Move a local to the `#if` block where it is used
For other cases (LLVM < 17), this was complaining under `-Wall`:
```
warning: llvm-wrapper/PassWrapper.cpp: In function ‘void LLVMRustPrintTargetCPUs(LLVMTargetMachineRef, const char*)’:
warning: llvm-wrapper/PassWrapper.cpp:311:26: warning: unused variable ‘MCInfo’ [-Wunused-variable]
warning: 311 | const MCSubtargetInfo *MCInfo = Target->getMCSubtargetInfo();
warning: | ^~~~~~
```
compile rust-anaylzer with `x check` if it's enabled
By default, `x check` doesn't compile the rust-analyzer. But when it's enabled in the config's tools section, there's no reason not to do it. This change allows `x check` to compile rust-analyzer if it's enabled in config's tools section.
Helps to #115031
Correct and expand documentation of `handle_alloc_error` and `set_alloc_error_hook`.
The primary goal of this change is to remove the false claim that `handle_alloc_error` always aborts; instead, code should be prepared for `handle_alloc_error` to possibly unwind, and be sound under that condition.
I saw other opportunities for improvement, so I have added all the following information:
* `handle_alloc_error` may panic instead of aborting. (Fixes#114898)
* What happens if a hook returns rather than diverging.
* A hook may panic. (This was already demonstrated in an example, but not stated in prose.)
* A hook must be sound to call — it cannot assume that it is only called by the runtime, since its function pointer can be retrieved by safe code.
I've checked these statements against the source code of `alloc` and `std`, but there may be nuances I haven't caught, so a careful review is welcome.
coverage: Tidy up `run-coverage` tests in several small ways
Prior to #114875 (anonymized line numbers), these tests were very sensitive to lines being added/removed, since doing so would change the line numbers in every subsequent line of output. Therefore they ended up with a few small style issues that weren't worth the hassle of fixing.
Now that we can freely rearrange lines without needing to re-bless the entire output, we can tidy up the tests in various trivial ways.
Go into more detail about panicking in drop.
This patch was sitting around in my drafts. I don't recall the motivation, but I think it was someone expressing confusion over “will likely abort” (since, in fact, a panicking drop _not_ caused by dropping while panicking will predictably _not_ abort).
I hope that the new text will leave people well-informed about why not to panic and when it is reasonable to panic.
Point at type parameter that introduced unmet bound instead of full HIR node
```
error[E0277]: the size for values of type `[i32]` cannot be known at compilation time
--> $DIR/issue-87199.rs:18:15
|
LL | ref_arg::<[i32]>(&[5]);
| ^^^^^ doesn't have a size known at compile-time
```
instead of
```
error[E0277]: the size for values of type `[i32]` cannot be known at compilation time
--> $DIR/issue-87199.rs:18:22
|
LL | ref_arg::<[i32]>(&[5]);
| ---------------- ^^^^ doesn't have a size known at compile-time
| |
| required by a bound introduced by this call
```
------
```
error[E0277]: the trait bound `String: Copy` is not satisfied
--> $DIR/own-bound-span.rs:14:24
|
LL | let _: <S as D>::P<String>;
| ^^^^^^ the trait `Copy` is not implemented for `String`
|
note: required by a bound in `D::P`
--> $DIR/own-bound-span.rs:4:15
|
LL | type P<T: Copy>;
| ^^^^ required by this bound in `D::P`
```
instead of
```
error[E0277]: the trait bound `String: Copy` is not satisfied
--> $DIR/own-bound-span.rs:14:12
|
LL | let _: <S as D>::P<String>;
| ^^^^^^^^^^^^^^^^^^^ the trait `Copy` is not implemented for `String`
|
note: required by a bound in `D::P`
--> $DIR/own-bound-span.rs:4:15
|
LL | type P<T: Copy>;
| ^^^^ required by this bound in `D::P`
```
Fix#105306.
Remove lub_empty from lexical region resolve
As of my understanding this method made sense when we had `ReEmpty`.
