For the rust-call ABI, the last function argument is a tuple that gets
untupled for the actual call. For bare functions using this ABI, the
code has access to the tuple, so we need to tuple the arguments again.
But closures can't actually access the tuple. Their arguments map to the
elements in the tuple. So what we currently do is to tuple the arguments
and then immediately untuple them again, which is pretty useless and we
can just omit it.
After this patch code like `let ref a = *"abcdef"` doesn't cause ICE anymore.
Required for #23121
There are still places in rustc_trans where pointers are always assumed to be thin. In particular, #19064 is not resolved by this patch.
The method with which backwards compatibility was retained ended up leading to
documentation that rustdoc didn't handle well and largely ended up confusing.
Boolean values and small aggregates have a different type in
args/allocas than in SSA values but the intrinsics for volatile and
atomic ops were missing the necessary casts to handle that.
Fixes#23550
This includes a slight refactoring of the `cast_shift_rhs` and related
functions in `trans::base`, so that I can call them from much later in
the compiler's control flow (so that we can clearly dilineate where
automatic conversions of the RHS occur, versus where we check it).
The rhs-checking and fallback-masking is generalized to 8- and 16-bit
values, and the fallback-masking is turned on unconditionally.
Fix#10183.
Is this a [breaking-change]? I would argue it is not; it only adds a
strict definition to what was previously undefined behavior; however,
there might be code that was e.g. assuming that `1_i8 << 17` yields 0.
(This happens in certain contexts and at certain optimization levels.)
* no_split_stack was renamed to no_stack_check
* deriving was renamed to derive
* `use foo::mod` was renamed to `use foo::self`;
* legacy lifetime definitions in closures have been replaced with `for` syntax
* `fn foo() -> &A + B` has been deprecated for some time (needs parens)
* Obsolete `for Sized?` syntax
* Obsolete `Sized? Foo` syntax
* Obsolete `|T| -> U` syntax
This patch changes the type of byte string literals from `&[u8]` to `&[u8; N]`.
It also implements some necessary traits (`IntoBytes`, `Seek`, `Read`, `BufRead`) for fixed-size arrays (also related to #21725) and adds test for #17233, which seems to be resolved.
Fixes#18465
[breaking-change]
Safe fns are no longer subtypes of unsafe fns, but you can coerce from one to the other.
This is a [breaking-change] in that impl fns must now be declared `unsafe` if the trait is declared `unsafe`. In some rare cases, the subtyping change may also direct affect you, but no such cases were encountered in practice.
Fixes#23449.
r? @nrc
This upcast coercion currently never requires vtable changes. It should be generalized.
This is a [breaking-change] -- if you have an impl on an object type like `impl SomeTrait`, then this will no longer be applicable to object types like `SomeTrait+Send`. In the standard library, this primarily affected `Any`, and this PR adds impls for `Any+Send` as to keep the API the same in practice. An alternate workaround is to use UFCS form or standalone fns. For more details, see <https://github.com/rust-lang/rust/issues/18737#issuecomment-78450798>.
r? @nrc
This upcast coercion currently preserves the vtable for the object, but
eventually it can be used to create a derived vtable. The upcast
coercion is not introduced into method dispatch; see comment on #18737
for information about why. Fixes#18737.
This removes the error case of the compression functions, the only errors that
can occur are incorrect parameters or an out-of-memory condition, both of which
are handled with panics in Rust.
Also introduces an extensible `Error` type instead of returning an `Option`.
The type implements a destructor so you can't destructure it.
This removes the error case of the compression functions, the only errors that
can occur are incorrect parameters or an out-of-memory condition, both of which
are handled with panics in Rust.
Also introduces an extensible `Error` type instead of returning an `Option`.
This commit deprecates the `count`, `range` and `range_step` functions
in `iter`, in favor of range notation. To recover all existing
functionality, a new `step_by` adapter is provided directly on `ops::Range`
and `ops::RangeFrom`.
[breaking-change]
r? @alexcrichton
In case that there is a destination for the array, like in
"let x = [expr; n]", we currently don't evaluate the given expression if
n is zero. That's inconsistent with all other cases, including "[expr;
0]" without a destination.
Fixes#23354
This commit deprecates the `count`, `range` and `range_step` functions
in `iter`, in favor of range notation. To recover all existing
functionality, a new `step_by` adapter is provided directly on `ops::Range`
and `ops::RangeFrom`.
[breaking-change]
The new `std::io` module has had some time to bake now, and this commit
stabilizes its functionality. There are still portions of the module which
remain unstable, and below contains a summart of the actions taken.
This commit also deprecates the entire contents of the `old_io` module in a
blanket fashion. All APIs should now have a reasonable replacement in the
new I/O modules.
Stable APIs:
* `std::io` (the name)
* `std::io::prelude` (the name)
* `Read`
* `Read::read`
* `Read::{read_to_end, read_to_string}` after being modified to return a `usize`
for the number of bytes read.
* `ReadExt`
* `Write`
* `Write::write`
* `Write::{write_all, write_fmt}`
* `WriteExt`
* `BufRead`
* `BufRead::{fill_buf, consume}`
* `BufRead::{read_line, read_until}` after being modified to return a `usize`
for the number of bytes read.
