Fix cloning from a BitSet with a different domain size
The previous implementation incorrectly assumed that the
number of words in a bit set is equal to the domain size.
The new implementation delegates to `Vec::clone_from` which
is specialized for `Copy` elements.
Fixes#99006.
Allow try-perf branch to run in CI
We want to be able to build artifacts through the try-perf branch but without this change the CI fails early.
r? `@Mark-Simulacrum`
Implement network primitives with ideal Rust layout, not C system layout
This PR is the result of this internals forum thread: https://internals.rust-lang.org/t/why-are-socketaddrv4-socketaddrv6-based-on-low-level-sockaddr-in-6/13321.
Instead of basing `std:::net::{Ipv4Addr, Ipv6Addr, SocketAddrV4, SocketAddrV6}` on system (C) structs, they are encoded in a more optimal and idiomatic Rust way.
This changes the public API of std by introducing structural equality impls for all four types here, which means that `match ipv4addr { SOME_CONSTANT => ... }` will now compile, whereas previously this was an error. No other intentional changes are introduced to public API.
It's possible to observe the current layout of these types (e.g., by pointer casting); most but not all libraries which were found by Crater to do this have had updates issued and affected versions yanked. See report below.
### Benefits of this change
- It will become possible to move these fundamental network types from `std` into `core` ([RFC](https://github.com/rust-lang/rfcs/pull/2832)).
- Some methods that can't be made `const fn`s today can be made `const fn`s with this change.
- `SocketAddrV4` only occupies 6 bytes instead of 16 bytes.
- These simple primitives become easier to read and uses less `unsafe`.
- Makes these types support structural equality, which means you can now (for instance) match an `Ipv4Addr` against a constant
### ~Remaining~ Previous problems
This change obviously changes the memory layout of the types. And it turns out some libraries invalidly assumes the memory layout and does very dangerous pointer casts to convert them. These libraries will have undefined behaviour and perform invalid memory access until patched.
- [x] - `mio` - Issue: https://github.com/tokio-rs/mio/issues/1386.
- [x] `0.7` branch https://github.com/tokio-rs/mio/pull/1388
- [x] `0.7.6` published https://github.com/tokio-rs/mio/pull/1398
- [x] Yank all `0.7` versions older than `0.7.6`
- [x] Report `<0.7.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0081.html
- [x] - `socket2` - Issue: https://github.com/rust-lang/socket2-rs/issues/119.
- [x] `0.3.x` branch https://github.com/rust-lang/socket2-rs/pull/120
- [x] `0.3.16` published
- [x] `master` branch https://github.com/rust-lang/socket2-rs/pull/122
- [x] Yank all `0.3` versions older than `0.3.16`
- [x] Report `<0.3.16` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0079.html
- [x] - `net2` - Issue: https://github.com/deprecrated/net2-rs/issues/105
- [x] https://github.com/deprecrated/net2-rs/pull/106
- [x] `0.2.36` published
- [x] Yank all `0.2` versions older than `0.2.36`
- [x] Report `<0.2.36` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0078.html
- [x] - `miow` - Issue: https://github.com/yoshuawuyts/miow/issues/38
- [x] `0.3.x` - https://github.com/yoshuawuyts/miow/pull/39
- [x] `0.3.6` published
- [x] `0.2.x` - https://github.com/yoshuawuyts/miow/pull/40
- [x] `0.2.2` published
- [x] Yanked all `0.2` versions older than `0.2.2`
- [x] Yanked all `0.3` versions older than `0.3.6`
- [x] Report `<0.2.2` and `<0.3.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0080.html
- [x] - `quinn master` (aka what became 0.7) - https://github.com/quinn-rs/quinn/issues/968https://github.com/quinn-rs/quinn/pull/987
- [x] - `quinn 0.6` - https://github.com/quinn-rs/quinn/pull/1045
- [x] - `quinn 0.5` - https://github.com/quinn-rs/quinn/pull/1046
- [x] - Release `0.7.0`, `0.6.2` and `0.5.4`
- [x] - `nb-connect` - https://github.com/smol-rs/nb-connect/issues/1
- [x] - Release `1.0.3`
- [x] - Yank all versions older than `1.0.3`
- [x] - `shadowsocks-rust` - https://github.com/shadowsocks/shadowsocks-rust/issues/462
- [ ] - `rio` - https://github.com/spacejam/rio/issues/44
- [ ] - `seaslug` - https://github.com/spacejam/seaslug/issues/1
#### Fixed crate versions
All crates I have found that assumed the memory layout have been fixed and published. The crates and versions that will continue working even as/if this PR is merged is (please upgrade these to help unblock this PR):
* `net2 0.2.36`
* `socket2 0.3.16`
* `miow 0.2.2`
* `miow 0.3.6`
* `mio 0.7.6`
* `mio 0.6.23` - Never had the invalid assumption itself, but has now been bumped to only allow fixed dependencies (`net2` + `miow`)
* `nb-connect 1.0.3`
* `quinn 0.5.4`
* `quinn 0.6.2`
### Release notes draft
This release changes the memory layout of `Ipv4Addr`, `Ipv6Addr`, `SocketAddrV4` and `SocketAddrV6`. The standard library no longer implements these as the corresponding `libc` structs (`sockaddr_in`, `sockaddr_in6` etc.). This internal representation was never exposed, but some crates relied on it anyway by unsafely transmuting. This change will cause those crates to make invalid memory accesses. Notably `net2 <0.2.36`, `socket2 <0.3.16`, `mio <0.7.6`, `miow <0.3.6` and a few other crates are affected. All known affected crates have been patched and have had fixed versions published over a year ago. If any affected crate is still in your dependency tree, you need to upgrade them before using this version of Rust.
