Make `ExprKind::Closure` a struct variant.
Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`.
r? ``@Aaron1011``
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
Fix precise field capture of univariant enums
When constructing a MIR from a THIR field expression, introduce an
additional downcast projection before accessing a field of an enum.
When rebasing a place builder on top of a captured place, account for
the fact that a single HIR enum field projection corresponds to two MIR
projection elements: a downcast element and a field element.
Fixes#95271.
Fixes#96299.
Fixes#96512.
Fixes#97378.
r? ``@nikomatsakis`` ``@arora-aman``
Try to cache region_scope_tree as a query
This PR will attempt to restore `region_scope_tree` as a query so that caching works again. It seems that `region_scope_tree` could be re-computed for nested items after all, which could explain the performance regression introduced by #95563.
cc `@Mark-Simulacrum` `@pnkfelix` I will try to trigger a perf run here.
Output correct type responsible for structural match violation
Previously we included the outermost type that caused a structural match violation in the error message and stated that that type must be annotated with `#[derive(Eq, PartialEq)]` even if it already had that annotation. This PR outputs the correct type in the error message.
Fixes https://github.com/rust-lang/rust/issues/97278
Modify MIR building to drop repeat expressions with length zero
Closes#74836 .
Previously, when a user wrote `[foo; 0]` we used to simply leak `foo`. The goal is to fix that. This PR changes MIR building to make `[foo; 0]` equivalent to `{ drop(foo); [] }` in all cases. Of course, this is a breaking change (see below). A crater run did not indicate any regressions though, and given that the previous behavior was almost definitely not what any user wanted, it seems unlikely that anyone was relying on this.
Note that const generics are in general unaffected by this. Inserting the extra `drop` is only meaningful/necessary when `foo` is of a non-`Copy` type, and array repeat expressions with const generic repetition count must always be `Copy`.
Besides the obvious change to behavior associated with the additional drop, there are three categories of examples where this also changes observable behavior. In all of these cases, the new behavior is consistent with what you would get by replacing `[foo; 0]` with `{ drop(foo); [] }`. As such, none of these give the user new powers to express more things.
**No longer allowed in const (breaking)**:
```rust
const _: [String; 0] = [String::new(); 0];
```
This compiles on stable today. Because we now introduce the drop of `String`, this no longer compiles as `String` may not be dropped in a const context.
**Reduced dataflow (non-breaking)**:
```rust
let mut x: i32 = 0;
let r = &x;
let a = [r; 0];
x = 5;
let _b = a;
```
Borrowck rejects this code on stable because it believes there is dataflow between `a` and `r`, and so the lifetime of `r` has to extend to the last statement. This change removes the dataflow and the above code is allowed to compile.
**More const promotion (non-breaking)**:
```rust
let _v: &'static [String; 0] = &[String::new(); 0];
```
This does not compile today because `String` having drop glue keeps it from being const promoted (despite that drop glue never being executed). After this change, this is allowed to compile.
### Alternatives
A previous attempt at this tried to reduce breakage by various tricks. This is still a possibility, but given that crater showed no regressions it seems unclear why we would want to introduce this complexity.
Disallowing `[foo; 0]` completely is also an option, but obviously this is more of a breaking change. I do not know how often this is actually used though.
r? `@oli-obk`
When constructing a MIR from a THIR field expression, introduce an
additional downcast projection before accessing a field of an enum.
When rebasing a place builder on top of a captured place, account for
the fact that a single HIR enum field projection corresponds to two MIR
projection elements: a downcast element and a field element.
correctly deal with user type ascriptions in pat
supersedes #93856
`thir::PatKind::AscribeUserType` previously resulted in `CanonicalUserTypeAnnotations` where the inferred type already had a subtyping relation according to `variance` to the `user_ty`.
The bug can pretty much be summarized as follows:
- during mir building
- `user_ty -> inferred_ty`: considers variance
- `StatementKind::AscribeUserType`: `inferred_ty` is the type of the place, so no variance needed
- during mir borrowck
- `user_ty -> inferred_ty`: does not consider variance
- `StatementKind::AscribeUserType`: applies variance
This mostly worked fine. The lifetimes in `inferred_ty` were only bound by its relation to `user_ty` and to the `place` of `StatementKind::AscribeUserType`, so it doesn't matter where exactly the subtyping happens.
It does however matter when having higher ranked subtying. At this point the place where the subtyping happens is forced, causing this mismatch between building and borrowck to result in unintended errors.
cc #96514 which is pretty much the same issue
r? `@nikomatsakis`
Add EarlyBinder
Chalk has no concept of `Param` (e0ade19d13/chalk-ir/src/lib.rs (L579)) or `ReEarlyBound` (e0ade19d13/chalk-ir/src/lib.rs (L1308)). Everything is just "bound" - the equivalent of rustc's late-bound. It's not completely clear yet whether to move everything to the same time of binder in rustc or add `Param` and `ReEarlyBound` in Chalk.
