new lint: `single_char_lifetime_names`
This pull request adds a lint against single character lifetime names, as they might not divulge enough information about the purpose of the lifetime. This can make code harder to understand. I placed this in `restriction` rather than `pedantic` (as suggested in #8233) since most of the Rust ecosystem already uses single character lifetime names (to my knowledge, at least) and since single character lifetime names aren't incorrect. I'd be happy to change this upon request, however. Fixes#8233.
- [x] Followed lint naming conventions
- [x] Added passing UI tests (including committed `.stderr` file)
- [x] `cargo test` passes locally
- [x] Executed `cargo dev update_lints`
- [x] Added lint documentation
- [x] Run `cargo dev fmt`
changelog: new lint: [`single_char_lifetime_names`]
This pull request adds a lint against single character lifetime names, as they might not divulge enough information about the purpose of the lifetime. This can make code harder to understand. I placed this in `restriction` rather than `pedantic` (as suggested in #8233) since most of the Rust ecosystem already uses single character lifetime names (to my knowledge, at least) and since single character lifetime names aren't incorrect. I'd be happy to change this upon request, however. Fixes#8233.
- [x] Followed lint naming conventions
- [x] Added passing UI tests (including committed `.stderr` file)
- [x] `cargo test` passes locally
- [x] Executed `cargo dev update_lints`
- [x] Added lint documentation
- [x] Run `cargo dev fmt`
changelog: new lint: [`single_char_lifetime_names`]
Set binary-dep-depinfo in .cargo/config.toml
Fixes#8248
According to https://doc.rust-lang.org/cargo/reference/unstable this
seems to be the right place to set it, and it does fix the build for me.
I haven't removed the other `rustflags` because perhaps it's needed on
different cargo/rust versions?
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: none
Fixes#8248
According to https://doc.rust-lang.org/cargo/reference/unstable this
seems to be the right place to set it, and it does fix the build for me.
I haven't removed the other `rustflags` because perhaps it's needed on
different cargo/rust versions?
Change `unnecessary_to_owned` `into_iter` suggestions to `MaybeIncorrect`
I am having a hard time finding a good solution for #8148, so I am wondering if is enough to just change the suggestion's applicability to `MaybeIncorrect`?
I apologize, as I realize this is a bit of a cop out.
changelog: none
Allow running lintcheck with a renamed rust-clippy dir
I have Clippy checked out in `rust/clippy` rather than `rust/rust-clippy`, this allows lintcheck to still run in that case
changelog: none
Better detect when a field can be moved from in `while_let_on_iterator`
fixes#8113
changelog: Better detect when a field can be moved from in `while_let_on_iterator`
Fix `type_repetition_in_bounds`
fixes#7360fixes#8162fixes#8056
changelog: Check for full equality in `type_repetition_in_bounds` rather than just equal hashes
Remove in_macro from clippy_utils
changelog: none
Previously done in #7897 but reverted in #8170. I'd like to keep `in_macro` out of utils because if a span is from expansion in any way (desugaring or macro), we should not proceed without understanding the nature of the expansion IMO.
r? `@llogiq`
New macro utils
changelog: none
Sorry, this is a big one. A lot of interrelated changes and I wanted to put the new utils to use to make sure they are somewhat battle-tested. We may want to divide some of the lint-specific refactoring commits into batches for smaller reviewing tasks. I could also split into more PRs.
Introduces a bunch of new utils at `clippy_utils::macros::...`. Please read through the docs and give any feedback! I'm happy to introduce `MacroCall` and various functions to retrieve an instance. It feels like the missing puzzle piece. I'm also introducing `ExpnId` from rustc as "useful for Clippy too". `@rust-lang/clippy`
Fixes#7843 by not parsing every node of macro implementations, at least the major offenders.
I probably want to get rid of `is_expn_of` at some point.
changelog: none
Sorry, this is a big one. A lot of interrelated changes and I wanted to put the new utils to use to make sure they are somewhat battle-tested. We may want to divide some of the lint-specific refactoring commits into batches for smaller reviewing tasks. I could also split into more PRs.
Introduces a bunch of new utils at `clippy_utils::macros::...`. Please read through the docs and give any feedback! I'm happy to introduce `MacroCall` and various functions to retrieve an instance. It feels like the missing puzzle piece. I'm also introducing `ExpnId` from rustc as "useful for Clippy too". `@rust-lang/clippy`
Fixes#7843 by not parsing every node of macro implementations, at least the major offenders.
I probably want to get rid of `is_expn_of` at some point.
Fix `clippy::use-self`` warning in ` src/main.rs`
`ClippyCmd` warnings gets generated due to addition of `clippy::use-self`. This PR fixes that.
