Recent changes in path semantics meant that if none of the components in a
relative path existed as a part of a call to `create_dir_all` then the call
would fail as `create_dir("")` would be attempted and would fail with an OS
error.
at least that's what the docs say: http://doc.rust-lang.org/std/slice/fn.from_raw_parts.html
A few situations got prettier. In some situations the mutability of the resulting and source pointers differed (and was cast away by transmute), the mutability matches now.
This commit performs a stabilization pass over the std::net module,
incorporating the changes from RFC 923. Specifically, the following actions were
taken:
Stable functionality:
* `net` (the name)
* `Shutdown`
* `Shutdown::{Read, Write, Both}`
* `lookup_host`
* `LookupHost`
* `SocketAddr`
* `SocketAddr::{V4, V6}`
* `SocketAddr::port`
* `SocketAddrV4`
* `SocketAddrV4::{new, ip, port}`
* `SocketAddrV6`
* `SocketAddrV4::{new, ip, port, flowinfo, scope_id}`
* Common trait impls for socket addr structures
* `ToSocketAddrs`
* `ToSocketAddrs::Iter`
* `ToSocketAddrs::to_socket_addrs`
* `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}`
* `Ipv4Addr`
* `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}`
* `Ipv6Addr`
* `Ipv6Addr::{new, segments, to_ipv4}`
* `TcpStream`
* `TcpStream::connect`
* `TcpStream::{peer_addr, local_addr, shutdown, try_clone}`
* `{Read,Write} for {TcpStream, &TcpStream}`
* `TcpListener`
* `TcpListener::bind`
* `TcpListener::{local_addr, try_clone, accept, incoming}`
* `Incoming`
* `UdpSocket`
* `UdpSocket::bind`
* `UdpSocket::{recv_from, send_to, local_addr, try_clone}`
Unstable functionality:
* Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address
and determining qualities of it.
* Extra methods on `TcpStream` to configure various protocol options.
* Extra methods on `UdpSocket` to configure various protocol options.
Deprecated functionality:
* The `socket_addr` method has been renamed to `local_addr`
This commit is a breaking change due to the restructuring of the `SocketAddr`
type as well as the renaming of the `socket_addr` method. Migration should be
fairly straightforward, however, after accounting for the new level of
abstraction in `SocketAddr` (protocol distinction at the socket address level,
not the IP address).
[breaking-change]
This is a hack, but I don't think we can do much better as long as `derive` is running at the syntax expansion phase.
If the `custom_derive` feature gate is enabled, this works with user-defined traits and syntax extensions. Without the gate, you can't use e.g. `#[derive_Clone]` directly, so this does not change the stable language.
To make this effective, we now check gated attributes both before and after macro expansion. This uncovered a number of tests that were missing feature gates.
This PR also cleans up the deriving code somewhat, and forbids some previously-meaningless attribute syntax. For this reason it's technically a
[breaking-change]
r? @sfackler
This is a hack, but I don't think we can do much better as long as `derive` is
running at the syntax expansion phase.
If the custom_derive feature gate is enabled, this works with user-defined
traits and syntax extensions. Without the gate, you can't use e.g. #[derive_Clone]
directly, so this does not change the stable language.
This commit also cleans up the deriving code somewhat, and forbids some
previously-meaningless attribute syntax. For this reason it's technically a
[breaking-change]
This concretely improves type inference of some cases (see included
test). I assume the compiler struggles to reason about multiple layers
of generic type parameters (even with associated-type equalities) but
*can* understand pure associated types, since they are always directly
computable from the input types.
Thanks to @shepmaster for noticing the issue with `Cloned` (I took that example as a test case).
This commit is an implementation of [RFC 563][rfc] which adds a new
`cfg(debug_assertions)` directive which is specially recognized and calculated
by the compiler. The flag is turned off at any optimization level greater than 1
and may also be explicitly controlled through the `-C debug-assertions`
flag.
[rfc]: https://github.com/rust-lang/rfcs/pull/563
The `debug_assert!` and `debug_assert_eq!` macros now respect this instead of
the `ndebug` variable and `ndebug` no longer holds any meaning to the standard
library.
Code which was previously relying on `not(ndebug)` to gate expensive code should
be updated to rely on `debug_assertions` instead.
Closes#22492
[breaking-change]
This commit is an implementation of [RFC 563][rfc] which adds a new
`cfg(debug_assertions)` directive which is specially recognized and calculated
by the compiler. The flag is turned off at any optimization level greater than 1
and may also be explicitly controlled through the `-C debug-assertions`
flag.