* `BufReadExt`
* `BufReader`
* `BufReader::{new, with_capacity}`
* `BufReader::{get_ref, get_mut, into_inner}`
* `{Read,BufRead} for BufReader`
* `BufWriter`
* `BufWriter::{new, with_capacity}`
* `BufWriter::{get_ref, get_mut, into_inner}`
* `Write for BufWriter`
* `IntoInnerError`
* `IntoInnerError::{error, into_inner}`
* `{Error,Display} for IntoInnerError`
* `LineWriter`
* `LineWriter::{new, with_capacity}` - `with_capacity` was added
* `LineWriter::{get_ref, get_mut, into_inner}` - `get_mut` was added)
* `Write for LineWriter`
* `BufStream`
* `BufStream::{new, with_capacities}`
* `BufStream::{get_ref, get_mut, into_inner}`
* `{BufRead,Read,Write} for BufStream`
* `stdin`
* `Stdin`
* `Stdin::lock`
* `Stdin::read_line` - added method
* `StdinLock`
* `Read for Stdin`
* `{Read,BufRead} for StdinLock`
* `stdout`
* `Stdout`
* `Stdout::lock`
* `StdoutLock`
* `Write for Stdout`
* `Write for StdoutLock`
* `stderr`
* `Stderr`
* `Stderr::lock`
* `StderrLock`
* `Write for Stderr`
* `Write for StderrLock`
* `io::Result`
* `io::Error`
* `io::Error::last_os_error`
* `{Display, Error} for Error`
Unstable APIs:
(reasons can be found in the commit itself)
* `Write::flush`
* `Seek`
* `ErrorKind`
* `Error::new`
* `Error::from_os_error`
* `Error::kind`
Deprecated APIs
* `Error::description` - available via the `Error` trait
* `Error::detail` - available via the `Display` implementation
* `thread::Builder::{stdout, stderr}`
Changes in functionality:
* `old_io::stdio::set_stderr` is now a noop as the infrastructure for printing
backtraces has migrated to `std::io`.
[breaking-change]
When this attribute is applied to a function, its return value gets the
noalias attribute, which is how you tell LLVM that the function returns
a \"new\" pointer that doesn't alias anything accessible to the caller,
i.e. it acts like a memory allocator.
Plain malloc doesn't need this attribute because LLVM already knows
about malloc and adds the attribute itself.
When this attribute is applied to a function, its return value gets the
noalias attribute, which is how you tell LLVM that the function returns
a "new" pointer that doesn't alias anything accessible to the caller,
i.e. it acts like a memory allocator.
Plain malloc doesn't need this attribute because LLVM already knows
about malloc and adds the attribute itself.
This commit stabilizes essentially all of the new `std::path` API. The
API itself is changed in a couple of ways (which brings it in closer
alignment with the RFC):
* `.` components are now normalized away, unless they appear at the
start of a path. This in turn effects the semantics of e.g. asking for
the file name of `foo/` or `foo/.`, both of which yield `Some("foo")`
now. This semantics is what the original RFC specified, and is also
desirable given early experience rolling out the new API.
* The `parent` method is now `without_file` and succeeds if, and only
if, `file_name` is `Some(_)`. That means, in particular, that it fails
for a path like `foo/../`. This change affects `pop` as well.
In addition, the `old_path` module is now deprecated.
[breaking-change]
r? @alexcrichton
This commit stabilizes essentially all of the new `std::path` API. The
API itself is changed in a couple of ways (which brings it in closer
alignment with the RFC):
* `.` components are now normalized away, unless they appear at the
start of a path. This in turn effects the semantics of e.g. asking for
the file name of `foo/` or `foo/.`, both of which yield `Some("foo")`
now. This semantics is what the original RFC specified, and is also
desirable given early experience rolling out the new API.
* The `parent` function now succeeds if, and only if, the path has at
least one non-root/prefix component. This change affects `pop` as
well.
* The `Prefix` component now involves a separate `PrefixComponent`
struct, to better allow for keeping both parsed and unparsed prefix data.
In addition, the `old_path` module is now deprecated.
Closes#23264
[breaking-change]
The end result is that common fields (id, name, attributes, etc.) are stored in now-structures `ImplItem` and `TraitItem`.
The signature of a method is no longer duplicated between methods with a body (default/impl) and those without, they now share `MethodSig`.
This is also a [breaking-change] because of minor bugfixes and changes to syntax extensions:
* `pub fn` methods in a trait no longer parse - remove the `pub`, it has no meaning anymore
* `MacResult::make_methods` is now `make_impl_items` and the return type has changed accordingly
* `quote_method` is gone, because `P<ast::Method>` doesn't exist and it couldn't represent a full method anyways - could be replaced by `quote_impl_item`/`quote_trait_item` in the future, but I do hope we realize how silly that combinatorial macro expansion is and settle on a single `quote` macro + some type hints - or just no types at all (only token-trees)
r? @nikomatsakis This is necessary (hopefully also sufficient) for associated constants.
This commit performs a stabilization pass over the `std::fs` module now that
it's had some time to bake. The change was largely just adding `#[stable]` tags,
but there are a few APIs that remain `#[unstable]`.
The following apis are now marked `#[stable]`:
* `std::fs` (the name)
* `File`
* `Metadata`
* `ReadDir`
* `DirEntry`
* `OpenOptions`
* `Permissions`
* `File::{open, create}`
* `File::{sync_all, sync_data}`
* `File::set_len`
* `File::metadata`
* Trait implementations for `File` and `&File`
* `OpenOptions::new`
* `OpenOptions::{read, write, append, truncate, create}`
* `OpenOptions::open` - this function was modified, however, to not attempt to
reject cross-platform openings of directories. This means that some platforms
will succeed in opening a directory and others will fail.
* `Metadata::{is_dir, is_file, len, permissions}`
* `Permissions::{readonly, set_readonly}`
* `Iterator for ReadDir`
* `DirEntry::path`
* `remove_file` - like with `OpenOptions::open`, the extra windows code to
remove a readonly file has been removed. This means that removing a readonly
file will succeed on some platforms but fail on others.
* `metadata`
* `rename`
* `copy`
* `hard_link`
* `soft_link`
* `read_link`
* `create_dir`
* `create_dir_all`
* `remove_dir`
* `remove_dir_all`
* `read_dir`
The following apis remain `#[unstable]`.
* `WalkDir` and `walk` - there are many methods by which a directory walk can be
constructed, and it's unclear whether the current semantics are the right
ones. For example symlinks are not handled super well currently. This is now
behind a new `fs_walk` feature.
* `File::path` - this is an extra abstraction which the standard library
provides on top of what the system offers and it's unclear whether we should
be doing so. This is now behind a new `file_path` feature.
* `Metadata::{accessed, modified}` - we do not currently have a good
abstraction for a moment in time which is what these APIs should likely be
returning, so these remain `#[unstable]` for now. These are now behind a new
`fs_time` feature
* `set_file_times` - like with `Metadata::accessed`, we do not currently have
the appropriate abstraction for the arguments here so this API remains
unstable behind the `fs_time` feature gate.
