CFI: Don't rewrite ty::Dynamic directly
Now that we're using a type folder, the arguments in predicates are processed automatically - we don't need to descend manually.
We also want to keep projection clauses around, and this does so.
r? `@compiler-errors`
Now that we're using a type folder, the arguments in predicates are
processed automatically - we don't need to descend manually.
We also want to keep projection clauses around, and this does so.
CFI: Restore typeid_for_instance default behavior
Restore typeid_for_instance default behavior of performing self type erasure, since it's the most common case and what it does most of the time. Using concrete self (or not performing self type erasure) is for assigning a secondary type id, and secondary type ids are only assigned when they're unique and to methods, and also are only tested for when methods are used as function pointers.
Restore typeid_for_instance default behavior of performing self type
erasure, since it's the most common case and what it does most of the
time. Using concrete self (or not performing self type erasure) is for
assigning a secondary type id, and secondary type ids are only assigned
when they're unique and to methods, and also are only tested for when
methods are used as function pointers.
CFI: Support function pointers for trait methods
Adds support for both CFI and KCFI for function pointers to trait methods by attaching both concrete and abstract types to functions.
KCFI does this through generation of a `ReifyShim` on any function pointer for a method that could go into a vtable, and keeping this separate from `ReifyShim`s that are *intended* for vtable us by setting a `ReifyReason` on them.
CFI does this by setting both the concrete and abstract type on every instance.
This should land after #123024 or a similar PR, as it diverges the implementation of CFI vs KCFI.
r? `@compiler-errors`
Rename `UninhabitedEnumBranching` to `UnreachableEnumBranching`
Per [#120268](https://github.com/rust-lang/rust/pull/120268#discussion_r1517492060), I rename `UninhabitedEnumBranching` to `UnreachableEnumBranching` .
I solved some nits to add some comments.
I adjusted the workaround restrictions. This should be useful for `a <= b` and `if let Some/Ok(v)`. For enum with few variants, `early-tailduplication` should not cause compile time overhead.
r? RalfJung
Add `Ord::cmp` for primitives as a `BinOp` in MIR
Update: most of this OP was written months ago. See https://github.com/rust-lang/rust/pull/118310#issuecomment-2016940014 below for where we got to recently that made it ready for review.
---
There are dozens of reasonable ways to implement `Ord::cmp` for integers using comparison, bit-ops, and branches. Those differences are irrelevant at the rust level, however, so we can make things better by adding `BinOp::Cmp` at the MIR level:
1. Exactly how to implement it is left up to the backends, so LLVM can use whatever pattern its optimizer best recognizes and cranelift can use whichever pattern codegens the fastest.
2. By not inlining those details for every use of `cmp`, we drastically reduce the amount of MIR generated for `derive`d `PartialOrd`, while also making it more amenable to MIR-level optimizations.
Having extremely careful `if` ordering to μoptimize resource usage on broadwell (#63767) is great, but it really feels to me like libcore is the wrong place to put that logic. Similarly, using subtraction [tricks](https://graphics.stanford.edu/~seander/bithacks.html#CopyIntegerSign) (#105840) is arguably even nicer, but depends on the optimizer understanding it (https://github.com/llvm/llvm-project/issues/73417) to be practical. Or maybe [bitor is better than add](https://discourse.llvm.org/t/representing-in-ir/67369/2?u=scottmcm)? But maybe only on a future version that [has `or disjoint` support](https://discourse.llvm.org/t/rfc-add-or-disjoint-flag/75036?u=scottmcm)? And just because one of those forms happens to be good for LLVM, there's no guarantee that it'd be the same form that GCC or Cranelift would rather see -- especially given their very different optimizers. Not to mention that if LLVM gets a spaceship intrinsic -- [which it should](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Suboptimal.20inlining.20in.20std.20function.20.60binary_search.60/near/404250586) -- we'll need at least a rustc intrinsic to be able to call it.
As for simplifying it in Rust, we now regularly inline `{integer}::partial_cmp`, but it's quite a large amount of IR. The best way to see that is with 8811efa88b (diff-d134c32d028fbe2bf835fef2df9aca9d13332dd82284ff21ee7ebf717bfa4765R113) -- I added a new pre-codegen MIR test for a simple 3-tuple struct, and this PR change it from 36 locals and 26 basic blocks down to 24 locals and 8 basic blocks. Even better, as soon as the construct-`Some`-then-match-it-in-same-BB noise is cleaned up, this'll expose the `Cmp == 0` branches clearly in MIR, so that an InstCombine (#105808) can simplify that to just a `BinOp::Eq` and thus fix some of our generated code perf issues. (Tracking that through today's `if a < b { Less } else if a == b { Equal } else { Greater }` would be *much* harder.)