[rfc]: https://github.com/rust-lang/rfcs/pull/563
The `debug_assert!` and `debug_assert_eq!` macros now respect this instead of
the `ndebug` variable and `ndebug` no longer holds any meaning to the standard
library.
Code which was previously relying on `not(ndebug)` to gate expensive code should
be updated to rely on `debug_assertions` instead.
Closes#22492
[breaking-change]
This concretely improves type inference of some cases (see included
test). I assume the compiler struggles to reason about multiple layers
of generic type parameters (even with associated-type equalities) but
*can* understand pure associated types, since they are always directly
computable from the input types.
Automatic has-same-types testing methodology can be found in #22501.
Because most of them don't work with `--pretty=typed`, compile-fail tests were manually audited.
r? @aturon
Many of the modifications putting in `Box::new` calls also include a
pointer to Issue 22405, which tracks going back to `box <expr>` if
possible in the future.
(Still tried to use `Box<_>` where it sufficed; thus some tests still
have `box_syntax` enabled, as they use a mix of `box` and `Box::new`.)
Precursor for overloaded-`box` and placement-`in`; see Issue 22181.
This is the kind of change that one is expected to need to make to
accommodate overloaded-`box`.
----
Note that this is not *all* of the changes necessary to accommodate
Issue 22181. It is merely the subset of those cases where there was
already a let-binding in place that made it easy to add the necesasry
type ascription.
(For unnamed intermediate `Box` values, one must go down a different
route; `Box::new` is the option that maximizes portability, but has
potential inefficiency depending on whether the call is inlined.)
----
There is one place worth note, `run-pass/coerce-match.rs`, where I
used an ugly form of `Box<_>` type ascription where I would have
preferred to use `Box::new` to accommodate overloaded-`box`. I
deliberately did not use `Box::new` here, because that is already done
in coerce-match-calls.rs.
----
Precursor for overloaded-`box` and placement-`in`; see Issue 22181.
Rebase and follow-through on work done by @cmr and @aatch.
Implements most of rust-lang/rfcs#560. Errors encountered from the checks during building were fixed.
The checks for division, remainder and bit-shifting have not been implemented yet.
See also PR #20795
cc @Aatch ; cc @nikomatsakis
Make `test/run-pass/backtrace.rs` more robust about own host environment
Namely, I have been annoyed in the past when I have done `RUST_BACKTRACE=1 make check` only to discover (again) that such a trick causes this test to fail, because it assumes that the `RUST_BACKTRACE` environment variable is not set.
Fix#22870
Associated types are now treated as part of the public API by the privacy checker.
If you were exposing a private type in your public API via an associated type, make that type public:
``` diff
pub struct PublicType { .. }
- struct Struct { .. }
+ pub struct Struct { .. }
pub trait PublicTrait {
type Output;
fn foo(&self) -> Self::Output;
}
impl PublicTrait for PublicType {
type Output = Struct;
fn foo(&self) -> Struct { // `Struct` is part of the public API, it must be marked as `pub`lic
..
}
}
```
[breaking-change]
---
r? @nikomatsakis
closes#22912
The API this exposes is a little strange (being attached to `static`s),
so it makes sense to conservatively feature gate it. If it is highly
popular, it is possible to reverse this gating.
Namely, I have been annoyed in the past when I have done
`RUST_BACKTRACE=1 make check` only to discover (again) that such a
trick causes this test to fail, because it assumes that the
`RUST_BACKTRACE` environment variable is not set.
The API this exposes is a little strange (being attached to `static`s),
so it makes sense to conservatively feature gate it. If it is highly
popular, it is possible to reverse this gating.
* count_ones/zeros, trailing_ones/zeros return u32, not usize
* rotate_left/right take u32, not usize
* RADIX, MANTISSA_DIGITS, DIGITS, BITS, BYTES are u32, not usize
Doesn't touch pow because there's another PR for it.
[breaking-change]
Namely, I have been annoyed in the past when I have done
`RUST_BACKTRACE=1 make check` only to discover (again) that such a
trick causes this test to fail, because it assumes that the
`RUST_BACKTRACE` environment variable is not set.