Removed `lub_empty` and made the calling site code equivalent.
r? `@lcnr` `@compiler-errors`
Fix waiting on a query that panicked
This fixes waiting on a query that panicked. The code now looks for `QueryResult::Poisoned` in the query state in addition to the query cache. This fixes https://github.com/rust-lang/rust/issues/111528.
r? `@cjgillot`
Rollup of 4 pull requests
Successful merges:
- #115197 (Remove special cases that are no longer needed due to #112606)
- #115210 (Make `rustc_on_unimplemented` std-agnostic for `alloc::rc`)
- #115237 (Fixup sparc-unknown-none-elf table spacing)
- #115244 (Migrate GUI colors test to original CSS color format)
r? `@ghost`
`@rustbot` modify labels: rollup
Make `rustc_on_unimplemented` std-agnostic for `alloc::rc`
See https://github.com/rust-lang/rust/issues/112923
Just a few lines related to `alloc:rc` for `Send` and `Sync`.
That seems to be all of the `... = "std::..."` issues found, but there a few notes with `std::` inside them still.
r? `@WaffleLapkin`
Revert "Use the same DISubprogram for each instance of the same inline function within the caller"
This reverts commit 687bffa493.
Reverting to resolve ICEs reported on nightly.
cc `@dpaoliello`
Fixes#115156
Stop emitting non-power-of-two vectors in (non-portable-SIMD) codegen
Fixes#115212
It's unclear what makes this not work sometimes, since it often *does* work, so for now just disable the unusual cases. A future PR can consider doing something smarter, but this is an easy and safe tweak that we can do to resolve the regressions for now.
These changes were made by manually running `rustfmt` on all of the test files,
and then manually undoing all cases where the original formatting appeared to
have been deliberate.
`rustfmt +nightly --config-path=/dev/null --edition=2021 tests/run-coverage*/**/*.rs`
Prior to #114875, these tests were very sensitive to lines being added/removed,
so the migration to `run-coverage` in #112300 tried hard to avoid disturbing
the existing line numbers. That resulted in some awkward reshuffling when
certain comments/directives needed to be added or moved.
Now that we don't have to worry about preserving line numbers, we can rearrange
those comments into a more conventional layout.
When one of these tests fails, any compiler warnings will be printed to the
console, which makes it harder to track down the actual reason for failure.
(The outstanding warnings were found by temporarily adding `-Dwarnings` to the
compiler arguments for `RunCoverage` in `src/tools/compiletest/src/runtest.rs`.)
On the following example, point at `String` instead of the whole type:
```
error[E0277]: the trait bound `String: Copy` is not satisfied
--> $DIR/own-bound-span.rs:14:24
|
LL | let _: <S as D>::P<String>;
| ^^^^^^ the trait `Copy` is not implemented for `String`
|
note: required by a bound in `D::P`
--> $DIR/own-bound-span.rs:4:15
|
LL | type P<T: Copy>;
| ^^^^ required by this bound in `D::P`
```
Add a new helper to avoid calling io::Error::kind
On `cfg(unix)`, `Error::kind` emits an enormous jump table that LLVM seems unable to optimize out. I don't really understand why, but see for yourself: https://godbolt.org/z/17hY496KG
This change lets us check for `ErrorKind::Interrupted` without going through a big match. I've checked the codegen locally, and it has the desired effect on the codegen for `BufReader::read_exact`.
Add missing high-level stable_mir::generics_of fn
We forgot to add this function in https://github.com/rust-lang/rust/pull/115092, as we have done on https://github.com/rust-lang/rust/pull/115084 and other high level APIs.
At some point I think we should re-organize the structure of the code but this is what we have for now.
r? `@compiler-errors`
Would have assigned `@oli-obk` but he is still on vacations
Walk through full path in `point_at_path_if_possible`
We already had sufficient information to point at the `[u8]` in `Option::<[u8]>::None` (the `fallback_param_to_point_at` parameter), we just were neither using it nor walking through hir paths sufficiently to encounter it.
This should alleviate the need to add additional logic to extract params in a somewhat arbitrary manner of looking at the grandparent def path: https://github.com/rust-lang/rust/pull/115219#discussion_r1305946358
r? `@estebank`
Add stable for Constant in smir
Previously https://github.com/rust-lang/rust/pull/114587 we covered much of the groundwork needed to cover Const in smir, so there is no reason keep `Constant` as String.
r? `@spastorino`
