximum performance for release binaries.) The build system also sets
codegen-units=1 for compiletest tests (compiletest does its own
parallelization) and uses the same setting as stage2 for crate tests.
All of these crates have been deprecated for some time and properly live in the
rust-lang organization as cargo-based crates.
To update your code, depend on the rust-lang/foo repository via cargo.
[breaking-change]
When running `sudo make install`, we only want to run the actual install
as root, the building of the documentation and the distribution folder
should happen as the non-root user.
Related to #13728.
----
To reproduce issue on commit ba246100ca
it does not suffice to add just `check-build-compiletest` to
`check-secondary`; one must also ensure that `check-build-compiletest`
precedes the satisification of the `check` rule.
Otherwise hidden dependencies of `compiletest` would end up getting
satisfied when make builds `rustc` at each stage in order to
eventually run `check-stage2`.
So to handle that I moved `check-secondary` before `check` in the
`check-all` rule that bors uses, and for good measure, I also put
`check-build-compiltest` at the front of the `check-secondary` rule's
dependencies.
My understanding is that running `check-secondary` should be
relatively cheap, and thus such a reordering will not hurt bors.
----
Fix#17883.
compiletest needs to link to native crate, or at least the `rt` library.
(I tried using a dependency on `rustrt` instead, and that did not resolve the problem. But this does.)
Partially addresses #17883
The escaped newline in the middle of the variable reference breaks the
short hash substitution, leaving the link text exmpty; rewrap so that
each replacement is on its own line.
The escaped newline in the middle of the variable reference breaks the
short hash substitution, leaving the link text exmpty; rewrap so that
each replacement is on its own line.
Remove superfluous parentheses from the CTAGS_LOCATIONS expression.
Fixes the following error when executing `make TAGS.vi`:
/bin/sh: -c: line 0: syntax error near unexpected token `)'
This commit removes the libuv and gyp submodules, as well as all build
infrastructure related to them.
For more context, see the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230)
[breaking-change]
This commit removes the `librustuv` crate.
See the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230) for more context.
See [green-rs](https://github.com/alexcrichton/green-rs/) for a possible
migration path if you wish to continue using green-threaded I/O. The
library provides its own I/O API surface.
[breaking-change]
This makes the windows `make dist` target start producing binary tarballs, and tweaks install.sh so they work, in preparation for working on a combined Rust+Cargo installer.
Setting LC_ALL to C helps keep gdb's output consistent ('print' gives us expected output). This fixes#17423. I do not have access to a windows/mac machines to test this. I've only tested it on an x86_64 linux box.
Right now, libuv will **always** be built for the host system (at least when building on OSX) because the information about the cross compiler is never actually passed to GYP. I don't know how anybody has been managing to build cross compilers with this.
Note that, at least on OSX, there is a bug in GYP that will send clang flags to non-clang compilers and it will still attempt to use Xcode's libtool, so this doesn't completely fix the problem of cross-compiling on an OSX host, but it's a start.
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
This updates our build system to prefer `i686-w64-mingw32` as the 32-bit windows triple instead of `i686-pc-mingw32`. This is an interim step to make the build artifacts consistent until https://github.com/rust-lang/rust/issues/15717 is done.
The Guide isn't 100% perfect, but it's basically complete. It's
certainly better than the tutorial is. Time to start pointing more
people its way.
I also just made it consistent to call all things 'guides' rather than
tutorials.
Fixes#9874. This is the big one.
And two bugs that just go away.
Fixes#14503.
Fixes#15009.
The Guide isn't 100% perfect, but it's basically complete. It's
certainly better than the tutorial is. Time to start pointing more
people its way.
I also just made it consistent to call all things 'guides' rather than
tutorials.
Fixes#9874. This is the big one.
And two bugs that just go away.
Fixes#14503.
Fixes#15009.
gcc, ld, ar, dlltool, windres go into $(RUST)/bin/rustlib/<triple>/bin/
platform libraries and startup objects got into $(RUST)/bin/rustlib/<triple>/lib/
Bugs in pdflatex (#12804) are preventing the guide from landing (https://github.com/rust-lang/rust/pull/16657). This solves the immediate problem by changing the build system to prefer lualatex, xelatex to pdflatex (which is apparently obsolete). Because the xelatex on the snapshot bot seems to completely ignore the `-output-directory` option, I also had to frob the makefiles a bit for that case.
This builds on https://github.com/rust-lang/rust/pull/17109, putting the target triple into the installer name so that we can have both 32-bit and 64-bit.
The resulting installers will be called `rust-0.12.0-pre-x86_64-w64-mingw32.exe`, etc.
Currently `./configure --llvm-root=...` and similar flags will break incremental builds by forcing reconfiguration on every `make`. This happens because `reconfig.mk` incorrectly treats submodules in the `-` (uninitialized) state as requiring reconfiguration, and `./configure` deliberately deinitializes unneeded submodules. The fix is to reconfigure only when submodules are in the `+` state (wrong commit checked out).
The performance hit from these checks is significant, but unoptimized
builds are already incredibly slow. Enabling these checks results in
better test coverage since there are bots doing unoptimized builds, and
the cost is relatively small in the context of an unoptimized build.
This also allows using `JEMALLOC_FLAGS` to override the default
configure flags.
When running `sudo make install`, we only want to run the actual install
as root, the building of the documentation and the distribution folder
should happen as the non-root user.
Related to #13728.
Our implementation of ebml has diverged from the standard in order
to better serve the needs of the compiler, so it doesn't make much
sense to call what we have ebml anyore. Furthermore, our implementation
is pretty crufty, and should eventually be rewritten into a format
that better suits the needs of the compiler. This patch factors out
serialize::ebml into librbml, otherwise known as the Really Bad
Markup Language. This is a stopgap library that shouldn't be used
by end users, and will eventually be replaced by something better.
[breaking-change]
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