Fix#22870
This is an implementation of RFC 899 and adds stdio functionality to the new
`std::io` module. Details of the API can be found on the RFC, but from a high
level:
* `io::{stdin, stdout, stderr}` constructors are now available. There are also
`*_raw` variants for unbuffered and unlocked access.
* All handles are globally shared (excluding raw variants).
* The stderr handle is no longer buffered.
* All handles can be explicitly locked (excluding the raw variants).
The `print!` and `println!` machinery has not yet been hooked up to these
streams just yet. The `std::fmt::output` module has also not yet been
implemented as part of this commit.
Check for unbounded recursion during dropck.
Such recursion can be introduced by the erroneous use of non-regular types (aka types employing polymorphic recursion), which Rust does not support.
Fix#22443
This is an implementation of RFC 899 and adds stdio functionality to the new
`std::io` module. Details of the API can be found on the RFC, but from a high
level:
* `io::{stdin, stdout, stderr}` constructors are now available. There are also
`*_raw` variants for unbuffered and unlocked access.
* All handles are globally shared (excluding raw variants).
* The stderr handle is no longer buffered.
* All handles can be explicitly locked (excluding the raw variants).
The `print!` and `println!` machinery has not yet been hooked up to these
streams just yet. The `std::fmt::output` module has also not yet been
implemented as part of this commit.
Fixing #21475. Right now this code can not be parsed:
```rust
use m::{START, END};
fn main() {
match 42u32 {
m::START...m::END => {}, // error: expected one of `::`, `=>`, or `|`, found `...`
_ => {},
}
}
mod m {
pub const START: u32 = 4;
pub const END: u32 = 14;
}
```
I fixed the parser and added test for this case, but now there are still problems with mixing literals and paths in interval:
```rust
match 42u32 {
0u32...m::END => {}, // mismatched types in range [E0031]
m::START...59u32 => {}, // mismatched types in range [E0031]
_ => {},
}
}
```
I'll try fix this problem and need review.
Fixes#20978 for supported platforms (i.e. non-Android POSIX).
This uses `backtrace_pcinfo` to inspect the DWARF debug info and list the file and line pairs for given stack frame. Such pair is not unique due to the presence of inlined functions and the updated routine correctly handles this case. The code is modelled after libbacktrace's `backtrace_full` routine.
There is one known issue with this approach. Macros, when invoked, take over the current frame and shadows the file and line pair which has invoked a macro. In particular, this makes many panicking
macros a bit harder to inspect. This really is a debuginfo problem, and the backtrace routine should print them correctly with a correct debuginfo.
Some example trace:
```
thread '<main>' panicked at 'explicit panic', /home/arachneng/Works/git/rust/src/test/run-pass/backtrace-debuginfo.rs:74
stack backtrace:
1: 0xd964702f - sys::backtrace::write::h32d93fffb64131b2yxC
2: 0xd9670202 - panicking::on_panic::h3a4fcb37b873aefeooM
3: 0xd95b396a - rt::unwind::begin_unwind_inner::h576b3df5f626902dJ2L
4: 0xd9eb88df - rt::unwind::begin_unwind::h16852273847167740350
5: 0xd9eb8afb - aux::callback::h15056955655605709172
at /home/arachneng/Works/git/rust/<std macros>:3
at src/test/run-pass/backtrace-debuginfo-aux.rs:15
6: 0xd9eb8caa - outer::h2cf96412459fceb6ema
at src/test/run-pass/backtrace-debuginfo.rs:73
at src/test/run-pass/backtrace-debuginfo.rs:88
7: 0xd9ebab24 - main::h3f701287441442edasa
at src/test/run-pass/backtrace-debuginfo.rs:134
8: 0xd96daba8 - rust_try_inner
9: 0xd96dab95 - rust_try
10: 0xd9671af4 - rt::lang_start::h7da0de9529b4c394liM
11: 0xd8f3aec4 - __libc_start_main
12: 0xd9eb8148 - <unknown>
13: 0xffffffff - <unknown>
```
- Fixed a couple of dead code warnings in std::sys::backtrace.
- Made `backtrace-debuginfo` test a no-op on non-Linux platforms.
- `backtrace-debuginfo` is no longer tested on pretty-rpass.
Change MarkerTrait to be invariant. This is a (small) loss of expressiveness, but is necessary for now to work around #22806. Fixes#22655.
r? @pnkfelix
Ensure we do not zero when \"moving\" types that are Copy.
Uses more precise `type_needs_drop` for deciding about emitting cleanup code. Added notes about the weaknesses regarding `ty::type_contents` here.