Either way, tracking when we have or haven't already substituted out these in rustc can be helpful.
As a first step, I'm just adding a `EarlyBinder` newtype that is required to call `subst`. I also add a couple "transparent" `bound_*` wrappers around a couple query that are often immediately substituted.
r? `@nikomatsakis`
don't encode only locally used attrs
Part of https://github.com/rust-lang/compiler-team/issues/505.
We now filter builtin attributes before encoding them in the crate metadata in case they should only be used in the local crate. To prevent accidental misuse `get_attrs` now requires the caller to state which attribute they are interested in. For places where that isn't trivially possible, I've added a method `fn get_attrs_unchecked` which I intend to remove in a followup PR.
After this pull request landed, we can then slowly move all attributes to only be used in the local crate while being certain that we don't accidentally try to access them from extern crates.
cc https://github.com/rust-lang/rust/pull/94963#issuecomment-1082924289
Use `FxIndexSet` to avoid sorting fake borrows
This fixes#96449, but I haven't yet been able to
make the reproducer work using `#[cfg]` attributes,
so we can't use the 'revision' infra to write a test
The previous implementation relied on sorting by `PlaceRef`.
This requires sorting by a `DefId`, which uses untracked state
(see #93315)
This fixes#96449, but I haven't yet been able to
make the reproducer work using `#[cfg]` attributes,
so we can't use the 'revision' infra to write a test
The previous implementation relied on sorting by `PlaceRef`.
This requires sorting by a `DefId`, which uses untracked state
(see #93315)
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Only crate root def-ids don't have a parent, and in majority of cases the argument of `DefIdTree::parent` cannot be a crate root.
So we now panic by default in `parent` and introduce a new non-panicing function `opt_parent` for cases where the argument can be a crate root.
Same applies to `local_parent`/`opt_local_parent`.
Check if call return type is visibly uninhabited when building MIR
The main motivation behind the change is to expose information about diverging
calls to the generator transform and match the precision of drop range tracking
which already understands that call expressions with visibly uninhabited types
diverges.
This change should also accept strictly more programs than before. That is
programs that were previously rejected due to errors raised by control-flow
sensitive checks in a code that is no longer considered reachable.
Fixes#93161.
Implement sym operands for global_asm!
Tracking issue: #93333
This PR is pretty much a complete rewrite of `sym` operand support for inline assembly so that the same implementation can be shared by `asm!` and `global_asm!`. The main changes are:
- At the AST level, `sym` is represented as a special `InlineAsmSym` AST node containing a path instead of an `Expr`.
- At the HIR level, `sym` is split into `SymStatic` and `SymFn` depending on whether the path resolves to a static during AST lowering (defaults to `SynFn` if `get_early_res` fails).
- `SymFn` is just an `AnonConst`. It runs through typeck and we just collect the resulting type at the end. An error is emitted if the type is not a `FnDef`.
- `SymStatic` directly holds a path and the `DefId` of the `static` that it is pointing to.
- The representation at the MIR level is mostly unchanged. There is a minor change to THIR where `SymFn` is a constant instead of an expression.
- At the codegen level we need to apply the target's symbol mangling to the result of `tcx.symbol_name()` depending on the target. This is done by calling the LLVM name mangler, which handles all of the details.
- On Mach-O, all symbols have a leading underscore.
- On x86 Windows, different mangling is used for cdecl, stdcall, fastcall and vectorcall.
- No mangling is needed on other platforms.
r? `@nagisa`
cc `@eddyb`
Use mir constant in thir instead of ty::Const
This is blocked on https://github.com/rust-lang/rust/pull/94059 (does include its changes, the first two commits in this PR correspond to those changes) and https://github.com/rust-lang/rust/pull/93800 being reinstated (which had to be reverted). Mainly opening since `@lcnr` offered to give some feedback and maybe also for a perf-run (if necessary).
This currently contains a lot of duplication since some of the logic of `ty::Const` had to be copied to `mir::ConstantKind`, but with the introduction of valtrees a lot of that functionality will disappear from `ty::Const`.
Only the last commit contains changes that need to be reviewed here. Did leave some `FIXME` comments regarding future implementation decisions and some things that might be incorrectly implemented.
r? `@oli-obk`
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
Remember mutability in `DefKind::Static`.
This allows to compute the `BodyOwnerKind` from `DefKind` only, and
removes a direct dependency of some MIR queries onto HIR.
As a side effect, it also simplifies metadata, since we don't need 4
flavours of `EntryKind::*Static` any more.
Rollup of 5 pull requests
Successful merges:
- #95294 (Document Linux kernel handoff in std::io::copy and std::fs::copy)
- #95443 (Clarify how `src/tools/x` searches for python)
- #95452 (fix since field version for termination stabilization)
- #95460 (Spellchecking compiler code)
- #95461 (Spellchecking some comments)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
This allows to compute the `BodyOwnerKind` from `DefKind` only, and
removes a direct dependency of some MIR queries onto HIR.
