Checks for the suspicious use of OpenOptions::create()
without an explicit OpenOptions::truncate().
create() alone will either create a new file or open an
existing file. If the file already exists, it will be
overwritten when written to, but the file will not be
truncated by default. If less data is written to the file
than it already contains, the remainder of the file will
remain unchanged, and the end of the file will contain old
data.
In most cases, one should either use `create_new` to ensure
the file is created from scratch, or ensure `truncate` is
called so that the truncation behaviour is explicit.
`truncate(true)` will ensure the file is entirely overwritten
with new data, whereas `truncate(false)` will explicitely
keep the default behavior.
```rust
use std::fs::OpenOptions;
OpenOptions::new().create(true).truncate(true);
```
[`useless_asref`]: check that the clone receiver is the parameter
Fixes#12135
There was no check for the receiver of the `clone` call in the map closure. This makes sure that it's a path to the parameter.
changelog: [`useless_asref`]: check that the clone receiver is the closure parameter
['arc_with_non_send_sync`] documentation edits
Arc's documentation uses the term "thread"; aligning to that terminology. Fix casing of "Rc".
changelog: None
Make `HirEqInterExpr::eq_block` take comments into account while checking if two blocks are equal
This PR:
- now makes `HirEqInterExpr::eq_block` take comments into account. Identical code with varying comments will no longer be considered equal.
- makes necessary adjustments to UI tests.
Closes#12044
**Lintcheck Changes**
- `match_same_arms` 53 => 52
- `if_same_then_else` 3 => 0
changelog: [`if_same_then_else`]: Blocks with different comments will no longer trigger this lint.
changelog: [`match_same_arms`]: Arms with different comments will no longer trigger this lint.
```
Improve help message for `search_is_some` lint
Fixes#11681.
Like mentioned in the issue, we tend to use the formulation "consider using", which we didn't in this case. I think it clears both the confusion and also makes help message more coherent overall.
r? `@llogiq`
changelog: Improve help message for `search_is_some` lint
Fix false positive in `PartialEq` check in `unconditional_recursion` lint
Fixes https://github.com/rust-lang/rust-clippy/issues/12133.
We needed to check for the type of the previous element <del>in case it's a field</del>.
EDIT: After some extra thoughts, no need to check if it's a field, just if it's the same type as `Self`.
r? `@llogiq`
changelog: Fix false positive in `PartialEq` check in `unconditional_recursion` lint
Fix suggestion for `map_clone` lint on types implementing `Copy`
Follow-up of https://github.com/rust-lang/rust-clippy/pull/12104.
It was missing this check to suggest the correct method.
r? `@llogiq`
changelog: Fix suggestion for `map_clone` lint on types implementing `Copy`
I'm not on vacation (again)
A few weeks ago I opened #12011 removing me from `users_on_vacation`, it got merged. The subtree sync reverted this change (weirdly)
changelog: none
r? `@xFrednet`
Remove giraffate from the reviewer rotation
I've been less active in Clippy recently because I'm so busy that I don't have time for maintaining Clippy in my spare time. So, I remove myself from the reviewer rotation once. I hope to come back again.
I'll reassign the PRs later.
changelog: none
Extend `useless_asref` lint on `map(clone)`
If you have code like:
```rust
Some(String::new()).as_ref().map(Clone::clone)
```
the `as_ref` call is unneeded.
Interestingly enough, this lint and `map_clone` are starting to share a same "space" where both lints warn about different things for the same code. Not sure what's the policy about such cases though...
r? `@llogiq`
changelog: Extend `useless_asref` lint on `map(clone)`
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
fix/issue#11243: allow 3-digit-grouped binary in non_octal_unix_permissions
fixes [Issue#11243](https://github.com/rust-lang/rust-clippy/issues/11243)
Issue#11243 suggest lint `non_octal_unix_permissions` should not report binary format literal unix permissions as an error, and we think binary format is a good way to understand these permissions.
To solve this problem, we need to add check for binary literal, which is written in function `check_binary_unix_permissions` , only `binary, 3 groups and each group length equals to 3` is a legal format.
changelog: [`non_octal_unix_permissions`]: Add check for binary format literal unix permissions like 0b111_111_111
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
Fixed ICE introduced in #12004
Issue: in https://github.com/rust-lang/rust-clippy/pull/12004, we emit a lint for `filter(Option::is_some)`. If the
parent expression is a `.map` we don't emit that lint as there exists a
more specialized lint for that.