Fix#22536
Fixes#20978 for supported platforms (i.e. non-Android POSIX).
This uses `backtrace_pcinfo` to inspect the DWARF debug info
and list the file and line pairs for given stack frame.
Such pair is not unique due to the presence of inlined functions
and the updated routine correctly handles this case.
The code is modelled after libbacktrace's `backtrace_full` routine.
There is one known issue with this approach. Macros, when invoked,
take over the current frame and shadows the file and line pair
which has invoked a macro. In particular, this makes many panicking
macros a bit harder to inspect. This really is a debuginfo problem,
and the backtrace routine should print them correctly with
a correct debuginfo.
This commit moves `std::env` away from the `std::old_io` error type as well as
the `std::old_path` module. Methods returning an error now return `io::Error`
and methods consuming or returning paths use `std::path` instead of
`std::old_path`. This commit does not yet mark these APIs as `#[stable]`.
This commit also migrates `std::old_io::TempDir` to `std::fs::TempDir` with
essentially the exact same API. This type was added to interoperate with the new
path API and has its own `tempdir` feature.
Finally, this commit reverts the deprecation of `std::os` APIs returning the old
path API types. This deprecation can come back once the entire `std::old_path`
module is deprecated.
[breaking-change]
This commit removes many unnecessary `unsafe impl` blocks as well as pushing the
needed implementations to the lowest level possible. I noticed that the bounds
for `RwLock` are a little off when reviewing #22574 and wanted to ensure that we
had our story straight on these implementations.
This is a fix for #20300 though as a side-sweep it fixes a number of stack overflows because it integrates cycle detection into the conversion process. I didn't go through and retest everything.
The tricky part here is that in some cases we have to go find the information we need from the AST -- we can't use the converted form of the where-clauses because we often have to handle something like `T::Item` *while converting the where-clauses themselves*. Since this is also not a fixed-point process we can't just try and keep trying to find the best order. So instead I modified the `AstConv` interface to allow you to request the bounds for a type parameter; we'll then do a secondary scan of the where-clauses to figure out what we need. This may create a cycle in some cases, but we have code to catch that.
Another approach that is NOT taken by this PR would be to "convert" `T::Item` into a form that does not specify what trait it's using. This then kind of defers the problem of picking the trait till later. That might be a good idea, but it would make normalization and everything else much harder, so I'm holding off on that (and hoping to find a better way for handling things like `i32::T`).
This PR also removes "most of" the `bounds` struct from `TypeParameterDef`. Still a little ways to go before `ParamBounds` can be removed entirely -- it's used for supertraits, for example (though those really ought to be converted, I think, to a call to `get_type_parameter_bounds` on `Self` from within the trait definition).
cc @jroesch
Fixes#20300
This commit moves `std::env` away from the `std::old_io` error type as well as
the `std::old_path` module. Methods returning an error now return `io::Error`
and methods consuming or returning paths use `std::path` instead of
`std::old_path`. This commit does not yet mark these APIs as `#[stable]`.
This commit also migrates `std::old_io::TempDir` to `std::fs::TempDir` with
essentially the exact same API. This type was added to interoperate with the new
path API and has its own `tempdir` feature.
Finally, this commit reverts the deprecation of `std::os` APIs returning the old
path API types. This deprecation can come back once the entire `std::old_path`
module is deprecated.
[breaking-change]
Fixes#22525
I wasn't sure if I should reuse `write::get_llvm_opt_level` or not. It returns an `llvm::CodeGenOptLevel`, which is the Rust binding for `CodeGenOpt::Level`. `lto.rs` is passing an optlevel to LLVM's `PassManagerBuilder`, which takes an unsigned int. `PassManagerBuilder`'s optlevel uses essentially the same enumeration (i.e. 0-3 with 2 as default), but it's implicit.
The windows/unix modules were currently inconsistent about the traits being
implemented for `DirEntry` and there isn't much particular reason why the traits
*couldn't* be implemented for `ReadDir` and `DirEntry`, so this commit ensures
that they are implemented.
Closes#22577
aatch's cfg revisions, namely to match expressions
Revise handling of match expressions so that arms branch to next arm.
Update the graphviz tests accordingly.
Fixes#22073. (Includes regression test for the issue.)