* `PathExt` - the precise set of methods on this trait may change over time and
some methods may be removed. This API remains unstable behind the `path_ext`
feature gate.
* `set_permissions` - we may wish to expose a more granular ability to set the
permissions on a file instead of just a blanket \"set all permissions\" method.
This function remains behind the `fs` feature.
The following apis are now `#[deprecated]`
* The `TempDir` type is now entirely deprecated and is [located on
crates.io][tempdir] as the `tempdir` crate with [its source][github] at
rust-lang/tempdir.
[tempdir]: https://crates.io/crates/tempdir
[github]: https://github.com/rust-lang/tempdir
The stability of some of these APIs has been questioned over the past few weeks
in using these APIs, and it is intentional that the majority of APIs here are
marked `#[stable]`. The `std::fs` module has a lot of room to grow and the
material is [being tracked in a RFC issue][rfc-issue].
[rfc-issue]: rust-lang/rfcs#939
Closes#22879
[breaking-change]
With this PR in-place constants are handled correctly with respect to debug location assignment.
The PR also adds an (unrelated) test case for debug locations in `extern \"C\"` functions.
Fixes#22432
This commit is an implementation of [RFC 563][rfc] which adds a new
`cfg(debug_assertions)` directive which is specially recognized and calculated
by the compiler. The flag is turned off at any optimization level greater than 1
and may also be explicitly controlled through the `-C debug-assertions`
flag.
[rfc]: https://github.com/rust-lang/rfcs/pull/563
The `debug_assert!` and `debug_assert_eq!` macros now respect this instead of
the `ndebug` variable and `ndebug` no longer holds any meaning to the standard
library.
Code which was previously relying on `not(ndebug)` to gate expensive code should
be updated to rely on `debug_assertions` instead.
Closes#22492
[breaking-change]
This commit performs a stabilization pass over the `std::fs` module now that
it's had some time to bake. The change was largely just adding `#[stable]` tags,
but there are a few APIs that remain `#[unstable]`.
The following apis are now marked `#[stable]`:
* `std::fs` (the name)
* `File`
* `Metadata`
* `ReadDir`
* `DirEntry`
* `OpenOptions`
* `Permissions`
* `File::{open, create}`
* `File::{sync_all, sync_data}`
* `File::set_len`
* `File::metadata`
* Trait implementations for `File` and `&File`
* `OpenOptions::new`
* `OpenOptions::{read, write, append, truncate, create}`
* `OpenOptions::open` - this function was modified, however, to not attempt to
reject cross-platform openings of directories. This means that some platforms
will succeed in opening a directory and others will fail.
* `Metadata::{is_dir, is_file, len, permissions}`
* `Permissions::{readonly, set_readonly}`
* `Iterator for ReadDir`
* `DirEntry::path`
* `remove_file` - like with `OpenOptions::open`, the extra windows code to
remove a readonly file has been removed. This means that removing a readonly
file will succeed on some platforms but fail on others.
* `metadata`
* `rename`
* `copy`
* `hard_link`
* `soft_link`
* `read_link`
* `create_dir`
* `create_dir_all`
* `remove_dir`
* `remove_dir_all`
* `read_dir`
The following apis remain `#[unstable]`.
* `WalkDir` and `walk` - there are many methods by which a directory walk can be
constructed, and it's unclear whether the current semantics are the right
ones. For example symlinks are not handled super well currently. This is now
behind a new `fs_walk` feature.
* `File::path` - this is an extra abstraction which the standard library
provides on top of what the system offers and it's unclear whether we should
be doing so. This is now behind a new `file_path` feature.
* `Metadata::{accessed, modified}` - we do not currently have a good
abstraction for a moment in time which is what these APIs should likely be
returning, so these remain `#[unstable]` for now. These are now behind a new
`fs_time` feature
* `set_file_times` - like with `Metadata::accessed`, we do not currently have
the appropriate abstraction for the arguments here so this API remains
unstable behind the `fs_time` feature gate.
* `PathExt` - the precise set of methods on this trait may change over time and
some methods may be removed. This API remains unstable behind the `path_ext`
feature gate.
* `set_permissions` - we may wish to expose a more granular ability to set the
permissions on a file instead of just a blanket "set all permissions" method.
This function remains behind the `fs` feature.
The following apis are now `#[deprecated]`
* The `TempDir` type is now entirely deprecated and is [located on
crates.io][tempdir] as the `tempdir` crate with [its source][github] at
rust-lang/tempdir.
[tempdir]: https://crates.io/crates/tempdir
[github]: https://github.com/rust-lang/tempdir
The stability of some of these APIs has been questioned over the past few weeks
in using these APIs, and it is intentional that the majority of APIs here are
marked `#[stable]`. The `std::fs` module has a lot of room to grow and the
material is [being tracked in a RFC issue][rfc-issue].
[rfc-issue]: https://github.com/rust-lang/rfcs/issues/939
[breaking-change]
The two main sub-modules, `c_str` and `os_str`, have now had some time to bake
in the standard library. This commits performs a sweep over the modules adding
various stability tags.
The following APIs are now marked `#[stable]`
* `OsString`
* `OsStr`
* `OsString::from_string`
* `OsString::from_str`
* `OsString::new`
* `OsString::into_string`
* `OsString::push` (renamed from `push_os_str`, added an `AsOsStr` bound)
* various trait implementations for `OsString`
* `OsStr::from_str`
* `OsStr::to_str`
* `OsStr::to_string_lossy`
* `OsStr::to_os_string`
* various trait implementations for `OsStr`
* `CString`
* `CStr`
* `NulError`
* `CString::new` - this API's implementation may change as a result of
rust-lang/rfcs#912 but the usage of `CString::new(thing)` looks like it is
unlikely to change. Additionally, the `IntoBytes` bound is also likely to
change but the set of implementors for the trait will not change (despite the
trait perhaps being renamed).