As a side effect, it also simplifies metadata, since we don't need 4
flavours of `EntryKind::*Static` any more.
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
Only look for complete suffixes or prefixes of irrefutable let patterns, so
that an irrefutable let pattern in a chain surrounded by refutable ones is
not linted, as it is an useful pattern.
This commit makes `AdtDef` use `Interned`. Much the commit is tedious
changes to introduce getter functions. The interesting changes are in
`compiler/rustc_middle/src/ty/adt.rs`.
Treat constant values as mir::ConstantKind::Val
Another step that is necessary for the introduction of Valtrees: we don't want to treat `ty::Const` instances of kind `ty::ConstKind::Value` as `mir::ConstantKind::Ty` anymore.
r? `@oli-obk`
This makes the order of the output always consistent:
1. Place of the `match` missing arms
2. The `enum` definition span
3. The structured suggestion to add a fallthrough arm
safely `transmute<&List<Ty<'tcx>>, &List<GenericArg<'tcx>>>`
This PR has 3 relevant steps which are is split in distinct commits.
The first commit now interns `List<Ty<'tcx>>` and `List<GenericArg<'tcx>>` together, potentially reusing memory while allowing free conversions between these two using `List<Ty<'tcx>>::as_substs()` and `SubstsRef<'tcx>::try_as_type_list()`.
Using this, we then use `&'tcx List<Ty<'tcx>>` instead of a `SubstsRef<'tcx>` for tuple fields, simplifying a bunch of code.
Finally, as tuple fields and other generic arguments now use a different `TypeFoldable<'tcx>` impl, we optimize the impl for `List<Ty<'tcx>>` improving perf by slightly less than 1% in tuple heavy benchmarks.
This reverts commit a240ccd81c, reversing
changes made to 393fdc1048.
This PR was likely responsible for a relatively large regression in
dist-x86_64-msvc-alt builder times, from approximately 1.7 to 2.8 hours,
bringing that builder into the pool of the slowest builders we currently have.
This seems to be limited to the alt builder due to needing parallel-compiler
enabled, likely leading to slow LLVM compilation for some reason.
Improve `unused_unsafe` lint
I’m going to add some motivation and explanation below, particularly pointing the changes in behavior from this PR.
_Edit:_ Looking for existing issues, looks like this PR fixes#88260.
_Edit2:_ Now also contains code that closes#90776.
Main motivation: Fixes some issues with the current behavior. This PR is
more-or-less completely re-implementing the unused_unsafe lint; it’s also only
done in the MIR-version of the lint, the set of tests for the `-Zthir-unsafeck`
version no longer succeeds (and is thus disabled, see `lint-unused-unsafe.rs`).
On current nightly,
```rs
unsafe fn unsf() {}
fn inner_ignored() {
unsafe {
#[allow(unused_unsafe)]
unsafe {
unsf()
}
}
}
```
doesn’t create any warnings. This situation is not unrealistic to come by, the
inner `unsafe` block could e.g. come from a macro. Actually, this PR even
includes removal of one unused `unsafe` in the standard library that was missed
in a similar situation. (The inner `unsafe` coming from an external macro hides
the warning, too.)
The reason behind this problem is how the check currently works:
* While generating MIR, it already skips nested unsafe blocks (i.e. unsafe
nested in other unsafe) so that the inner one is always the one considered
unused
* To differentiate the cases of no unsafe operations inside the `unsafe` vs.
a surrounding `unsafe` block, there’s some ad-hoc magic walking up the HIR to
look for surrounding used `unsafe` blocks.
There’s a lot of problems with this approach besides the one presented above.
E.g. the MIR-building uses checks for `unsafe_op_in_unsafe_fn` lint to decide
early whether or not `unsafe` blocks in an `unsafe fn` are redundant and ought
to be removed.
```rs
unsafe fn granular_disallow_op_in_unsafe_fn() {
unsafe {
#[deny(unsafe_op_in_unsafe_fn)]
{
unsf();
}
}
}
```
```
error: call to unsafe function is unsafe and requires unsafe block (error E0133)
--> src/main.rs:13:13
|
13 | unsf();
| ^^^^^^ call to unsafe function
|
note: the lint level is defined here
--> src/main.rs:11:16
|
11 | #[deny(unsafe_op_in_unsafe_fn)]
| ^^^^^^^^^^^^^^^^^^^^^^
= note: consult the function's documentation for information on how to avoid undefined behavior
warning: unnecessary `unsafe` block
--> src/main.rs:10:5
|
9 | unsafe fn granular_disallow_op_in_unsafe_fn() {
| --------------------------------------------- because it's nested under this `unsafe` fn
10 | unsafe {
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
```
Here, the intermediate `unsafe` was ignored, even though it contains a unsafe
operation that is not allowed to happen in an `unsafe fn` without an additional `unsafe` block.