RFC 817 is not yet accepted, but I wanted to put this code up so people can see how it works. And to be ready lest it should be accepted.
cc rust-lang/rfcs#817
This commit removes many unnecessary `unsafe impl` blocks as well as pushing the
needed implementations to the lowest level possible. I noticed that the bounds
for `RwLock` are a little off when reviewing #22574 and wanted to ensure that we
had our story straight on these implementations.
The windows/unix modules were currently inconsistent about the traits being
implemented for `DirEntry` and there isn't much particular reason why the traits
*couldn't* be implemented for `ReadDir` and `DirEntry`, so this commit ensures
that they are implemented.
Closes#22577
This commit stabilizes `std::borrow`, making the following modifications
to catch up the API with language changes:
* It renames `BorrowFrom` to `Borrow`, as was originally intended (but
blocked for technical reasons), and reorders the parameters
accordingly.
* It moves the type parameter of `ToOwned` to an associated type. This
is somewhat less flexible, in that each borrowed type must have a
unique owned type, but leads to a significant simplification for
`Cow`. Flexibility can be regained by using newtyped slices, which is
advisable for other reasons anyway.
* It removes the owned type parameter from `Cow`, making the type much
less verbose.
* Deprecates the `is_owned` and `is_borrowed` predicates in favor of
direct matching.
The above API changes are relatively minor; the basic functionality
remains the same, and essentially the whole module is now marked
`#[stable]`.
[breaking-change]
This commit is an implementation of [RFC 592][r592] and [RFC 840][r840]. These
two RFCs tweak the behavior of `CString` and add a new `CStr` unsized slice type
to the module.
[r592]: https://github.com/rust-lang/rfcs/blob/master/text/0592-c-str-deref.md
[r840]: https://github.com/rust-lang/rfcs/blob/master/text/0840-no-panic-in-c-string.md
The new `CStr` type is only constructable via two methods:
1. By `deref`'ing from a `CString`
2. Unsafely via `CStr::from_ptr`
The purpose of `CStr` is to be an unsized type which is a thin pointer to a
`libc::c_char` (currently it is a fat pointer slice due to implementation
limitations). Strings from C can be safely represented with a `CStr` and an
appropriate lifetime as well. Consumers of `&CString` should now consume `&CStr`
instead to allow producers to pass in C-originating strings instead of just
Rust-allocated strings.
A new constructor was added to `CString`, `new`, which takes `T: IntoBytes`
instead of separate `from_slice` and `from_vec` methods (both have been
deprecated in favor of `new`). The `new` method returns a `Result` instead of
panicking. The error variant contains the relevant information about where the
error happened and bytes (if present). Conversions are provided to the
`io::Error` and `old_io::IoError` types via the `FromError` trait which
translate to `InvalidInput`.
This is a breaking change due to the modification of existing `#[unstable]` APIs
and new deprecation, and more detailed information can be found in the two RFCs.
Notable breakage includes:
* All construction of `CString` now needs to use `new` and handle the outgoing
`Result`.
* Usage of `CString` as a byte slice now explicitly needs a `.as_bytes()` call.
* The `as_slice*` methods have been removed in favor of just having the
`as_bytes*` methods.
Closes#22469Closes#22470
[breaking-change]
This commit is an implementation of [RFC 823][rfc] which is another pass over
the `std::hash` module for stabilization. The contents of the module were not
entirely marked stable, but some portions which remained quite similar to the
previous incarnation are now marked `#[stable]`. Specifically:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0823-hash-simplification.md
* `std::hash` is now stable (the name)
* `Hash` is now stable
* `Hash::hash` is now stable
* `Hasher` is now stable
* `SipHasher` is now stable
* `SipHasher::new` and `new_with_keys` are now stable
* `Hasher for SipHasher` is now stable
* Many `Hash` implementations are now stable
All other portions of the `hash` module remain `#[unstable]` as they are less
commonly used and were recently redesigned.
This commit is a breaking change due to the modifications to the `std::hash` API
and more details can be found on the [RFC][rfc].
Closes#22467
[breaking-change]
This commit is an implementation of [RFC 592][r592] and [RFC 840][r840]. These
two RFCs tweak the behavior of `CString` and add a new `CStr` unsized slice type
to the module.
