If modified, you can safely unmap arbitrary memory. These fields are not
intended to be modified, so read-only accessors are the only ones that are
provided.
Closes#15478
If modified, you can safely unmap arbitrary memory. These fields are not
intended to be modified, so read-only accessors are the only ones that are
provided.
Closes#15478
floating point numbers for real.
This will break code that looks like:
let mut x = 0;
while ... {
x += 1;
}
println!("{}", x);
Change that code to:
let mut x = 0i;
while ... {
x += 1;
}
println!("{}", x);
Closes#15201.
[breaking-change]
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
Most of the comments are available on the Task structure itself, but this commit
is aimed at making FFI-style usage of Rust tasks a little nicer.
Primarily, this commit enables re-use of tasks across multiple invocations. The
method `run` will no longer unconditionally destroy the task itself. Rather, the
task will be internally re-usable if the closure specified did not fail. Once a
task has failed once it is considered poisoned and it can never be used again.
Along the way I tried to document shortcomings of the current method of tearing
down a task, opening a few issues as well. For now none of the behavior is a
showstopper, but it's useful to acknowledge it. Also along the way I attempted
to remove as much `unsafe` code as possible, opting for safer abstractions.
Most of the comments are available on the Task structure itself, but this commit
is aimed at making FFI-style usage of Rust tasks a little nicer.
Primarily, this commit enables re-use of tasks across multiple invocations. The
method `run` will no longer unconditionally destroy the task itself. Rather, the
task will be internally re-usable if the closure specified did not fail. Once a
task has failed once it is considered poisoned and it can never be used again.
Along the way I tried to document shortcomings of the current method of tearing
down a task, opening a few issues as well. For now none of the behavior is a
showstopper, but it's useful to acknowledge it. Also along the way I attempted
to remove as much `unsafe` code as possible, opting for safer abstractions.
This will break code like:
fn f(x: &mut int) {}
let mut a = box 1i;
f(a);
Change it to:
fn f(x: &mut int) {}
let mut a = box 1i;
f(&mut *a);
RFC 33; issue #10504.
[breaking-change]
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
The aim of these changes is not working out a generic bi-endianness architectures support but to allow people develop for little endian MIPS machines (issue #7190).
This creates a stability baseline for all crates that we distribute that are not `std`. In general, all library code must start as experimental and progress in stages to become stable.
This patch consolidates and cleans up the task spawning APIs:
* Removes the problematic `future_result` method from `std::task::TaskBuilder`,
and adds a `try_future` that both spawns the task and returns a future
representing its eventual result (or failure).
* Removes the public `opts` field from `TaskBuilder`, instead adding appropriate
builder methods to configure the task.
* Adds extension traits to libgreen and libnative that add methods to
`TaskBuilder` for spawning the task as a green or native thread.
Previously, there was no way to benefit from the `TaskBuilder` functionality and
also set the scheduler to spawn within.
With this change, all task spawning scenarios are supported through the
`TaskBuilder` interface.
Closes#3725.
[breaking-change]
The following features have been removed
* box [a, b, c]
* ~[a, b, c]
* box [a, ..N]
* ~[a, ..N]
* ~[T] (as a type)
* deprecated_owned_vector lint
All users of ~[T] should move to using Vec<T> instead.
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
This grows a new option inside of rustdoc to add the ability to submit examples
to an external website. If the `--markdown-playground-url` command line option
or crate doc attribute `html_playground_url` is present, then examples will have
a button on hover to submit the code to the playground specified.
This commit enables submission of example code to play.rust-lang.org. The code
submitted is that which is tested by rustdoc, not necessarily the exact code
shown in the example.
Closes#14654
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
Because IPv4 address conversion doesn't consider big-endian target, I add functions to handle that.
These function names may need to be changed, but I can't come up with a good one.
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes#12019
[breaking-change]
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
This plugs a leak where resolve was treating enums defined in parent modules as
in-scope for all children modules when resolving a pattern identifier. This
eliminates the code path in resolve entirely.
If this breaks any existing code, then it indicates that the variants need to be
explicitly imported into the module.
Closes#14221
[breaking-change]
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
Closes#14231 (mk: Don't run benchmarks with `make check`)
Closes#14215 (std: Modify TempDir to not fail on drop. Closes#12628)
Closes#14211 (rustdoc: functions in ffi blocks are unsafe)
Closes#14210 (Make Vec.truncate() resilient against failure in Drop)
Closes#14208 (Make `from_bits` in `bitflags!` safe; add `from_bits_truncate`)
Closes#14206 (Register new snapshots)
Closes#14205 (use sched_yield on linux and freebsd)
Closes#14204 (Add a crate for missing stubs from libcore)
Closes#14203 (shootout-mandelbrot: Either 10-20% or 80-100% improvement.)
Closes#14202 (Add flow-graph visualization (via graphviz) to rustc)
Closes#14201 (Render not_found with an absolute path to the rust stylesheet)
Closes#14200 (std cleanup)
Closes#14189 (Implement cell::clone_ref)