---
r? `@ghost`
But first I should check that perf is ok with this
~~...and my true nemesis, tidy.~~
This is just one part of the MCP, but it's the one that IMHO removes the most noise from the standard library code.
Seems net simpler this way, since MIR already supported heterogeneous shifts anyway, and thus it's not more work for backends than before.
Remove len argument from RawVec::reserve_for_push
Removes `RawVec::reserve_for_push`'s `len` argument since it's always the same as capacity.
Also makes `Vec::insert` use `RawVec::reserve_for_push`.
CFI: Fix methods as function pointer cast
Fix casting between methods and function pointers by assigning a secondary type id to methods with their concrete self so they can be used as function pointers.
This was split off from #116404.
cc `@compiler-errors` `@workingjubilee`
Codegen const panic messages as function calls
This skips emitting extra arguments at every callsite (of which there
can be many). For a librustc_driver build with overflow checks enabled,
this cuts 0.7MB from the resulting shared library (see [perf]).
A sample improvement from nightly:
```
leaq str.0(%rip), %rdi
leaq .Lalloc_d6aeb8e2aa19de39a7f0e861c998af13(%rip), %rdx
movl $25, %esi
callq *_ZN4core9panicking5panic17h17cabb89c5bcc999E@GOTPCREL(%rip)
```
to this PR:
```
leaq .Lalloc_d6aeb8e2aa19de39a7f0e861c998af13(%rip), %rdi
callq *_RNvNtNtCsduqIKoij8JB_4core9panicking11panic_const23panic_const_div_by_zero@GOTPCREL(%rip)
```
[perf]: https://perf.rust-lang.org/compare.html?start=a7e4de13c1785819f4d61da41f6704ed69d5f203&end=64fbb4f0b2d621ff46d559d1e9f5ad89a8d7789b&stat=instructions:u
Fix casting between methods and function pointers by assigning a
secondary type id to methods with their concrete self so they can be
used as function pointers.
CFI: Fix drop and drop_in_place
Fix drop and drop_in_place by transforming self of drop and drop_in_place methods into a Drop trait objects.
This was split off from https://github.com/rust-lang/rust/pull/116404.
cc `@compiler-errors` `@workingjubilee`
CFI: Support self_cell-like recursion
Current `transform_ty` attempts to avoid cycles when normalizing `#[repr(transparent)]` types to their interior, but runs afoul of this pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By using a types-visited list, this will instead get expanded exactly one layer deep to X<Y>, and then stop, not attempting to normalize `Y` any further.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? ``````@workingjubilee``````
Let codegen decide when to `mem::swap` with immediates
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
Thus this PR introduces a new `typed_swap` intrinsic with a fallback body, and replaces that fallback implementation when swapping immediates or scalar pairs.
r? oli-obk
Replaces #111744, and means we'll never need more libs PRs like #111803 or #107140
Current `transform_ty` attempts to avoid cycles when normalizing
`#[repr(transparent)]` types to their interior, but runs afoul of this
pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By
using a types-visited list, this will instead get expanded exactly
one layer deep to X<Y>, and then stop, not attempting to normalize `Y`
any further.
This skips emitting extra arguments at every callsite (of which there
can be many). For a librustc_driver build with overflow checks enabled,
this cuts 0.7MB from the resulting binary.
CFI: Skip non-passed arguments
Rust will occasionally rely on fn((), X) -> Y being compatible with fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not to encode non-passed arguments.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? `@workingjubilee`
Rust will occasionally rely on fn((), X) -> Y being compatible with
fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not
to encode non-passed arguments.
CFI: Break tests into smaller files
Break type metadata identifiers tests into smaller set of tests/files, and move CFI (and KCFI) codegen tests to a cfi (and kcfi) subdirectory,
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
So introduce a new `typed_swap` intrinsic with a fallback body, but replace that implementation for immediates and scalar pairs.
Tests added in cast-target-abi.rs, covering the single element, array,
and prefix cases in `CastTarget::llvm_type`, and the Rust-is-larger/smaller
cases in the Rust<->ABI copying code.
ffi-out-of-bounds-loads.rs was overhauled to be runnable on any
platform. Its alignment also increases due to the removal of a `min` in
the previous commit; this was probably an insufficient workaround for
this issue or similar. The higher alignment is fine, since the alloca is
actually aligned to 8 bytes, as the test checks now confirm.