Also closures were problematic and the workaround/algorithms used on current
nightly didn’t work properly. (I skipped trying to fully understand what it was
supposed to do, because this PR uses a completely different approach.)
```rs
fn nested() {
unsafe {
unsafe { unsf() }
}
}
```
```
warning: unnecessary `unsafe` block
--> src/main.rs:10:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
10 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
```
vs
```rs
fn nested() {
let _ = || unsafe {
let _ = || unsafe { unsf() };
};
}
```
```
warning: unnecessary `unsafe` block
--> src/main.rs:9:16
|
9 | let _ = || unsafe {
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
warning: unnecessary `unsafe` block
--> src/main.rs:10:20
|
10 | let _ = || unsafe { unsf() };
| ^^^^^^ unnecessary `unsafe` block
```
*note that this warning kind-of suggests that **both** unsafe blocks are redundant*
--------------------------------------------------------------------------------
I also dislike the fact that it always suggests keeping the outermost `unsafe`.
E.g. for
```rs
fn granularity() {
unsafe {
unsafe { unsf() }
unsafe { unsf() }
unsafe { unsf() }
}
}
```
I prefer if `rustc` suggests removing the more-course outer-level `unsafe`
instead of the fine-grained inner `unsafe` blocks, which it currently does on nightly:
```
warning: unnecessary `unsafe` block
--> src/main.rs:10:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
10 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
warning: unnecessary `unsafe` block
--> src/main.rs:11:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
10 | unsafe { unsf() }
11 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
warning: unnecessary `unsafe` block
--> src/main.rs:12:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
...
12 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
```
--------------------------------------------------------------------------------
Needless to say, this PR addresses all these points. For context, as far as my
understanding goes, the main advantage of skipping inner unsafe blocks was that
a test case like
```rs
fn top_level_used() {
unsafe {
unsf();
unsafe { unsf() }
unsafe { unsf() }
unsafe { unsf() }
}
}
```
should generate some warning because there’s redundant nested `unsafe`, however
every single `unsafe` block _does_ contain some statement that uses it. Of course
this PR doesn’t aim change the warnings on this kind of code example, because
the current behavior, warning on all the inner `unsafe` blocks, makes sense in this case.
As mentioned, during MIR building all the unsafe blocks *are* kept now, and usage
is attributed to them. The way to still generate a warning like
```
warning: unnecessary `unsafe` block
--> src/main.rs:11:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
10 | unsf();
11 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `#[warn(unused_unsafe)]` on by default
warning: unnecessary `unsafe` block
--> src/main.rs:12:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
...
12 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
warning: unnecessary `unsafe` block
--> src/main.rs:13:9
|
9 | unsafe {
| ------ because it's nested under this `unsafe` block
...
13 | unsafe { unsf() }
| ^^^^^^ unnecessary `unsafe` block
```
in this case is by emitting a `unused_unsafe` warning for all of the `unsafe`
blocks that are _within a **used** unsafe block_.
The previous code had a little HIR traversal already anyways to collect a set of
all the unsafe blocks (in order to afterwards determine which ones are unused
afterwards). This PR uses such a traversal to do additional things including logic
like _always_ warn for an `unsafe` block that’s inside of another **used**
unsafe block. The traversal is expanded to include nested closures in the same go,
this simplifies a lot of things.
The whole logic around `unsafe_op_in_unsafe_fn` is a little complicated, there’s
some test cases of corner-cases in this PR. (The implementation involves
differentiating between whether a used unsafe block was used exclusively by
operations where `allow(unsafe_op_in_unsafe_fn)` was active.) The main goal was
to make sure that code should compile successfully if all the `unused_unsafe`-warnings
are addressed _simultaneously_ (by removing the respective `unsafe` blocks)
no matter how complicated the patterns of `unsafe_op_in_unsafe_fn` being
disallowed and allowed throughout the function are.
--------------------------------------------------------------------------------
One noteworthy design decision I took here: An `unsafe` block
with `allow(unused_unsafe)` **is considered used** for the purposes of
linting about redundant contained unsafe blocks. So while
```rs
fn granularity() {
unsafe { //~ ERROR: unnecessary `unsafe` block
unsafe { unsf() }
unsafe { unsf() }
unsafe { unsf() }
}
}
```
warns for the outer `unsafe` block,
```rs
fn top_level_ignored() {
#[allow(unused_unsafe)]
unsafe {
#[deny(unused_unsafe)]
{
unsafe { unsf() } //~ ERROR: unnecessary `unsafe` block
unsafe { unsf() } //~ ERROR: unnecessary `unsafe` block
unsafe { unsf() } //~ ERROR: unnecessary `unsafe` block
}
}
}
```
warns on the inner ones.