* `CString::from_vec_unchecked`
* `CString::as_bytes`
* `CString::as_bytes_with_nul`
* `NulError::nul_position`
* `NulError::into_vec`
* `CStr::from_ptr`
* `CStr::as_ptr`
* `CStr::to_bytes`
* `CStr::to_bytes_with_nul`
* various trait implementations for `CStr`
The following APIs remain `#[unstable]`
* `OsStr*Ext` traits remain unstable as the organization of `os::platform` is
uncertain still and the traits may change location.
* `AsOsStr` remains unstable as generic conversion traits are likely to be
rethought soon.
The following APIs were deprecated
* `OsString::push_os_str` is now called `push` and takes `T: AsOsStr` instead (a
superset of the previous functionality).
This commit is an implementation of [RFC 563][rfc] which adds a new
`cfg(debug_assertions)` directive which is specially recognized and calculated
by the compiler. The flag is turned off at any optimization level greater than 1
and may also be explicitly controlled through the `-C debug-assertions`
flag.
[rfc]: https://github.com/rust-lang/rfcs/pull/563
The `debug_assert!` and `debug_assert_eq!` macros now respect this instead of
the `ndebug` variable and `ndebug` no longer holds any meaning to the standard
library.
Code which was previously relying on `not(ndebug)` to gate expensive code should
be updated to rely on `debug_assertions` instead.
Closes#22492
[breaking-change]
The main gist of this PR is commit 1077efb which removes the list of supertraits from the `TraitDef` and pulls them into a separate table, which is accessed via `lookup_super_predicates`. This is analogous to `lookup_predicates`, which gets the complete where clause. This allows us to create the `TraitDef`, which contains the list generics and so forth, without fully knowing the list of supertraits. This in turn allows the *supertrait listing* to contain references to associated types like `<Self as Foo>::Item`, which were previously impossible because conversion required having the `TraitDef` for `Foo`.
We do not yet support `Self::Item` in a supertrait listing. This doesn't work because to convert that, it attempts to expand out the full set of supertraits, which are in the process of being created. This could potentially be worked out by having the expansion of supertraits proceed in a lazy fashion, but we'd have to define shadowing rules for associated types which we don't currently have.
Along the way (in 9de9ec5) I also removed the restriction against duplicate bounds and generalized the code so that it can handle having the same supertrait multiple times with different arguments, e.g. `Foo : Bar<i32> + Bar<u32>`. This restriction was serving no particular purpose, since the same trait could be extended multiple times indirectly, and in the era of multidispatch it is actively harmful.
This is technically a [breaking-change] because it affects the definition of a super-trait. Anything in a where clause that looks like `where Self : Foo` is now considered a supertrait. Because cycles are disallowed in supertraits, that could lead to some errors. This has not been observed in any existing code.
r? @nrc
Automatic has-same-types testing methodology can be found in #22501.
Because most of them don't work with `--pretty=typed`, compile-fail tests were manually audited.
r? @aturon
This commit deprecates the majority of std::old_io::fs in favor of std::fs and
its new functionality. Some functions remain non-deprecated but are now behind a
feature gate called `old_fs`. These functions will be deprecated once
suitable replacements have been implemented.
The compiler has been migrated to new `std::fs` and `std::path` APIs where
appropriate as part of this change.
Many of the modifications putting in `Box::new` calls also include a
pointer to Issue 22405, which tracks going back to `box <expr>` if
possible in the future.
(Still tried to use `Box<_>` where it sufficed; thus some tests still
have `box_syntax` enabled, as they use a mix of `box` and `Box::new`.)
Precursor for overloaded-`box` and placement-`in`; see Issue 22181.
Rebase and follow-through on work done by @cmr and @aatch.
Implements most of rust-lang/rfcs#560. Errors encountered from the checks during building were fixed.
The checks for division, remainder and bit-shifting have not been implemented yet.
See also PR #20795
cc @Aatch ; cc @nikomatsakis
This changes the type of some public constants/statics in libunicode.
Notably some `&'static &'static [(char, char)]` have changed
to `&'static [(char, char)]`. The regexp crate seems to be the
sole user of these, yet this is technically a [breaking-change]
However, I left the ICEs rather than switching to nicer error
reporting there; these cases *should* be detected prior to hitting
trans, and thus ICE'ing here is appropriate.
(So why switch to `eval_const_expr_partial`? Because I want to try to
eliminate all uses of `eval_const_expr` entirely.)
Adds overflow checking to integer addition, multiplication, and subtraction
when `-Z force-overflow-checks` is true, or if `--cfg ndebug` is not passed to
the compiler. On overflow, it panics with `arithmetic operation overflowed`.
Also adds `overflowing_add`, `overflowing_sub`, and `overflowing_mul`
intrinsics for doing unchecked arithmetic.
[breaking-change]
Remove the synthetic \"region bound\" from closures and instead update how
type-outlives works for closure types so that it ensures that all upvars
outlive the region in question. This gives the same guarantees but
without introducing artificial regions (and gives better error messages
to boot). This is refactoring towards #3696.
r? @pnkfelix
This changes the type of some public constants/statics in libunicode.
Notably some `&'static &'static [(char, char)]` have changed
to `&'static [(char, char)]`. The regexp crate seems to be the
sole user of these, yet this is technically a [breaking-change]
type-outlives works for closure types so that it ensures that all upvars
outlive the region in question. This gives the same guarantees but
without introducing artificial regions (and gives better error messages
to boot).
... objects
For method calls through trait objects, we currently generate the llvm
function argument attributes using the non-opaque method signature that
still has the trait object fat pointer for the self pointer. This leads
to attributes that are plain wrong, e.g. noalias. As we don't know
anything about the concrete type of the underlying object, we must
replace the self argument with an opaque i8 pointer before applying the
attributes.
For method calls through trait objects, we currently generate the llvm
function argument attributes using the non-opaque method signature that
still has the trait object fat pointer for the self pointer. This leads
to attributes that are plain wrong, e.g. noalias. As we don't know
anything about the concrete type of the underlying object, we must
replace the self argument with an opaque i8 pointer before applying the
attributes.
static_assert is documented as working on static with type `bool`, but
we currently accept it on any const static and crash when the const has
an non-integral type.