The ICE introduced in https://github.com/rust-lang/rust-clippy/pull/12004 is a consequence of the assumption that a
parent expression after a filter would be a method call with the filter
call being the receiver. However, it is entirely possible to have a
closure of the form
```
|| { vec![Some(1), None].into_iter().filter(Option::is_some) }
```
The previous implementation looked at the parent expression; namely the
closure, and tried to check the parameters by indexing [0] on an empty
list.
This commit is an overhaul of the lint with significantly more FP tests
and checks.
Impl details:
1. We verify that the filter method we are in is a proper trait method
to avoid FPs.
2. We check that the parent expression is not a map by checking whether
it exists; if is a trait method; and then a method call.
3. We check that we don't have comments in the span.
4. We verify that we are in an Iterator of Option and Result.
5. We check the contents of the filter.
1. For closures we peel it. If it is not a single expression, we don't
lint. We then try again by checking the peeled expression.
2. For paths, we do a typecheck to avoid FPs for types that impl
functions with the same names.
3. For calls, we verify the type, via the path, and that the param of
the closure is the single argument to the call.
4. For method calls we verify that the receiver is the parameter of
the closure. Since we handle single, non-block exprs, the
parameter can't be shadowed, so no FP.
This commit also adds additional FP tests.
Fixes: #12058
Adding `@xFrednet` as you've the most context for this as you reviewed it last time.
`@rustbot` r? `@xFrednet`
---
changelog: none
(Will be backported and therefore don't effect stable)
Issue: in #12004, we emit a lint for `filter(Option::is_some)`. If the
parent expression is a `.map` we don't emit that lint as there exists a
more specialized lint for that.
The ICE introduced in #12004 is a consequence of the assumption that a
parent expression after a filter would be a method call with the filter
call being the receiver. However, it is entirely possible to have a
closure of the form
```
|| { vec![Some(1), None].into_iter().filter(Option::is_some) }
```
The previous implementation looked at the parent expression; namely the
closure, and tried to check the parameters by indexing [0] on an empty
list.
This commit is an overhaul of the lint with significantly more FP tests
and checks.
Impl details:
1. We verify that the filter method we are in is a proper trait method
to avoid FPs.
2. We check that the parent expression is not a map by checking whether
it exists; if is a trait method; and then a method call.
3. We check that we don't have comments in the span.
4. We verify that we are in an Iterator of Option and Result.
5. We check the contents of the filter.
1. For closures we peel it. If it is not a single expression, we don't
lint.
2. For paths, we do a typecheck to avoid FPs for types that impl
functions with the same names.
3. For calls, we verify the type, via the path, and that the param of
the closure is the single argument to the call.
4. For method calls we verify that the receiver is the parameter of
the closure. Since we handle single, non-block exprs, the
parameter can't be shadowed, so no FP.
This commit also adds additional FP tests.
Handle "calls" inside the closure as well in `map_clone` lint
Follow-up of https://github.com/rust-lang/rust-clippy/pull/12104.
I just realized that I didn't handle the case where the `clone` method was made as a call and not a method call.
r? `@llogiq`
changelog: Handle "calls" inside the closure as well in `map_clone` lint
Do not suggest `bool::then()` and `bool::then_some` in `const` contexts
Fix#12103
changelog: [`if_then_some_else_none`]: Do not trigger in `const` contexts
improve [`cast_sign_loss`], to skip warning on always positive expressions
fixes: #11642
changelog: improve [`cast_sign_loss`] to skip warning on always positive expressions
Turns out this is change became quite big, and I still can't cover all the cases, like method calls such as `POSITIVE_NUM.mul(POSITIVE_NUM)`, or `NEGATIVE_NUM.div(NEGATIVE_NUM)`... but well, if I do, I'm scared that this will goes forever, so I stopped, unless it needs to be done, lol.
Do not suggest `[T; n]` instead of `vec![T; n]` if `T` is not `Copy`
changelog: [`useless_vec`]: do not suggest replacing `&vec![T; N]` by `&[T; N]` if `T` is not `Copy`
Fix#11958
