The reasons for doing this are:
* The model on which linked failure is based is inherently complex
* The implementation is also very complex, and there are few remaining who
fully understand the implementation
* There are existing race conditions in the core context switching function of
the scheduler, and possibly others.
* It's unclear whether this model of linked failure maps well to a 1:1 threading
model
Linked failure is often a desired aspect of tasks, but we would like to take a
much more conservative approach in re-implementing linked failure if at all.
Closes#8674Closes#8318Closes#8863
There are issues with reading stdin when it is actually attached to a pipe, but
I have run into no problems in writing to stdout/stderr when they are attached
to pipes.
Explicitly have the only C++ portion of the runtime be one file with exception
handling. All other runtime files must now live in C and be fully defined in C.
There are issues with reading stdin when it is actually attached to a pipe, but
I have run into no problems in writing to stdout/stderr when they are attached
to pipes.
This commit re-organizes the io::native module slightly in order to have a
working implementation of rtio::IoFactory which uses native implementations. The
goal is to seamlessly multiplex among libuv/native implementations wherever
necessary.
Right now most of the native I/O is unimplemented, but we have existing bindings
for file descriptors and processes which have been hooked up. What this means is
that you can now invoke println!() from libstd with no local task, no local
scheduler, and even without libuv.
There's still plenty of work to do on the native I/O factory, but this is the
first steps into making it an official portion of the standard library. I don't
expect anyone to reach into io::native directly, but rather only std::io
primitives will be used. Each std::io interface seamlessly falls back onto the
native I/O implementation if the local scheduler doesn't have a libuv one
(hurray trait ojects!)
I was benchmarking rust-http recently, and I saw that 50% of its time was spent
creating buffered readers/writers. Albeit rust-http wasn't using
std::rt::io::buffered, but the same idea applies here. It's much cheaper to
malloc a large region and not initialize it than to set it all to 0. Buffered
readers/writers never use uninitialized data, and their internal buffers are
encapsulated, so any usage of uninitialized slots are an implementation bug in
the readers/writers.
I increased this to 4MB when I implemented abort-on-stack-overflow for Rust
functions. Now that the fixed_stack_segment attribute is removed, no rust
function will ever reasonably request 2MB of stack (due to calling an FFI
function).
The default size of 2MB should be plenty for everyday use-cases, and tasks can
still request more stack via the spawning API.
These two attributes are no longer useful now that Rust has decided to leave
segmented stacks behind. It is assumed that the rust task's stack is always
large enough to make an FFI call (due to the stack being very large).
There's always the case of stack overflow, however, to consider. This does not
change the behavior of stack overflow in Rust. This is still normally triggered
by the __morestack function and aborts the whole process.
C stack overflow will continue to corrupt the stack, however (as it did before
this commit as well). The future improvement of a guard page at the end of every
rust stack is still unimplemented and is intended to be the mechanism through
which we attempt to detect C stack overflow.
Closes#8822Closes#10155
I was benchmarking rust-http recently, and I saw that 50% of its time was spent
creating buffered readers/writers. Albeit rust-http wasn't using
std::rt::io::buffered, but the same idea applies here. It's much cheaper to
malloc a large region and not initialize it than to set it all to 0. Buffered
readers/writers never use uninitialized data, and their internal buffers are
encapsulated, so any usage of uninitialized slots are an implementation bug in
the readers/writers.
It appears that uv's support for interacting with a stdio stream as a tty when
it's actually a pipe is pretty problematic. To get around this, promote a check
to see if the stream is a tty to the top of the tty constructor, and bail out
quickly if it's not identified as a tty.
Closes#10237
It turns out that the uv implementation would cause use-after-free if the idle
callback was used after the call to `close`, and additionally nothing would ever
really work that well if `start()` were called twice. To change this, the
`start` and `close` methods were removed in favor of specifying the callback at
creation, and allowing destruction to take care of closing the watcher.
This binds to the appropriate pthreads_* and Windows specific functions
and calls them from Rust. This allows for removal of the C++ support
code for threads.
Fixes#10162
Right now if you're running a program with its output piped to some location and
the program decides to go awry, when you kill the program via some signal none
of the program's last 4K of output will get printed to the screen. In theory the
solution to this would be to register a signal handler as part of the runtime
which then flushes the output stream.