This is a breaking-change for anyone who used static_assert on types
likes i32, which happened to work but seems like an unintended
consequence of the missing error checking.
[breaking-change]
Fixes#22056
static_assert is documented as working on static with type `bool`, but
we currently accept it on any const static and crash when the const has
an non-integral type.
This is a breaking-change for anyone who used static_assert on types
likes i32, which happened to work but seems like an unintended
consequence of the missing error checking.
[breaking-change]
Fixes#22056
Now that the `std::env` module has had some time to bake this commit marks most
of its APIs as `#[stable]`. Some notable APIs that are **not** stable (and still
use the same `env` feature gate) are:
* `{set,get}_exit_status` - there are still questions about whether this is the
right interface for setting/getting the exit status of a process.
* `page_size` - this may change location in the future or perhaps name as well.
This also effectively closes#22122 as the variants of `VarError` are
`#[stable]` now. (this is done intentionally)
Now that the `std::env` module has had some time to bake this commit marks most
of its APIs as `#[stable]`. Some notable APIs that are **not** stable (and still
use the same `env` feature gate) are:
* `{set,get}_exit_status` - there are still questions about whether this is the
right interface for setting/getting the exit status of a process.
* `page_size` - this may change location in the future or perhaps name as well.
This also effectively closes#22122 as the variants of `VarError` are
`#[stable]` now. (this is done intentionally)
Fixes#22525
I wasn't sure if I should reuse `write::get_llvm_opt_level` or not. It returns an `llvm::CodeGenOptLevel`, which is the Rust binding for `CodeGenOpt::Level`. `lto.rs` is passing an optlevel to LLVM's `PassManagerBuilder`, which takes an unsigned int. `PassManagerBuilder`'s optlevel uses essentially the same enumeration (i.e. 0-3 with 2 as default), but it's implicit.
aatch's cfg revisions, namely to match expressions
Revise handling of match expressions so that arms branch to next arm.
Update the graphviz tests accordingly.
Fixes#22073. (Includes regression test for the issue.)
RFC 817 is not yet accepted, but I wanted to put this code up so people can see how it works. And to be ready lest it should be accepted.
cc rust-lang/rfcs#817
This is one more step towards completing #13231
This series of commits add support for default trait implementations. The changes in this PR don't break existing code and they are expected to preserve the existing behavior in the compiler as far as built-in bounds checks go.
The PR adds negative implementations of `Send`/`Sync` for some types and it removes the special cases for `Send`/`Sync` during the trait obligations checks. That is, it now fully relies on the traits check rather than lang items.
Once this patch lands and a new snapshot is created, it'll be possible to add default impls for `Send` and `Sync` and remove entirely the use of `BuiltinBound::{BoundSend,BoundSync}` for positive implementations as well.
This PR also removes the restriction on negative implementations. That is, it is now possible to add negative implementations for traits other than `Send`/`Sync`
We already do this for the function arguments, but miss it for the
retslot pointer, which can lead to LLVM assertions because the retslot
has the wrong type.
Fixes#22663
We already do this for the function arguments, but miss it for the
retslot pointer, which can lead to LLVM assertions because the retslot
has the wrong type.
Fixes#22663
In `if loop {} {}`, the `if` is actually unreachable, but we didn't
handle that correctly and when trying to translate the `if` we tried to
branch on the \"return value\" of the loop expression, which is not an
`i1` and therefore triggered an LLVM assertion.
In `if loop {} {}`, the `if` is actually unreachable, but we didn't
handle that correctly and when trying to translate the `if` we tried to
branch on the "return value" of the loop expression, which is not an
`i1` and therefore triggered an LLVM assertion.
This commit is an implementation of [RFC 592][r592] and [RFC 840][r840]. These
two RFCs tweak the behavior of `CString` and add a new `CStr` unsized slice type
to the module.
[r592]: https://github.com/rust-lang/rfcs/blob/master/text/0592-c-str-deref.md
[r840]: https://github.com/rust-lang/rfcs/blob/master/text/0840-no-panic-in-c-string.md
The new `CStr` type is only constructable via two methods:
1. By `deref`'ing from a `CString`
2. Unsafely via `CStr::from_ptr`
The purpose of `CStr` is to be an unsized type which is a thin pointer to a
`libc::c_char` (currently it is a fat pointer slice due to implementation
limitations). Strings from C can be safely represented with a `CStr` and an
appropriate lifetime as well. Consumers of `&CString` should now consume `&CStr`
instead to allow producers to pass in C-originating strings instead of just
Rust-allocated strings.
A new constructor was added to `CString`, `new`, which takes `T: IntoBytes`
instead of separate `from_slice` and `from_vec` methods (both have been
deprecated in favor of `new`). The `new` method returns a `Result` instead of
panicking. The error variant contains the relevant information about where the
error happened and bytes (if present). Conversions are provided to the
`io::Error` and `old_io::IoError` types via the `FromError` trait which
translate to `InvalidInput`.
This is a breaking change due to the modification of existing `#[unstable]` APIs
and new deprecation, and more detailed information can be found in the two RFCs.
Notable breakage includes:
* All construction of `CString` now needs to use `new` and handle the outgoing
`Result`.
* Usage of `CString` as a byte slice now explicitly needs a `.as_bytes()` call.
* The `as_slice*` methods have been removed in favor of just having the
`as_bytes*` methods.
Closes#22469Closes#22470
[breaking-change]
This commit is an implementation of [RFC 823][rfc] which is another pass over
the `std::hash` module for stabilization. The contents of the module were not
entirely marked stable, but some portions which remained quite similar to the
previous incarnation are now marked `#[stable]`. Specifically:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0823-hash-simplification.md
* `std::hash` is now stable (the name)
* `Hash` is now stable
* `Hash::hash` is now stable
* `Hasher` is now stable
* `SipHasher` is now stable
* `SipHasher::new` and `new_with_keys` are now stable
* `Hasher for SipHasher` is now stable
* Many `Hash` implementations are now stable
All other portions of the `hash` module remain `#[unstable]` as they are less
commonly used and were recently redesigned.