Stop walking the bodies of statics for reachability, and evaluate them instead
cc `@saethlin` `@RalfJung`
cc #119214
This reuses the `DefIdVisitor` from `rustc_privacy`, because they basically try to do the same thing.
This PR's changes can probably be extended to constants, too, but let's tackle that separately, it's likely more involved.
Represent `Result<usize, Box<T>>` as ScalarPair(i64, ptr)
This allows types like `Result<usize, std::io::Error>` (and integers of differing sign, e.g. `Result<u64, i64>`) to be passed in a pair of registers instead of through memory, like `Result<u64, u64>` or `Result<Box<T>, Box<U>>` are today.
Fixes#97540.
r? `@ghost`
Lower transmutes from int to pointer type as gep on null
I thought of this while looking at https://github.com/rust-lang/rust/pull/121242. See that PR's description for why this lowering is preferable.
The UI test that's being changed here crashes without changing the transmutes into casts. Based on that, this PR should not be merged without a crater build-and-test run.
Test wasm32-wasip1 in CI, not wasm32-unknown-unknown
This commit changes CI to no longer test the `wasm32-unknown-unknown` target and instead test the `wasm32-wasip1` target. There was some discussion of this in a [Zulip thread], and the motivations for this PR are:
* Runtime failures on `wasm32-unknown-unknown` print nothing, meaning all you get is "something failed". In contrast `wasm32-wasip1` can print to stdout/stderr.
* The unknown-unknown target is missing lots of pieces of libstd, and while `wasm32-wasip1` is also missing some pieces (e.g. threads) it's missing fewer pieces. This means that many more tests can be run.
Overall my hope is to improve the debuggability of wasm failures on CI and ideally be a bit less of a maintenance burden.
This commit specifically removes the testing of `wasm32-unknown-unknown` and replaces it with testing of `wasm32-wasip1`. Along the way there were a number of other archiectural changes made as well, including:
* A new `target.*.runtool` option can now be specified in `config.toml` which is passed as `--runtool` to `compiletest`. This is used to reimplement execution of WebAssembly in a less-wasm-specific fashion.
* The default value for `runtool` is an ambiently located WebAssembly runtime found on the system, if any. I've implemented logic for Wasmtime.
* Existing testing support for `wasm32-unknown-unknown` and Emscripten has been removed. I'm not aware of Emscripten testing being run any time recently and otherwise `wasm32-wasip1` is in theory the focus now.
* I've added a new `//@ needs-threads` directive for `compiletest` and classified a bunch of wasm-ignored tests as needing threads. In theory these tests can run on `wasm32-wasi-preview1-threads`, for example.
* I've tried to audit all existing tests that are either `ignore-emscripten` or `ignore-wasm*`. Many now run on `wasm32-wasip1` due to being able to emit error messages, for example. Many are updated with comments as to why they can't run as well.
* The `compiletest` output matching for `wasm32-wasip1` automatically uses "match a subset" mode implemented in `compiletest`. This is because WebAssembly runtimes often add extra information on failure, such as the `unreachable` instruction in `panic!`, which isn't able to be matched against the golden output from native platforms.
* I've ported most existing `run-make` tests that use custom Node.js wrapper scripts to the new run-make-based-in-Rust infrastructure. To do this I added `wasmparser` as a dependency of `run-make-support` for the various wasm tests to use that parse wasm files. The one test that executed WebAssembly now uses `wasmtime`-the-CLI to execute the test instead. I have not ported over an exception-handling test as Wasmtime doesn't implement this yet.
* I've updated the `test` crate to print out timing information for WASI targets as it can do that (gets a previously ignored test now passing).
* The `test-various` image now builds a WASI sysroot for the WASI target and additionally downloads a fixed release of Wasmtime, currently the latest one at 18.0.2, and uses that for testing.
[Zulip thread]: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Have.20wasm.20tests.20ever.20caused.20problems.20on.20CI.3F/near/424317944
* The WASI targets deal with the `main` symbol a bit differently than
native so some `codegen` and `assembly` tests have been ignored.
* All `ignore-emscripten` directives have been updated to
`ignore-wasm32` to be more clear that all wasm targets are ignored and
it's not just Emscripten.
* Most `ignore-wasm32-bare` directives are now gone.
* Some ignore directives for wasm were switched to `needs-unwind`
instead.
* Many `ignore-wasm32*` directives are removed as the tests work with
WASI as opposed to `wasm32-unknown-unknown`.