Rollup of 5 pull requests
Successful merges:
- #99186 (Use LocalDefId for closures more)
- #99741 (Use `impl`'s generics when suggesting fix on bad `impl Copy`)
- #99844 (Introduce an ArchiveBuilderBuilder)
- #99921 (triagebot.yml: CC Enselic when rustdoc-json-types changes)
- #99974 (Suggest removing a semicolon and boxing the expressions for if-else)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Suggest removing a semicolon and boxing the expressions for if-else
`InferCtxt::suggest_remove_semi_or_return_binding` was not working well, so I fixed it and added a ui test.
triagebot.yml: CC Enselic when rustdoc-json-types changes
Being the maintainer of [cargo-public-api](https://github.com/Enselic/cargo-public-api) which relies on [rustdoc JSON](https://github.com/rust-lang/rust/issues/76578) means I have high stakes in the rustdoc JSON format itself. Would be great if I could be pinged when the format is about to change.
I hope this is OK. Big thanks in advance.
Introduce an ArchiveBuilderBuilder
This avoids monomorphizing all linker code for each codegen backend and will allow passing in extra information to the archive builder from the codegen backend. I'm going to use this in https://github.com/rust-lang/rust/pull/97485 to allow passing in the right function to extract symbols from object files to a generic archive builder to be used by cg_llvm, cg_clif and cg_gcc.
Use `impl`'s generics when suggesting fix on bad `impl Copy`
See the UI test for a more complicated example, but we weren't correctly suggesting to add bounds given a manual `impl` whose generics didn't match the struct generics.
```rust
#[derive(Clone)]
struct Wrapper<T>(T);
impl<S> Copy for Wrapper<S> {}
```
Coincidentally this fix didn't cause any regressions for `derive(Copy)` impls, I think because those use the same spans in the impl generics as the struct generics, so the machinery still applies the same change.
Rewrite Windows `compat_fn` macro
This allows using most delay loaded functions before the init code initializes them. It also only preloads a select few functions, rather than all functions.
This is optimized for the common case where a function is used after already being loaded (or failed to load). The only change in codegen at the call site is to use an atomic load instead of a plain load, which should have negligible or no impact.
I've split the old `compat_fn` macro in two so as not to mix two different use cases. If/when Windows 7 support is dropped `compat_fn_optional` can be removed entirely.
r? rust-lang/libs
Fix the size of niche enums with ZST alignment
For enums with an aligned ZST variant, like `[T; 0]`, the niche layout
was not computing a sufficient size to be consistent with alignment. Now
we pad that size up to the alignment, and also make sure to only use the
niche variant's ABI when the size and alignment still match.
Fixes#99836
r? `@eddyb`
Also gate AllocatedPointer and AllocAlign definitions by LLVM_VERSION_GE
Fixes a warning:
```
warning: llvm-wrapper/RustWrapper.cpp:159:11: warning: enumeration values 'AllocatedPointer' and 'AllocAlign' not handled in switch [-Wswitch]
warning: switch (Kind) {
warning: ^
```
Which was fall out from 130a1df71e.
Fixes#99955
For enums with an aligned ZST variant, like `[T; 0]`, the niche layout
was not computing a sufficient size to be consistent with alignment. Now
we pad that size up to the alignment, and also make sure to only use the
niche variant's ABI when the size and alignment still match.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Fixes a warning:
warning: llvm-wrapper/RustWrapper.cpp:159:11: warning: enumeration values 'AllocatedPointer' and 'AllocAlign' not handled in switch [-Wswitch]
warning: switch (Kind) {
warning: ^
Which was fall out from 130a1df71e.
