debug_assert to ensure that from_raw_parts is only used properly aligned
This does not help nearly as much as I would hope because everybody uses the distributed libstd which is compiled without debug assertions. For this reason, I am not sure if this is even worth it. OTOH, this would have caught the misalignment fixed by https://github.com/rust-lang/rust/issues/42789 *if* there had been any tests actually using ZSTs with alignment >1 (we have a CI runner which has debug assertions in libstd enabled), and it seems to currently [fail in the rg testsuite](https://ci.appveyor.com/project/rust-lang/rust/build/1.0.8403/job/v7dfdcgn8ay5j6sb). So maybe it is worth it, after all.
I have seen the attribute `#[rustc_inherit_overflow_checks]` in some places, does that make it so that the *caller's* debug status is relevant? Is there a similar attribute for `debug_assert!`? That could even subsume `rustc_inherit_overflow_checks`: Something like `rustc_inherit_debug_flag` could affect *all* places that change the generated code depending on whether we are in debug or release mode. In fact, given that we have to keep around the MIR for generic functions anyway, is there ever a reason *not* to handle the debug flag that way? I guess currently we apply debug flags like `cfg` so this is dropped early during the MIR pipeline?
EDIT: I learned from @eddyb that because of how `debug_assert!` works, this is not realistic. Well, we could still have it for the rustc CI runs and then maybe, eventually, when libstd gets compiled client-side and there is both a debug and a release build... then this will also benefit users.^^
std: stop backtracing when the frames are full
This is a defensive measure to mitigate the infinite unwind loop seen in #53372. That case will still repeatedly unwind `__rust_try`, but now it will at least stop when `cx.frames` is full.
r? @alexcrichton
[NLL] Returns are interesting for free regions
Based on #53088 - creating now to get feedback.
Closes#51175
* Make assigning to the return type interesting.
* Use "returning this value" instead of "return" in error messages.
* Prefer one of the explanations that we have a name for to a generic interesting cause in some cases.
* Treat causes that involve the destination of a call like assignments.
Non-naive implementation of `VecDeque.append`
Replaces the old, simple implementation with a more manual (and **unsafe** 😱) one. I've added 1 more test and verified that it covers all 6 code paths in the function.
This new implementation was about 60% faster than the old naive one when I tried benchmarking it.
Set more llvm function attributes for __rust_try
This shim is generated elsewhere in the compiler so this commit adds support to
ensure it goes through similar paths as the rest of the compiler to set llvm
function attributes like target features.
cc #53372
Make some ported cfail tests robust w.r.t. NLL
Updated the most glaring instances of weak tests w.r.t. NLL that came from #53196.
See also the bulletpoint list on #53351.
Rollup of 11 pull requests
Successful merges:
- #52858 (Implement Iterator::size_hint for Elaborator.)
- #53321 (Fix usage of `wasm_target_feature`)
- #53326 ([nll] add regression test for issue #27868)
- #53347 (rustc_resolve: don't allow paths starting with `::crate`.)
- #53349 ([nll] add tests for #48697 and #30104)
- #53357 (Pretty print btreemap for GDB)
- #53358 (`{to,from}_{ne,le,be}_bytes` for unsigned integer types)
- #53406 (Do not suggest conversion method that is already there)
- #53407 (make more ported compile fail tests more robust w.r.t. NLL)
- #53413 (Warn that `#![feature(rust_2018_preview)]` is implied when the edition is set to Rust 2018.)
- #53434 (wasm: Remove --strip-debug argument to LLD)
Failed merges:
r? @ghost
wasm: Remove --strip-debug argument to LLD
Originally added in #52887 this commit disables passing `--strip-debug` to LLD
when optimized. This bring back the original bug of emitting broken debuginfo
but currently it *also* strips the `name` section which makes it very difficult
to inspect the final binary. A real fix is happening at
https://reviews.llvm.org/D50729 and we can reevaluate once we've updated LLD to
have that commit.
make more ported compile fail tests more robust w.r.t. NLL
This is similar to PR #53369, except it covers a disjoint (and much smaller) set of tests that I needed to look at more carefully before being 100% certain they were the same kind of issue.
