Prototype using const generic for simd_shuffle IDX array
cc https://github.com/rust-lang/rust/issues/85229
r? `@workingjubilee` on the design
TLDR: there is now a `fn simd_shuffle_generic<T, U, const IDX: &'static [u32]>(x: T, y: T) -> U;` intrinsic that allows replacing
```rust
simd_shuffle(a, b, const { stuff })
```
with
```rust
simd_shuffle_generic::<_, _, {&stuff}>(a, b)
```
which makes the compiler implementations much simpler, if we manage to at some point eliminate `simd_shuffle`.
There are some issues with this today though (can't do math without bubbling it up in the generic arguments). With this change, we can start porting the simple cases and get better data on the others.
subst -> instantiate
continues #110793, there are still quite a few uses of `subst` and `substitute`, but changing them all in the same PR was a bit too much, so I've stopped here for now.
The LLVM API that we use to encode coverage mappings already has its own code
for removing unused coverage expressions and renumbering the rest.
This lets us get rid of our own complex renumbering code, making it easier to
change our coverage code in other ways.
After coverage instrumentation and MIR transformations, we can sometimes end up
with coverage expressions that always have a value of zero. Any expression
operand that refers to an always-zero expression can be replaced with a literal
`Operand::Zero`, making the emitted coverage mapping data smaller and simpler.
This simplification step is mostly redundant with the simplifications performed
inline in `expressions_with_regions`, except that it does a slightly more
thorough job in some cases (because it checks for always-zero expressions
*after* other simplifications).
However, adding this simplification step will then let us greatly simplify that
code, without affecting the quality of the emitted coverage maps.
treat host effect params as erased in codegen
This fixes the changes brought to codegen tests when effect params are added to libcore, by not attempting to monomorphize functions that get the host param by being `const fn`.
r? `@oli-obk`
This fixes the changes brought to codegen tests when effect params are
added to libcore, by not attempting to monomorphize functions that get
the host param by being `const fn`.
Rework `no_coverage` to `coverage(off)`
As discussed at the tail of https://github.com/rust-lang/rust/issues/84605 this replaces the `no_coverage` attribute with a `coverage` attribute that takes sub-parameters (currently `off` and `on`) to control the coverage instrumentation.
Allows future-proofing for things like `coverage(off, reason="Tested live", issue="#12345")` or similar.
Remove `verbose_generic_activity_with_arg`
This removes `verbose_generic_activity_with_arg` and changes users to `generic_activity_with_arg`. This keeps the output of `-Z time` readable while these repeated events are still available with the self profiling mechanism.
Instead of writing coverage mappings into a supplied `&RustString`, this
function can just create the buffer itself and return the resulting vector of
bytes.
If two or more mappings cover exactly the same region, their relative order
will now be preserved from `get_expressions_and_counter_regions`, rather than
being disturbed by implementation details of an unstable sort.
The current order is: counter mappings, expression mappings, zero mappings.
(LLVM will also perform its own stable sort on these mappings, but that sort
only compares file ID, start location, and `RegionKind`.)
This struct was only being used to hold the global file table, and one of its
methods didn't even use the table. Changing its methods to ordinary functions
makes it easier to see where the table is mutated.
debuginfo: add compiler option to allow compressed debuginfo sections
LLVM already supports emitting compressed debuginfo. In debuginfo=full builds, the debug section is often a large amount of data, and it typically compresses very well (3x is not unreasonable.) We add a new knob to allow debuginfo to be compressed when the matching LLVM functionality is present. Like clang, if a known-but-disabled compression mechanism is requested, we disable compression and emit uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
Use the same DISubprogram for each instance of the same inlined function within a caller
# Issue Details:
The call to `panic` within a function like `Option::unwrap` is translated to LLVM as a `tail call` (as it will never return), when multiple calls to the same function like this are inlined LLVM will notice the common `tail call` block (i.e., loading the same panic string + location info and then calling `panic`) and merge them together.
When merging these instructions together, LLVM will also attempt to merge the debug locations as well, but this fails (i.e., debug info is dropped) as Rust emits a new `DISubprogram` at each inline site thus LLVM doesn't recognize that these are actually the same function and so thinks that there isn't a common debug location.