Move ty::print methods to Drop-based scope guards
Primary goal is reducing codegen of the TLS access for each closure, which shaves ~3 seconds of bootstrap time over rustc as a whole.
Specifically, rename the `Const` struct as `ConstS` and re-introduce `Const` as
this:
```
pub struct Const<'tcx>(&'tcx Interned<ConstS>);
```
This now matches `Ty` and `Predicate` more closely, including using
pointer-based `eq` and `hash`.
Notable changes:
- `mk_const` now takes a `ConstS`.
- `Const` was copy, despite being 48 bytes. Now `ConstS` is not, so need a
we need separate arena for it, because we can't use the `Dropless` one any
more.
- Many `&'tcx Const<'tcx>`/`&Const<'tcx>` to `Const<'tcx>` changes
- Many `ct.ty` to `ct.ty()` and `ct.val` to `ct.val()` changes.
- Lots of tedious sigil fiddling.
Specifically, change `Region` from this:
```
pub type Region<'tcx> = &'tcx RegionKind;
```
to this:
```
pub struct Region<'tcx>(&'tcx Interned<RegionKind>);
```
This now matches `Ty` and `Predicate` more closely.
Things to note
- Regions have always been interned, but we haven't been using pointer-based
`Eq` and `Hash`. This is now happening.
- I chose to impl `Deref` for `Region` because it makes pattern matching a lot
nicer, and `Region` can be viewed as just a smart wrapper for `RegionKind`.
- Various methods are moved from `RegionKind` to `Region`.
- There is a lot of tedious sigil changes.
- A couple of types like `HighlightBuilder`, `RegionHighlightMode` now have a
`'tcx` lifetime because they hold a `Ty<'tcx>`, so they can call `mk_region`.
- A couple of test outputs change slightly, I'm not sure why, but the new
outputs are a little better.
Specifically, change `Ty` from this:
```
pub type Ty<'tcx> = &'tcx TyS<'tcx>;
```
to this
```
pub struct Ty<'tcx>(Interned<'tcx, TyS<'tcx>>);
```
There are two benefits to this.
- It's now a first class type, so we can define methods on it. This
means we can move a lot of methods away from `TyS`, leaving `TyS` as a
barely-used type, which is appropriate given that it's not meant to
be used directly.
- The uniqueness requirement is now explicit, via the `Interned` type.
E.g. the pointer-based `Eq` and `Hash` comes from `Interned`, rather
than via `TyS`, which wasn't obvious at all.
Much of this commit is boring churn. The interesting changes are in
these files:
- compiler/rustc_middle/src/arena.rs
- compiler/rustc_middle/src/mir/visit.rs
- compiler/rustc_middle/src/ty/context.rs
- compiler/rustc_middle/src/ty/mod.rs
Specifically:
- Most mentions of `TyS` are removed. It's very much a dumb struct now;
`Ty` has all the smarts.
- `TyS` now has `crate` visibility instead of `pub`.
- `TyS::make_for_test` is removed in favour of the static `BOOL_TY`,
which just works better with the new structure.
- The `Eq`/`Ord`/`Hash` impls are removed from `TyS`. `Interned`s impls
of `Eq`/`Hash` now suffice. `Ord` is now partly on `Interned`
(pointer-based, for the `Equal` case) and partly on `TyS`
(contents-based, for the other cases).
- There are many tedious sigil adjustments, i.e. adding or removing `*`
or `&`. They seem to be unavoidable.
Lazy type-alias-impl-trait
Previously opaque types were processed by
1. replacing all mentions of them with inference variables
2. memorizing these inference variables in a side-table
3. at the end of typeck, resolve the inference variables in the side table and use the resolved type as the hidden type of the opaque type
This worked okayish for `impl Trait` in return position, but required lots of roundabout type inference hacks and processing.
This PR instead stops this process of replacing opaque types with inference variables, and just keeps the opaque types around.
Whenever an opaque type `O` is compared with another type `T`, we make the comparison succeed and record `T` as the hidden type. If `O` is compared to `U` while there is a recorded hidden type for it, we grab the recorded type (`T`) and compare that against `U`. This makes implementing
* https://github.com/rust-lang/rfcs/pull/2515
much simpler (previous attempts on the inference based scheme were very prone to ICEs and general misbehaviour that was not explainable except by random implementation defined oddities).
r? `@nikomatsakis`
fixes#93411fixes#88236
by using an opaque type obligation to bubble up comparisons between opaque types and other types
Also uses proper obligation causes so that the body id works, because out of some reason nll uses body ids for logic instead of just diagnostics.
The unconditional recursion lint determines if all execution paths
eventually lead to a self-recursive call.