This commit is a breaking change due to the modifications to the `std::hash` API
and more details can be found on the [RFC][rfc].
Closes#22467
[breaking-change]
In trans_slice_vec we currently use arrayalloca, which gives us a
pointer to the element type with enough memory allocated for the
requested number of elements. This works, but everywhere else we use
the [n x T] type for fixed size arrays and so we have to bitcast the
pointer here. Let's directly use the proper type for the allocation and
remove some code duplication along the way.
Take 2. This PR includes a bunch of refactoring that was part of an experimental branch implementing [implied bounds]. That particular idea isn't ready to go yet, but the refactoring proved useful for fixing #22246. The implied bounds branch also exposed #22110 so a simple fix for that is included here. I still think some more refactoring would be a good idea here -- in particular I think most of the code in wf.rs is kind of duplicating the logic in implicator and should go, but I decided to post this PR and call it a day before diving into that. I'll write a bit more details about the solutions I adopted in the various bugs. I patched the two issues I was concerned about, which was the handling of supertraits and HRTB (the latter turned out to be fine, so I added a comment explaining why.)
r? @pnkfelix (for now, anyway)
cc @aturon
[implied bounds]: http://smallcultfollowing.com/babysteps/blog/2014/07/06/implied-bounds/
This overlaps with #22276 (I left make check running overnight) but covers a number of additional cases and has a few rewrites where the clones are not even necessary.
This also implements `RandomAccessIterator` for `iter::Cloned`
cc @steveklabnik, you may want to glance at this before #22281 gets the bors treatment
This commit is an implementation of [RFC 592][r592] and [RFC 840][r840]. These
two RFCs tweak the behavior of `CString` and add a new `CStr` unsized slice type
to the module.
[r592]: https://github.com/rust-lang/rfcs/blob/master/text/0592-c-str-deref.md
[r840]: https://github.com/rust-lang/rfcs/blob/master/text/0840-no-panic-in-c-string.md
The new `CStr` type is only constructable via two methods:
1. By `deref`'ing from a `CString`
2. Unsafely via `CStr::from_ptr`
The purpose of `CStr` is to be an unsized type which is a thin pointer to a
`libc::c_char` (currently it is a fat pointer slice due to implementation
limitations). Strings from C can be safely represented with a `CStr` and an
appropriate lifetime as well. Consumers of `&CString` should now consume `&CStr`
instead to allow producers to pass in C-originating strings instead of just
Rust-allocated strings.
A new constructor was added to `CString`, `new`, which takes `T: IntoBytes`
instead of separate `from_slice` and `from_vec` methods (both have been
deprecated in favor of `new`). The `new` method returns a `Result` instead of
panicking. The error variant contains the relevant information about where the
error happened and bytes (if present). Conversions are provided to the
`io::Error` and `old_io::IoError` types via the `FromError` trait which
translate to `InvalidInput`.
This is a breaking change due to the modification of existing `#[unstable]` APIs
and new deprecation, and more detailed information can be found in the two RFCs.
Notable breakage includes:
* All construction of `CString` now needs to use `new` and handle the outgoing
`Result`.
* Usage of `CString` as a byte slice now explicitly needs a `.as_bytes()` call.
* The `as_slice*` methods have been removed in favor of just having the
`as_bytes*` methods.
Closes#22469Closes#22470
[breaking-change]
This commit is an implementation of [RFC 823][rfc] which is another pass over
the `std::hash` module for stabilization. The contents of the module were not
entirely marked stable, but some portions which remained quite similar to the
previous incarnation are now marked `#[stable]`. Specifically:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0823-hash-simplification.md
* `std::hash` is now stable (the name)
* `Hash` is now stable
* `Hash::hash` is now stable
* `Hasher` is now stable
* `SipHasher` is now stable
* `SipHasher::new` and `new_with_keys` are now stable
* `Hasher for SipHasher` is now stable
* Many `Hash` implementations are now stable
All other portions of the `hash` module remain `#[unstable]` as they are less
commonly used and were recently redesigned.
This commit is a breaking change due to the modifications to the `std::hash` API
and more details can be found on the [RFC][rfc].
Closes#22467
[breaking-change]
This commit renames the features for the `std::old_io` and `std::old_path`
modules to `old_io` and `old_path` to help facilitate migration to the new APIs.
This is a breaking change as crates which mention the old feature names now need
to be renamed to use the new feature names.
[breaking-change]
- Now "make check-stage2-T-aarch64-linux-android-H-x86_64-unknown-linux-gnu" works (#21773)
- Fix & enable debuginfo tests for android (#10381)
- Fix & enable more tests for android (both for arm/aarch64)
- Enable many already-pass tests on android (both for arm/aarch64)
When matching against strings/slices, we call the comparison function
for strings, which takes two string slices by value. The slices are
passed in memory, and currently we just pass in a pointer to the
original slice. That can cause misoptimizations because we emit a call
to llvm.lifetime.end for all by-value arguments at the end of a
function, which in this case marks the original slice as dead.
So we need to properly create copies of the slices to pass them to the
comparison function.
Fixes#22008
In trans_slice_vec we currently use arrayalloca, which gives us a
pointer to the element type with enough memory allocated for the
requested number of elements. This works, but everywhere else we use
the [n x T] type for fixed size arrays and so we have to bitcast the
pointer here. Let's directly use the proper type for the allocation and
remove some code duplication along the way.
When matching against strings/slices, we call the comparison function
for strings, which takes two string slices by value. The slices are
passed in memory, and currently we just pass in a pointer to the
original slice. That can cause misoptimizations because we emit a call
to llvm.lifetime.end for all by-value arguments at the end of a
function, which in this case marks the original slice as dead.
So we need to properly create copies of the slices to pass them to the
comparison function.
Fixes#22008
Add `#[rustc_error]` annotation, which causes trans to signal an error
if found on the `main()` function. This lets you write tests that live
in `compile-fail` but are expected to compile successfully. This is
handy when you have many small variations on a theme that you want to
keep together, and you are just testing the type checker, not the
runtime semantics.
r? @pnkfelix
This is super black magic internals at the moment, but having it
somewhere semi-public seems good. The current versions weren't being
rendered, and they'll be useful for some people.
