Upgrade to tracing-subscriber 0.2.13
The primary motivation is to get the changes from
https://github.com/tokio-rs/tracing/pull/990. Example output:
```
$ RUSTDOC_LOG=debug rustdoc +rustc2
warning: some trace filter directives would enable traces that are disabled statically
| `debug` would enable the DEBUG level for all targets
= note: the static max level is `info`
= help: to enable DEBUG logging, remove the `max_level_info` feature
```
r? `@Mark-Simulacrum`
cc `@hawkw` ❤️
Use `pretty::create_dump_file` for dumping dataflow results
The old code wasn't incorporating promoteds into the path, meaning other `dot` files could get clobbered. Use the MIR dump infrastructure to generate paths so that this doesn't occur in the future.
Detect blocks that could be struct expr bodies
This approach lives exclusively in the parser, so struct expr bodies
that are syntactically correct on their own but are otherwise incorrect
will still emit confusing errors, like in the following case:
```rust
fn foo() -> Foo {
bar: Vec::new()
}
```
```
error[E0425]: cannot find value `bar` in this scope
--> src/file.rs:5:5
|
5 | bar: Vec::new()
| ^^^ expecting a type here because of type ascription
error[E0214]: parenthesized type parameters may only be used with a `Fn` trait
--> src/file.rs:5:15
|
5 | bar: Vec::new()
| ^^^^^ only `Fn` traits may use parentheses
error[E0107]: wrong number of type arguments: expected 1, found 0
--> src/file.rs:5:10
|
5 | bar: Vec::new()
| ^^^^^^^^^^ expected 1 type argument
```
If that field had a trailing comma, that would be a parse error and it
would trigger the new, more targetted, error:
```
error: struct literal body without path
--> file.rs:4:17
|
4 | fn foo() -> Foo {
| _________________^
5 | | bar: Vec::new(),
6 | | }
| |_^
|
help: you might have forgotten to add the struct literal inside the block
|
4 | fn foo() -> Foo { Path {
5 | bar: Vec::new(),
6 | } }
|
```
Partially address last remaining part of #34255.
perf: UninhabitedEnumBranching avoid n^2
Avoid n² complexity. This showed up in a profile for match-stress-enum that has 8192 variants
I have only profiled locally against `match-stress-enum`, so we should have it perf tested to make sure it does not regress other crates.
The primary motivation is to get the changes from
https://github.com/tokio-rs/tracing/pull/990. Example output:
```
$ RUSTDOC_LOG=debug rustdoc +rustc2
warning: some trace filter directives would enable traces that are disabled statically
| `debug` would enable the DEBUG level for all targets
= note: the static max level is `info`
= help: to enable DEBUG logging, remove the `max_level_info` feature
```
- Remove useless test
This was testing for an ICE when passing `RUST_LOG=rustc_middle`. I
noticed it because it started giving the tracing warning (because tests
are not run with debug-logging enabled). Since this bug seems unlikely
to re-occur, I just removed it altogether.
Prevent stack overflow in deeply nested types.
Related issue #75577 (?)
Unfortunately, I am unable to test whether this actually solves the problem because apparently, 12GB RAM + 2GB swap is not enough to compile the (admittedly toy) source file.
This approach lives exclusively in the parser, so struct expr bodies
that are syntactically correct on their own but are otherwise incorrect
will still emit confusing errors, like in the following case:
```rust
fn foo() -> Foo {
bar: Vec::new()
}
```
```
error[E0425]: cannot find value `bar` in this scope
--> src/file.rs:5:5
|
5 | bar: Vec::new()
| ^^^ expecting a type here because of type ascription
error[E0214]: parenthesized type parameters may only be used with a `Fn` trait
--> src/file.rs:5:15
|
5 | bar: Vec::new()
| ^^^^^ only `Fn` traits may use parentheses
error[E0107]: wrong number of type arguments: expected 1, found 0
--> src/file.rs:5:10
|
5 | bar: Vec::new()
| ^^^^^^^^^^ expected 1 type argument
```
If that field had a trailing comma, that would be a parse error and it
would trigger the new, more targetted, error:
```
error: struct literal body without path
--> file.rs:4:17
|
4 | fn foo() -> Foo {
| _________________^
5 | | bar: Vec::new(),
6 | | }
| |_^
|
help: you might have forgotten to add the struct literal inside the block
|
4 | fn foo() -> Foo { Path {
5 | bar: Vec::new(),
6 | } }
|
```
Partially address last part of #34255.