The implementation always follows unwinding edges which limits its
practical utility. For example, it would not lint function `f` because a
call to `g` might unwind. It also wouldn't lint function `h` because an
overflow check preceding the self-recursive call might unwind:
```rust
pub fn f() {
g();
f();
}
pub fn g() { /* ... */ }
pub fn h(a: usize) {
h(a + 1);
}
```
To avoid the issue, assume that terminators that might continue
execution along non-unwinding edges do so.
Replace `NestedVisitorMap` with generic `NestedFilter`
This is an attempt to make the `intravisit::Visitor` API simpler and "more const" with regard to nested visiting.
With this change, `intravisit::Visitor` does not visit nested things by default, unless you specify `type NestedFilter = nested_filter::OnlyBodies` (or `All`). `nested_visit_map` returns `Self::Map` instead of `NestedVisitorMap<Self::Map>`. It panics by default (unreachable if `type NestedFilter` is omitted).
One somewhat trixty thing here is that `nested_filter::{OnlyBodies, All}` live in `rustc_middle` so that they may have `type Map = map::Map` and so that `impl Visitor`s never need to specify `type Map` - it has a default of `Self::NestedFilter::Map`.
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
Closure capture cleanup & refactor
Follow up of #89648
Each commit is self-contained and the rationale/changes are documented in the commit message, so it's advisable to review commit by commit.
The code is significantly cleaner (at least IMO), but that could have some perf implication, so I'd suggest a perf run.
r? `@wesleywiser`
cc `@arora-aman`
The field is also renamed from `ident` to `name. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Region info is completely unnecessary for upvar capture kind computation
and is only needed to create the final upvar tuple ty. Doing so makes
creation of UpvarCapture very cheap and expose further cleanup opportunity.
The `AggregateKind` enum ends up in the final mir `Body`. Currently,
any changes to `AdtDef` (regardless of how significant they are)
will legitimately cause the overall result of `optimized_mir` to change,
invalidating any codegen re-use involving that mir.
This will get worse once we start hashing the `Span` inside `FieldDef`
(which is itself contained in `AdtDef`).
To try to reduce these kinds of invalidations, this commit changes
`AggregateKind::Adt` to store just the `DefId`, instead of the full
`AdtDef`. This allows the result of `optimized_mir` to be unchanged
if the `AdtDef` changes in a way that doesn't actually affect any
of the MIR we build.
Implement let-else type annotations natively
Tracking issue: #87335Fixes#89688, fixes#89807, edit: fixes #89960 as well
As explained in https://github.com/rust-lang/rust/issues/89688#issuecomment-940405082, the previous desugaring moved the let-else scrutinee into a dummy variable, which meant if you wanted to refer to it again in the else block, it had moved.
This introduces a new hir type, ~~`hir::LetExpr`~~ `hir::Let`, which takes over all the fields of `hir::ExprKind::Let(...)` and adds an optional type annotation. The `hir::Let` is then treated like a `hir::Local` when type checking a function body, specifically:
* `GatherLocalsVisitor` overrides a new `Visitor::visit_let_expr` and does pretty much exactly what it does for `visit_local`, assigning a local type to the `hir::Let` ~~(they could be deduplicated but they are right next to each other, so at least we know they're the same)~~
* It reuses the code in `check_decl_local` to typecheck the `hir::Let`, simply returning 'bool' for the expression type after doing that.
* ~~`FnCtxt::check_expr_let` passes this local type in to `demand_scrutinee_type`, and then imitates check_decl_local's pattern checking~~
* ~~`demand_scrutinee_type` (the blindest change for me, please give this extra scrutiny) uses this local type instead of of creating a new one~~
* ~~Just realised the `check_expr_with_needs` was passing NoExpectation further down, need to pass the type there too. And apparently this Expectation API already exists.~~
Some other misc notes:
* ~~Is the clippy code supposed to be autoformatted? I tried not to give huge diffs but maybe some rustfmt changes simply haven't hit it yet.~~
* in `rustc_ast_lowering/src/block.rs`, I noticed some existing `self.alias_attrs()` calls in `LoweringContext::lower_stmts` seem to be copying attributes from the lowered locals/etc to the statements. Is that right? I'm new at this, I don't know.
rustc_mir_build: reorder bindings
No functional changes intended.
I'm playing around with building compiler components using nightly rust
(2021-11-02) in a non-standard way. I encountered the following error while
trying to build rustc_mir_build:
```
error[E0597]: `wildcard` does not live long enough
--> rust/src/nightly/compiler/rustc_mir_build/src/build/matches/mod.rs:1767:82
|
1767 | let mut otherwise_candidate = Candidate::new(expr_place_builder.clone(), &wildcard, false);
| ^^^^^^^^^ borrowed value does not live long enough
...
1799 | }
| -
| |
| `wildcard` dropped here while still borrowed
| borrow might be used here, when `guard_candidate` is dropped and runs the destructor for type `Candidate<'_, '_>`
|
= note: values in a scope are dropped in the opposite order they are defined
```
I believe this flags an issue that may become an error in the future.