Add diagnostic when using public instead of pub
Forwarding from https://github.com/rust-lang/rust/pull/99706
I accidentally broke something(??) in git and the commits in that PR are absolutely not what I did in that branch
Anyways, this is the PR for this now. Adding tests again in a minute.
cc `@davidtwco`
Improve type mismatch w/ function signatures
This PR makes use of `note: expected/found` (instead of labeling types in labels) in type mismatch with function signatures. Pros: it's easier to compare the signatures, cons: the error is a little more verbose now.
This is especially nice when
- The signatures differ in a small subset of parameters (same parameters are elided)
- The difference is in details, for example `isize` vs `usize` (there is a better chance that the types align)
Also this PR fixes the inconsistency in variable names in the edited code (`expected` and `found`).
A zulip thread from which this pr started: [[link]](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Type.20error.20regression.3F.2E.2E.2E/near/289756602).
An example diagnostic:
<table>
<tr>
<th>this pr</th>
<th>nightly</th>
</tr>
<tr>
<td>
```text
error[E0631]: type mismatch in function arguments
--> ./t.rs:4:12
|
4 | expect(&f);
| ------ ^^ expected due to this
| |
| required by a bound introduced by this call
...
10 | fn f(_: isize, _: u8, _: Vec<u32>) {}
| ---------------------------------- found signature defined here
|
= note: expected function signature `fn(usize, _, Vec<u64>) -> _`
found function signature `fn(isize, _, Vec<u32>) -> _`
note: required because of the requirements on the impl of `Trait` for `fn(isize, u8, Vec<u32>) {f}`
--> ./t.rs:8:9
|
8 | impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
| ^^^^^ ^
= note: required for the cast from `fn(isize, u8, Vec<u32>) {f}` to the object type `dyn Trait`
```
</td>
<td>
```text
error[E0631]: type mismatch in function arguments
--> ./t.rs:4:12
|
4 | expect(&f);
| ------ ^^ expected signature of `fn(usize, u8, Vec<u64>) -> _`
| |
| required by a bound introduced by this call
...
10 | fn f(_: isize, _: u8, _: Vec<u32>) {}
| ---------------------------------- found signature of `fn(isize, u8, Vec<u32>) -> _`
|
note: required because of the requirements on the impl of `Trait` for `fn(isize, u8, Vec<u32>) {f}`
--> ./t.rs:8:9
|
8 | impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
| ^^^^^ ^
= note: required for the cast to the object type `dyn Trait`
```
</td>
</tr>
</table>
<details><summary>code</summary>
<p>
```rust
fn main() {
fn expect(_: &dyn Trait) {}
expect(&f);
}
trait Trait {}
impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
fn f(_: isize, _: u8, _: Vec<u32>) {}
```
</p>
</details>
r? `@compiler-errors`
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
use `check_region_obligations_and_report_errors` to avoid ICEs
If we don't call `process_registered_region_obligations` before `resolve_regions_and_report_errors` then we'll ICE if we have any region obligations, and `check_region_obligations_and_report_errors` just does both of these for us in a nice convenient function.
Fixes#53475
r? types
proc_macro: use crossbeam channels for the proc_macro cross-thread bridge
This is done by having the crossbeam dependency inserted into the `proc_macro` server code from the server side, to avoid adding a dependency to `proc_macro`.
In addition, this introduces a -Z command-line option which will switch rustc to run proc-macros using this cross-thread executor. With the changes to the bridge in #98186, #98187, #98188 and #98189, the performance of the executor should be much closer to same-thread execution.
In local testing, the crossbeam executor was substantially more performant than either of the two existing `CrossThread` strategies, so they have been removed to keep things simple.
r? `@eddyb`
Rollup of 8 pull requests
Successful merges:
- #99227 (Fix thumbv4t-none-eabi frame pointer setting)
- #99518 (Let-else: break out scopes when a let-else pattern fails to match)
- #99671 (Suggest dereferencing index when trying to use a reference of usize as index)
- #99831 (Add Fuchsia platform support documentation)
- #99881 (fix ICE when computing codegen_fn_attrs on closure with non-fn parent)
- #99888 (Streamline lint checking)
- #99891 (Adjust an expr span to account for macros)
- #99904 (Cleanup html whitespace)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Stage 1 check has been supported since https://github.com/rust-lang/rust/pull/81064.
#81064 changed the error message for this, but I don't think there's any reason we should prevent using it.
I tested locally and `keep-stage` works fine. Don't give a hard error when trying to use it.
