When there is only a single store to the ret slot that dominates the
load that gets the value for the "ret" instruction, we can elide the
ret slot and directly return the operand of the dominating store
instruction. This is the same thing that clang does, except for a
special case that doesn't seem to affect us.
Fixes#8238
When there is only a single store to the ret slot that dominates the
load that gets the value for the "ret" instruction, we can elide the
ret slot and directly return the operand of the dominating store
instruction. This is the same thing that clang does, except for a
special case that doesn't seem to affect us.
Fixes#8238
r? @graydon Also, notably, make rustpkgtest depend on the rustpkg executable (otherwise, tests that shell out to rustpgk might run when rustpkg doesn't exist).
This commit allows you to write:
extern mod x = "a/b/c";
which means rustc will search in the RUST_PATH for a package with
ID a/b/c, and bind it to the name `x` if it's found.
Incidentally, move get_relative_to from back::rpath into std::path
This can be applied to statics and it will indicate that LLVM will attempt to
merge the constant in .data with other statics.
I have preliminarily applied this to all of the statics generated by the new
`ifmt!` syntax extension. I compiled a file with 1000 calls to `ifmt!` and a
separate file with 1000 calls to `fmt!` to compare the sizes, and the results
were:
fmt 310k
ifmt (before) 529k
ifmt (after) 202k
This now means that ifmt! is both faster and smaller than fmt!, yay!
env! aborts compilation of the specified environment variable is not
defined and takes an optional second argument containing a custom
error message. option_env! creates an Option<&'static str> containing
the value of the environment variable.
There are no run-pass tests that check the behavior when the environment
variable is defined since the test framework doesn't support setting
environment variables at compile time as opposed to runtime. However,
both env! and option_env! are used inside of rustc itself, which should
act as a sufficient test.
Fixes#2248.
Code that collects fields in struct-like patterns used to ignore
wildcard patterns like `Foo{_}`. But `enter_defaults` considered
struct-like patterns as default in order to overcome this
(accoring to my understanding of situation).
However such behaviour caused code like this:
```
enum E {
Foo{f: int},
Bar
}
let e = Bar;
match e {
Foo{f: _f} => { /* do something (1) */ }
_ => { /* do something (2) */ }
}
```
consider pattern `Foo{f: _f}` as default. That caused inproper behaviour
and even segfaults while trying to destruct `Bar` as `Foo{f: _f}`.
Issues: #5625 , #5530.
This patch fixes `collect_record_or_struct_fields` to split cases of
single wildcard struct-like pattern and no struct-like pattern at all.
Former case resolved with `enter_rec_or_struct` (and not with
`enter_defaults`).
Closes#5625.
Closes#5530.
env! aborts compilation of the specified environment variable is not
defined and takes an optional second argument containing a custom
error message. option_env! creates an Option<&'static str> containing
the value of the environment variable.
There are no run-pass tests that check the behavior when the environment
variable is defined since the test framework doesn't support setting
environment variables at compile time as opposed to runtime. However,
both env! and option_env! are used inside of rustc itself, which should
act as a sufficient test.
Close#2248
According to #7887, we've decided to use the syntax of `fn map<U>(f: &fn(&T) -> U) -> U`, which passes a reference to the closure, and to `fn map_move<U>(f: &fn(T) -> U) -> U` which moves the value into the closure. This PR adds these `.map_move()` functions to `Option` and `Result`.
In addition, it has these other minor features:
* Replaces a couple uses of `option.get()`, `result.get()`, and `result.get_err()` with `option.unwrap()`, `result.unwrap()`, and `result.unwrap_err()`. (See #8268 and #8288 for a more thorough adaptation of this functionality.
* Removes `option.take_map()` and `option.take_map_default()`. These two functions can be easily written as `.take().map_move(...)`.
* Adds a better error message to `result.unwrap()` and `result.unwrap_err()`.