[nll] add tests for #48697 and #30104
Adds tests for the following issues:
- #48697 ``[NLL] ICE: unexpected region for local data with reference to closure``
- #30104 ``Destructuring boxes into multiple mutable references seems broken``
r? @nikomatsakis
[nll] add regression test for issue #27868
Adds a test for #27868 ``Inconsistent evaluation order for assignment operations``
apart of #47366 ``tracking issue for bugs fixed by the MIR borrow checker or NLL``
r? @nikomatsakis
Fix usage of `wasm_target_feature`
Currently usage results in:
```
error: internal compiler error: librustc_typeck/collect.rs:1928: unknown target feature gate wasm_target_feature
thread 'main' panicked at 'Box<Any>', librustc_errors/lib.rs:579:9
note: Run with `RUST_BACKTRACE=1` for a backtrace.
error: aborting due to previous error
note: the compiler unexpectedly panicked. this is a bug.
note: we would appreciate a bug report: https://github.com/rust-lang/rust/blob/master/CONTRIBUTING.md#bug-reports
note: rustc 1.30.0-nightly (d5a448b3f 2018-08-13) running on x86_64-unknown-linux-gnu
note: compiler flags: -C debuginfo=2 -C linker=/tmp/lld-shim -C incremental --crate-type lib
note: some of the compiler flags provided by cargo are hidden
error: Could not compile `coresimd`.
To learn more, run the command again with --verbose.
```
and hopefully this should fix the ICE!
Add crate build test for `thumb*` targets. [IRR-2018-embedded]
## Summary
This PR adds `run-make` test that compiles `cortex-m` crate for all supported `thumb*-none-*` targets using `cargo` and stage2 `rustc`.
- Supported `thumb*-none-*` targets:
- thumbv6m-none-eabi (Bare Cortex-M0, M0+, M1)
- thumbv7em-none-eabi (Bare Cortex-M4, M7)
- thumbv7em-none-eabihf (Bare Cortex-M4F, M7F, FPU, hardfloat)
- thumbv7m-none-eabi (Bare Cortex-M3)
## How to run & Example output
I tested locally and all targets succeeded like below:
```
./x.py clean
./x.py test --target thumbv6m-none-eabi,thumbv7em-none-eabi,thumbv7em-none-eabihf,thumbv7m-none-eabi src/test/run-make
```
```
Check compiletest suite=run-make mode=run-make (x86_64-unknown-linux-gnu -> thumbv6m-none-eabi)
running 5 tests
.....
test result: ok. 5 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out
```
## How to re-run
Remove `stamp` file for the test run.
```
rm build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/stamp
```
Then run `test`
```
./x.py test --target thumbv6m-none-eabi,thumbv7em-none-eabi,thumbv7em-none-eabihf,thumbv7m-none-eabi src/test/run-make
(snip)
running 5 tests
iiii.
test result: ok. 1 passed; 0 failed; 4 ignored; 0 measured; 0 filtered out
```
## Artifacts
You can examine the artifacts under the directory below:
```
sekineh@sekineh-VirtualBox:~/rustme10$ ls -l build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/thumb-none-cortex-m/
total 4
drwxrwxr-x 7 sekineh sekineh 4096 8月 14 22:40 cortex-m
```
where `build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/thumb-none-cortex-m/` is came from TMPDIR variable.
## Other notes
For `test.rs` modification, I used the same logic as:
- d8b3c830fb/src/bootstrap/dist.rs (L652-L657)
```
if builder.no_std(target) == Some(true) {
// the `test` doesn't compile for no-std targets
builder.ensure(compile::Std { compiler, target });
} else {
builder.ensure(compile::Test { compiler, target });
}
```
It is a useful snippet when adding `no_std` support to `src/bootstrap` code.
CC @kennytm @jamesmunns @nerdyvaishali
compile-fail-fulldeps/proc-macro/proc-macro-attributes.rs - resolution change for derive helper attributes with the same name as derive itself
run-pass/macro-comma-support.rs - indeterminate resolutions for macros in expression positions
ui/issues/issue-49074.rs - diagnostics regression, not enough recovery to report the second error
ui/object-lifetime/object-lifetime-default.stderr - unstable diagnostics?
Speed up NLL with HybridIdxSetBuf.