Swapping the order of `wildcard` and `guard_candidate` resolves it.
No functional changes intended.
I'm playing around with building compiler components using nightly rust
(2021-11-02) in a non-standard way. I encountered the following error while
trying to build rustc_mir_build:
```
error[E0597]: `wildcard` does not live long enough
--> rust/src/nightly/compiler/rustc_mir_build/src/build/matches/mod.rs:1767:82
|
1767 | let mut otherwise_candidate = Candidate::new(expr_place_builder.clone(), &wildcard, false);
| ^^^^^^^^^ borrowed value does not live long enough
...
1799 | }
| -
| |
| `wildcard` dropped here while still borrowed
| borrow might be used here, when `guard_candidate` is dropped and runs the destructor for type `Candidate<'_, '_>`
|
= note: values in a scope are dropped in the opposite order they are defined
```
I believe this flags an issue that may become an error in the future.
Swapping the order of `wildcard` and `guard_candidate` resolves it.
Optimize pattern matching
These commits speed up the `match-stress-enum` benchmark, which is very artificial, but the changes are simple enough that it's probably worth doing.
r? `@Nadrieril`
Remove hir::map::blocks and use FnKind instead
The principal tool is `FnLikeNode`, which is not often used and can be easily implemented using `rustc_hir::intravisit::FnKind`.
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
Add test cases for unstable variants
Add test cases for doc hidden variants
Move is_doc_hidden to method on TyCtxt
Add unstable variants test to reachable-patterns ui test
Rename reachable-patterns -> omitted-patterns
Normalize after substituting via `field.ty()`
Back in https://github.com/rust-lang/rust/issues/72476 I hadn't understood where the problem was coming from, and only worked around the issue. What happens is that calling `field.ty()` on a field of a generic struct substitutes the appropriate generics but doesn't normalize the resulting type.
As a consumer of types I'm surprised that one would substitute without normalizing, feels like a footgun, so I added a comment.
Fixes https://github.com/rust-lang/rust/issues/89393.
fix(lint): don't suggest refutable patterns to "fix" irrefutable bind
In function arguments and let bindings, do not suggest changing `C` to `Foo::C` unless `C` is the only variant of `Foo`, because it won't work.
The general warning is still kept, because code like this is confusing.
Fixes#88730
p.s. `src/test/ui/lint/lint-uppercase-variables.rs` already tests the one-variant case.
Use larger span for adjustment THIR expressions
Currently, we use a relatively 'small' span for THIR
expressions generated by an 'adjustment' (e.g. an autoderef,
autoborrow, unsizing). As a result, if a borrow generated
by an adustment ends up causing a borrowcheck error, for example:
```rust
let mut my_var = String::new();
let my_ref = &my_var
my_var.push('a');
my_ref;
```
then the span for the mutable borrow may end up referring
to only the base expression (e.g. `my_var`), rather than
the method call which triggered the mutable borrow
(e.g. `my_var.push('a')`)
Due to a quirk of the MIR borrowck implementation,
this doesn't always get exposed in migration mode,
but it does in many cases.
This commit makes THIR building consistently use 'larger'
spans for adjustment expressions. These spans are recoded
when we first create the adjustment during typecheck. For
example, an autoref adjustment triggered by a method call
will record the span of the entire method call.
The intent of this change it make it clearer to users
when it's the specific way in which a variable is
used (for example, in a method call) that produdes
a borrowcheck error. For example, an error message
claiming that a 'mutable borrow occurs here' might
be confusing if it just points at a usage of a variable
(e.g. `my_var`), when no `&mut` is in sight. Pointing
at the entire expression should help to emphasize
that the method call itself is responsible for
the mutable borrow.
In several cases, this makes the `#![feature(nll)]` diagnostic
output match up exactly with the default (migration mode) output.
As a result, several `.nll.stderr` files end up getting removed
entirely.
In function arguments and let bindings, do not suggest changing `C` to `Foo::C`
unless `C` is the only variant of `Foo`, because it won't work.
The general warning is still kept, because code like this is confusing.
Fixes#88730
Add an intermediate representation to exhaustiveness checking
The exhaustiveness checking algorithm keeps deconstructing patterns into a `Constructor` and some `Fields`, but does so a bit all over the place. This PR introduces a new representation for patterns that already has that information, so we only compute it once at the start.
I find this makes code easier to follow. In particular `DeconstructedPat::specialize` is a lot simpler than what happened before, and more closely matches the description of the algorithm. I'm also hoping this could help for the project of librarifying exhaustiveness for rust_analyzer since it decouples the algorithm from `rustc_middle::Pat`.
Now `Fields` is just a `Vec` of patterns, with some extra info on the
side to reconstruct patterns when needed. This emphasizes that this
extra info is not central to the algorithm.