Code like this is fixed now:
```
fn foo(p: [u8, ..4]) {
match p {
[a, b, c, d] => {}
};
}
```
Invalid constructors are not reported as errors yet:
```
fn foo(p: [u8, ..4]) {
match p {
[_, _, _] => {} // this should be error
[_, _, _, _, _, .._] => {} // and this
_ => {}
}
}
```
Issue #8311 is partially fixed by this commit. Fixed-length arrays in
let statement are not yet allowed:
```
let [a, b, c] = [1, 2, 3]; // still fails
```
Code that collects fields in struct-like patterns used to ignore
wildcard patterns like `Foo{_}`. But `enter_defaults` considered
struct-like patterns as default in order to overcome this
(accoring to my understanding of situation).
However such behaviour caused code like this:
```
enum E {
Foo{f: int},
Bar
}
let e = Bar;
match e {
Foo{f: _f} => { /* do something (1) */ }
_ => { /* do something (2) */ }
}
```
consider pattern `Foo{f: _f}` as default. That caused inproper behaviour
and even segfaults while trying to destruct `Bar` as `Foo{f: _f}`.
Issues: #5625 , #5530.
This patch fixes `collect_record_or_struct_fields` to split cases of
single wildcard struct-like pattern and no struct-like pattern at all.
Former case resolved with `enter_rec_or_struct` (and not with
`enter_defaults`).
Closes#5625.
Closes#5530.
- Made naming schemes consistent between Option, Result and Either
- Changed Options Add implementation to work like the maybe monad (return None if any of the inputs is None)
- Removed duplicate Option::get and renamed all related functions to use the term `unwrap` instead
When strings lose their trailing null, this pattern will become dangerous:
let foo = "bar";
let foo_ptr: *u8 = &foo[0];
Instead we should use c_strs to handle this correctly.
* LLVM now has a C interface to LLVMBuildAtomicRMW
* The exception handling support for the JIT seems to have been dropped
* Various interfaces have been added or headers have changed
rvalues aren't going to be used anywhere but as the argument, so
there's no point in copying them. LLVM used to eliminate the copy
later, but why bother emitting it in the first place?
rvalues aren't going to be used anywhere but as the argument, so
there's no point in copying them. LLVM used to eliminate the copy
later, but why bother emitting it in the first place?
This is preparation for removing `@fn`.
This does *not* use default methods yet, because I don't know
whether they work. If they do, a forthcoming PR will use them.
This also changes the precedence of `as`.
* All globals marked as `pub` won't have the `internal` linkage type set
* All global references across crates are forced to use the address of the
global in the other crate via an external reference.
r? @graydon
Closes#8179
Change the former repetition::
for 5.times { }
to::
do 5.times { }
.times() cannot be broken with `break` or `return` anymore; for those
cases, use a numerical range loop instead.
* All globals marked as `pub` won't have the `internal` linkage type set
* All global references across crates are forced to use the address of the
global in the other crate via an external reference.
The purpose here is to get rid of compile_upto, which pretty much always requires the user to read the source to figure out what it does. It's replaced by a sequence of obviously-named functions:
- phase_1_parse_input(sess, cfg, input);
- phase_2_configure_and_expand(sess, cfg, crate);
- phase_3_run_analysis_passes(sess, expanded_crate);
- phase_4_translate_to_llvm(sess, expanded_crate, &analysis, outputs);
- phase_5_run_llvm_passes(sess, &trans, outputs);
- phase_6_link_output(sess, &trans, outputs);
Each of which takes what it takes and returns what it returns, with as little variation as possible in behaviour: no "pairs of options" and "pairs of control flags". You can tell if you missed a phase because you will be missing a `phase_N` call to some `N` between 1 and 6.
It does mean that people invoking librustc from outside need to write more function calls. The benefit is that they can _figure out what they're doing_ much more easily, and stop at any point, rather than further overloading the tangled logic of `compile_upto`.
As the title says, valid debug info is now generated for any kind of pattern-based bindings like an example from the automated tests:
```rust
let ((u, v), ((w, (x, Struct { a: y, b: z})), Struct { a: ae, b: oe }), ue) =
((25, 26), ((27, (28, Struct { a: 29, b: 30})), Struct { a: 31, b: 32 }), 33);
```
(Not that you would necessarily want to do a thing like that :P )
Fixes#2533
Previously having optional lang_items caused an assertion failure at
compile-time, and then once that was fixed there was a segfault at runtime of
using a NULL crate-map (crates with no_std)
Hi,
As noted in #6804, a pattern that contains `NaN` will never match because `NaN != NaN`. This adds a warning for such a case. The first commit handles the basic case and the second one generalizes it to more complex patterns using `walk_pat`.