It's a sparse-when-small but dense-when-large index set that is very
efficient for sets that (a) have few elements, (b) have large
universe_size values, and (c) are cleared frequently. Which makes it
perfect for the `gen_set` and `kill_set` sets used by the new borrow
checker.
This patch reduces `tuple-stress`'s NLL-check time by 40%, and up to 12%
for several other benchmarks. And it halves the max-rss for `keccak`,
and has smaller wins for `inflate` and `clap-rs`.
rustc_resolve: overhaul `#![feature(uniform_paths)]` error reporting.
Fixes#53408 by only considering external crates to conflict within their (type/module) namespace, *not* with the value or macro namespaces, and also by adding a special-cased error for redundant `use crate_name;` imports (without actually allowing them).
Also, all canaries for a given import are grouped into one diagnostic per namespace, in order to make block-scoped ambiguities clearer.
See changed/added tests for more details.
r? @petrochenkov cc @aturon @joshtriplett
Visit all attributes for feature collection
Previously feature attributes were just collected on item-like "things" as well as exported macros and crate attributes. This ignored some places feature attributes could be specified, such as on enum variants.
Fixes https://github.com/rust-lang/rust/issues/53391.
This shim is generated elsewhere in the compiler so this commit adds support to
ensure it goes through similar paths as the rest of the compiler to set llvm
function attributes like target features.
cc #53372
Rollup of 10 pull requests
Successful merges:
- #52946 (Documented impl From on line 367 of libserialize/json.rs)
- #53234 (Remove Travis shutdown debug scripts, and remove CI-specific DNS settings)
- #53313 (Two small improvements)
- #53360 (Addressed #51602)
- #53364 (Warn if the user tries to use GATs)
- #53373 (Tweak unclosed delimiter parser error)
- #53377 (std: Use target_pointer_width for BACKTRACE_ELF_SIZE)
- #53395 (Use #[non_exhaustive] on internal enums)
- #53399 (Tidy: ignore non-Markdown files when linting for the Unstable Book)
- #53412 (syntax_ext: remove leftover span_err_if_not_stage0 macro.)
Originally added in #52887 this commit disables passing `--strip-debug` to LLD
when optimized. This bring back the original bug of emitting broken debuginfo
but currently it *also* strips the `name` section which makes it very difficult
to inspect the final binary. A real fix is happening at
https://reviews.llvm.org/D50729 and we can reevaluate once we've updated LLD to
have that commit.
Remove Travis shutdown debug scripts, and remove CI-specific DNS settings
Since the cause of the host shutdown (travis-ci/travis-ci#4924) is found, we could revert the shutdown debug attempts to shorten the logs.
Additionally, we're pretty sure a custom DNS (added in will not help travis-ci/travis-ci#9696, so reverting that part of #51420 to reduce CI-specific settings.
syntax_ext: remove leftover span_err_if_not_stage0 macro.
I believe this is the right fix for #53380, although I'm not sure what happened.
My guess is this copy of the macro was accidentally missed when others were removed?
cc @matthewjasper @varkor (please do not put this in a rollup, in case it fails)
Tidy: ignore non-Markdown files when linting for the Unstable Book
Previously, any file would be assumed a `.md`, which is annoying when files like `.DS_STORE` slip in and then cause tidy errors.
Use #[non_exhaustive] on internal enums
This replaces `__Nonexhaustive` variants (and variants thereof) with `#[non_exhaustive]`. These were mostly unstable previously, with the exception of the `cloudabi` enums and `Level` in proc_macro: these were `#[doc(hidden)]`, so clearly intended not to be used directly. It should be safe to replace all of these.
std: Use target_pointer_width for BACKTRACE_ELF_SIZE
The former code used `target.contains("64")` to detect Elf64 targets,
but this is inaccurate in a few cases:
- `s390x-unknown-linux-gnu` is 64-bit
- `sparcv9-sun-solaris` is 64-bit
- `x86_64-unknown-linux-gnux32` is 32-bit
Instead the `std` build script can use `CARGO_CFG_TARGET_POINTER_WIDTH`
to reliably detect 64-bit targets for libbacktrace.
Also update to backtrace-sys 0.1.24 for alexcrichton/backtrace-rs#122.