Currently, we use a relatively 'small' span for THIR
expressions generated by an 'adjustment' (e.g. an autoderef,
autoborrow, unsizing). As a result, if a borrow generated
by an adustment ends up causing a borrowcheck error, for example:
```rust
let mut my_var = String::new();
let my_ref = &my_var
my_var.push('a');
my_ref;
```
then the span for the mutable borrow may end up referring
to only the base expression (e.g. `my_var`), rather than
the method call which triggered the mutable borrow
(e.g. `my_var.push('a')`)
Due to a quirk of the MIR borrowck implementation,
this doesn't always get exposed in migration mode,
but it does in many cases.
This commit makes THIR building consistently use 'larger'
spans for adjustment expressions
The intent of this change it make it clearer to users
when it's the specific way in which a variable is
used (for example, in a method call) that produdes
a borrowcheck error. For example, an error message
claiming that a 'mutable borrow occurs here' might
be confusing if it just points at a usage of a variable
(e.g. `my_var`), when no `&mut` is in sight. Pointing
at the entire expression should help to emphasize
that the method call itself is responsible for
the mutable borrow.
In several cases, this makes the `#![feature(nll)]` diagnostic
output match up exactly with the default (migration mode) output.
As a result, several `.nll.stderr` files end up getting removed
entirely.
Rollup of 12 pull requests
Successful merges:
- #88795 (Print a note if a character literal contains a variation selector)
- #89015 (core::ascii::escape_default: reduce struct size)
- #89078 (Cleanup: Remove needless reference in ParentHirIterator)
- #89086 (Stabilize `Iterator::map_while`)
- #89096 ([bootstrap] Improve the error message when `ninja` is not found to link to installation instructions)
- #89113 (dont `.ensure()` the `thir_abstract_const` query call in `mir_build`)
- #89114 (Fixes a technicality regarding the size of C's `char` type)
- #89115 (⬆️ rust-analyzer)
- #89126 (Fix ICE when `indirect_structural_match` is allowed)
- #89141 (Impl `Error` for `FromSecsError` without foreign type)
- #89142 (Fix match for placeholder region)
- #89147 (add case for checking const refs in check_const_value_eq)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Fix ICE when `indirect_structural_match` is allowed
Fixes#89088. The ICE is caused by `delay_good_path_bug()`, which is called (indirectly) from a `format!()` macro invocation. I have moved the macro invocation into the `decorate` closure of `struct_span_lint_hir()`, so that the macro is only invoked if the lint is not allowed (i.e., causes at least a warning, and thus prevents `delay_good_path_bug()` from firing).
dont `.ensure()` the `thir_abstract_const` query call in `mir_build`
might fix an ICE seen in #89022 (note: this PR does not close that issue) about attempting to read stolen thir. I couldn't repro the ICE but this `.ensure` seems sus anyway.
r? `@lcnr`
This just applies the suggested fixes from the compatibility warnings,
leaving any that are in practice spurious in. This is primarily intended to
provide a starting point to identify possible fixes to the migrations (e.g., by
avoiding spurious warnings).
A secondary commit cleans these up where they are false positives (as is true in
many of the cases).
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Add linting on non_exhaustive structs and enum variants
Add ui tests for non_exhaustive reachable lint
Rename to non_exhaustive_omitted_patterns and avoid triggering on if let
generic_const_exprs: use thir for abstract consts instead of mir
Changes `AbstractConst` building to use `thir` instead of `mir` so that there's less chance of consts unifying when they shouldn't because lowering to mir dropped information (see `abstract-consts-as-cast-5.rs` test)
r? `@lcnr`
Each pattern in a match arm has its own copy of the match guard in MIR,
with its own temporary, so it has to be dropped before the the guards
are joined to the single copy of the arm.
MIR lowering for `if let` expressions is now more complicated now that
`if let` exists in HIR. This PR adds a scope for the variables bound in
an `if let` expression and then uses an approach similar to how we
handle loops to ensure that we reliably drop the correct variables.
Previously, we would set up the source lines for `match` expressions so
that the code generated to perform the test of the scrutinee was matched
to the line of the arm that required the test and then jump from the arm
block to the "next" block was matched to all of the lines in the `match`
expression.
While that makes sense, it has the side effect of causing strange
stepping behavior in debuggers.
I've changed the source information so that all of the generated tests
are sourced to `match {scrutinee}` and the jumps are sourced to the last
line of the block they are inside. This resolves the weird stepping
behavior in all debuggers and resolves some instances of "ambiguous
symbol" errors in WinDbg preventing the user from setting breakpoints at
`match` expressions.
RFC2229 Only compute place if upvars can be resolved
Closes https://github.com/rust-lang/rust/issues/87987
This PR fixes an ICE when trying to unwrap an Err. This error appears when trying to convert a PlaceBuilder into Place when upvars can't yet be resolved. We should only try to convert a PlaceBuilder into Place if upvars can be resolved.
r? `@nikomatsakis`
