Use true previous lint level when detecting overriden forbids
Previously, cap-lints was ignored when checking the previous forbid level, which
meant that it was a hard error to do so. This is different from the normal
behavior of lints, which are silenced by cap-lints; if the forbid would not take
effect regardless, there is not much point in complaining about the fact that we
are reducing its level.
It might be considered a bug that even `--cap-lints deny` would suffice to
silence the error on overriding forbid, depending on if one cares about failing
the build or precisely forbid being set. But setting cap-lints to deny is quite
odd and not really done in practice, so we don't try to handle it specially.
This also unifies the code paths for nested and same-level scopes. However, the
special case for CLI lint flags is left in place (introduced by #70918) to fix
the regression noted in #70819. That means that CLI flags do not lint on forbid
being overridden by a non-forbid level. It is unclear whether this is a bug or a
desirable feature, but it is certainly inconsistent. CLI flags are a
sufficiently different "type" of place though that this is deemed out of scope
for this commit.
r? `@pnkfelix` perhaps?
cc #77713 -- not marking as "Fixes" because of the lack of proper unused attribute handling in this PR
This preserves the current lint behavior for now.
Linting after item statements currently prevents the compiler from bootstrapping.
Fixing this is blocked on fixing this upstream in Cargo, and bumping the Cargo
submodule.
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing unnecessarily
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated at nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
lint: Do not provide suggestions for non standard characters
Fixes#77273
Only provide suggestions if the case-fixed result is different than the original.
Previously, cap-lints was ignored when checking the previous forbid level, which
meant that it was a hard error to do so. This is different from the normal
behavior of lints, which are silenced by cap-lints; if the forbid would not take
effect regardless, there is not much point in complaining about the fact that we
are reducing its level.
It might be considered a bug that even `--cap-lints deny` would suffice to
silence the error on overriding forbid, depending on if one cares about failing
the build or precisely forbid being set. But setting cap-lints to deny is quite
odd and not really done in practice, so we don't try to handle it specially.
This also unifies the code paths for nested and same-level scopes. However, the
special case for CLI lint flags is left in place (introduced by #70918) to fix
the regression noted in #70819. That means that CLI flags do not lint on forbid
being overridden by a non-forbid level. It is unclear whether this is a bug or a
desirable feature, but it is certainly inconsistent. CLI flags are a
sufficiently different "type" of place though that this is deemed out of scope
for this commit.
rustc_ast: Do not panic by default when visiting macro calls
Panicking by default made sense when we didn't have HIR or MIR and everything worked on AST, but now all AST visitors run early and majority of them have to deal with macro calls, often by ignoring them.
The second commit renames `visit_mac` to `visit_mac_call`, the corresponding structures were renamed earlier in https://github.com/rust-lang/rust/pull/69589.
Fix ICE when a future-incompat-report has its command-line level capped
Fixes#78660
With PR https://github.com/rust-lang/rust/pull/75534 merged, we now run
more lint-related code for future-incompat-report, even when their final
level is Allow. Some lint-related code was not expecting `Level::Allow`,
and had an explicit panic.
This PR explicitly tracks the lint level set on the command line before
`--cap-lints` is applied. This is used to emit a more precise error
note (e.g. we don't say that `-W lint-name` was specified on the
command line just because a lint was capped to Warn). As a result, we
can now correctly emit a note that `-A` was used if we got
`Level::Allow` from the command line (before the cap is applied).
See https://github.com/rust-lang/rust/issues/61733#issuecomment-716188981
We now preserve the trailing semicolon in a macro invocation, even if
the macro expands to nothing. As a result, the following code no longer
compiles:
```rust
macro_rules! empty {
() => { }
}
fn foo() -> bool { //~ ERROR mismatched
{ true } //~ ERROR mismatched
empty!();
}
```
Previously, `{ true }` would be considered the trailing expression, even
though there's a semicolon in `empty!();`
This makes macro expansion more token-based.
Fixes#78660
With PR https://github.com/rust-lang/rust/pull/75534 merged, we now run
more lint-related code for future-incompat-report, even when their final
level is Allow. Some lint-related code was not expecting `Level::Allow`,
and had an explicit panic.
This PR explicitly tracks the lint level set on the command line before
`--cap-lints` is applied. This is used to emit a more precise error
note (e.g. we don't say that `-W lint-name` was specified on the
command line just because a lint was capped to Warn). As a result, we
can now correctly emit a note that `-A` was used if we got
`Level::Allow` from the command line (before the cap is applied).
Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
Dogfood {exclusive,half-open} ranges in compiler (nfc)
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
In particular, this allows us to write more explicit matches that
avoid the pitfalls of using a fully general fall-through case, yet
remain fairly ergonomic. Less logic is in guard cases, more is in
the actual exhaustive case analysis.
No functional changes.