```
warning: unnecessary structure name repetition
--> src/main.rs:99:9
|
99 | ClippyCmd {
| ^^^^^^^^^ help: use the applicable keyword: `Self`
|
= note: `-W clippy::use-self` implied by `-W clippy::nursery`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#use_self
```
---
changelog: none
[`erasing_op`] lint ignored when operation `Output` type is different from the type of constant `0`
fixes#7210
changelog: [`erasing_op`] lint ignored when operation `Output` type is different from the type of constant `0`
wrong_self_convention: Match `SelfKind::No` more restrictively
The `wrong_self_convention` lint uses a `SelfKind` type to decide
whether a method has the right kind of "self" for its name, or whether
the kind of "self" it has makes its name confusable for a method in
a common trait. One possibility is `SelfKind::No`, which is supposed
to mean "No `self`".
Previously, SelfKind::No matched everything _except_ Self, including
references to Self. This patch changes it to match Self, &Self, &mut
Self, Box<Self>, and so on.
For example, this kind of method was allowed before:
```
impl S {
// Should trigger the lint, because
// "methods called `is_*` usually take `self` by reference or no `self`"
fn is_foo(&mut self) -> bool { todo!() }
}
```
But since SelfKind::No matched "&mut self", no lint was triggered
(see #8142).
With this patch, the code above now gives a lint as expected.
fixes#8142
changelog: [`wrong_self_convention`] rejects `self` references in more cases
return_self_not_must_use document `#[must_use]` on the type
Inspired by a discussion in rust-lang/rust-clippy#8197
---
r? `@llogiq`
changelog: none
The lint is this on nightly, therefore no changelog entry for you xD
Inspired by a discussion in rust-lang/rust-clippy#8197
---
r? `@llogiq`
changelog: none
The lint is this on nightly, therefore no changelog entry for you xD
The `wrong_self_convention` lint uses a `SelfKind` type to decide
whether a method has the right kind of "self" for its name, or whether
the kind of "self" it has makes its name confusable for a method in
a common trait. One possibility is `SelfKind::No`, which is supposed
to mean "No `self`".
Previously, SelfKind::No matched everything _except_ Self, including
references to Self. This patch changes it to match Self, &Self, &mut
Self, Box<Self>, and so on.
For example, this kind of method was allowed before:
```
impl S {
// Should trigger the lint, because
// "methods called `is_*` usually take `self` by reference or no `self`"
fn is_foo(&mut self) -> bool { todo!() }
}
```
But since SelfKind::No matched "&mut self", no lint was triggered
(see #8142).
With this patch, the code above now gives a lint as expected.
Fixes#8142
changelog: [`wrong_self_convention`] rejects `self` references in more cases
Extend unused_io_amount to cover async io.
Clippy helpfully warns about code like this, telling you that you
probably meant "write_all":
fn say_hi<W:Write>(w: &mut W) {
w.write(b"hello").unwrap();
}
This patch attempts to extend the lint so it also covers this
case:
async fn say_hi<W:AsyncWrite>(w: &mut W) {
w.write(b"hello").await.unwrap();
}
(I've run into this second case several times in my own programming,
and so have my coworkers, so unless we're especially accident-prone
in this area, it's probably worth addressing?)
Since this is my first attempt at a clippy patch, I've probably
made all kinds of mistakes: please help me fix them? I'd like
to learn more here.
Open questions I have:
* Should this be a separate lint from unused_io_amount? Maybe
unused_async_io_amount? If so, how should I structure their
shared code?
* Should this cover tokio's AsyncWrite too?
* Is it okay to write lints for stuff that isn't part of
the standard library? I see that "regex" also has lints,
and I figure that "futures" is probably okay too, since it's
an official rust-lang repository.
* What other tests are needed?
* How should I improve the code?
Thanks for your time!
---
changelog: [`unused_io_amount`] now supports async read and write traits
This improves the quality of the genrated output and makes it
more in line with other lint messages.
changelog: [`unused_io_amount`]: Improve help text
Clippy helpfully warns about code like this, telling you that you
probably meant "write_all":
fn say_hi<W:Write>(w: &mut W) {
w.write(b"hello").unwrap();
}
This patch attempts to extend the lint so it also covers this
case:
async fn say_hi<W:AsyncWrite>(w: &mut W) {
w.write(b"hello").await.unwrap();
}
(I've run into this second case several times in my own programming,
and so have my coworkers, so unless we're especially accident-prone
in this area, it's probably worth addressing?)
This patch covers the Async{Read,Write}Ext traits in futures-rs,
and in tokio, since both are quite widely used.
changelog: [`unused_io_amount`] now supports AsyncReadExt and AsyncWriteExt.
Limit the ``[`identity_op`]`` lint to integral operands.
changelog: limit ``[`identity_op`]`` to integral operands
In the ``[`identity_op`]`` lint, if the operands are non-integers, then the lint is likely
wrong.
Fixed issues with to_radians and to_degrees lints
fixes#7651
I fixed the original problem as described in the issue, but the bug remains for complex expressions (the commented out TC I added is an example). I would also love some feedback on how to cleanup my code and reduce duplication. I hope it's not a problem that the issue has been claimed by someone else - that was over two months ago.
changelog: ``[`suboptimal_flops`]`` no longer proposes broken code with `to_radians` and `to_degrees`