Until now, we only optimized away impossible branches when there is a
literal true/false in the code. But since the LLVM IR builder already does
constant folding for us, we can trivially expand that to work with
constants as well.
Refs #7834
Infers type of constants used as discriminants and ensures they are
integral, instead of forcing them to be a signed integer.
Also, stores discriminant values as uint instead of int interally and
deals with related fallout.
Fixes issue #7994
This is a cleanup pull request that does:
* removes `os::as_c_charp`
* moves `str::as_buf` and `str::as_c_str` into `StrSlice`
* converts some functions from `StrSlice::as_buf` to `StrSlice::as_c_str`
* renames `StrSlice::as_buf` to `StrSlice::as_imm_buf` (and adds `StrSlice::as_mut_buf` to match `vec.rs`.
* renames `UniqueStr::as_bytes_with_null_consume` to `UniqueStr::to_bytes`
* and other misc cleanups and minor optimizations
The code to build the transmute intrinsic currently makes the invalid
assumption that if the in-type is non-immediate, the out-type is
non-immediate as well. But this is wrong, for example when transmuting
[int, ..1] to int. So we need to handle this fourth case as well.
Fixes#7988
This allows for control over the section placement of static, static
mut, and fn items. One caveat is that if a static and a static mut are
placed in the same section, the static is declared first, and the static
mut is assigned to, the generated program crashes. For example:
#[link_section=".boot"]
static foo : uint = 0xdeadbeef;
#[link_section=".boot"]
static mut bar : uint = 0xcafebabe;
Declaring bar first would mark .bootdata as writable, preventing the
crash when bar is written to.
Improve vtable resolution in a handful of ways. First, if we don't
find a vtable for a self/param type, do a regular vtable search. This
could find impls of the form "impl for A". Second, we don't require
that types be fully resolved before looking up subtables, and we
process tables in reverse order. This allows us to gain more
information about early type parameters based on how they are used by
the impls used to resolve later params.
Closes#6967, I believe.
This allows for control over the section placement of static, static
mut, and fn items. One caveat is that if a static and a static mut are
placed in the same section, the static is declared first, and the static
mut is assigned to, the generated program crashes. For example:
#[link_section=".boot"]
static foo : uint = 0xdeadbeef;
#[link_section=".boot"]
static mut bar : uint = 0xcafebabe;
Declaring bar first would mark .bootdata as writable, preventing the
crash when bar is written to.
Continuation of https://github.com/mozilla/rust/pull/7826.
AST spanned<T> refactoring, AST type renamings:
`crate => Crate`
`local => Local`
`blk => Block`
`crate_num => CrateNum`
`crate_cfg => CrateConfig`
`field => Field`
Also, Crate, Field and Local are not wrapped in spanned<T> anymore.
`crate => Crate`
`local => Local`
`blk => Block`
`crate_num => CrateNum`
`crate_cfg => CrateConfig`
Also, Crate and Local are not wrapped in spanned<T> anymore.
These changes remove unnecessary basic blocks and the associated branches from
the LLVM IR that we emit. Together, they reduce the time for unoptimized builds
in stage2 by about 10% on my box.
These blocks were required because previously we could only insert
instructions at the end of blocks, but we wanted to have all allocas in
one place, so they can be collapse. But now we have "direct" access the
the LLVM IR builder and can position it freely. This allows us to use
the same trick that clang uses, which means that we insert a dummy
"marker" instruction to identify the spot at which we want to insert
allocas. We can then later position the IR builder at that spot and
insert the alloca instruction, without any dedicated block.
The block for loading the closure environment can now also go away,
because the function context now provides the toplevel block, and the
translation of the loading happens first, so that's good enough.
Makes the LLVM IR a bit more readable, saving a bunch of branches in the
unoptimized code, which benefits unoptimized builds.