Fixes#21281
r? @nikomatsakis @kmcallister
It is only allowed in paths now, where it will either work inside a `trait`
or `impl` item, or not resolve outside of it.
[breaking-change]
Closes#22137
if found on the `main()` function. This lets you write tests that live
in `compile-fail` but are expected to compile successfully. This is
handy when you have many small variations on a theme that you want to
keep together, and you are just testing the type checker, not the
runtime semantics.
It is only allowed in paths now, where it will either work inside a `trait`
or `impl` item, or not resolve outside of it.
[breaking-change]
Closes#22137
This commit tweaks the interface of the `std::env` module to make it more
ergonomic for common usage:
* `env::var` was renamed to `env::var_os`
* `env::var_string` was renamed to `env::var`
* `env::args` was renamed to `env::args_os`
* `env::args` was re-added as a panicking iterator over string values
* `env::vars` was renamed to `env::vars_os`
* `env::vars` was re-added as a panicking iterator over string values.
This should make common usage (e.g. unicode values everywhere) more ergonomic
as well as "the default". This is also a breaking change due to the differences
of what's yielded from each of these functions, but migration should be fairly
easy as the defaults operate over `String` which is a common type to use.
[breaking-change]
This commit tweaks the interface of the `std::env` module to make it more
ergonomic for common usage:
* `env::var` was renamed to `env::var_os`
* `env::var_string` was renamed to `env::var`
* `env::args` was renamed to `env::args_os`
* `env::args` was re-added as a panicking iterator over string values
* `env::vars` was renamed to `env::vars_os`
* `env::vars` was re-added as a panicking iterator over string values.
This should make common usage (e.g. unicode values everywhere) more ergonomic
as well as "the default". This is also a breaking change due to the differences
of what's yielded from each of these functions, but migration should be fairly
easy as the defaults operate over `String` which is a common type to use.
[breaking-change]
This is a resurrection and heavy revision/expansion of a PR that pcwalton did to resolve#8861.
The most relevant, user-visible semantic change is this: #[unsafe_destructor] is gone. Instead, if a type expression for some value has a destructor, then any lifetimes referenced within that type expression must strictly outlive the scope of the value.
See discussion on https://github.com/rust-lang/rfcs/pull/769
immediately surrounding a node that is a terminating_scope
(e.g. statements, looping forms) during which the destructors run (the
destructors for temporaries from the execution of that node, that is).
Introduced DestructionScopeData newtype wrapper around ast::NodeId, to
preserve invariant that FreeRegion and ScopeChain::BlockScope carry
destruction scopes (rather than arbitrary CodeExtents).
Insert DestructionScope and block Remainder into enclosing CodeExtents
hierarchy.
Add more doc for DestructionScope, complete with ASCII art.
Switch to constructing DestructionScope rather than Misc in a number
of places, mostly related to `ty::ReFree` creation, and use
destruction-scopes of node-ids at various calls to
liberate_late_bound_regions.
middle::resolve_lifetime: Map BlockScope to DestructionScope in `fn resolve_free_lifetime`.
Add the InnermostDeclaringBlock and InnermostEnclosingExpr enums that
are my attempt to clarify the region::Context structure, and that
later commmts build upon.
Improve the debug output for `CodeExtent` attached to `ty::Region::ReScope`.
Loosened an assertion in `rustc_trans::trans::cleanup` to account for
`DestructionScope`. (Perhaps this should just be switched entirely
over to `DestructionScope`, rather than allowing for either `Misc` or
`DestructionScope`.)
----
Even though the DestructionScope is new, this particular commit should
not actually change the semantics of any current code.
This is super black magic internals at the moment, but having it
somewhere semi-public seems good. The current versions weren't being
rendered, and they'll be useful for some people.
Fixes#21281
As the function comment already says, the types generated in the
foreign_signture function don't necessarily match the types used for a
corresponding rust function. Therefore we can't just use these types to
guide the translation of the wrapper function that bridges between the
external ABI and the rust ABI. Instead, we can query LLVM about the
types used in the rust function and use those to generate an appropriate
wrapper.
Fixes#21454
This was particularly helpful in the time just after OIBIT's
implementation to make sure things that were supposed to be Copy
continued to be, but it's now creates a lot of noise for types that
intentionally don't want to be Copy.
r? @alexcrichton
Currently \"k / 2\" generates one (k: uint) or two (k: int) \"br false,
...\" instructions and the corresponding basic blocks, producing quite
some noise and making the code unnecessarily hard to read.
Additionally we can skip translation if the code would end up
unreachable anyway.
This can be considered partial work on #8256.
The main observable change: macro expansion sometimes results in spans where `lo > hi`; so for now, when we have such a span, do not attempt to return a snippet result.
(Longer term, we might think about whether we could still present a snippet for the cases where this arises, e.g. perhaps by showing the whole macro as the snippet, assuming that is the sole cause of such spans; or by somehow looking up the closest AST node that holds both `lo` and `hi`, and showing that.)
As a drive-by, revised the API to return a `Result` rather than an `Option`, with better information-packed error value that should help us (and maybe also our users) identify the causes of such problems in the future. Ideally the call-sites that really want an actual snippet would be updated to catch the newly added `Err` case and print something meaningful about it, but that is not part of this PR.
This can be considered partial work on #8256.
The main observable change: macro expansion sometimes results in spans
where `lo > hi`; so for now, when we have such a span, do not attempt
to return a snippet result.
(Longer term, we might think about whether we could still present a
snippet for the cases where this arises, e.g. perhaps by showing the
whole macro as the snippet, assuming that is the sole cause of such
spans; or by somehow looking up the closest AST node that holds both
`lo` and `hi`, and showing that.)
As a drive-by, revised the API to return a `Result` rather than an
`Option`, with better information-packed error value that should help
us (and maybe also our users) identify the causes of such problems in
the future. Ideally the call-sites that really want an actual snippet
would be updated to catch the newly added `Err` case and print
something meaningful about it, but that is not part of this PR.
This needs a snapshot that includes #21805 before it can be merged.