I believe that the current behavior is far enough from what's expected that we
shouldn't be providing this sort of "super buffering" by default when stdout
isn't attached to a tty.
This isn't quite as fancy as the struct in #9913, but I'm not sure we should be exposing crate names/hashes of the types. That being said, it'd be pretty easy to extend this (the deterministic hashing regardless of what crate you're in was the hard part).
Right now if you're running a program with its output piped to some location and
the program decides to go awry, when you kill the program via some signal none
of the program's last 4K of output will get printed to the screen. In theory the
solution to this would be to register a signal handler as part of the runtime
which then flushes the output stream.
I believe that the current behavior is far enough from what's expected that we
shouldn't be providing this sort of "super buffering" by default when stdout
isn't attached to a tty.
This renames the `file` module to `fs` because that more accurately describes
its current purpose (manipulating the filesystem, not just files).
Additionally, this adds an UnstableFileStat structure as a nested structure of
FileStat to signify that the fields should not be depended on. The structure is
currently flagged with #[unstable], but it's unlikely that it has much meaning.
Closes#10241
This adds bindings to the remaining functions provided by libuv, all of which
are useful operations on files which need to get exposed somehow.
Some highlights:
* Dropped `FileReader` and `FileWriter` and `FileStream` for one `File` type
* Moved all file-related methods to be static methods under `File`
* All directory related methods are still top-level functions
* Created `io::FilePermission` types (backed by u32) that are what you'd expect
* Created `io::FileType` and refactored `FileStat` to use FileType and
FilePermission
* Removed the expanding matrix of `FileMode` operations. The mode of reading a
file will not have the O_CREAT flag, but a write mode will always have the
O_CREAT flag.
Closes#10130Closes#10131Closes#10121
This commit moves all thread-blocking I/O functions from the std::os module.
Their replacements can be found in either std::rt::io::file or in a hidden
"old_os" module inside of native::file. I didn't want to outright delete these
functions because they have a lot of special casing learned over time for each
OS/platform, and I imagine that these will someday get integrated into a
blocking implementation of IoFactory. For now, they're moved to a private module
to prevent bitrot and still have tests to ensure that they work.
I've also expanded the extensions to a few more methods defined on Path, most of
which were previously defined in std::os but now have non-thread-blocking
implementations as part of using the current IoFactory.
The api of io::file is in flux, but I plan on changing it in the next commit as
well.
Closes#10057
The invocation for making a directory should be able to specify a mode to make
the directory with (instead of defaulting to one particular mode). Additionally,
libuv and various OSes implement efficient versions of renaming files, so this
operation is exposed as an IoFactory call.
Now that the type_id intrinsic is working across crates, all of these
unnecessary messages can be removed to have the failure type for a task truly be
~Any and only ~Any
Tests now have the same name as the test that they're running (to allow for
easier diagnosing of failure sources), and the main task is now specially named
`<main>` instead of `<unnamed>`.
Closes#10195Closes#10073
This takes the last reforms on the `Option` type and applies them to `Result` too. For that, I reordered and grouped the functions in both modules, and also did some refactorings:
- Added `as_ref` and `as_mut` adapters to `Result`.
- Renamed `Result::map_move` to `Result::map` (same for `_err` variant), deleted other map functions.
- Made the `.expect()` methods be generic over anything you can
fail with.
- Updated some doc comments to the line doc comment style
- Cleaned up and extended standard trait implementations on `Option` and `Result`
- Removed legacy implementations in the `option` and `result` module
Tests now have the same name as the test that they're running (to allow for
easier diagnosing of failure sources), and the main task is now specially named
<main> instead of <unnamed>.
Closes#10195Closes#10073
The previous method was unsound because you could very easily create two mutable
pointers which alias the same location (not sound behavior). This hides the
function which does so and then exports an explicit flush() function (with
documentation about how it works).
Cleaned up the source in a few places
Renamed `map_move` to `map`, removed other `map` methods
Added `as_ref` and `as_mut` adapters to `Result`
Added `fmt::Default` impl
The previous method was unsound because you could very easily create two mutable
pointers which alias the same location (not sound behavior). This hides the
function which does so and then exports an explicit flush() function (with
documentation about how it works).