As an example of this, consider the following program:
```rust
#[no_mangle]
fn add_numbers(x: &Option<i32>, y: &Option<i32>) -> i32 {
let x1 = x.unwrap();
let y1 = y.unwrap();
x1 + y1
}
```
When building for x86_64 Windows using 1.72 it generates (note the lack of `.cv_loc` before the call to `panic`, thus it will be attributed to the same line at the `addq` instruction):
```llvm
.cv_loc 0 1 3 0 # src\lib.rs:3:0
addq $40, %rsp
retq
leaq .Lalloc_f570dea0a53168780ce9a91e67646421(%rip), %rcx
leaq .Lalloc_629ace53b7e5b76aaa810d549cc84ea3(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17h12e60b9063f6dee8E
int3
```
# Fix Details:
Cache the `DISubprogram` emitted for each inlined function instance within a caller so that this can be reused if that instance is encountered again.
Ideally, we would also deduplicate child scopes and variables, however my attempt to do that with #114643 resulted in asserts when building for Linux (#115156) which would require some deep changes to Rust to fix (#115455).
Instead, when using an inlined function as a debug scope, we will also create a new child scope such that subsequent child scopes and variables do not collide (from LLVM's perspective).
After this change the above assembly now (with <https://reviews.llvm.org/D159226> as well) shows the `panic!` was inlined from `unwrap` in `option.rs` at line 935 into the current function in `lib.rs` at line 0 (line 0 is emitted since it is ambiguous which line to use as there were two inline sites that lead to this same code):
```llvm
.cv_loc 0 1 3 0 # src\lib.rs:3:0
addq $40, %rsp
retq
.cv_inline_site_id 6 within 0 inlined_at 1 0 0
.cv_loc 6 2 935 0 # library\core\src\option.rs:935:0
leaq .Lalloc_5f55955de67e57c79064b537689facea(%rip), %rcx
leaq .Lalloc_e741d4de8cb5801e1fd7a6c6795c1559(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17hde1558f32d5b1c04E
int3
```
lto: load bitcode sections by name
Upstream change
llvm/llvm-project@6b539f5eb8 changed `isSectionBitcode` works and it now only respects `.llvm.lto` sections instead of also `.llvmbc`, which it says was never intended to be used for LTO. We instead load sections by name, and sniff for raw bitcode by hand.
This is an alternative approach to #115136, where we tried the same thing using the `object` crate, but it got too fraught to continue.
r? `@nikic`
`@rustbot` label: +llvm-main
Use `Freeze` for `SourceFile`
This uses the `Freeze` type in `SourceFile` to let accessing `external_src` and `lines` be lock-free.
Behavior of `add_external_src` is changed to set `ExternalSourceKind::AbsentErr` on a hash mismatch which matches the documentation. `ExternalSourceKind::Unneeded` was removed as it's unused.
Based on https://github.com/rust-lang/rust/pull/115401.
LLVM already supports emitting compressed debuginfo. In debuginfo=full
builds, the debug section is often a large amount of data, and it
typically compresses very well (3x is not unreasonable.) We add a new
knob to allow debuginfo to be compressed when the matching LLVM
functionality is present. Like clang, if a known-but-disabled
compression mechanism is requested, we disable compression and emit
uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
Upstream change
llvm/llvm-project@6b539f5eb8 changed
`isSectionBitcode` works and it now only respects `.llvm.lto` sections
instead of also `.llvmbc`, which it says was never intended to be used
for LTO. We instead load sections by name, and sniff for raw bitcode by
hand.
r? @nikic
@rustbot label: +llvm-main
Add CL and CMD into to pdb debug info
Partial fix for https://github.com/rust-lang/rust/issues/96475
The Arg0 and CommandLineArgs of the MCTargetOptions cpp class are not set within bb548f9645/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L378)
This causes LLVM to not neither output any compiler path (cl) nor the arguments that were used when invoking it (cmd) in the PDB file.
This fix adds the missing information to the target machine so LLVM can use it.
Upstream change
llvm/llvm-project@6b539f5eb8 changed
`isSectionBitcode` works and it now only respects `.llvm.lto` sections
instead of also `.llvmbc`, which it says was never intended to be used
for LTO. We instead load sections by name, and sniff for raw bitcode by
hand.
r? @nikic
@rustbot label: +llvm-main