There are some places where type inference regressed after I removed the annotations (see `FIXME`s). cc @nikomatsakis.
r? @eddyb or anyone
(I'll remove the `FIXME`s before merging, as they are only intended to point out regressions)
On OSX the linker has a separate framework lookup path which is specified via
the `-F` flag. This adds a new kind of `-L` path recognized by the compiler for
frameworks to be passed through to the linker.
Closes#20259
On OSX the linker has a separate framework lookup path which is specified via
the `-F` flag. This adds a new kind of `-L` path recognized by the compiler for
frameworks to be passed through to the linker.
Closes#20259
Currently "k / 2" generates one (k: uint) or two (k: int) "br false,
..." instructions and the corresponding basic blocks, producing quite
some noise and making the code unnecessarily hard to read.
Additionally we can skip translation if the code would end up
unreachable anyway.
`{` and `}` aren’t valid characters on ARM, so this makes Unicode characters render as, e.g., `$u38d$` instead of `$u{38d}`.
This also fixes a small bug where `)` (**r**ight **p**arenthesis) and `*` (**r**aw **p**ointer) would both mangle to `$RP$`, making `)` show up as `*` in backtraces.
This was particularly helpful in the time just after OIBIT's
implementation to make sure things that were supposed to be Copy
continued to be, but it's now creates a lot of noise for types that
intentionally don't want to be Copy.
This *almost* completes the job for #16440. The idea is that even if we do not know whether some closure type `C` implements `Fn` or `FnMut` (etc), we still know its argument and return types. So if we see an obligation `C : Fn(_0)`, we can unify `_0` with those argument types while still considering the obligation ambiguous and unsatisfied. This helps to make a lot of progress with type inference even before closure kind inference is done.
As part of this PR, the explicit `:` syntax is removed from the AST and completely ignored. We still infer the closure kind based on the expected type if that is available. There are several reasons for this. First, deciding the closure kind earlier is always better, as it allows us to make more progress. Second, this retains a (admittedly obscure) way for users to manually specify the closure kind, which is useful for writing tests if nothing else. Finally, there are still some cases where inference can fail, so it may be useful to have this manual override. (The expectation is that we will eventually revisit an explicit syntax for specifying the closure kind, but it will not be `:` and may be some sort of generalization of the `||` syntax to handle other traits as well.)
This commit does not *quite* fix#16640 because a snapshot is still needed to enable the obsolete syntax errors for explicit `&mut:` and friends.
r? @eddyb as he reviewed the prior patch in this direction
`{` and `}` aren’t valid characters on ARM.
This also fixes a small bug where `)` (**r**ight **p**arenthesis) and `*`
(**r**aw **p**ointer) would both mangle to `$RP$`, making `)` show up as `*` in
backtraces.
As part of [RFC 474](https://github.com/rust-lang/rfcs/pull/474), this
commit renames `std::path` to `std::old_path`, leaving the existing path
API in place to ease migration to the new one. Updating should be as
simple as adjusting imports, and the prelude still maps to the old path
APIs for now.
[breaking-change]
upgrade the inference based on expected type so that it is able to
infer the fn kind in isolation even if the full signature is not
available (and we could perhaps do better still in some cases, such as
extracting just the types of the arguments but not the return value).
Now that associated types are fully implemented the iterator adaptors only need
type parameters which are associated with actual storage. All other type
parameters can either be derived from these (e.g. they are an associated type)
or can be bare on the `impl` block itself.
This is a breaking change due to the removal of type parameters on these
iterator adaptors, but code can fairly easily migrate by just deleting the
relevant type parameters for each adaptor. Other behavior should not be
affected.
Closes#21839
[breaking-change]
Now that associated types are fully implemented the iterator adaptors only need
type parameters which are associated with actual storage. All other type
parameters can either be derived from these (e.g. they are an associated type)
or can be bare on the `impl` block itself.
This is a breaking change due to the removal of type parameters on these
iterator adaptors, but code can fairly easily migrate by just deleting the
relevant type parameters for each adaptor. Other behavior should not be
affected.
Closes#21839
[breaking-change]
This is an implementation of [RFC 578][rfc] which adds a new `std::env` module
to replace most of the functionality in the current `std::os` module. More
details can be found in the RFC itself, but as a summary the following methods
have all been deprecated:
[rfc]: https://github.com/rust-lang/rfcs/pull/578
* `os::args_as_bytes` => `env::args`
* `os::args` => `env::args`
* `os::consts` => `env::consts`
* `os::dll_filename` => no replacement, use `env::consts` directly
* `os::page_size` => `env::page_size`
* `os::make_absolute` => use `env::current_dir` + `join` instead
* `os::getcwd` => `env::current_dir`
* `os::change_dir` => `env::set_current_dir`
* `os::homedir` => `env::home_dir`
* `os::tmpdir` => `env::temp_dir`
* `os::join_paths` => `env::join_paths`
* `os::split_paths` => `env::split_paths`
* `os::self_exe_name` => `env::current_exe`
* `os::self_exe_path` => use `env::current_exe` + `pop`
* `os::set_exit_status` => `env::set_exit_status`
* `os::get_exit_status` => `env::get_exit_status`
* `os::env` => `env::vars`
* `os::env_as_bytes` => `env::vars`
* `os::getenv` => `env::var` or `env::var_string`
* `os::getenv_as_bytes` => `env::var`
* `os::setenv` => `env::set_var`
* `os::unsetenv` => `env::remove_var`
Many function signatures have also been tweaked for various purposes, but the
main changes were:
* `Vec`-returning APIs now all return iterators instead
* All APIs are now centered around `OsString` instead of `Vec<u8>` or `String`.
There is currently on convenience API, `env::var_string`, which can be used to
get the value of an environment variable as a unicode `String`.
All old APIs are `#[deprecated]` in-place and will remain for some time to allow
for migrations. The semantics of the APIs have been tweaked slightly with regard
to dealing with invalid unicode (panic instead of replacement).
The new `std::env` module is all contained within the `env` feature, so crates
must add the following to access the new APIs:
#![feature(env)]
[breaking-change]