Give `impl Trait` in a `const fn` its own feature gate
...previously it was gated under `#![feature(const_fn)]`.
I think we actually want to do this in all const-contexts? If so, this should be `#![feature(const_impl_trait)]` instead. I don't think there's any way to make use of `impl Trait` within a `const` initializer.
cc #77463
r? `@oli-obk`
resolve: improve "try using the enum's variant"
Fixes#73427.
This PR improves the "try using the enum's variant" suggestion:
- Variants in suggestions would not result in more errors (e.g. use of a struct variant is only suggested if the suggestion can trivially construct that variant). Therefore, suggestions are only emitted for variants that have no fields (since the suggestion can't know what value fields would have).
- Suggestions include the syntax for constructing the variant. If a struct or tuple variant is suggested, then it is constructed in the suggestion - unless in pattern-matching or when arguments are already provided.
- A help message is added which mentions the variants which are no longer suggested.
All of the diagnostic logic introduced by this PR is separated from the normal code path for a successful compilation.
r? `@estebank`
Rollup of 11 pull requests
Successful merges:
- #76784 (Add some docs to rustdoc::clean::inline and def_id functions)
- #76911 (fix VecDeque::iter_mut aliasing issues)
- #77400 (Fix suggestions for x.py setup)
- #77515 (Update to chalk 0.31)
- #77568 (inliner: use caller param_env)
- #77571 (Use matches! for core::char methods)
- #77582 (Move `EarlyOtherwiseBranch` to mir-opt-level 2)
- #77590 (Update RLS and Rustfmt)
- #77605 (Fix rustc_def_path to show the full path and not the trimmed one)
- #77614 (Let backends access span information)
- #77624 (Add c as a shorthand check alternative for new options #77603)
Failed merges:
r? `@ghost`
Let backends access span information
Sometimes, a backend may need to emit warnings, errors, or otherwise need to know the span of the current item in a basic block. So, add a `set_span` method to give the backend that information.
The `set_source_location` method already partially does this, however, it's disabled when debug info is disabled. There needs to be a way to unconditionally provide the span.
inliner: use caller param_env
We used the callee param env instead of the caller param env by accident in #77430, this PR fixes that and caches it in the `Inliner` struct.
fixes#77564
r? @ecstatic-morse
Update to chalk 0.31
Gonna assign @nikomatsakis to the review here, but since he is pretty busy recently, if anyone else wants to review this, that would be much appreciated.
r? @nikomatsakis
Support static linking with glibc and target-feature=+crt-static
With this change, it's possible to build on a linux-gnu target and pass
RUSTFLAGS='-C target-feature=+crt-static' or the equivalent via a
`.cargo/config.toml` file, and get a statically linked executable.
Update to libc 0.2.78, which adds support for static linking with glibc.
Add `crt_static_respected` to the `linux_base` target spec.
Update `android_base` and `linux_musl_base` accordingly. Avoid enabling
crt_static_respected on Android platforms, since that hasn't been
tested.
Closes https://github.com/rust-lang/rust/issues/65447.
Sometimes, a backend may need to emit warnings, errors, or otherwise
need to know the span of the current item in a basic block. So, add a
set_span method to give the backend that information.
Only check the own predicates of associated types when confirming
projection candidates.
Also consider implied bounds when comparing trait and impl methods.
Normalizing `<dyn Iterator<Item = ()> as Iterator>::Item` no longer
requires selecting `dyn Iterator<Item = ()>: Iterator`. This was
previously worked around by using a special type-folder to normalize
things.
Bounds of the form `type Future: Future<Result=Self::Result>` exist in
some ecosystem crates. To validate these bounds for trait objects we
need to normalize `Self::Result` in a way that doesn't cause a cycle.