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
Introduce `TypeVisitor::BreakTy`
Implements MCP rust-lang/compiler-team#383.
r? `@ghost`
cc `@lcnr` `@oli-obk`
~~Blocked on FCP in rust-lang/compiler-team#383.~~
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
This is not ideal because it means `deny(broken_intra_doc_links)` will
no longer `deny(private_intra_doc_links)`. However, it can't be fixed
with a new lint group, because `broken` is already in the `rustdoc` lint
group; there would need to be a way to nest groups somehow.
This also removes the early `return` so that the link will be generated
even though it gives a warning.
transmute: use diagnostic item
closes#66075, we now have no remaining uses of `match_def_path` in the compiler while some uses still remain in `clippy`.
cc @RalfJung
Rollup of 15 pull requests
Successful merges:
- #76722 (Test and fix Send and Sync traits of BTreeMap artefacts)
- #76766 (Extract some intrinsics out of rustc_codegen_llvm)
- #76800 (Don't generate bootstrap usage unless it's needed)
- #76809 (simplfy condition in ItemLowerer::with_trait_impl_ref())
- #76815 (Fix wording in mir doc)
- #76818 (Don't compile regex at every function call.)
- #76821 (Remove redundant nightly features)
- #76823 (black_box: silence unused_mut warning when building with cfg(miri))
- #76825 (use `array_windows` instead of `windows` in the compiler)
- #76827 (fix array_windows docs)
- #76828 (use strip_prefix over starts_with and manual slicing based on pattern length (clippy::manual_strip))
- #76840 (Move to intra doc links in core/src/future)
- #76845 (Use intra docs links in core::{ascii, option, str, pattern, hash::map})
- #76853 (Use intra-doc links in library/core/src/task/wake.rs)
- #76871 (support panic=abort in Miri)
Failed merges:
r? `@ghost`
Validate constants during `const_eval_raw`
This PR implements the groundwork for https://github.com/rust-lang/rust/issues/72396
* constants are now validated during `const_eval_raw`
* to prevent cycle errors, we do not validate references to statics anymore beyond the fact that they are not dangling
* the `const_eval` query ICEs if used on `static` items
* as a side effect promoteds are now evaluated to `ConstValue::Scalar` again (since they are just a reference to the actual promoted allocation in most cases).
lint/ty: move fns to avoid abstraction violation
This PR moves `transparent_newtype_field` and `is_zst` to `LateContext` where they are used, rather than being on the `VariantDef` and `TyS` types, hopefully addressing @eddyb's concern [from this comment](https://github.com/rust-lang/rust/pull/74340#discussion_r456534910).
As a side effect, we now represent most promoteds as `ConstValue::Scalar` again. This is useful because all implict promoteds are just references anyway and most explicit promoteds are numeric arguments to `asm!` or SIMD instructions.
use sort_unstable to sort primitive types
It's not important to retain original order if we have &[1, 1, 2, 3] for example.
clippy::stable_sort_primitive
Auto-generate lint documentation.
This adds a tool which will generate the lint documentation in the rustc book automatically. This is motivated by keeping the documentation up-to-date, and consistently formatted. It also ensures the examples are correct and that they actually generate the expected lint. The lint groups table is also auto-generated. See https://github.com/rust-lang/compiler-team/issues/349 for the original proposal.
An outline of how this works:
- The `declare_lint!` macro now accepts a doc comment where the documentation is written. This is inspired by how clippy works.
- A new tool `src/tools/lint-docs` scrapes the documentation and adds it to the rustc book during the build.
- It runs each example and verifies its output and embeds the output in the book.
- It does a few formatting checks.
- It verifies that every lint is documented.
- Groups are collected from `rustc -W help`.
I updated the documentation for all the missing lints. I have also added an "Explanation" section to each lint providing a reason for the lint and suggestions on how to resolve it.
This can lead towards a future enhancement of possibly showing these docs via the `--explain` flag to make them easily accessible and discoverable.
If a symbol name can only be imported from one place for a type, and
as long as it was not glob-imported anywhere in the current crate, we
can trim its printed path and print only the name.
This has wide implications on error messages with types, for example,
shortening `std::vec::Vec` to just `Vec`, as long as there is no other
`Vec` importable anywhere.
This adds a new '-Z trim-diagnostic-paths=false' option to control this
feature.
On the good path, with no diagnosis printed, we should try to avoid
issuing this query, so we need to prevent trimmed_def_paths query on
several cases.
This change also relies on a previous commit that differentiates
between `Debug` and `Display` on various rustc types, where the latter
is trimmed and presented to the user and the former is not.
This commit moves `transparent_newtype_field` and `is_zst` to
`LateContext` where they are used, rather than being on the `VariantDef`
and `TyS` types.
Signed-off-by: David Wood <david@davidtw.co>