[r592]: https://github.com/rust-lang/rfcs/blob/master/text/0592-c-str-deref.md
[r840]: https://github.com/rust-lang/rfcs/blob/master/text/0840-no-panic-in-c-string.md
The new `CStr` type is only constructable via two methods:
1. By `deref`'ing from a `CString`
2. Unsafely via `CStr::from_ptr`
The purpose of `CStr` is to be an unsized type which is a thin pointer to a
`libc::c_char` (currently it is a fat pointer slice due to implementation
limitations). Strings from C can be safely represented with a `CStr` and an
appropriate lifetime as well. Consumers of `&CString` should now consume `&CStr`
instead to allow producers to pass in C-originating strings instead of just
Rust-allocated strings.
A new constructor was added to `CString`, `new`, which takes `T: IntoBytes`
instead of separate `from_slice` and `from_vec` methods (both have been
deprecated in favor of `new`). The `new` method returns a `Result` instead of
panicking. The error variant contains the relevant information about where the
error happened and bytes (if present). Conversions are provided to the
`io::Error` and `old_io::IoError` types via the `FromError` trait which
translate to `InvalidInput`.
This is a breaking change due to the modification of existing `#[unstable]` APIs
and new deprecation, and more detailed information can be found in the two RFCs.
Notable breakage includes:
* All construction of `CString` now needs to use `new` and handle the outgoing
`Result`.
* Usage of `CString` as a byte slice now explicitly needs a `.as_bytes()` call.
* The `as_slice*` methods have been removed in favor of just having the
`as_bytes*` methods.
Closes#22469Closes#22470
[breaking-change]
This commit is an implementation of [RFC 823][rfc] which is another pass over
the `std::hash` module for stabilization. The contents of the module were not
entirely marked stable, but some portions which remained quite similar to the
previous incarnation are now marked `#[stable]`. Specifically:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0823-hash-simplification.md
* `std::hash` is now stable (the name)
* `Hash` is now stable
* `Hash::hash` is now stable
* `Hasher` is now stable
* `SipHasher` is now stable
* `SipHasher::new` and `new_with_keys` are now stable
* `Hasher for SipHasher` is now stable
* Many `Hash` implementations are now stable
All other portions of the `hash` module remain `#[unstable]` as they are less
commonly used and were recently redesigned.
This commit is a breaking change due to the modifications to the `std::hash` API
and more details can be found on the [RFC][rfc].
Closes#22467
[breaking-change]
into variance inference; fix various bugs in variance inference
so that it considers the correct set of constraints; modify infer to
consider the results of variance inference for type arguments.
- Now "make check-stage2-T-aarch64-linux-android-H-x86_64-unknown-linux-gnu" works (#21773)
- Fix & enable debuginfo tests for android (#10381)
- Fix & enable more tests for android (both for arm/aarch64)
- Enable many already-pass tests on android (both for arm/aarch64)
This commit mostly replaces some of the uses of os::args with env::args.
This, for obvious reasons is based on top of #22400. Do not r+ before that lands.
When matching against strings/slices, we call the comparison function
for strings, which takes two string slices by value. The slices are
passed in memory, and currently we just pass in a pointer to the
original slice. That can cause misoptimizations because we emit a call
to llvm.lifetime.end for all by-value arguments at the end of a
function, which in this case marks the original slice as dead.
So we need to properly create copies of the slices to pass them to the
comparison function.
Fixes#22008
When matching against strings/slices, we call the comparison function
for strings, which takes two string slices by value. The slices are
passed in memory, and currently we just pass in a pointer to the
original slice. That can cause misoptimizations because we emit a call
to llvm.lifetime.end for all by-value arguments at the end of a
function, which in this case marks the original slice as dead.
So we need to properly create copies of the slices to pass them to the
comparison function.
Fixes#22008
It's not clear what this means, because a macro in item position can expand to zero or more items. For now we disallow it, which is technically a
[breaking-change]
but is landing without an RFC. The `pub` keyword previously had no effect, which seems quite unintended.
Fixes#18317.
Fixes#14660.
This PR replaces uses of `os::getenv` with newly introduced `env::var{,_os}`.
Mostly did this as a background activity to procrastinate from procrastinating.
Tests appear to build and run fine. This includes benchmarks from test/bench directory.
Some function signatures have changed, so this is a [breaking-change].
In particular, radixes and numerical values of digits are represented by `u32` now.
Part of #22240
It's not clear what this means, because a macro in item position can expand to
zero or more items. For now we disallow it, which is technically a
[breaking-change]
but is landing without an RFC. The `pub` keyword previously had no effect,
which seems quite unintended.
Fixes#18317.
Fixes#14660.
